Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/arch/ppc/platforms/k2.c b/arch/ppc/platforms/k2.c
new file mode 100644
index 0000000..aacb438
--- /dev/null
+++ b/arch/ppc/platforms/k2.c
@@ -0,0 +1,613 @@
+/*
+ * arch/ppc/platforms/k2.c
+ *
+ * Board setup routines for SBS K2
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * Updated by: Randy Vinson <rvinson@mvista.com.
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+
+#include <syslib/cpc710.h>
+#include "k2.h"
+
+extern unsigned long loops_per_jiffy;
+extern void gen550_progress(char *, unsigned short);
+
+static unsigned int cpu_7xx[16] = {
+	0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
+};
+static unsigned int cpu_6xx[16] = {
+	0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0
+};
+
+static inline int __init
+k2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+	/*
+	 * Check our hose index.  If we are zero then we are on the
+	 * local PCI hose, otherwise we are on the cPCI hose.
+	 */
+	if (!hose->index) {
+		static char pci_irq_table[][4] =
+			/*
+			 * 	PCI IDSEL/INTPIN->INTLINE
+			 * 	A	B	C	D
+			 */
+		{
+			{1, 	0,	0,	0},	/* Ethernet */
+			{5,	5,	5,	5},	/* PMC Site 1 */
+			{6,	6,	6,	6},	/* PMC Site 2 */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* PCI-ISA Bridge */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{0,     0,      0,      0},     /* unused */
+			{15,	0,	0,	0},	/* M5229 IDE */
+		};
+		const long min_idsel = 3, max_idsel = 17, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else {
+		static char pci_irq_table[][4] =
+		/*
+		 * 	PCI IDSEL/INTPIN->INTLINE
+		 * 	A	B	C	D
+		 */
+		{
+			{10, 	11,	12,	9},	/* cPCI slot 8 */
+			{11, 	12,	9,	10},	/* cPCI slot 7 */
+			{12, 	9,	10,	11},	/* cPCI slot 6 */
+			{9, 	10,	11,	12},	/* cPCI slot 5 */
+			{10, 	11,	12,	9},	/* cPCI slot 4 */
+			{11, 	12,	9,	10},	/* cPCI slot 3 */
+			{12, 	9,	10,	11},	/* cPCI slot 2 */
+		};
+		const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+}
+
+void k2_pcibios_fixup(void)
+{
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+	struct pci_dev *ide_dev;
+
+	/*
+	 * Enable DMA support on hdc
+	 */
+	ide_dev = pci_get_device(PCI_VENDOR_ID_AL,
+				  PCI_DEVICE_ID_AL_M5229, NULL);
+
+	if (ide_dev) {
+
+		unsigned long ide_dma_base;
+
+		ide_dma_base = pci_resource_start(ide_dev, 4);
+		outb(0x00, ide_dma_base + 0x2);
+		outb(0x20, ide_dma_base + 0xa);
+		pci_dev_put(ide_dev);
+	}
+#endif
+}
+
+void k2_pcibios_fixup_resources(struct pci_dev *dev)
+{
+	int i;
+
+	if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
+	    (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) {
+		pr_debug("Fixup CPC710 resources\n");
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end = 0;
+		}
+	}
+}
+
+void k2_setup_hoses(void)
+{
+	struct pci_controller *hose_a, *hose_b;
+
+	/*
+	 * Reconfigure CPC710 memory map so
+	 * we have some more PCI memory space.
