msm: board-8930: add 8930 regulator board file
Add an MSM8930 regulator board file to support the PMIC PM8038
regulators. Also add support for the 5V boost regulator and the
USB OTG voltage switch.
Change-Id: I6cc3254230f7dd00604c1c0aaf9e56299d7673b6
Signed-off-by: David Collins <collinsd@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-8930-regulator.c b/arch/arm/mach-msm/board-8930-regulator.c
new file mode 100644
index 0000000..043ed88
--- /dev/null
+++ b/arch/arm/mach-msm/board-8930-regulator.c
@@ -0,0 +1,316 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/regulator/pm8xxx-regulator.h>
+
+#include "board-8930.h"
+
+#define VREG_CONSUMERS(_id) \
+ static struct regulator_consumer_supply vreg_consumers_##_id[]
+
+/*
+ * Consumer specific regulator names:
+ * regulator name consumer dev_name
+ */
+VREG_CONSUMERS(L1) = {
+ REGULATOR_SUPPLY("8038_l1", NULL),
+};
+VREG_CONSUMERS(L2) = {
+ REGULATOR_SUPPLY("8038_l2", NULL),
+};
+VREG_CONSUMERS(L3) = {
+ REGULATOR_SUPPLY("8038_l3", NULL),
+};
+VREG_CONSUMERS(L4) = {
+ REGULATOR_SUPPLY("8038_l4", NULL),
+};
+VREG_CONSUMERS(L5) = {
+ REGULATOR_SUPPLY("8038_l5", NULL),
+};
+VREG_CONSUMERS(L6) = {
+ REGULATOR_SUPPLY("8038_l6", NULL),
+};
+VREG_CONSUMERS(L7) = {
+ REGULATOR_SUPPLY("8038_l7", NULL),
+};
+VREG_CONSUMERS(L8) = {
+ REGULATOR_SUPPLY("8038_l8", NULL),
+};
+VREG_CONSUMERS(L9) = {
+ REGULATOR_SUPPLY("8038_l9", NULL),
+};
+VREG_CONSUMERS(L10) = {
+ REGULATOR_SUPPLY("8038_l10", NULL),
+};
+VREG_CONSUMERS(L11) = {
+ REGULATOR_SUPPLY("8038_l11", NULL),
+};
+VREG_CONSUMERS(L12) = {
+ REGULATOR_SUPPLY("8038_l12", NULL),
+};
+VREG_CONSUMERS(L14) = {
+ REGULATOR_SUPPLY("8038_l14", NULL),
+};
+VREG_CONSUMERS(L15) = {
+ REGULATOR_SUPPLY("8038_l15", NULL),
+};
+VREG_CONSUMERS(L16) = {
+ REGULATOR_SUPPLY("8038_l16", NULL),
+};
+VREG_CONSUMERS(L17) = {
+ REGULATOR_SUPPLY("8038_l17", NULL),
+};
+VREG_CONSUMERS(L18) = {
+ REGULATOR_SUPPLY("8038_l18", NULL),
+};
+VREG_CONSUMERS(L19) = {
+ REGULATOR_SUPPLY("8038_l19", NULL),
+};
+VREG_CONSUMERS(L20) = {
+ REGULATOR_SUPPLY("8038_l20", NULL),
+};
+VREG_CONSUMERS(L21) = {
+ REGULATOR_SUPPLY("8038_l21", NULL),
+};
+VREG_CONSUMERS(L22) = {
+ REGULATOR_SUPPLY("8038_l22", NULL),
+};
+VREG_CONSUMERS(L23) = {
+ REGULATOR_SUPPLY("8038_l23", NULL),
+};
+VREG_CONSUMERS(L24) = {
+ REGULATOR_SUPPLY("8038_l24", NULL),
+};
+VREG_CONSUMERS(L26) = {
+ REGULATOR_SUPPLY("8038_l26", NULL),
+};
+VREG_CONSUMERS(L27) = {
+ REGULATOR_SUPPLY("8038_l27", NULL),
+};
+VREG_CONSUMERS(S1) = {
+ REGULATOR_SUPPLY("8038_s1", NULL),
+};
+VREG_CONSUMERS(S2) = {
+ REGULATOR_SUPPLY("8038_s2", NULL),
+};
+VREG_CONSUMERS(S3) = {
+ REGULATOR_SUPPLY("8038_s3", NULL),
+};
+VREG_CONSUMERS(S4) = {
+ REGULATOR_SUPPLY("8038_s4", NULL),
+};
+VREG_CONSUMERS(S5) = {
+ REGULATOR_SUPPLY("8038_s5", NULL),
+};
+VREG_CONSUMERS(S6) = {
+ REGULATOR_SUPPLY("8038_s6", NULL),
+};
+VREG_CONSUMERS(LVS1) = {
+ REGULATOR_SUPPLY("8038_lvs1", NULL),
+};
+VREG_CONSUMERS(LVS2) = {
+ REGULATOR_SUPPLY("8038_lvs2", NULL),
+};
+VREG_CONSUMERS(EXT_5V) = {
+ REGULATOR_SUPPLY("ext_5v", NULL),
+};
+VREG_CONSUMERS(EXT_OTG_SW) = {
+ REGULATOR_SUPPLY("ext_otg_sw", NULL),
+};
+
+#define PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, _modes, _ops, \
+ _apply_uV, _pull_down, _always_on, _supply_regulator, \
+ _system_uA, _enable_time, _reg_id) \
+ { \
+ .init_data = { \
+ .constraints = { \
