mfd: Add support for RICOH PMIC RC5T583
Ricoh power management IC RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators, gpios, interrupt
controllers, on-key, RTCs, ADCs.
This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
new file mode 100644
index 0000000..a2c6160
--- /dev/null
+++ b/include/linux/mfd/rc5t583.h
@@ -0,0 +1,295 @@
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ * Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS 0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT 5
+#define RC5T583_MAX_GPEDGE_REG 2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS 9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1 0x19
+#define RC5T583_INT_EN_SYS2 0x1D
+#define RC5T583_INT_EN_DCDC 0x41
+#define RC5T583_INT_EN_RTC 0xED
+#define RC5T583_INT_EN_ADC1 0x90
+#define RC5T583_INT_EN_ADC2 0x91
+#define RC5T583_INT_EN_ADC3 0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL 0xAD
+#define RC5T583_INTC_INTEN 0xAE
+#define RC5T583_INTC_INTMON 0xAF
+
+#define RC5T583_INT_MON_GRP 0xAF
+#define RC5T583_INT_MON_SYS1 0x1B
+#define RC5T583_INT_MON_SYS2 0x1F
+#define RC5T583_INT_MON_DCDC 0x43
+#define RC5T583_INT_MON_RTC 0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1 0x1A
+#define RC5T583_INT_IR_SYS2 0x1E
+#define RC5T583_INT_IR_DCDC 0x42
+#define RC5T583_INT_IR_RTC 0xEE
+#define RC5T583_INT_IR_ADCL 0x94
+#define RC5T583_INT_IR_ADCH 0x95
+#define RC5T583_INT_IR_ADCEND 0x96
+#define RC5T583_INT_IR_GPIOR 0xA9
+#define RC5T583_INT_IR_GPIOF 0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1 0x21
+#define RC5T583_SLPSEQ2 0x22
+#define RC5T583_SLPSEQ3 0x23
+#define RC5T583_SLPSEQ4 0x24
+#define RC5T583_SLPSEQ5 0x25
+#define RC5T583_SLPSEQ6 0x26
+#define RC5T583_SLPSEQ7 0x27
+#define RC5T583_SLPSEQ8 0x28
+#define RC5T583_SLPSEQ9 0x29
+#define RC5T583_SLPSEQ10 0x2A
+#define RC5T583_SLPSEQ11 0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL 0x30
+#define RC5T583_REG_DC0DAC 0x31
+#define RC5T583_REG_DC0LATCTL 0x32
+#define RC5T583_REG_SR0CTL 0x33
+
+#define RC5T583_REG_DC1CTL 0x34
+#define RC5T583_REG_DC1DAC 0x35
+#define RC5T583_REG_DC1LATCTL 0x36
+#define RC5T583_REG_SR1CTL 0x37
+
+#define RC5T583_REG_DC2CTL 0x38
+#define RC5T583_REG_DC2DAC 0x39
+#define RC5T583_REG_DC2LATCTL 0x3A
+#define RC5T583_REG_SR2CTL 0x3B
+
+#define RC5T583_REG_DC3CTL 0x3C
+#define RC5T583_REG_DC3DAC 0x3D
+#define RC5T583_REG_DC3LATCTL 0x3E
+#define RC5T583_REG_SR3CTL 0x3F
+
+
+#define RC5T583_REG_LDOEN1 0x50
+#define RC5T583_REG_LDOEN2 0x51
+#define RC5T583_REG_LDODIS1 0x52
+#define RC5T583_REG_LDODIS2 0x53
+
+#define RC5T583_REG_LDO0DAC 0x54
+#define RC5T583_REG_LDO1DAC 0x55
+#define RC5T583_REG_LDO2DAC 0x56
+#define RC5T583_REG_LDO3DAC 0x57
+#define RC5T583_REG_LDO4DAC 0x58
+#define RC5T583_REG_LDO5DAC 0x59
+#define RC5T583_REG_LDO6DAC 0x5A
+#define RC5T583_REG_LDO7DAC 0x5B
+#define RC5T583_REG_LDO8DAC 0x5C
+#define RC5T583_REG_LDO9DAC 0x5D
+
+#define RC5T583_REG_DC0DAC_DS 0x60
+#define RC5T583_REG_DC1DAC_DS 0x61
+#define RC5T583_REG_DC2DAC_DS 0x62
+#define RC5T583_REG_DC3DAC_DS 0x63
+
+#define RC5T583_REG_LDO0DAC_DS 0x64
