Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
new file mode 100644
index 0000000..597d3ff
--- /dev/null
+++ b/arch/sparc/kernel/pcic.c
@@ -0,0 +1,1041 @@
+/*
+ * pcic.c: MicroSPARC-IIep PCI controller support
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ *
+ * Code is derived from Ultra/PCI PSYCHO controller support, see that
+ * for author info.
+ *
+ * Support for diverse IIep based platforms by Pete Zaitcev.
+ * CP-1200 by Eric Brower.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+
+#include <asm/ebus.h>
+#include <asm/sbus.h> /* for sanity check... */
+#include <asm/swift.h> /* for cache flushing. */
+#include <asm/io.h>
+
+#include <linux/ctype.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/oplib.h>
+#include <asm/pcic.h>
+#include <asm/timer.h>
+#include <asm/uaccess.h>
+
+
+unsigned int pcic_pin_to_irq(unsigned int pin, char *name);
+
+/*
+ * I studied different documents and many live PROMs both from 2.30
+ * family and 3.xx versions. I came to the amazing conclusion: there is
+ * absolutely no way to route interrupts in IIep systems relying on
+ * information which PROM presents. We must hardcode interrupt routing
+ * schematics. And this actually sucks. -- zaitcev 1999/05/12
+ *
+ * To find irq for a device we determine which routing map
+ * is in effect or, in other words, on which machine we are running.
+ * We use PROM name for this although other techniques may be used
+ * in special cases (Gleb reports a PROMless IIep based system).
+ * Once we know the map we take device configuration address and
+ * find PCIC pin number where INT line goes. Then we may either program
+ * preferred irq into the PCIC or supply the preexisting irq to the device.
+ */
+struct pcic_ca2irq {
+ unsigned char busno; /* PCI bus number */
+ unsigned char devfn; /* Configuration address */
+ unsigned char pin; /* PCIC external interrupt pin */
+ unsigned char irq; /* Preferred IRQ (mappable in PCIC) */
+ unsigned int force; /* Enforce preferred IRQ */
+};
+
+struct pcic_sn2list {
+ char *sysname;
+ struct pcic_ca2irq *intmap;
+ int mapdim;
+};
+
+/*
+ * JavaEngine-1 apparently has different versions.
+ *
+ * According to communications with Sun folks, for P2 build 501-4628-03:
+ * pin 0 - parallel, audio;
+ * pin 1 - Ethernet;
+ * pin 2 - su;
+ * pin 3 - PS/2 kbd and mouse.
+ *
+ * OEM manual (805-1486):
+ * pin 0: Ethernet
+ * pin 1: All EBus
+ * pin 2: IGA (unused)
+ * pin 3: Not connected
+ * OEM manual says that 501-4628 & 501-4811 are the same thing,
+ * only the latter has NAND flash in place.
+ *
+ * So far unofficial Sun wins over the OEM manual. Poor OEMs...
+ */
+static struct pcic_ca2irq pcic_i_je1a[] = { /* 501-4811-03 */
+ { 0, 0x00, 2, 12, 0 }, /* EBus: hogs all */
+ { 0, 0x01, 1, 6, 1 }, /* Happy Meal */
+ { 0, 0x80, 0, 7, 0 }, /* IGA (unused) */
+};
+
+/* XXX JS-E entry is incomplete - PCI Slot 2 address (pin 7)? */
+static struct pcic_ca2irq pcic_i_jse[] = {
+ { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
+ { 0, 0x01, 1, 6, 0 }, /* hme */
+ { 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */
+ { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */
+ { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */
+ { 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */
+ { 0, 0x80, 5, 11, 0 }, /* EIDE */
+ /* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */
+ { 0, 0xA0, 4, 9, 0 }, /* USB */
+ /*
+ * Some pins belong to non-PCI devices, we hardcode them in drivers.
+ * sun4m timers - irq 10, 14
+ * PC style RTC - pin 7, irq 4 ?
+ * Smart card, Parallel - pin 4 shared with USB, ISA
+ * audio - pin 3, irq 5 ?
+ */
+};
+
+/* SPARCengine-6 was the original release name of CP1200.
+ * The documentation differs between the two versions
+ */
+static struct pcic_ca2irq pcic_i_se6[] = {
+ { 0, 0x08, 0, 2, 0 }, /* SCSI */
+ { 0, 0x01, 1, 6, 0 }, /* HME */
+ { 0, 0x00, 3, 13, 0 }, /* EBus */
+};
+
+/*
+ * Krups (courtesy of Varol Kaptan)
+ * No documentation available, but it was easy to guess
+ * because it was very similar to Espresso.
+ *
+ * pin 0 - kbd, mouse, serial;
+ * pin 1 - Ethernet;
+ * pin 2 - igs (we do not use it);
+ * pin 3 - audio;
+ * pin 4,5,6 - unused;
+ * pin 7 - RTC (from P2 onwards as David B. says).
+ */
+static struct pcic_ca2irq pcic_i_jk[] = {
+ { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
+ { 0, 0x01, 1, 6, 0 }, /* hme */
+};
+
+/*
+ * Several entries in this list may point to the same routing map
+ * as several PROMs may be installed on the same physical board.
+ */
+#define SN2L_INIT(name, map) \
+ { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) }
+
+static struct pcic_sn2list pcic_known_sysnames[] = {
+ SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */
+ SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */
+ SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */
+ SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */
+ SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */
+ { NULL, NULL, 0 }
+};
+
+/*
+ * Only one PCIC per IIep,
+ * and since we have no SMP IIep, only one per system.
+ */
+static int pcic0_up;
+static struct linux_pcic pcic0;
+
+void * __iomem pcic_regs;
+volatile int pcic_speculative;
+volatile int pcic_trapped;
+
+static void pci_do_gettimeofday(struct timeval *tv);
+static int pci_do_settimeofday(struct timespec *tv);
+
+#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
+
+static int pcic_read_config_dword(unsigned int busno, unsigned int devfn,
+ int where, u32 *value)
+{
+ struct linux_pcic *pcic;
+ unsigned long flags;
+
+ pcic = &pcic0;
+
+ local_irq_save(flags);
+#if 0 /* does not fail here */
+ pcic_speculative = 1;
+ pcic_trapped = 0;
+#endif
+ writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
+#if 0 /* does not fail here */
+ nop();
+ if (pcic_trapped) {
+ local_irq_restore(flags);
+ *value = ~0;
+ return 0;
+ }
+#endif
+ pcic_speculative = 2;
+ pcic_trapped = 0;
+ *value = readl(pcic->pcic_config_space_data + (where&4));
+ nop();
+ if (pcic_trapped) {
+ pcic_speculative = 0;
+ local_irq_restore(flags);
+ *value = ~0;
+ return 0;
+ }
+ pcic_speculative = 0;
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ unsigned int v;
+
+ if (bus->number != 0) return -EINVAL;
+ switch (size) {
+ case 1:
+ pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+ *val = 0xff & (v >> (8*(where & 3)));
+ return 0;
+ case 2:
+ if (where&1) return -EINVAL;
+ pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+ *val = 0xffff & (v >> (8*(where & 3)));
+ return 0;
+ case 4:
+ if (where&3) return -EINVAL;
+ pcic_read_config_dword(bus->number, devfn, where&~3, val);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int pcic_write_config_dword(unsigned int busno, unsigned int devfn,
+ int where, u32 value)
+{
+ struct linux_pcic *pcic;
+ unsigned long flags;
+
+ pcic = &pcic0;
+
+ local_irq_save(flags);
+ writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
+ writel(value, pcic->pcic_config_space_data + (where&4));
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ unsigned int v;
+
+ if (bus->number != 0) return -EINVAL;
+ switch (size) {
+ case 1:
+ pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+ v = (v & ~(0xff << (8*(where&3)))) |
+ ((0xff&val) << (8*(where&3)));
+ return pcic_write_config_dword(bus->number, devfn, where&~3, v);
+ case 2:
+ if (where&1) return -EINVAL;
+ pcic_read_config_dword(bus->number, devfn, where&~3, &v);
+ v = (v & ~(0xffff << (8*(where&3)))) |
+ ((0xffff&val) << (8*(where&3)));
+ return pcic_write_config_dword(bus->number, devfn, where&~3, v);
+ case 4:
+ if (where&3) return -EINVAL;
+ return pcic_write_config_dword(bus->number, devfn, where, val);
+ }
+ return -EINVAL;
+}
+
+static struct pci_ops pcic_ops = {
+ .read = pcic_read_config,
+ .write = pcic_write_config,
+};
+
+/*
+ * On sparc64 pcibios_init() calls pci_controller_probe().