+ .valid_modes_mask = _modes, \
+ .valid_ops_mask = _ops, \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .input_uV = _max_uV, \
+ .apply_uV = _apply_uV, \
+ .always_on = _always_on, \
+ .name = _name, \
+ }, \
+ .num_consumer_supplies = \
+ ARRAY_SIZE(vreg_consumers_##_id), \
+ .consumer_supplies = vreg_consumers_##_id, \
+ .supply_regulator = _supply_regulator, \
+ }, \
+ .id = _reg_id, \
+ .pull_down_enable = _pull_down, \
+ .system_uA = _system_uA, \
+ .enable_time = _enable_time, \
+ }
+
+#define PM8XXX_LDO(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
+ _enable_time, _supply_regulator, _system_uA, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+ | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+ _supply_regulator, _system_uA, _enable_time, _reg_id)
+
+#define PM8XXX_NLDO1200(_id, _name, _always_on, _pull_down, _min_uV, \
+ _max_uV, _enable_time, _supply_regulator, _system_uA, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+ | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+ _supply_regulator, _system_uA, _enable_time, _reg_id)
+
+#define PM8XXX_SMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
+ _enable_time, _supply_regulator, _system_uA, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \
+ | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \
+ REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \
+ _supply_regulator, _system_uA, _enable_time, _reg_id)
+
+#define PM8XXX_FTSMPS(_id, _name, _always_on, _pull_down, _min_uV, _max_uV, \
+ _enable_time, _supply_regulator, _system_uA, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, REGULATOR_MODE_NORMAL, \
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS \
+ | REGULATOR_CHANGE_MODE, 0, _pull_down, _always_on, \
+ _supply_regulator, _system_uA, _enable_time, _reg_id)
+
+#define PM8XXX_VS(_id, _name, _always_on, _pull_down, _enable_time, \
+ _supply_regulator, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
+ _pull_down, _always_on, _supply_regulator, 0, _enable_time, \
+ _reg_id)
+
+#define PM8XXX_VS300(_id, _name, _always_on, _pull_down, _enable_time, \
+ _supply_regulator, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, \
+ _pull_down, _always_on, _supply_regulator, 0, _enable_time, \
+ _reg_id)
+
+#define PM8XXX_NCP(_id, _name, _always_on, _min_uV, _max_uV, _enable_time, \
+ _supply_regulator, _reg_id) \
+ PM8XXX_VREG_INIT(_id, _name, _min_uV, _max_uV, 0, \
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, 0, 0, \
+ _always_on, _supply_regulator, 0, _enable_time, _reg_id)
+
+/* Pin control initialization */
+#define PM8XXX_PC(_id, _name, _always_on, _pin_fn, _pin_ctrl, \
+ _supply_regulator, _reg_id) \
+ { \
+ .init_data = { \
+ .constraints = { \
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS, \
+ .always_on = _always_on, \
+ .name = _name, \
+ }, \
+ .num_consumer_supplies = \
+ ARRAY_SIZE(vreg_consumers_##_id##_PC), \
+ .consumer_supplies = vreg_consumers_##_id##_PC, \
+ .supply_regulator = _supply_regulator, \
+ }, \
+ .id = _reg_id, \
+ .pin_fn = PM8XXX_VREG_PIN_FN_##_pin_fn, \
+ .pin_ctrl = _pin_ctrl, \
+ }
+
+#define GPIO_VREG(_id, _reg_name, _gpio_label, _gpio, _supply_regulator) \
+ [MSM8930_GPIO_VREG_ID_##_id] = { \
+ .init_data = { \
+ .constraints = { \
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS, \
+ }, \
+ .num_consumer_supplies = \
+ ARRAY_SIZE(vreg_consumers_##_id), \
+ .consumer_supplies = vreg_consumers_##_id, \
+ .supply_regulator = _supply_regulator, \
+ }, \
+ .regulator_name = _reg_name, \
+ .gpio_label = _gpio_label, \
+ .gpio = _gpio, \
+ }
+
+/* GPIO regulator constraints */
+struct gpio_regulator_platform_data
+msm8930_gpio_regulator_pdata[] __devinitdata = {
+ /* ID vreg_name gpio_label gpio supply */
+ GPIO_VREG(EXT_5V, "ext_5v", "ext_5v_en", 63, NULL),
+ GPIO_VREG(EXT_OTG_SW, "ext_otg_sw", "ext_otg_sw_en", 97, "ext_5v"),
+};
+
+/* PM8038 regulator constraints */
+struct pm8xxx_regulator_platform_data
+msm8930_pm8038_regulator_pdata[] __devinitdata = {
+ /*
+ * ID name always_on pd min_uV max_uV en_t supply
+ * system_uA reg_ID
+ */
+ PM8XXX_SMPS(S1, "8038_s1", 1, 1, 1150000, 1150000, 500, NULL, 100000,
+ 26),
+ PM8XXX_SMPS(S2, "8038_s2", 1, 1, 1400000, 1400000, 500, NULL, 100000,
+ 27),
+ PM8XXX_SMPS(S3, "8038_s3", 0, 1, 1150000, 1150000, 500, NULL, 0, 28),
+ PM8XXX_SMPS(S4, "8038_s4", 1, 1, 2200000, 2200000, 500, NULL, 100000,
+ 29),
+
+ PM8XXX_FTSMPS(S5, "8038_s5", 0, 1, 950000, 1150000, 500, NULL, 0, 30),
+ PM8XXX_FTSMPS(S6, "8038_s6", 0, 1, 950000, 1150000, 500, NULL, 0, 31),
+
+ PM8XXX_NLDO1200(L1, "8038_l1", 0, 1, 1300000, 1300000, 200, "8038_s2",
+ 0, 1),
+ PM8XXX_LDO(L2, "8038_l2", 0, 1, 1200000, 1200000, 200, "8038_s2", 0,
+ 2),
+ PM8XXX_LDO(L3, "8038_l3", 0, 1, 3075000, 3075000, 200, NULL, 0, 3),
+ PM8XXX_LDO(L4, "8038_l4", 1, 1, 1800000, 1800000, 200, NULL, 10000,
+ 4),
+ PM8XXX_LDO(L5, "8038_l5", 0, 1, 2950000, 2950000, 200, NULL, 0, 5),
+ PM8XXX_LDO(L6, "8038_l6", 0, 1, 2950000, 2950000, 200, NULL, 0, 6),
+ PM8XXX_LDO(L7, "8038_l7", 0, 1, 2050000, 2050000, 200, "8038_s4", 0,
+ 7),
+ PM8XXX_LDO(L8, "8038_l8", 0, 1, 2800000, 2800000, 200, NULL, 0, 8),
+ PM8XXX_LDO(L9, "8038_l9", 0, 1, 2850000, 2850000, 200, NULL, 0, 9),
+ PM8XXX_LDO(L10, "8038_l10", 0, 1, 2900000, 2900000, 200, NULL, 0, 10),
+ PM8XXX_LDO(L11, "8038_l11", 1, 1, 1800000, 1800000, 200, "8038_s4",
+ 10000, 11),
+ PM8XXX_LDO(L12, "8038_l12", 0, 1, 1200000, 1200000, 200, "8038_s2", 0,
+ 12),
+ PM8XXX_LDO(L14, "8038_l14", 0, 1, 1800000, 1800000, 200, NULL, 0, 13),
+ PM8XXX_LDO(L15, "8038_l15", 0, 1, 1800000, 2950000, 200, NULL, 0, 14),
+ PM8XXX_NLDO1200(L16, "8038_l16", 0, 1, 1050000, 1050000, 200, "8038_s3",
+ 0, 15),
+ PM8XXX_LDO(L17, "8038_l17", 0, 1, 1800000, 2950000, 200, NULL, 0, 16),
+ PM8XXX_LDO(L18, "8038_l18", 0, 1, 1800000, 1800000, 200, NULL, 0, 17),
+ PM8XXX_NLDO1200(L19, "8038_l19", 0, 1, 1050000, 1050000, 200, "8038_s3",
+ 0, 18),
+ PM8XXX_NLDO1200(L20, "8038_l20", 1, 1, 1200000, 1200000, 200, "8038_s2",
+ 10000, 19),
+ PM8XXX_LDO(L21, "8038_l21", 0, 1, 1900000, 1900000, 200, "8038_s4", 0,
+ 20),
+ PM8XXX_LDO(L22, "8038_l22", 1, 1, 2950000, 2950000, 200, NULL, 10000,
+ 21),
+ PM8XXX_LDO(L23, "8038_l23", 0, 1, 1800000, 1800000, 200, "8038_s4", 0,
+ 22),
+ PM8XXX_NLDO1200(L24, "8038_l24", 1, 1, 1150000, 1150000, 200, "8038_s2",
+ 10000, 23),
+ PM8XXX_LDO(L26, "8038_l26", 1, 1, 1050000, 1050000, 200, "8038_s2",
+ 10000, 24),
+ PM8XXX_NLDO1200(L27, "8038_l27", 0, 1, 1050000, 1050000, 200, "8038_s3",
+ 0, 25),
+
+ /* ID name always_on pd en_t supply reg_ID */
+ PM8XXX_VS(LVS1, "8038_lvs1", 0, 1, 0, "8038_l11", 32),
+ PM8XXX_VS(LVS2, "8038_lvs2", 0, 1, 0, "8038_l11", 33),
+
+};
+
+int msm8930_pm8038_regulator_pdata_len __devinitdata =
+ ARRAY_SIZE(msm8930_pm8038_regulator_pdata);