+#define RC5T583_REG_LDO1DAC_DS 0x65
+#define RC5T583_REG_LDO2DAC_DS 0x66
+#define RC5T583_REG_LDO3DAC_DS 0x67
+#define RC5T583_REG_LDO4DAC_DS 0x68
+#define RC5T583_REG_LDO5DAC_DS 0x69
+#define RC5T583_REG_LDO6DAC_DS 0x6A
+#define RC5T583_REG_LDO7DAC_DS 0x6B
+#define RC5T583_REG_LDO8DAC_DS 0x6C
+#define RC5T583_REG_LDO9DAC_DS 0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL 0xA0
+#define RC5T583_GPIO_PDEN 0xA1
+#define RC5T583_GPIO_IOOUT 0xA2
+#define RC5T583_GPIO_PGSEL 0xA3
+#define RC5T583_GPIO_GPINV 0xA4
+#define RC5T583_GPIO_GPDEB 0xA5
+#define RC5T583_GPIO_GPEDGE1 0xA6
+#define RC5T583_GPIO_GPEDGE2 0xA7
+#define RC5T583_GPIO_EN_INT 0xA8
+#define RC5T583_GPIO_MON_IOIN 0xAB
+#define RC5T583_GPIO_GPOFUNC 0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+ RC5T583_IRQ_ONKEY,
+ RC5T583_IRQ_ACOK,
+ RC5T583_IRQ_LIDOPEN,
+ RC5T583_IRQ_PREOT,
+ RC5T583_IRQ_CLKSTP,
+ RC5T583_IRQ_ONKEY_OFF,
+ RC5T583_IRQ_WD,
+ RC5T583_IRQ_EN_PWRREQ1,
+ RC5T583_IRQ_EN_PWRREQ2,
+ RC5T583_IRQ_PRE_VINDET,
+
+ RC5T583_IRQ_DC0LIM,
+ RC5T583_IRQ_DC1LIM,
+ RC5T583_IRQ_DC2LIM,
+ RC5T583_IRQ_DC3LIM,
+
+ RC5T583_IRQ_CTC,
+ RC5T583_IRQ_YALE,
+ RC5T583_IRQ_DALE,
+ RC5T583_IRQ_WALE,
+
+ RC5T583_IRQ_AIN1L,
+ RC5T583_IRQ_AIN2L,
+ RC5T583_IRQ_AIN3L,
+ RC5T583_IRQ_VBATL,
+ RC5T583_IRQ_VIN3L,
+ RC5T583_IRQ_VIN8L,
+ RC5T583_IRQ_AIN1H,
+ RC5T583_IRQ_AIN2H,
+ RC5T583_IRQ_AIN3H,
+ RC5T583_IRQ_VBATH,
+ RC5T583_IRQ_VIN3H,
+ RC5T583_IRQ_VIN8H,
+ RC5T583_IRQ_ADCEND,
+
+ RC5T583_IRQ_GPIO0,
+ RC5T583_IRQ_GPIO1,
+ RC5T583_IRQ_GPIO2,
+ RC5T583_IRQ_GPIO3,
+ RC5T583_IRQ_GPIO4,
+ RC5T583_IRQ_GPIO5,
+ RC5T583_IRQ_GPIO6,
+ RC5T583_IRQ_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+ RC5T583_GPIO0,
+ RC5T583_GPIO1,
+ RC5T583_GPIO2,
+ RC5T583_GPIO3,
+ RC5T583_GPIO4,
+ RC5T583_GPIO5,
+ RC5T583_GPIO6,
+ RC5T583_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_GPIO,
+};
+
+enum {
+ RC5T583_DS_NONE,
+ RC5T583_DS_DC0,
+ RC5T583_DS_DC1,
+ RC5T583_DS_DC2,
+ RC5T583_DS_DC3,
+ RC5T583_DS_LDO0,
+ RC5T583_DS_LDO1,
+ RC5T583_DS_LDO2,
+ RC5T583_DS_LDO3,
+ RC5T583_DS_LDO4,
+ RC5T583_DS_LDO5,
+ RC5T583_DS_LDO6,
+ RC5T583_DS_LDO7,
+ RC5T583_DS_LDO8,
+ RC5T583_DS_LDO9,
+ RC5T583_DS_PSO0,
+ RC5T583_DS_PSO1,
+ RC5T583_DS_PSO2,
+ RC5T583_DS_PSO3,
+ RC5T583_DS_PSO4,
+ RC5T583_DS_PSO5,
+ RC5T583_DS_PSO6,
+ RC5T583_DS_PSO7,
+
+ /* Should be last entry */
+ RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+ RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+ RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+ struct device *dev;
+ struct regmap *regmap;
+ int chip_irq;
+ int irq_base;
+ struct mutex irq_lock;
+ unsigned long group_irq_en[MAX_MAIN_INTERRUPT];
+
+ /* For main interrupt bits in INTC */
+ uint8_t intc_inten_reg;
+
+ /* For group interrupt bits and address */
+ uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+ /* For gpio edge */
+ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+ int irq_base;
+ bool enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+ unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+ int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif