Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
new file mode 100644
index 0000000..f0306b5
--- /dev/null
+++ b/arch/ia64/sn/kernel/setup.c
@@ -0,0 +1,621 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/serial.h>
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/root_dev.h>
+#include <linux/nodemask.h>
+
+#include <asm/io.h>
+#include <asm/sal.h>
+#include <asm/machvec.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/simulator.h>
+#include <asm/sn/leds.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/shub_mmr.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/geo.h>
+#include "xtalk/xwidgetdev.h"
+#include "xtalk/hubdev.h"
+#include <asm/sn/klconfig.h>
+
+
+DEFINE_PER_CPU(struct pda_s, pda_percpu);
+
+#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */
+
+lboard_t *root_lboard[MAX_COMPACT_NODES];
+
+extern void bte_init_node(nodepda_t *, cnodeid_t);
+
+extern void sn_timer_init(void);
+extern unsigned long last_time_offset;
+extern void (*ia64_mark_idle) (int);
+extern void snidle(int);
+extern unsigned char acpi_kbd_controller_present;
+
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
+DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
+
+partid_t sn_partid = -1;
+EXPORT_SYMBOL(sn_partid);
+char sn_system_serial_number_string[128];
+EXPORT_SYMBOL(sn_system_serial_number_string);
+u64 sn_partition_serial_number;
+EXPORT_SYMBOL(sn_partition_serial_number);
+u8 sn_partition_id;
+EXPORT_SYMBOL(sn_partition_id);
+u8 sn_system_size;
+EXPORT_SYMBOL(sn_system_size);
+u8 sn_sharing_domain_size;
+EXPORT_SYMBOL(sn_sharing_domain_size);
+u8 sn_coherency_id;
+EXPORT_SYMBOL(sn_coherency_id);
+u8 sn_region_size;
+EXPORT_SYMBOL(sn_region_size);
+
+short physical_node_map[MAX_PHYSNODE_ID];
+
+EXPORT_SYMBOL(physical_node_map);
+
+int numionodes;
+
+static void sn_init_pdas(char **);
+static void scan_for_ionodes(void);
+
+static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
+
+/*
+ * The format of "screen_info" is strange, and due to early i386-setup
+ * code. This is just enough to make the console code think we're on a
+ * VGA color display.
+ */
+struct screen_info sn_screen_info = {
+ .orig_x = 0,
+ .orig_y = 0,
+ .orig_video_mode = 3,
+ .orig_video_cols = 80,
+ .orig_video_ega_bx = 3,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = 1,
+ .orig_video_points = 16
+};
+
+/*
+ * This is here so we can use the CMOS detection in ide-probe.c to
+ * determine what drives are present. In theory, we don't need this
+ * as the auto-detection could be done via ide-probe.c:do_probe() but
+ * in practice that would be much slower, which is painful when
+ * running in the simulator. Note that passing zeroes in DRIVE_INFO
+ * is sufficient (the IDE driver will autodetect the drive geometry).
+ */
+#ifdef CONFIG_IA64_GENERIC
+extern char drive_info[4 * 16];
+#else
+char drive_info[4 * 16];
+#endif
+
+/*
+ * Get nasid of current cpu early in boot before nodepda is initialized
+ */
+static int
+boot_get_nasid(void)
+{
+ int nasid;
+
+ if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
+ BUG();
+ return nasid;
+}
+
+/*
+ * This routine can only be used during init, since
+ * smp_boot_data is an init data structure.
+ * We have to use smp_boot_data.cpu_phys_id to find
+ * the physical id of the processor because the normal
+ * cpu_physical_id() relies on data structures that
+ * may not be initialized yet.
+ */
+
+static int __init pxm_to_nasid(int pxm)
+{
+ int i;
+ int nid;
+
+ nid = pxm_to_nid_map[pxm];
+ for (i = 0; i < num_node_memblks; i++) {
+ if (node_memblk[i].nid == nid) {
+ return NASID_GET(node_memblk[i].start_paddr);
+ }
+ }
+ return -1;
+}
+
+/**
+ * early_sn_setup - early setup routine for SN platforms
+ *
+ * Sets up an initial console to aid debugging. Intended primarily
+ * for bringup. See start_kernel() in init/main.c.
+ */
+
+void __init early_sn_setup(void)
+{
+ efi_system_table_t *efi_systab;
+ efi_config_table_t *config_tables;
+ struct ia64_sal_systab *sal_systab;
+ struct ia64_sal_desc_entry_point *ep;
+ char *p;
+ int i, j;
+
+ /*
+ * Parse enough of the SAL tables to locate the SAL entry point. Since, console
+ * IO on SN2 is done via SAL calls, early_printk won't work without this.