+ * We want PCIC probed little ahead so that interrupt controller
+ * would be operational.
+ */
+int __init pcic_probe(void)
+{
+ struct linux_pcic *pcic;
+ struct linux_prom_registers regs[PROMREG_MAX];
+ struct linux_pbm_info* pbm;
+ char namebuf[64];
+ int node;
+ int err;
+
+ if (pcic0_up) {
+ prom_printf("PCIC: called twice!\n");
+ prom_halt();
+ }
+ pcic = &pcic0;
+
+ node = prom_getchild (prom_root_node);
+ node = prom_searchsiblings (node, "pci");
+ if (node == 0)
+ return -ENODEV;
+ /*
+ * Map in PCIC register set, config space, and IO base
+ */
+ err = prom_getproperty(node, "reg", (char*)regs, sizeof(regs));
+ if (err == 0 || err == -1) {
+ prom_printf("PCIC: Error, cannot get PCIC registers "
+ "from PROM.\n");
+ prom_halt();
+ }
+
+ pcic0_up = 1;
+
+ pcic->pcic_res_regs.name = "pcic_registers";
+ pcic->pcic_regs = ioremap(regs[0].phys_addr, regs[0].reg_size);
+ if (!pcic->pcic_regs) {
+ prom_printf("PCIC: Error, cannot map PCIC registers.\n");
+ prom_halt();
+ }
+
+ pcic->pcic_res_io.name = "pcic_io";
+ if ((pcic->pcic_io = (unsigned long)
+ ioremap(regs[1].phys_addr, 0x10000)) == 0) {
+ prom_printf("PCIC: Error, cannot map PCIC IO Base.\n");
+ prom_halt();
+ }
+
+ pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
+ if ((pcic->pcic_config_space_addr =
+ ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) {
+ prom_printf("PCIC: Error, cannot map"
+ "PCI Configuration Space Address.\n");
+ prom_halt();
+ }
+
+ /*
+ * Docs say three least significant bits in address and data
+ * must be the same. Thus, we need adjust size of data.
+ */
+ pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
+ if ((pcic->pcic_config_space_data =
+ ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) {
+ prom_printf("PCIC: Error, cannot map"
+ "PCI Configuration Space Data.\n");
+ prom_halt();
+ }
+
+ pbm = &pcic->pbm;
+ pbm->prom_node = node;
+ prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
+ strcpy(pbm->prom_name, namebuf);
+
+ {
+ extern volatile int t_nmi[1];
+ extern int pcic_nmi_trap_patch[1];
+
+ t_nmi[0] = pcic_nmi_trap_patch[0];
+ t_nmi[1] = pcic_nmi_trap_patch[1];
+ t_nmi[2] = pcic_nmi_trap_patch[2];
+ t_nmi[3] = pcic_nmi_trap_patch[3];
+ swift_flush_dcache();
+ pcic_regs = pcic->pcic_regs;
+ }
+
+ prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0;
+ {
+ struct pcic_sn2list *p;
+
+ for (p = pcic_known_sysnames; p->sysname != NULL; p++) {
+ if (strcmp(namebuf, p->sysname) == 0)
+ break;
+ }
+ pcic->pcic_imap = p->intmap;
+ pcic->pcic_imdim = p->mapdim;
+ }
+ if (pcic->pcic_imap == NULL) {
+ /*
+ * We do not panic here for the sake of embedded systems.
+ */
+ printk("PCIC: System %s is unknown, cannot route interrupts\n",
+ namebuf);
+ }
+
+ return 0;
+}
+
+static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
+{
+ struct linux_pbm_info *pbm = &pcic->pbm;
+
+ pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm);
+#if 0 /* deadwood transplanted from sparc64 */
+ pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
+ pci_record_assignments(pbm, pbm->pci_bus);
+ pci_assign_unassigned(pbm, pbm->pci_bus);
+ pci_fixup_irq(pbm, pbm->pci_bus);
+#endif
+}
+
+/*
+ * Main entry point from the PCI subsystem.
+ */
+static int __init pcic_init(void)
+{
+ struct linux_pcic *pcic;
+
+ /*
+ * PCIC should be initialized at start of the timer.
+ * So, here we report the presence of PCIC and do some magic passes.
+ */
+ if(!pcic0_up)
+ return 0;
+ pcic = &pcic0;
+
+ /*
+ * Switch off IOTLB translation.
+ */
+ writeb(PCI_DVMA_CONTROL_IOTLB_DISABLE,
+ pcic->pcic_regs+PCI_DVMA_CONTROL);
+
+ /*
+ * Increase mapped size for PCI memory space (DMA access).
+ * Should be done in that order (size first, address second).
+ * Why we couldn't set up 4GB and forget about it? XXX
+ */
+ writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0);
+ writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY,
+ pcic->pcic_regs+PCI_BASE_ADDRESS_0);
+
+ pcic_pbm_scan_bus(pcic);
+
+ ebus_init();
+ return 0;
+}
+
+int pcic_present(void)
+{
+ return pcic0_up;
+}
+
+static int __init pdev_to_pnode(struct linux_pbm_info *pbm,
+ struct pci_dev *pdev)
+{
+ struct linux_prom_pci_registers regs[PROMREG_MAX];
+ int err;
+ int node = prom_getchild(pbm->prom_node);
+
+ while(node) {
+ err = prom_getproperty(node, "reg",
+ (char *)®s[0], sizeof(regs));
+ if(err != 0 && err != -1) {
+ unsigned long devfn = (regs[0].which_io >> 8) & 0xff;
+ if(devfn == pdev->devfn)
+ return node;
+ }
+ node = prom_getsibling(node);
+ }
+ return 0;
+}
+
+static inline struct pcidev_cookie *pci_devcookie_alloc(void)
+{
+ return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC);
+}
+
+static void pcic_map_pci_device(struct linux_pcic *pcic,
+ struct pci_dev *dev, int node)
+{
+ char namebuf[64];
+ unsigned long address;
+ unsigned long flags;
+ int j;
+
+ if (node == 0 || node == -1) {
+ strcpy(namebuf, "???");
+ } else {
+ prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
+ }
+
+ for (j = 0; j < 6; j++) {
+ address = dev->resource[j].start;
+ if (address == 0) break; /* are sequential */
+ flags = dev->resource[j].flags;
+ if ((flags & IORESOURCE_IO) != 0) {
+ if (address < 0x10000) {
+ /*
+ * A device responds to I/O cycles on PCI.
+ * We generate these cycles with memory
+ * access into the fixed map (phys 0x30000000).
+ *
+ * Since a device driver does not want to
+ * do ioremap() before accessing PC-style I/O,
+ * we supply virtual, ready to access address.
+ *
+ * Ebus devices do not come here even if
+ * CheerIO makes a similar conversion.
+ * See ebus.c for details.
+ *
+ * Note that check_region()/request_region()
+ * work for these devices.
+ *
+ * XXX Neat trick, but it's a *bad* idea
+ * to shit into regions like that.
+ * What if we want to allocate one more
+ * PCI base address...
+ */
+ dev->resource[j].start =
+ pcic->pcic_io + address;
+ dev->resource[j].end = 1; /* XXX */
+ dev->resource[j].flags =
+ (flags & ~IORESOURCE_IO) | IORESOURCE_MEM;
+ } else {
+ /*
+ * OOPS... PCI Spec allows this. Sun does
+ * not have any devices getting above 64K
+ * so it must be user with a weird I/O
+ * board in a PCI slot. We must remap it
+ * under 64K but it is not done yet. XXX
+ */
+ printk("PCIC: Skipping I/O space at 0x%lx,"
+ "this will Oops if a driver attaches;"
+ "device '%s' at %02x:%02x)\n", address,
+ namebuf, dev->bus->number, dev->devfn);
+ }
+ }
+ }
+}
+
+static void
+pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
+{
+ struct pcic_ca2irq *p;
+ int i, ivec;
+ char namebuf[64];
+
+ if (node == 0 || node == -1) {
+ strcpy(namebuf, "???");
+ } else {
+ prom_getstring(node, "name", namebuf, sizeof(namebuf));
+ }
+
+ if ((p = pcic->pcic_imap) == 0) {
+ dev->irq = 0;
+ return;
+ }
+ for (i = 0; i < pcic->pcic_imdim; i++) {
+ if (p->busno == dev->bus->number && p->devfn == dev->devfn)
+ break;
+ p++;
+ }
+ if (i >= pcic->pcic_imdim) {
+ printk("PCIC: device %s devfn %02x:%02x not found in %d\n",
+ namebuf, dev->bus->number, dev->devfn, pcic->pcic_imdim);
+ dev->irq = 0;
+ return;
+ }
+
+ i = p->pin;
+ if (i >= 0 && i < 4) {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
+ dev->irq = ivec >> (i << 2) & 0xF;
+ } else if (i >= 4 && i < 8) {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
+ dev->irq = ivec >> ((i-4) << 2) & 0xF;
+ } else { /* Corrupted map */
+ printk("PCIC: BAD PIN %d\n", i); for (;;) {}
+ }
+/* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */
+
+ /*
+ * dev->irq=0 means PROM did not bother to program the upper
+ * half of PCIC. This happens on JS-E with PROM 3.11, for instance.
+ */
+ if (dev->irq == 0 || p->force) {
+ if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */
+ printk("PCIC: BAD IRQ %d\n", p->irq); for (;;) {}
+ }
+ printk("PCIC: setting irq %d at pin %d for device %02x:%02x\n",
+ p->irq, p->pin, dev->bus->number, dev->devfn);
+ dev->irq = p->irq;
+
+ i = p->pin;
+ if (i >= 4) {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
+ ivec &= ~(0xF << ((i - 4) << 2));
+ ivec |= p->irq << ((i - 4) << 2);
+ writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_HI);
+ } else {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
+ ivec &= ~(0xF << (i << 2));
+ ivec |= p->irq << (i << 2);
+ writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO);
+ }
+ }
+
+ return;
+}
+
+/*
+ * Normally called from {do_}pci_scan_bus...
+ */
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ int i, has_io, has_mem;
+ unsigned int cmd;
+ struct linux_pcic *pcic;
+ /* struct linux_pbm_info* pbm = &pcic->pbm; */
+ int node;
+ struct pcidev_cookie *pcp;
+
+ if (!pcic0_up) {
+ printk("pcibios_fixup_bus: no PCIC\n");
+ return;
+ }
+ pcic = &pcic0;
+
+ /*
+ * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus);
+ */
+ if (bus->number != 0) {
+ printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number);
+ return;
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+
+ /*
+ * Comment from i386 branch:
+ * There are buggy BIOSes that forget to enable I/O and memory
+ * access to PCI devices. We try to fix this, but we need to
+ * be sure that the BIOS didn't forget to assign an address
+ * to the device. [mj]
+ * OBP is a case of such BIOS :-)
+ */
+ has_io = has_mem = 0;
+ for(i=0; i<6; i++) {
+ unsigned long f = dev->resource[i].flags;
+ if (f & IORESOURCE_IO) {
+ has_io = 1;
+ } else if (f & IORESOURCE_MEM)
+ has_mem = 1;
+ }
+ pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
+ if (has_io && !(cmd & PCI_COMMAND_IO)) {
+ printk("PCIC: Enabling I/O for device %02x:%02x\n",
+ dev->bus->number, dev->devfn);
+ cmd |= PCI_COMMAND_IO;
+ pcic_write_config(dev->bus, dev->devfn,
+ PCI_COMMAND, 2, cmd);
+ }
+ if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
+ printk("PCIC: Enabling memory for device %02x:%02x\n",
+ dev->bus->number, dev->devfn);
+ cmd |= PCI_COMMAND_MEMORY;
+ pcic_write_config(dev->bus, dev->devfn,
+ PCI_COMMAND, 2, cmd);
+ }
+
+ node = pdev_to_pnode(&pcic->pbm, dev);
+ if(node == 0)
+ node = -1;
+
+ /* cookies */
+ pcp = pci_devcookie_alloc();
+ pcp->pbm = &pcic->pbm;
+ pcp->prom_node = node;
+ dev->sysdata = pcp;
+
+ /* fixing I/O to look like memory */
+ if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE)
+ pcic_map_pci_device(pcic, dev, node);
+
+ pcic_fill_irq(pcic, dev, node);
+ }
+}
+
+/*
+ * pcic_pin_to_irq() is exported to ebus.c.
+ */
+unsigned int
+pcic_pin_to_irq(unsigned int pin, char *name)
+{
+ struct linux_pcic *pcic = &pcic0;
+ unsigned int irq;
+ unsigned int ivec;
+
+ if (pin < 4) {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
+ irq = ivec >> (pin << 2) & 0xF;
+ } else if (pin < 8) {
+ ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
+ irq = ivec >> ((pin-4) << 2) & 0xF;
+ } else { /* Corrupted map */
+ printk("PCIC: BAD PIN %d FOR %s\n", pin, name);
+ for (;;) {} /* XXX Cannot panic properly in case of PROLL */
+ }
+/* P3 */ /* printk("PCIC: dev %s pin %d ivec 0x%x irq %x\n", name, pin, ivec, irq); */
+ return irq;
+}
+
+/* Makes compiler happy */
+static volatile int pcic_timer_dummy;
+
+static void pcic_clear_clock_irq(void)
+{
+ pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT);
+}
+
+static irqreturn_t pcic_timer_handler (int irq, void *h, struct pt_regs *regs)
+{
+ write_seqlock(&xtime_lock); /* Dummy, to show that we remember */
+ pcic_clear_clock_irq();
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */
+#define TICK_TIMER_LIMIT ((100*1000000/4)/100)
+
+void __init pci_time_init(void)
+{
+ struct linux_pcic *pcic = &pcic0;
+ unsigned long v;
+ int timer_irq, irq;
+
+ /* A hack until do_gettimeofday prototype is moved to arch specific headers
+ and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
+ ((unsigned int *)do_gettimeofday)[0] =
+ 0x10800000 | ((((unsigned long)pci_do_gettimeofday -
+ (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
+ ((unsigned int *)do_gettimeofday)[1] = 0x01000000;
+ BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
+ btfixup();
+
+ writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
+ /* PROM should set appropriate irq */
+ v = readb(pcic->pcic_regs+PCI_COUNTER_IRQ);
+ timer_irq = PCI_COUNTER_IRQ_SYS(v);
+ writel (PCI_COUNTER_IRQ_SET(timer_irq, 0),
+ pcic->pcic_regs+PCI_COUNTER_IRQ);
+ irq = request_irq(timer_irq, pcic_timer_handler,
+ (SA_INTERRUPT | SA_STATIC_ALLOC), "timer", NULL);
+ if (irq) {
+ prom_printf("time_init: unable to attach IRQ%d\n", timer_irq);
+ prom_halt();
+ }
+ local_irq_enable();
+}
+
+static __inline__ unsigned long do_gettimeoffset(void)
+{
+ /*
+ * We devide all to 100
+ * to have microsecond resolution and to avoid overflow
+ */
+ unsigned long count =
+ readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+ count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
+ return count;
+}
+
+extern unsigned long wall_jiffies;
+
+static void pci_do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+ unsigned long max_ntp_tick = tick_usec - tickadj;
+
+ do {
+ unsigned long lost;
+
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = do_gettimeoffset();
+ lost = jiffies - wall_jiffies;
+
+ /*
+ * If time_adjust is negative then NTP is slowing the clock
+ * so make sure not to go into next possible interval.
+ * Better to lose some accuracy than have time go backwards..
+ */
+ if (unlikely(time_adjust < 0)) {
+ usec = min(usec, max_ntp_tick);
+
+ if (lost)
+ usec += lost * max_ntp_tick;
+ }
+ else if (unlikely(lost))
+ usec += lost * tick_usec;
+
+ sec = xtime.tv_sec;
+ usec += (xtime.tv_nsec / 1000);
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+static int pci_do_settimeofday(struct timespec *tv)
+{
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ tv->tv_nsec -= 1000 * (do_gettimeoffset() +
+ (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ));
+ while (tv->tv_nsec < 0) {
+ tv->tv_nsec += NSEC_PER_SEC;
+ tv->tv_sec--;
+ }
+
+ wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
+ wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
+
+ if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
+ wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
+ wall_to_monotonic.tv_sec++;
+ }
+ if (wall_to_monotonic.tv_nsec < 0) {
+ wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
+ wall_to_monotonic.tv_sec--;
+ }
+
+ xtime.tv_sec = tv->tv_sec;
+ xtime.tv_nsec = tv->tv_nsec;
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ return 0;
+}
+
+#if 0
+static void watchdog_reset() {
+ writeb(0, pcic->pcic_regs+PCI_SYS_STATUS);
+}
+#endif
+
+/*
+ * Other archs parse arguments here.
+ */
+char * __init pcibios_setup(char *str)
+{
+ return str;
+}
+
+void pcibios_align_resource(void *data, struct resource *res,
+ unsigned long size, unsigned long align)
+{
+}
+
+int pcibios_enable_device(struct pci_dev *pdev, int mask)
+{
+ return 0;
+}
+
+/*
+ * NMI
+ */
+void pcic_nmi(unsigned int pend, struct pt_regs *regs)
+{
+
+ pend = flip_dword(pend);
+
+ if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) {
+ /*
+ * XXX On CP-1200 PCI #SERR may happen, we do not know
+ * what to do about it yet.
+ */
+ printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n",
+ pend, (int)regs->pc, pcic_speculative);
+ for (;;) { }
+ }
+ pcic_speculative = 0;
+ pcic_trapped = 1;
+ regs->pc = regs->npc;
+ regs->npc += 4;
+}
+
+static inline unsigned long get_irqmask(int irq_nr)
+{
+ return 1 << irq_nr;
+}
+
+static inline char *pcic_irq_itoa(unsigned int irq)
+{
+ static char buff[16];
+ sprintf(buff, "%d", irq);
+ return buff;
+}
+
+static void pcic_disable_irq(unsigned int irq_nr)
+{
+ unsigned long mask, flags;
+
+ mask = get_irqmask(irq_nr);
+ local_irq_save(flags);
+ writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
+ local_irq_restore(flags);
+}
+
+static void pcic_enable_irq(unsigned int irq_nr)
+{
+ unsigned long mask, flags;
+
+ mask = get_irqmask(irq_nr);
+ local_irq_save(flags);
+ writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
+ local_irq_restore(flags);
+}
+
+static void pcic_clear_profile_irq(int cpu)
+{
+ printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
+}
+
+static void pcic_load_profile_irq(int cpu, unsigned int limit)
+{
+ printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
+}
+
+/* We assume the caller has disabled local interrupts when these are called,
+ * or else very bizarre behavior will result.
+ */
+static void pcic_disable_pil_irq(unsigned int pil)
+{
+ writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
+}
+
+static void pcic_enable_pil_irq(unsigned int pil)
+{
+ writel(get_irqmask(pil), pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
+}
+
+void __init sun4m_pci_init_IRQ(void)
+{
+ BTFIXUPSET_CALL(enable_irq, pcic_enable_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(disable_irq, pcic_disable_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
+ BTFIXUPSET_CALL(__irq_itoa, pcic_irq_itoa, BTFIXUPCALL_NORM);
+}
+
+int pcibios_assign_resource(struct pci_dev *pdev, int resource)
+{
+ return -ENXIO;
+}
+
+/*
+ * This probably belongs here rather than ioport.c because
+ * we do not want this crud linked into SBus kernels.
+ * Also, think for a moment about likes of floppy.c that
+ * include architecture specific parts. They may want to redefine ins/outs.
+ *
+ * We do not use horroble macroses here because we want to
+ * advance pointer by sizeof(size).
+ */
+void outsb(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ outb(*(const char *)src, addr);
+ src += 1;
+ /* addr += 1; */
+ }
+}
+
+void outsw(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ outw(*(const short *)src, addr);
+ src += 2;
+ /* addr += 2; */
+ }
+}
+
+void outsl(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ outl(*(const long *)src, addr);
+ src += 4;
+ /* addr += 4; */
+ }
+}
+
+void insb(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ *(unsigned char *)dst = inb(addr);
+ dst += 1;
+ /* addr += 1; */
+ }
+}
+
+void insw(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ *(unsigned short *)dst = inw(addr);
+ dst += 2;
+ /* addr += 2; */
+ }
+}
+
+void insl(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ /*
+ * XXX I am sure we are in for an unaligned trap here.
+ */
+ *(unsigned long *)dst = inl(addr);
+ dst += 4;
+ /* addr += 4; */
+ }
+}
+
+subsys_initcall(pcic_init);