Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
new file mode 100644
index 0000000..b4ffaaa
--- /dev/null
+++ b/arch/um/kernel/skas/process.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <sched.h>
+#include <sys/wait.h>
+#include <sys/mman.h>
+#include <sys/user.h>
+#include <asm/unistd.h>
+#include "user.h"
+#include "ptrace_user.h"
+#include "time_user.h"
+#include "sysdep/ptrace.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "skas.h"
+#include "sysdep/sigcontext.h"
+#include "os.h"
+#include "proc_mm.h"
+#include "skas_ptrace.h"
+#include "chan_user.h"
+#include "signal_user.h"
+#include "registers.h"
+
+int is_skas_winch(int pid, int fd, void *data)
+{
+ if(pid != os_getpid())
+ return(0);
+
+ register_winch_irq(-1, fd, -1, data);
+ return(1);
+}
+
+static void handle_segv(int pid)
+{
+ struct ptrace_faultinfo fault;
+ int err;
+
+ err = ptrace(PTRACE_FAULTINFO, pid, 0, &fault);
+ if(err)
+ panic("handle_segv - PTRACE_FAULTINFO failed, errno = %d\n",
+ errno);
+
+ segv(fault.addr, 0, FAULT_WRITE(fault.is_write), 1, NULL);
+}
+
+/*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/
+static void handle_trap(int pid, union uml_pt_regs *regs, int local_using_sysemu)
+{
+ int err, status;
+
+ /* Mark this as a syscall */
+ UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->skas.regs);
+
+ if (!local_using_sysemu)
+ {
+ err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET, __NR_getpid);
+ if(err < 0)
+ panic("handle_trap - nullifying syscall failed errno = %d\n",
+ errno);
+
+ err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
+ if(err < 0)
+ panic("handle_trap - continuing to end of syscall failed, "
+ "errno = %d\n", errno);
+
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ if((err < 0) || !WIFSTOPPED(status) ||
+ (WSTOPSIG(status) != SIGTRAP + 0x80))
+ panic("handle_trap - failed to wait at end of syscall, "
+ "errno = %d, status = %d\n", errno, status);
+ }
+
+ handle_syscall(regs);
+}
+
+static int userspace_tramp(void *arg)
+{
+ init_new_thread_signals(0);
+ enable_timer();
+ ptrace(PTRACE_TRACEME, 0, 0, 0);
+ os_stop_process(os_getpid());
+ return(0);
+}
+
+/* Each element set once, and only accessed by a single processor anyway */
+#undef NR_CPUS
+#define NR_CPUS 1
+int userspace_pid[NR_CPUS];
+
+void start_userspace(int cpu)
+{
+ void *stack;
+ unsigned long sp;
+ int pid, status, n;
+
+ stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if(stack == MAP_FAILED)
+ panic("start_userspace : mmap failed, errno = %d", errno);
+ sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
+
+ pid = clone(userspace_tramp, (void *) sp,
+ CLONE_FILES | CLONE_VM | SIGCHLD, NULL);
+ if(pid < 0)
+ panic("start_userspace : clone failed, errno = %d", errno);
+
+ do {
+ CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
+ if(n < 0)
+ panic("start_userspace : wait failed, errno = %d",
+ errno);
+ } while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
+
+ if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
+ panic("start_userspace : expected SIGSTOP, got status = %d",
+ status);
+
+ if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0)
+ panic("start_userspace : PTRACE_SETOPTIONS failed, errno=%d\n",
+ errno);
+
+ if(munmap(stack, PAGE_SIZE) < 0)
+ panic("start_userspace : munmap failed, errno = %d\n", errno);
+
+ userspace_pid[cpu] = pid;
+}
+
+void userspace(union uml_pt_regs *regs)
+{
+ int err, status, op, pid = userspace_pid[0];
+ int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/
+
+ while(1){
+ restore_registers(pid, regs);
+
+ /* Now we set local_using_sysemu to be used for one loop */
+ local_using_sysemu = get_using_sysemu();
+
+ op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL));
+
+ err = ptrace(op, pid, 0, 0);
+ if(err)
+ panic("userspace - could not resume userspace process, "
+ "pid=%d, ptrace operation = %d, errno = %d\n",
+ op, errno);
+
+ CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
+ if(err < 0)
+ panic("userspace - waitpid failed, errno = %d\n",
+ errno);
+
+ regs->skas.is_user = 1;
+ save_registers(pid, regs);
+ UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
+
+ if(WIFSTOPPED(status)){
+ switch(WSTOPSIG(status)){
+ case SIGSEGV:
+ handle_segv(pid);
+ break;
+ case SIGTRAP + 0x80:
+ handle_trap(pid, regs, local_using_sysemu);
+ break;
+ case SIGTRAP:
+ relay_signal(SIGTRAP, regs);
+ break;
+ case SIGIO:
+ case SIGVTALRM:
+ case SIGILL:
+ case SIGBUS:
+ case SIGFPE:
+ case SIGWINCH:
+ user_signal(WSTOPSIG(status), regs);
+ break;
+ default:
+ printk("userspace - child stopped with signal "
+ "%d\n", WSTOPSIG(status));
+ }
+ interrupt_end();
+
+ /* Avoid -ERESTARTSYS handling in host */
+ PT_SYSCALL_NR(regs->skas.regs) = -1;
+ }
+ }
+}
+
+void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
+ void (*handler)(int))
+{
+ unsigned long flags;
+ sigjmp_buf switch_buf, fork_buf;
+
+ *switch_buf_ptr = &switch_buf;
+ *fork_buf_ptr = &fork_buf;
+
+ /* Somewhat subtle - siglongjmp restores the signal mask before doing
+ * the longjmp. This means that when jumping from one stack to another
+ * when the target stack has interrupts enabled, an interrupt may occur
+ * on the source stack. This is bad when starting up a process because
+ * it's not supposed to get timer ticks until it has been scheduled.