+	 */
+
+	/* Set FPHB mode */
+	__raw_writel(0x808000e0, PGCHP);	/* Set FPHB mode */
+
+	/* PCI32 mappings */
+	__raw_writel(0x00000000, K2_PCI32_BAR + PIBAR);	/* PCI I/O base */
+	__raw_writel(0x00000000, K2_PCI32_BAR + PMBAR);	/* PCI Mem base */
+	__raw_writel(0xf0000000, K2_PCI32_BAR + MSIZE);	/* 256MB */
+	__raw_writel(0xfff00000, K2_PCI32_BAR + IOSIZE); /* 1MB */
+	__raw_writel(0xc0000000, K2_PCI32_BAR + SMBAR);	/* Base@0xc0000000 */
+	__raw_writel(0x80000000, K2_PCI32_BAR + SIBAR);	/* Base@0x80000000 */
+	__raw_writel(0x000000c0, K2_PCI32_BAR + PSSIZE); /* 1GB space */
+	__raw_writel(0x000000c0, K2_PCI32_BAR + PPSIZE); /* 1GB space */
+	__raw_writel(0x00000000, K2_PCI32_BAR + BARPS);	/* Base@0x00000000 */
+	__raw_writel(0x00000000, K2_PCI32_BAR + BARPP);	/* Base@0x00000000 */
+	__raw_writel(0x00000080, K2_PCI32_BAR + PSBAR);	/* Base@0x80 */
+	__raw_writel(0x00000000, K2_PCI32_BAR + PPBAR);
+
+	__raw_writel(0xc0000000, K2_PCI32_BAR + BPMDLK);
+	__raw_writel(0xd0000000, K2_PCI32_BAR + TPMDLK);
+	__raw_writel(0x80000000, K2_PCI32_BAR + BIODLK);
+	__raw_writel(0x80100000, K2_PCI32_BAR + TIODLK);
+	__raw_writel(0xe0008000, K2_PCI32_BAR + DLKCTRL);
+	__raw_writel(0xffffffff, K2_PCI32_BAR + DLKDEV);
+
+	/* PCI64 mappings */
+	__raw_writel(0x00100000, K2_PCI64_BAR + PIBAR);	/* PCI I/O base */
+	__raw_writel(0x10000000, K2_PCI64_BAR + PMBAR);	/* PCI Mem base */
+	__raw_writel(0xf0000000, K2_PCI64_BAR + MSIZE);	/* 256MB */
+	__raw_writel(0xfff00000, K2_PCI64_BAR + IOSIZE); /* 1MB */
+	__raw_writel(0xd0000000, K2_PCI64_BAR + SMBAR);	/* Base@0xd0000000 */
+	__raw_writel(0x80100000, K2_PCI64_BAR + SIBAR);	/* Base@0x80100000 */
+	__raw_writel(0x000000c0, K2_PCI64_BAR + PSSIZE); /* 1GB space */
+	__raw_writel(0x000000c0, K2_PCI64_BAR + PPSIZE); /* 1GB space */
+	__raw_writel(0x00000000, K2_PCI64_BAR + BARPS);	/* Base@0x00000000 */
+	__raw_writel(0x00000000, K2_PCI64_BAR + BARPP);	/* Base@0x00000000 */
+
+	/* Setup PCI32 hose */
+	hose_a = pcibios_alloc_controller();
+	if (!hose_a)
+		return;
+
+	hose_a->first_busno = 0;
+	hose_a->last_busno = 0xff;
+	hose_a->pci_mem_offset = K2_PCI32_MEM_BASE;
+
+	pci_init_resource(&hose_a->io_resource,
+			  K2_PCI32_LOWER_IO,
+			  K2_PCI32_UPPER_IO,
+			  IORESOURCE_IO, "PCI32 host bridge");
+
+	pci_init_resource(&hose_a->mem_resources[0],
+			  K2_PCI32_LOWER_MEM + K2_PCI32_MEM_BASE,
+			  K2_PCI32_UPPER_MEM + K2_PCI32_MEM_BASE,
+			  IORESOURCE_MEM, "PCI32 host bridge");
+
+	hose_a->io_space.start = K2_PCI32_LOWER_IO;
+	hose_a->io_space.end = K2_PCI32_UPPER_IO;
+	hose_a->mem_space.start = K2_PCI32_LOWER_MEM;
+	hose_a->mem_space.end = K2_PCI32_UPPER_MEM;
+	hose_a->io_base_virt = (void *)K2_ISA_IO_BASE;
+
+	setup_indirect_pci(hose_a, K2_PCI32_CONFIG_ADDR, K2_PCI32_CONFIG_DATA);
+
+	/* Initialize PCI32 bus registers */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(0, 0),
+				CPC710_BUS_NUMBER, hose_a->first_busno);
+
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(0, 0),
+				CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
+
+	/* Enable PCI interrupt polling */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x45, 0x80);
+
+	/* Route polled PCI interrupts */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x48, 0x58);