+ *
+ * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
+ * Any changes to those file may have to be made hereas well.
+ */
+ efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab);
+ config_tables = __va(efi_systab->tables);
+ for (i = 0; i < efi_systab->nr_tables; i++) {
+ if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) ==
+ 0) {
+ sal_systab = __va(config_tables[i].table);
+ p = (char *)(sal_systab + 1);
+ for (j = 0; j < sal_systab->entry_count; j++) {
+ if (*p == SAL_DESC_ENTRY_POINT) {
+ ep = (struct ia64_sal_desc_entry_point
+ *)p;
+ ia64_sal_handler_init(__va
+ (ep->sal_proc),
+ __va(ep->gp));
+ return;
+ }
+ p += SAL_DESC_SIZE(*p);
+ }
+ }
+ }
+ /* Uh-oh, SAL not available?? */
+ printk(KERN_ERR "failed to find SAL entry point\n");
+}
+
+extern int platform_intr_list[];
+extern nasid_t master_nasid;
+static int shub_1_1_found __initdata;
+
+/*
+ * sn_check_for_wars
+ *
+ * Set flag for enabling shub specific wars
+ */
+
+static inline int __init is_shub_1_1(int nasid)
+{
+ unsigned long id;
+ int rev;
+
+ if (is_shub2())
+ return 0;
+ id = REMOTE_HUB_L(nasid, SH1_SHUB_ID);
+ rev = (id & SH1_SHUB_ID_REVISION_MASK) >> SH1_SHUB_ID_REVISION_SHFT;
+ return rev <= 2;
+}
+
+static void __init sn_check_for_wars(void)
+{
+ int cnode;
+
+ if (is_shub2()) {
+ /* none yet */
+ } else {
+ for_each_online_node(cnode) {
+ if (is_shub_1_1(cnodeid_to_nasid(cnode)))
+ sn_hub_info->shub_1_1_found = 1;
+ }
+ }
+}
+
+/**
+ * sn_setup - SN platform setup routine
+ * @cmdline_p: kernel command line
+ *
+ * Handles platform setup for SN machines. This includes determining
+ * the RTC frequency (via a SAL call), initializing secondary CPUs, and
+ * setting up per-node data areas. The console is also initialized here.
+ */
+void __init sn_setup(char **cmdline_p)
+{
+ long status, ticks_per_sec, drift;
+ int pxm;
+ int major = sn_sal_rev_major(), minor = sn_sal_rev_minor();
+ extern void sn_cpu_init(void);
+
+ /*
+ * If the generic code has enabled vga console support - lets
+ * get rid of it again. This is a kludge for the fact that ACPI
+ * currtently has no way of informing us if legacy VGA is available
+ * or not.
+ */
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+ if (conswitchp == &vga_con) {
+ printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#else
+ conswitchp = NULL;
+#endif /* CONFIG_DUMMY_CONSOLE */
+ }
+#endif /* def(CONFIG_VT) && def(CONFIG_VGA_CONSOLE) */
+
+ MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
+
+ memset(physical_node_map, -1, sizeof(physical_node_map));
+ for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
+ if (pxm_to_nid_map[pxm] != -1)
+ physical_node_map[pxm_to_nasid(pxm)] =
+ pxm_to_nid_map[pxm];
+
+ /*
+ * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
+ * support here so we don't have to listen to failed keyboard probe
+ * messages.
+ */
+ if ((major < 2 || (major == 2 && minor <= 9)) &&
+ acpi_kbd_controller_present) {
+ printk(KERN_INFO "Disabling legacy keyboard support as prom "
+ "is too old and doesn't provide FADT\n");
+ acpi_kbd_controller_present = 0;
+ }
+
+ printk("SGI SAL version %x.%02x\n", major, minor);
+
+ /*
+ * Confirm the SAL we're running on is recent enough...
+ */
+ if ((major < SN_SAL_MIN_MAJOR) || (major == SN_SAL_MIN_MAJOR &&
+ minor < SN_SAL_MIN_MINOR)) {
+ printk(KERN_ERR "This kernel needs SGI SAL version >= "
+ "%x.%02x\n", SN_SAL_MIN_MAJOR, SN_SAL_MIN_MINOR);
+ panic("PROM version too old\n");
+ }
+
+ master_nasid = boot_get_nasid();
+
+ status =
+ ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+ &drift);
+ if (status != 0 || ticks_per_sec < 100000) {
+ printk(KERN_WARNING
+ "unable to determine platform RTC clock frequency, guessing.\n");
+ /* PROM gives wrong value for clock freq. so guess */
+ sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+ } else
+ sn_rtc_cycles_per_second = ticks_per_sec;
+
+ platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
+
+ /*
+ * we set the default root device to /dev/hda
+ * to make simulation easy
+ */
+ ROOT_DEV = Root_HDA1;
+
+ /*
+ * Create the PDAs and NODEPDAs for all the cpus.
