Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
new file mode 100644
index 0000000..df7a9b9
--- /dev/null
+++ b/arch/sh/kernel/time.c
@@ -0,0 +1,657 @@
+/*
+ * arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * Some code taken from i386 version.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/freq.h>
+#include <asm/cpu/timer.h>
+#ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
+#endif
+
+#include <linux/timex.h>
+#include <linux/irq.h>
+
+#define TMU_TOCR_INIT 0x00
+#define TMU0_TCR_INIT 0x0020
+#define TMU_TSTR_INIT 1
+
+#define TMU0_TCR_CALIB 0x0000
+
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+#define CLOCKGEN_MEMCLKCR 0xbb040038
+#define MEMCLKCR_RATIO_MASK 0x7
+#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
+
+extern unsigned long wall_jiffies;
+#define TICK_SIZE (tick_nsec / 1000)
+DEFINE_SPINLOCK(tmu0_lock);
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
+ * these routines anywhere... */
+#ifdef CONFIG_SH_RTC
+void (*rtc_get_time)(struct timespec *) = sh_rtc_gettimeofday;
+int (*rtc_set_time)(const time_t) = sh_rtc_settimeofday;
+#else
+void (*rtc_get_time)(struct timespec *);
+int (*rtc_set_time)(const time_t);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
+#endif
+#if defined(CONFIG_CPU_SH3)
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int stc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
+#define bfc_divisors stc_multipliers
+#define bfc_values stc_values
+static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int ifc_values[] = { 0, 1, 4, 2, 0, 0, 0, 0 };
+static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int pfc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
+#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SUBTYPE_SH73180)
+static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
+static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+#define bfc_divisors ifc_divisors /* Same */
+#define bfc_values ifc_values
+#define pfc_divisors ifc_divisors /* Same */
+#define pfc_values ifc_values
+#else
+static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
+static int ifc_values[] = { 0, 1, 2, 3, 0, 4, 0, 5 };
+#define bfc_divisors ifc_divisors /* Same */
+#define bfc_values ifc_values
+static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
+static int pfc_values[] = { 0, 0, 1, 2, 0, 3, 0, 4 };
+#endif
+#else
+#error "Unknown ifc/bfc/pfc/stc values for this processor"
+#endif
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies * (1000000000 / HZ);
+}
+
+static unsigned long do_gettimeoffset(void)
+{
+ int count;
+ unsigned long flags;
+
+ static int count_p = 0x7fffffff; /* for the first call after boot */
+ static unsigned long jiffies_p = 0;
+
+ /*
+ * cache volatile jiffies temporarily; we have IRQs turned off.
+ */
+ unsigned long jiffies_t;
+
+ spin_lock_irqsave(&tmu0_lock, flags);
+ /* timer count may underflow right here */
+ count = ctrl_inl(TMU0_TCNT); /* read the latched count */
+
+ jiffies_t = jiffies;
+
+ /*
+ * avoiding timer inconsistencies (they are rare, but they happen)...
+ * there is one kind of problem that must be avoided here:
+ * 1. the timer counter underflows
+ */
+
+ if( jiffies_t == jiffies_p ) {
+ if( count > count_p ) {
+ /* the nutcase */
+
+ if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+ }
+ }
+ } else
+ jiffies_p = jiffies_t;
+
+ count_p = count;
+ spin_unlock_irqrestore(&tmu0_lock, flags);
+
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ count = (count + LATCH/2) / LATCH;
+
+ return count;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long seq;
+ unsigned long usec, sec;
+ unsigned long lost;
+
+ do {
+ seq = read_seqbegin(&xtime_lock);
+ usec = do_gettimeoffset();
+
+ lost = jiffies - wall_jiffies;
+ if (lost)
+ usec += lost * (1000000 / HZ);
+
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / 1000;
+ } while (read_seqretry(&xtime_lock, seq));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= 1000 * (do_gettimeoffset() +
+ (jiffies - wall_jiffies) * (1000000 / HZ));
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+/* last time the RTC clock got updated */
+static long last_rtc_update;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ profile_tick(CPU_PROFILING, regs);
+
+#ifdef CONFIG_HEARTBEAT
+ if (sh_mv.mv_heartbeat != NULL)
+ sh_mv.mv_heartbeat();
+#endif
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ if (rtc_set_time(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ }
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long timer_status;
+
+ /* Clear UNF bit */
+ timer_status = ctrl_inw(TMU0_TCR);
+ timer_status &= ~0x100;
+ ctrl_outw(timer_status, TMU0_TCR);
+
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_seqlock(&xtime_lock);
+ do_timer_interrupt(irq, NULL, regs);
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Hah! We'll see if this works (switching from usecs to nsecs).