+
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x49, 0x07);
+
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x4a, 0x31);
+
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x4b, 0xb9);
+
+	/* route secondary IDE channel interrupt to IRQ 15 */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x75, 0x0f);
+
+	/* enable IDE controller IDSEL */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(8, 0), 0x58, 0x48);
+
+	/* Enable IDE function */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(17, 0), 0x50, 0x03);
+
+	/* Set M5229 IDE controller to native mode */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(17, 0), PCI_CLASS_PROG, 0xdf);
+
+	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+
+	/* Write out correct max subordinate bus number for hose A */
+	early_write_config_byte(hose_a,
+				hose_a->first_busno,
+				PCI_DEVFN(0, 0),
+				CPC710_SUB_BUS_NUMBER, hose_a->last_busno);
+
+	/* Only setup PCI64 hose if we are in the system slot */
+	if (!(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK)) {
+		/* Setup PCI64 hose */
+		hose_b = pcibios_alloc_controller();
+		if (!hose_b)
+			return;
+
+		hose_b->first_busno = hose_a->last_busno + 1;
+		hose_b->last_busno = 0xff;
+
+		/* Reminder: quit changing the following, it is correct. */
+		hose_b->pci_mem_offset = K2_PCI32_MEM_BASE;
+
+		pci_init_resource(&hose_b->io_resource,
+				  K2_PCI64_LOWER_IO,
+				  K2_PCI64_UPPER_IO,
+				  IORESOURCE_IO, "PCI64 host bridge");
+
+		pci_init_resource(&hose_b->mem_resources[0],
+				  K2_PCI64_LOWER_MEM + K2_PCI32_MEM_BASE,
+				  K2_PCI64_UPPER_MEM + K2_PCI32_MEM_BASE,
+				  IORESOURCE_MEM, "PCI64 host bridge");
+
+		hose_b->io_space.start = K2_PCI64_LOWER_IO;
+		hose_b->io_space.end = K2_PCI64_UPPER_IO;
+		hose_b->mem_space.start = K2_PCI64_LOWER_MEM;
+		hose_b->mem_space.end = K2_PCI64_UPPER_MEM;
+		hose_b->io_base_virt = (void *)K2_ISA_IO_BASE;
+
+		setup_indirect_pci(hose_b,
+				   K2_PCI64_CONFIG_ADDR, K2_PCI64_CONFIG_DATA);
+
+		/* Initialize PCI64 bus registers */
+		early_write_config_byte(hose_b,
+					0,
+					PCI_DEVFN(0, 0),
+					CPC710_SUB_BUS_NUMBER, 0xff);
+
+		early_write_config_byte(hose_b,
+					0,
+					PCI_DEVFN(0, 0),
+					CPC710_BUS_NUMBER, hose_b->first_busno);
+
+		hose_b->last_busno = pciauto_bus_scan(hose_b,
+						      hose_b->first_busno);
+
+		/* Write out correct max subordinate bus number for hose B */
+		early_write_config_byte(hose_b,
+					hose_b->first_busno,
+					PCI_DEVFN(0, 0),
+					CPC710_SUB_BUS_NUMBER,
+					hose_b->last_busno);
+
+		/* Configure PCI64 PSBAR */
+		early_write_config_dword(hose_b,
+					 hose_b->first_busno,
+					 PCI_DEVFN(0, 0),
+					 PCI_BASE_ADDRESS_0,
+					 K2_PCI64_SYS_MEM_BASE);
+	}
+
+	/* Configure i8259 level/edge settings */
+	outb(0x62, 0x4d0);
+	outb(0xde, 0x4d1);
+
+#ifdef CONFIG_CPC710_DATA_GATHERING
+	{
+		unsigned int tmp;
+		tmp = __raw_readl(ABCNTL);
+		/* Enable data gathering on both PCI interfaces */
+		__raw_writel(tmp | 0x05000000, ABCNTL);
+	}
+#endif
+
+	ppc_md.pcibios_fixup = k2_pcibios_fixup;
+	ppc_md.pcibios_fixup_resources = k2_pcibios_fixup_resources;