+ * So, we disable interrupts around the sigsetjmp to ensure that
+ * they can't happen until we get back here where they are safe.
+ */
+ flags = get_signals();
+ block_signals();
+ if(sigsetjmp(fork_buf, 1) == 0)
+ new_thread_proc(stack, handler);
+
+ remove_sigstack();
+
+ set_signals(flags);
+}
+
+void thread_wait(void *sw, void *fb)
+{
+ sigjmp_buf buf, **switch_buf = sw, *fork_buf;
+
+ *switch_buf = &buf;
+ fork_buf = fb;
+ if(sigsetjmp(buf, 1) == 0)
+ siglongjmp(*fork_buf, 1);
+}
+
+void switch_threads(void *me, void *next)
+{
+ sigjmp_buf my_buf, **me_ptr = me, *next_buf = next;
+
+ *me_ptr = &my_buf;
+ if(sigsetjmp(my_buf, 1) == 0)
+ siglongjmp(*next_buf, 1);
+}
+
+static sigjmp_buf initial_jmpbuf;
+
+/* XXX Make these percpu */
+static void (*cb_proc)(void *arg);
+static void *cb_arg;
+static sigjmp_buf *cb_back;
+
+int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
+{
+ sigjmp_buf **switch_buf = switch_buf_ptr;
+ int n;
+
+ *fork_buf_ptr = &initial_jmpbuf;
+ n = sigsetjmp(initial_jmpbuf, 1);
+ if(n == 0)
+ new_thread_proc((void *) stack, new_thread_handler);
+ else if(n == 1)
+ remove_sigstack();
+ else if(n == 2){
+ (*cb_proc)(cb_arg);
+ siglongjmp(*cb_back, 1);
+ }
+ else if(n == 3){
+ kmalloc_ok = 0;
+ return(0);
+ }
+ else if(n == 4){
+ kmalloc_ok = 0;
+ return(1);
+ }
+ siglongjmp(**switch_buf, 1);
+}
+
+void remove_sigstack(void)
+{
+ stack_t stack = ((stack_t) { .ss_flags = SS_DISABLE,
+ .ss_sp = NULL,
+ .ss_size = 0 });
+
+ if(sigaltstack(&stack, NULL) != 0)
+ panic("disabling signal stack failed, errno = %d\n", errno);
+}
+
+void initial_thread_cb_skas(void (*proc)(void *), void *arg)
+{
+ sigjmp_buf here;
+
+ cb_proc = proc;
+ cb_arg = arg;
+ cb_back = &here;
+
+ block_signals();
+ if(sigsetjmp(here, 1) == 0)
+ siglongjmp(initial_jmpbuf, 2);
+ unblock_signals();
+
+ cb_proc = NULL;
+ cb_arg = NULL;
+ cb_back = NULL;
+}
+
+void halt_skas(void)
+{
+ block_signals();
+ siglongjmp(initial_jmpbuf, 3);
+}
+
+void reboot_skas(void)
+{
+ block_signals();
+ siglongjmp(initial_jmpbuf, 4);
+}
+
+void switch_mm_skas(int mm_fd)
+{
+ int err;
+
+#warning need cpu pid in switch_mm_skas
+ err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0, mm_fd);
+ if(err)
+ panic("switch_mm_skas - PTRACE_SWITCH_MM failed, errno = %d\n",
+ errno);
+}
+
+void kill_off_processes_skas(void)
+{
+#warning need to loop over userspace_pids in kill_off_processes_skas
+ os_kill_ptraced_process(userspace_pid[0], 1);
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only. This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */