|  | /* ###################################################################### | 
|  |  | 
|  | Tempustech VMAX SBC301 MTD Driver. | 
|  |  | 
|  | The VMAx 301 is a SBC based on . It | 
|  | comes with three builtin AMD 29F016B flash chips and a socket for SRAM or | 
|  | more flash. Each unit has it's own 8k mapping into a settable region | 
|  | (0xD8000). There are two 8k mappings for each MTD, the first is always set | 
|  | to the lower 8k of the device the second is paged. Writing a 16 bit page | 
|  | value to anywhere in the first 8k will cause the second 8k to page around. | 
|  |  | 
|  | To boot the device a bios extension must be installed into the first 8k | 
|  | of flash that is smart enough to copy itself down, page in the rest of | 
|  | itself and begin executing. | 
|  |  | 
|  | ##################################################################### */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include <linux/mtd/map.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  |  | 
|  |  | 
|  | #define WINDOW_START 0xd8000 | 
|  | #define WINDOW_LENGTH 0x2000 | 
|  | #define WINDOW_SHIFT 25 | 
|  | #define WINDOW_MASK 0x1FFF | 
|  |  | 
|  | /* Actually we could use two spinlocks, but we'd have to have | 
|  | more private space in the struct map_info. We lose a little | 
|  | performance like this, but we'd probably lose more by having | 
|  | the extra indirection from having one of the map->map_priv | 
|  | fields pointing to yet another private struct. | 
|  | */ | 
|  | static DEFINE_SPINLOCK(vmax301_spin); | 
|  |  | 
|  | static void __vmax301_page(struct map_info *map, unsigned long page) | 
|  | { | 
|  | writew(page, map->map_priv_2 - WINDOW_LENGTH); | 
|  | map->map_priv_1 = page; | 
|  | } | 
|  |  | 
|  | static inline void vmax301_page(struct map_info *map, | 
|  | unsigned long ofs) | 
|  | { | 
|  | unsigned long page = (ofs >> WINDOW_SHIFT); | 
|  | if (map->map_priv_1 != page) | 
|  | __vmax301_page(map, page); | 
|  | } | 
|  |  | 
|  | static map_word vmax301_read8(struct map_info *map, unsigned long ofs) | 
|  | { | 
|  | map_word ret; | 
|  | spin_lock(&vmax301_spin); | 
|  | vmax301_page(map, ofs); | 
|  | ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK)); | 
|  | spin_unlock(&vmax301_spin); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) | 
|  | { | 
|  | while(len) { | 
|  | unsigned long thislen = len; | 
|  | if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) | 
|  | thislen = WINDOW_LENGTH-(from & WINDOW_MASK); | 
|  | spin_lock(&vmax301_spin); | 
|  | vmax301_page(map, from); | 
|  | memcpy_fromio(to, map->map_priv_2 + from, thislen); | 
|  | spin_unlock(&vmax301_spin); | 
|  | to += thislen; | 
|  | from += thislen; | 
|  | len -= thislen; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr) | 
|  | { | 
|  | spin_lock(&vmax301_spin); | 
|  | vmax301_page(map, adr); | 
|  | writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK)); | 
|  | spin_unlock(&vmax301_spin); | 
|  | } | 
|  |  | 
|  | static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) | 
|  | { | 
|  | while(len) { | 
|  | unsigned long thislen = len; | 
|  | if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) | 
|  | thislen = WINDOW_LENGTH-(to & WINDOW_MASK); | 
|  |  | 
|  | spin_lock(&vmax301_spin); | 
|  | vmax301_page(map, to); | 
|  | memcpy_toio(map->map_priv_2 + to, from, thislen); | 
|  | spin_unlock(&vmax301_spin); | 
|  | to += thislen; | 
|  | from += thislen; | 
|  | len -= thislen; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct map_info vmax_map[2] = { | 
|  | { | 
|  | .name = "VMAX301 Internal Flash", | 
|  | .phys = NO_XIP, | 
|  | .size = 3*2*1024*1024, | 
|  | .bankwidth = 1, | 
|  | .read = vmax301_read8, | 
|  | .copy_from = vmax301_copy_from, | 
|  | .write = vmax301_write8, | 
|  | .copy_to = vmax301_copy_to, | 
|  | .map_priv_1 = WINDOW_START + WINDOW_LENGTH, | 
|  | .map_priv_2 = 0xFFFFFFFF | 
|  | }, | 
|  | { | 
|  | .name = "VMAX301 Socket", | 
|  | .phys = NO_XIP, | 
|  | .size = 0, | 
|  | .bankwidth = 1, | 
|  | .read = vmax301_read8, | 
|  | .copy_from = vmax301_copy_from, | 
|  | .write = vmax301_write8, | 
|  | .copy_to = vmax301_copy_to, | 
|  | .map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH), | 
|  | .map_priv_2 = 0xFFFFFFFF | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct mtd_info *vmax_mtd[2] = {NULL, NULL}; | 
|  |  | 
|  | static void __exit cleanup_vmax301(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i=0; i<2; i++) { | 
|  | if (vmax_mtd[i]) { | 
|  | del_mtd_device(vmax_mtd[i]); | 
|  | map_destroy(vmax_mtd[i]); | 
|  | } | 
|  | } | 
|  | iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START); | 
|  | } | 
|  |  | 
|  | int __init init_vmax301(void) | 
|  | { | 
|  | int i; | 
|  | unsigned long iomapadr; | 
|  | // Print out our little header.. | 
|  | printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START, | 
|  | WINDOW_START+4*WINDOW_LENGTH); | 
|  |  | 
|  | iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4); | 
|  | if (!iomapadr) { | 
|  | printk("Failed to ioremap memory region\n"); | 
|  | return -EIO; | 
|  | } | 
|  | /* Put the address in the map's private data area. | 
|  | We store the actual MTD IO address rather than the | 
|  | address of the first half, because it's used more | 
|  | often. | 
|  | */ | 
|  | vmax_map[0].map_priv_2 = iomapadr + WINDOW_START; | 
|  | vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START); | 
|  |  | 
|  | for (i=0; i<2; i++) { | 
|  | vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]); | 
|  | if (!vmax_mtd[i]) | 
|  | vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]); | 
|  | if (!vmax_mtd[i]) | 
|  | vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]); | 
|  | if (!vmax_mtd[i]) | 
|  | vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]); | 
|  | if (vmax_mtd[i]) { | 
|  | vmax_mtd[i]->owner = THIS_MODULE; | 
|  | add_mtd_device(vmax_mtd[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!vmax_mtd[0] && !vmax_mtd[1]) { | 
|  | iounmap((void *)iomapadr); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_init(init_vmax301); | 
|  | module_exit(cleanup_vmax301); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); | 
|  | MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board"); |