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = k2_map_irq;
+}
+
+static int k2_get_bus_speed(void)
+{
+	int bus_speed;
+	unsigned char board_id;
+
+	board_id = *(unsigned char *)K2_BOARD_ID_REG;
+
+	switch (K2_BUS_SPD(board_id)) {
+
+	case 0:
+	default:
+		bus_speed = 100000000;
+		break;
+
+	case 1:
+		bus_speed = 83333333;
+		break;
+
+	case 2:
+		bus_speed = 75000000;
+		break;
+
+	case 3:
+		bus_speed = 66666666;
+		break;
+	}
+	return bus_speed;
+}
+
+static int k2_get_cpu_speed(void)
+{
+	unsigned long hid1;
+	int cpu_speed;
+
+	hid1 = mfspr(SPRN_HID1) >> 28;
+
+	if ((mfspr(SPRN_PVR) >> 16) == 8)
+		hid1 = cpu_7xx[hid1];
+	else
+		hid1 = cpu_6xx[hid1];
+
+	cpu_speed = k2_get_bus_speed() * hid1 / 2;
+	return cpu_speed;
+}
+
+static void __init k2_calibrate_decr(void)
+{
+	int freq, divisor = 4;
+
+	/* determine processor bus speed */
+	freq = k2_get_bus_speed();
+	tb_ticks_per_jiffy = freq / HZ / divisor;
+	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
+}
+
+static int k2_show_cpuinfo(struct seq_file *m)
+{
+	unsigned char k2_geo_bits, k2_system_slot;
+
+	seq_printf(m, "vendor\t\t: SBS\n");
+	seq_printf(m, "machine\t\t: K2\n");
+	seq_printf(m, "cpu speed\t: %dMhz\n", k2_get_cpu_speed() / 1000000);
+	seq_printf(m, "bus speed\t: %dMhz\n", k2_get_bus_speed() / 1000000);
+	seq_printf(m, "memory type\t: SDRAM\n");
+
+	k2_geo_bits = readb(K2_MSIZ_GEO_REG) & K2_GEO_ADR_MASK;
+	k2_system_slot = !(readb(K2_MISC_REG) & K2_SYS_SLOT_MASK);
+	seq_printf(m, "backplane\t: %s slot board",
+		   k2_system_slot ? "System" : "Non system");
+	seq_printf(m, "with geographical address %x\n", k2_geo_bits);
+
+	return 0;
+}
+
+TODC_ALLOC();
+
+static void __init k2_setup_arch(void)
+{
+	unsigned int cpu;
+
+	/* Setup TODC access */
+	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
+		  ioremap(K2_RTC_BASE_ADDRESS, K2_RTC_SIZE), 8);
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000 / HZ;
+
+	/* make FLASH transactions higher priority than PCI to avoid deadlock */
+	__raw_writel(__raw_readl(SIOC1) | 0x80000000, SIOC1);
+
+	/* Set hardware to access FLASH page 2 */
+	__raw_writel(1 << 29, GPOUT);
+
+	/* Setup PCI host bridges */
+	k2_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDC1;
+#endif
+
+	/* Identify the system */
+	printk(KERN_INFO "System Identification: SBS K2 - PowerPC 750 @ "
+			"%d Mhz\n", k2_get_cpu_speed() / 1000000);
+	printk(KERN_INFO "Port by MontaVista Software, Inc. "
+			"(source@mvista.com)\n");
+
+	/* Identify the CPU manufacturer */
+	cpu = PVR_REV(mfspr(SPRN_PVR));
+	printk(KERN_INFO "CPU manufacturer: %s [rev=%04x]\n",
+			(cpu & (1 << 15)) ? "IBM" : "Motorola", cpu);
+}
+
+static void k2_restart(char *cmd)
+{
+	local_irq_disable();
+
+	/* Flip FLASH back to page 1 to access firmware image */
+	__raw_writel(0, GPOUT);
+
+	/* SRR0 has system reset vector, SRR1 has default MSR value */
+	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
+	mtspr(SPRN_SRR0, 0xfff00100);
+	mtspr(SPRN_SRR1, 0);
+	__asm__ __volatile__("rfi\n\t");
+
+	/* not reached */
+	for (;;) ;
+}
+
+static void k2_power_off(void)
+{
+	for (;;) ;
+}
+
+static void k2_halt(void)
+{
+	k2_restart(NULL);
+}
+
+/*
+ * Set BAT 3 to map PCI32 I/O space.