+ */
+static unsigned int __init get_timer_frequency(void)
+{
+ u32 freq;
+ struct timespec ts1, ts2;
+ unsigned long diff_nsec;
+ unsigned long factor;
+
+ /* Setup the timer: We don't want to generate interrupts, just
+ * have it count down at its natural rate.
+ */
+ ctrl_outb(0, TMU_TSTR);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+#endif
+ ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR);
+ ctrl_outl(0xffffffff, TMU0_TCOR);
+ ctrl_outl(0xffffffff, TMU0_TCNT);
+
+ rtc_get_time(&ts2);
+
+ do {
+ rtc_get_time(&ts1);
+ } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
+
+ /* actually start the timer */
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+
+ do {
+ rtc_get_time(&ts2);
+ } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
+
+ freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
+ if (ts2.tv_nsec < ts1.tv_nsec) {
+ ts2.tv_nsec += 1000000000;
+ ts2.tv_sec--;
+ }
+
+ diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
+
+ /* this should work well if the RTC has a precision of n Hz, where
+ * n is an integer. I don't think we have to worry about the other
+ * cases. */
+ factor = (1000000000 + diff_nsec/2) / diff_nsec;
+
+ if (factor * diff_nsec > 1100000000 ||
+ factor * diff_nsec < 900000000)
+ panic("weird RTC (diff_nsec %ld)", diff_nsec);
+
+ return freq * factor;
+}
+
+void (*board_time_init)(void);
+void (*board_timer_setup)(struct irqaction *irq);
+
+static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ;
+
+static int __init sh_pclk_setup(char *str)
+{
+ unsigned int freq;
+
+ if (get_option(&str, &freq))
+ sh_pclk_freq = freq;
+
+ return 1;
+}
+__setup("sh_pclk=", sh_pclk_setup);
+
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+
+void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc)
+{
+ unsigned int frqcr = ctrl_inw(FRQCR);
+
+#if defined(CONFIG_CPU_SH3)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+ *ifc = md_table[((frqcr & 0x0070) >> 4)];
+ *bfc = md_table[((frqcr & 0x0700) >> 8)];
+ *pfc = md_table[frqcr & 0x0007];
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+ *bfc = stc_multipliers[(frqcr & 0x0300) >> 8];
+ *ifc = ifc_divisors[(frqcr & 0x0030) >> 4];
+ *pfc = pfc_divisors[frqcr & 0x0003];
+#else
+ unsigned int tmp;
+
+ tmp = (frqcr & 0x8000) >> 13;
+ tmp |= (frqcr & 0x0030) >> 4;
+ *bfc = stc_multipliers[tmp];
+ tmp = (frqcr & 0x4000) >> 12;
+ tmp |= (frqcr & 0x000c) >> 2;
+ *ifc = ifc_divisors[tmp];
+ tmp = (frqcr & 0x2000) >> 11;
+ tmp |= frqcr & 0x0003;
+ *pfc = pfc_divisors[tmp];
+#endif
+#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SUBTYPE_SH73180)
+ *ifc = ifc_divisors[(frqcr>> 20) & 0x0007];
+ *bfc = bfc_divisors[(frqcr>> 12) & 0x0007];
+ *pfc = pfc_divisors[frqcr & 0x0007];
+#else
+ *ifc = ifc_divisors[(frqcr >> 6) & 0x0007];
+ *bfc = bfc_divisors[(frqcr >> 3) & 0x0007];
+ *pfc = pfc_divisors[frqcr & 0x0007];
+#endif
+#endif
+}
+
+/*
+ * This bit of ugliness builds up accessor routines to get at both
+ * the divisors and the physical values.