+ */
+ sn_init_pdas(cmdline_p);
+
+ ia64_mark_idle = &snidle;
+
+ /*
+ * For the bootcpu, we do this here. All other cpus will make the
+ * call as part of cpu_init in slave cpu initialization.
+ */
+ sn_cpu_init();
+
+#ifdef CONFIG_SMP
+ init_smp_config();
+#endif
+ screen_info = sn_screen_info;
+
+ sn_timer_init();
+}
+
+/**
+ * sn_init_pdas - setup node data areas
+ *
+ * One time setup for Node Data Area. Called by sn_setup().
+ */
+static void __init sn_init_pdas(char **cmdline_p)
+{
+ cnodeid_t cnode;
+
+ memset(pda->cnodeid_to_nasid_table, -1,
+ sizeof(pda->cnodeid_to_nasid_table));
+ for_each_online_node(cnode)
+ pda->cnodeid_to_nasid_table[cnode] =
+ pxm_to_nasid(nid_to_pxm_map[cnode]);
+
+ numionodes = num_online_nodes();
+ scan_for_ionodes();
+
+ /*
+ * Allocate & initalize the nodepda for each node.
+ */
+ for_each_online_node(cnode) {
+ nodepdaindr[cnode] =
+ alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
+ memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
+ memset(nodepdaindr[cnode]->phys_cpuid, -1,
+ sizeof(nodepdaindr[cnode]->phys_cpuid));
+ }
+
+ /*
+ * Allocate & initialize nodepda for TIOs. For now, put them on node 0.
+ */
+ for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+ nodepdaindr[cnode] =
+ alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
+ memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
+ }
+
+ /*
+ * Now copy the array of nodepda pointers to each nodepda.
+ */
+ for (cnode = 0; cnode < numionodes; cnode++)
+ memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
+ sizeof(nodepdaindr));
+
+ /*
+ * Set up IO related platform-dependent nodepda fields.
+ * The following routine actually sets up the hubinfo struct
+ * in nodepda.
+ */
+ for_each_online_node(cnode) {
+ bte_init_node(nodepdaindr[cnode], cnode);
+ }
+
+ /*
+ * Initialize the per node hubdev. This includes IO Nodes and
+ * headless/memless nodes.
+ */
+ for (cnode = 0; cnode < numionodes; cnode++) {
+ hubdev_init_node(nodepdaindr[cnode], cnode);
+ }
+}
+
+/**
+ * sn_cpu_init - initialize per-cpu data areas
+ * @cpuid: cpuid of the caller
+ *
+ * Called during cpu initialization on each cpu as it starts.
+ * Currently, initializes the per-cpu data area for SNIA.
+ * Also sets up a few fields in the nodepda. Also known as
+ * platform_cpu_init() by the ia64 machvec code.
+ */
+void __init sn_cpu_init(void)
+{
+ int cpuid;
+ int cpuphyid;
+ int nasid;
+ int subnode;
+ int slice;
+ int cnode;
+ int i;
+ static int wars_have_been_checked;
+
+ memset(pda, 0, sizeof(pda));
+ if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
+ &sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
+ &sn_coherency_id, &sn_region_size))
+ BUG();
+ sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
+
+ /*
+ * The boot cpu makes this call again after platform initialization is
+ * complete.
+ */
+ if (nodepdaindr[0] == NULL)
+ return;
+
+ cpuid = smp_processor_id();
+ cpuphyid = get_sapicid();
+
+ if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
+ BUG();
+
+ for (i=0; i < MAX_NUMNODES; i++) {
+ if (nodepdaindr[i]) {
+ nodepdaindr[i]->phys_cpuid[cpuid].nasid = nasid;
+ nodepdaindr[i]->phys_cpuid[cpuid].slice = slice;
+ nodepdaindr[i]->phys_cpuid[cpuid].subnode = subnode;
+ }
+ }
+
+ cnode = nasid_to_cnodeid(nasid);
+
+ pda->p_nodepda = nodepdaindr[cnode];
+ pda->led_address =
+ (typeof(pda->led_address)) (LED0 + (slice << LED_CPU_SHIFT));
+ pda->led_state = LED_ALWAYS_SET;
+ pda->hb_count = HZ / 2;
+ pda->hb_state = 0;
+ pda->idle_flag = 0;
+
+ if (cpuid != 0) {
+ memcpy(pda->cnodeid_to_nasid_table,
+ pdacpu(0)->cnodeid_to_nasid_table,
+ sizeof(pda->cnodeid_to_nasid_table));
+ }
+
+ /*
+ * Check for WARs.