+ */
+static __inline__ void k2_set_bat(void)
+{
+	/* wait for all outstanding memory accesses to complete */
+	mb();
+
+	/* setup DBATs */
+	mtspr(SPRN_DBAT2U, 0x80001ffe);
+	mtspr(SPRN_DBAT2L, 0x8000002a);
+	mtspr(SPRN_DBAT3U, 0xf0001ffe);
+	mtspr(SPRN_DBAT3L, 0xf000002a);
+
+	/* wait for updates */
+	mb();
+}
+
+static unsigned long __init k2_find_end_of_memory(void)
+{
+	unsigned long total;
+	unsigned char msize = 7;	/* Default to 128MB */
+
+	msize = K2_MEM_SIZE(readb(K2_MSIZ_GEO_REG));
+
+	switch (msize) {
+	case 2:
+		/*
+		 * This will break without a lowered
+		 * KERNELBASE or CONFIG_HIGHMEM on.
+		 * It seems non 1GB builds exist yet,
+		 * though.
+		 */
+		total = K2_MEM_SIZE_1GB;
+		break;
+	case 3:
+	case 4:
+		total = K2_MEM_SIZE_512MB;
+		break;
+	case 5:
+	case 6:
+		total = K2_MEM_SIZE_256MB;
+		break;
+	case 7:
+		total = K2_MEM_SIZE_128MB;
+		break;
+	default:
+		printk
+		    ("K2: Invalid memory size detected, defaulting to 128MB\n");
+		total = K2_MEM_SIZE_128MB;
+		break;
+	}
+	return total;
+}
+
+static void __init k2_map_io(void)
+{
+	io_block_mapping(K2_PCI32_IO_BASE,
+			 K2_PCI32_IO_BASE, 0x00200000, _PAGE_IO);
+	io_block_mapping(0xff000000, 0xff000000, 0x01000000, _PAGE_IO);
+}
+
+static void __init k2_init_irq(void)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		irq_desc[i].handler = &i8259_pic;
+
+	i8259_init(0);
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+			  unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo((struct bi_record *)(r3 + KERNELBASE));
+
+	k2_set_bat();
+
+	isa_io_base = K2_ISA_IO_BASE;
+	isa_mem_base = K2_ISA_MEM_BASE;
+	pci_dram_offset = K2_PCI32_SYS_MEM_BASE;
+
+	ppc_md.setup_arch = k2_setup_arch;
+	ppc_md.show_cpuinfo = k2_show_cpuinfo;
+	ppc_md.init_IRQ = k2_init_irq;
+	ppc_md.get_irq = i8259_irq;
+
+	ppc_md.find_end_of_memory = k2_find_end_of_memory;
+	ppc_md.setup_io_mappings = k2_map_io;
+
+	ppc_md.restart = k2_restart;
+	ppc_md.power_off = k2_power_off;
+	ppc_md.halt = k2_halt;
+
+	ppc_md.time_init = todc_time_init;
+	ppc_md.set_rtc_time = todc_set_rtc_time;
+	ppc_md.get_rtc_time = todc_get_rtc_time;
+	ppc_md.calibrate_decr = k2_calibrate_decr;
+
+	ppc_md.nvram_read_val = todc_direct_read_val;
+	ppc_md.nvram_write_val = todc_direct_write_val;
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+	ppc_md.progress = gen550_progress;
+#endif
+}