+ */
+#define _FREQ_TABLE(x) \
+ unsigned int get_##x##_divisor(unsigned int value) \
+ { return x##_divisors[value]; } \
+ \
+ unsigned int get_##x##_value(unsigned int divisor) \
+ { return x##_values[(divisor - 1)]; }
+
+_FREQ_TABLE(ifc);
+_FREQ_TABLE(bfc);
+_FREQ_TABLE(pfc);
+
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+
+/*
+ * The ST40 divisors are totally different so we set the cpu data
+ * clocks using a different algorithm
+ *
+ * I've just plugged this from the 2.4 code
+ * - Alex Bennee <kernel-hacker@bennee.com>
+ */
+#define CCN_PVR_CHIP_SHIFT 24
+#define CCN_PVR_CHIP_MASK 0xff
+#define CCN_PVR_CHIP_ST40STB1 0x4
+
+
+struct frqcr_data {
+ unsigned short frqcr;
+
+ struct {
+ unsigned char multiplier;
+ unsigned char divisor;
+ } factor[3];
+};
+
+static struct frqcr_data st40_frqcr_table[] = {
+ { 0x000, {{1,1}, {1,1}, {1,2}}},
+ { 0x002, {{1,1}, {1,1}, {1,4}}},
+ { 0x004, {{1,1}, {1,1}, {1,8}}},
+ { 0x008, {{1,1}, {1,2}, {1,2}}},
+ { 0x00A, {{1,1}, {1,2}, {1,4}}},
+ { 0x00C, {{1,1}, {1,2}, {1,8}}},
+ { 0x011, {{1,1}, {2,3}, {1,6}}},
+ { 0x013, {{1,1}, {2,3}, {1,3}}},
+ { 0x01A, {{1,1}, {1,2}, {1,4}}},
+ { 0x01C, {{1,1}, {1,2}, {1,8}}},
+ { 0x023, {{1,1}, {2,3}, {1,3}}},
+ { 0x02C, {{1,1}, {1,2}, {1,8}}},
+ { 0x048, {{1,2}, {1,2}, {1,4}}},
+ { 0x04A, {{1,2}, {1,2}, {1,6}}},
+ { 0x04C, {{1,2}, {1,2}, {1,8}}},
+ { 0x05A, {{1,2}, {1,3}, {1,6}}},
+ { 0x05C, {{1,2}, {1,3}, {1,6}}},
+ { 0x063, {{1,2}, {1,4}, {1,4}}},
+ { 0x06C, {{1,2}, {1,4}, {1,8}}},
+ { 0x091, {{1,3}, {1,3}, {1,6}}},
+ { 0x093, {{1,3}, {1,3}, {1,6}}},
+ { 0x0A3, {{1,3}, {1,6}, {1,6}}},
+ { 0x0DA, {{1,4}, {1,4}, {1,8}}},
+ { 0x0DC, {{1,4}, {1,4}, {1,8}}},
+ { 0x0EC, {{1,4}, {1,8}, {1,8}}},
+ { 0x123, {{1,4}, {1,4}, {1,8}}},
+ { 0x16C, {{1,4}, {1,8}, {1,8}}},
+};
+
+struct memclk_data {
+ unsigned char multiplier;
+ unsigned char divisor;
+};
+
+static struct memclk_data st40_memclk_table[8] = {
+ {1,1}, // 000
+ {1,2}, // 001
+ {1,3}, // 010
+ {2,3}, // 011
+ {1,4}, // 100
+ {1,6}, // 101
+ {1,8}, // 110
+ {1,8} // 111
+};
+
+static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr)
+{
+ unsigned int cpu_clock, master_clock, bus_clock, memory_clock;
+ struct frqcr_data *d;
+ int a;
+ unsigned long memclkcr;
+ struct memclk_data *e;
+
+ for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) {
+ d = &st40_frqcr_table[a];
+
+ if (d->frqcr == (frqcr & 0x1ff))
+ break;
+ }
+
+ if (a == ARRAY_SIZE(st40_frqcr_table)) {
+ d = st40_frqcr_table;
+
+ printk("ERROR: Unrecognised FRQCR value (0x%x), "
+ "using default multipliers\n", frqcr);
+ }
+
+ memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
+ e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
+
+ printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d "
+ "Mem: %d/%d Periph: %d/%d\n",
+ d->factor[0].multiplier, d->factor[0].divisor,
+ d->factor[1].multiplier, d->factor[1].divisor,
+ e->multiplier, e->divisor,
+ d->factor[2].multiplier, d->factor[2].divisor);
+
+ master_clock = module_clock * d->factor[2].divisor
+ / d->factor[2].multiplier;
+ bus_clock = master_clock * d->factor[1].multiplier
+ / d->factor[1].divisor;
+ memory_clock = master_clock * e->multiplier
+ / e->divisor;
+ cpu_clock = master_clock * d->factor[0].multiplier
+ / d->factor[0].divisor;
+
+ current_cpu_data.cpu_clock = cpu_clock;
+ current_cpu_data.master_clock = master_clock;
+ current_cpu_data.bus_clock = bus_clock;
+ current_cpu_data.memory_clock = memory_clock;
+ current_cpu_data.module_clock = module_clock;
+}
+#endif
+
+void __init time_init(void)
+{
+ unsigned int timer_freq = 0;
+ unsigned int ifc, pfc, bfc;
+ unsigned long interval;
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+ unsigned long pvr;
+ unsigned short frqcr;
+#endif
+
+ if (board_time_init)
+ board_time_init();
+
+ /*
+ * If we don't have an RTC (such as with the SH7300), don't attempt to
+ * probe the timer frequency. Rely on an either hardcoded peripheral
+ * clock value, or on the sh_pclk command line option. Note that we
+ * still need to have CONFIG_SH_PCLK_FREQ set in order for things like
+ * CLOCK_TICK_RATE to be sane.