+ * Only needs to be done once, on BSP.
+ * Has to be done after loop above, because it uses pda.cnodeid_to_nasid_table[i].
+ * Has to be done before assignment below.
+ */
+ if (!wars_have_been_checked) {
+ sn_check_for_wars();
+ wars_have_been_checked = 1;
+ }
+ sn_hub_info->shub_1_1_found = shub_1_1_found;
+
+ /*
+ * Set up addresses of PIO/MEM write status registers.
+ */
+ {
+ u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
+ u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
+ SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
+ u64 *pio;
+ pio = is_shub1() ? pio1 : pio2;
+ pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);
+ pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
+ }
+
+ /*
+ * WAR addresses for SHUB 1.x.
+ */
+ if (local_node_data->active_cpu_count++ == 0 && is_shub1()) {
+ int buddy_nasid;
+ buddy_nasid =
+ cnodeid_to_nasid(numa_node_id() ==
+ num_online_nodes() - 1 ? 0 : numa_node_id() + 1);
+ pda->pio_shub_war_cam_addr =
+ (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid,
+ SH1_PI_CAM_CONTROL);
+ }
+}
+
+/*
+ * Scan klconfig for ionodes. Add the nasids to the
+ * physical_node_map and the pda and increment numionodes.
+ */
+
+static void __init scan_for_ionodes(void)
+{
+ int nasid = 0;
+ lboard_t *brd;
+
+ /* Setup ionodes with memory */
+ for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
+ char *klgraph_header;
+ cnodeid_t cnodeid;
+
+ if (physical_node_map[nasid] == -1)
+ continue;
+
+ cnodeid = -1;
+ klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
+ if (!klgraph_header) {
+ if (IS_RUNNING_ON_SIMULATOR())
+ continue;
+ BUG(); /* All nodes must have klconfig tables! */
+ }
+ cnodeid = nasid_to_cnodeid(nasid);
+ root_lboard[cnodeid] = (lboard_t *)
+ NODE_OFFSET_TO_LBOARD((nasid),
+ ((kl_config_hdr_t
+ *) (klgraph_header))->
+ ch_board_info);
+ }
+
+ /* Scan headless/memless IO Nodes. */
+ for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
+ /* if there's no nasid, don't try to read the klconfig on the node */
+ if (physical_node_map[nasid] == -1)
+ continue;
+ brd = find_lboard_any((lboard_t *)
+ root_lboard[nasid_to_cnodeid(nasid)],
+ KLTYPE_SNIA);
+ if (brd) {
+ brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
+ if (!brd)
+ continue;
+ }
+
+ brd = find_lboard_any(brd, KLTYPE_SNIA);
+
+ while (brd) {
+ pda->cnodeid_to_nasid_table[numionodes] =
+ brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = numionodes;
+ root_lboard[numionodes] = brd;
+ numionodes++;
+ brd = KLCF_NEXT_ANY(brd);
+ if (!brd)
+ break;
+
+ brd = find_lboard_any(brd, KLTYPE_SNIA);
+ }
+ }
+
+ /* Scan for TIO nodes. */
+ for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
+ /* if there's no nasid, don't try to read the klconfig on the node */
+ if (physical_node_map[nasid] == -1)
+ continue;
+ brd = find_lboard_any((lboard_t *)
+ root_lboard[nasid_to_cnodeid(nasid)],
+ KLTYPE_TIO);
+ while (brd) {
+ pda->cnodeid_to_nasid_table[numionodes] =
+ brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = numionodes;
+ root_lboard[numionodes] = brd;
+ numionodes++;
+ brd = KLCF_NEXT_ANY(brd);
+ if (!brd)
+ break;
+
+ brd = find_lboard_any(brd, KLTYPE_TIO);
+ }
+ }
+
+}
+
+int
+nasid_slice_to_cpuid(int nasid, int slice)
+{
+ long cpu;
+
+ for (cpu=0; cpu < NR_CPUS; cpu++)
+ if (nodepda->phys_cpuid[cpu].nasid == nasid && nodepda->phys_cpuid[cpu].slice == slice)
+ return cpu;
+
+ return -1;
+}