+ */
+ current_cpu_data.module_clock = sh_pclk_freq;
+
+#ifdef CONFIG_SH_PCLK_CALC
+ /* XXX: Switch this over to a more generic test. */
+ {
+ unsigned int freq;
+
+ /*
+ * If we've specified a peripheral clock frequency, and we have
+ * an RTC, compare it against the autodetected value. Complain
+ * if there's a mismatch.
+ */
+ timer_freq = get_timer_frequency();
+ freq = timer_freq * 4;
+
+ if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) {
+ printk(KERN_NOTICE "Calculated peripheral clock value "
+ "%d differs from sh_pclk value %d, fixing..\n",
+ freq, sh_pclk_freq);
+ current_cpu_data.module_clock = freq;
+ }
+ }
+#endif
+
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+ /* XXX: Update ST40 code to use board_time_init() */
+ pvr = ctrl_inl(CCN_PVR);
+ frqcr = ctrl_inw(FRQCR);
+ printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr);
+
+ if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1)
+ st40_specific_time_init(current_cpu_data.module_clock, frqcr);
+ else
+#endif
+ get_current_frequency_divisors(&ifc, &bfc, &pfc);
+
+ if (rtc_get_time) {
+ rtc_get_time(&xtime);
+ } else {
+ xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ xtime.tv_nsec = 0;
+ }
+
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ if (board_timer_setup) {
+ board_timer_setup(&irq0);
+ } else {
+ setup_irq(TIMER_IRQ, &irq0);
+ }
+
+ /*
+ * for ST40 chips the current_cpu_data should already be set
+ * so not having valid pfc/bfc/ifc shouldn't be a problem
+ */
+ if (!current_cpu_data.master_clock)
+ current_cpu_data.master_clock = current_cpu_data.module_clock * pfc;
+ if (!current_cpu_data.bus_clock)
+ current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc;
+ if (!current_cpu_data.cpu_clock)
+ current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc;
+
+ printk("CPU clock: %d.%02dMHz\n",
+ (current_cpu_data.cpu_clock / 1000000),
+ (current_cpu_data.cpu_clock % 1000000)/10000);
+ printk("Bus clock: %d.%02dMHz\n",
+ (current_cpu_data.bus_clock / 1000000),
+ (current_cpu_data.bus_clock % 1000000)/10000);
+#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+ printk("Memory clock: %d.%02dMHz\n",
+ (current_cpu_data.memory_clock / 1000000),
+ (current_cpu_data.memory_clock % 1000000)/10000);
+#endif
+ printk("Module clock: %d.%02dMHz\n",
+ (current_cpu_data.module_clock / 1000000),
+ (current_cpu_data.module_clock % 1000000)/10000);
+
+ interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ;
+
+ printk("Interval = %ld\n", interval);
+
+ /* Start TMU0 */
+ ctrl_outb(0, TMU_TSTR);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+#endif
+ ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+ ctrl_outl(interval, TMU0_TCOR);
+ ctrl_outl(interval, TMU0_TCNT);
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+
+#if defined(CONFIG_SH_KGDB)
+ /*
+ * Set up kgdb as requested. We do it here because the serial
+ * init uses the timer vars we just set up for figuring baud.
+ */
+ kgdb_init();
+#endif
+}