Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
new file mode 100644
index 0000000..9da9254
--- /dev/null
+++ b/drivers/net/yellowfin.c
@@ -0,0 +1,1499 @@
+/* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
+/*
+ Written 1997-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
+ It also supports the Symbios Logic version of the same chip core.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/yellowfin.html
+
+
+ Linux kernel changelog:
+ -----------------------
+
+ LK1.1.1 (jgarzik): Port to 2.4 kernel
+
+ LK1.1.2 (jgarzik):
+ * Merge in becker version 1.05
+
+ LK1.1.3 (jgarzik):
+ * Various cleanups
+ * Update yellowfin_timer to correctly calculate duplex.
+ (suggested by Manfred Spraul)
+
+ LK1.1.4 (val@nmt.edu):
+ * Fix three endian-ness bugs
+ * Support dual function SYM53C885E ethernet chip
+
+ LK1.1.5 (val@nmt.edu):
+ * Fix forced full-duplex bug I introduced
+
+ LK1.1.6 (val@nmt.edu):
+ * Only print warning on truly "oversized" packets
+ * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
+
+*/
+
+#define DRV_NAME "yellowfin"
+#define DRV_VERSION "1.05+LK1.1.6"
+#define DRV_RELDATE "Feb 11, 2002"
+
+#define PFX DRV_NAME ": "
+
+/* The user-configurable values.
+ These may be modified when a driver module is loaded.*/
+
+static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+static int mtu;
+#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
+/* System-wide count of bogus-rx frames. */
+static int bogus_rx;
+static int dma_ctrl = 0x004A0263; /* Constrained by errata */
+static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
+#elif defined(YF_NEW) /* A future perfect board :->. */
+static int dma_ctrl = 0x00CAC277; /* Override when loading module! */
+static int fifo_cfg = 0x0028;
+#else
+static int dma_ctrl = 0x004A0263; /* Constrained by errata */
+static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
+#endif
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1514 effectively disables this feature. */
+static int rx_copybreak;
+
+/* Used to pass the media type, etc.
+ No media types are currently defined. These exist for driver
+ interoperability.
+*/
+#define MAX_UNITS 8 /* More are supported, limit only on options */
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Do ugly workaround for GX server chipset errata. */
+static int gx_fix;
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for efficiency.
+ Making the Tx ring too long decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE 16
+#define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */
+#define RX_RING_SIZE 64
+#define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words)
+#define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
+#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc)
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+
+#define yellowfin_debug debug
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
+KERN_INFO " http://www.scyld.com/network/yellowfin.html\n"
+KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(max_interrupt_work, int, 0);
+module_param(mtu, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param(gx_fix, int, 0);
+MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
+MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
+MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
+MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
+MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the Packet Engines "Yellowfin" Gigabit
+Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the
+Symbios 53C885E dual function chip.
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS preferably should assign the
+PCI INTA signal to an otherwise unused system IRQ line.
+Note: Kernel versions earlier than 1.3.73 do not support shared PCI
+interrupt lines.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
+This is a descriptor list scheme similar to that used by the EEPro100 and
+Tulip. This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the Yellowfin as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack and replaced by a newly allocated skbuff.
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. For small frames the copying cost is negligible (esp. considering
+that we are pre-loading the cache with immediately useful header
+information). For large frames the copying cost is non-trivial, and the
+larger copy might flush the cache of useful data.
+
+IIIC. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag. The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+The send packet thread has partial control over the Tx ring and 'dev->tbusy'
+flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
+queue slot is empty, it clears the tbusy flag when finished otherwise it sets
+the 'yp->tx_full' flag.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
+clears both the tx_full and tbusy flags.
+
+IV. Notes
+
+Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
+Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
+and an AlphaStation to verifty the Alpha port!
+
+IVb. References
+
+Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
+Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
+ Data Manual v3.0
+http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
+
+IVc. Errata
+
+See Packet Engines confidential appendix (prototype chips only).
+*/
+
+
+
+enum pci_id_flags_bits {
+ /* Set PCI command register bits before calling probe1(). */
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ /* Read and map the single following PCI BAR. */
+ PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
+ PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
+ PCI_UNUSED_IRQ=0x800,
+};
+enum capability_flags {
+ HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
+ HasMACAddrBug=32, /* Only on early revs. */
+ DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
+};
+/* The PCI I/O space extent. */
+#define YELLOWFIN_SIZE 0x100
+#ifdef USE_IO_OPS
+#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO | PCI_ADDR0)
+#else
+#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1)
+#endif
+
+struct pci_id_info {
+ const char *name;
+ struct match_info {
+ int pci, pci_mask, subsystem, subsystem_mask;
+ int revision, revision_mask; /* Only 8 bits. */
+ } id;
+ enum pci_id_flags_bits pci_flags;
+ int io_size; /* Needed for I/O region check or ioremap(). */
+ int drv_flags; /* Driver use, intended as capability flags. */
+};
+
+static struct pci_id_info pci_id_tbl[] = {
+ {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
+ PCI_IOTYPE, YELLOWFIN_SIZE,
+ FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
+ {"Symbios SYM83C885", { 0x07011000, 0xffffffff},
+ PCI_IOTYPE, YELLOWFIN_SIZE, HasMII | DontUseEeprom },
+ {NULL,},
+};
+
+static struct pci_device_id yellowfin_pci_tbl[] = {
+ { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+ { 0, }
+};
+MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
+
+
+/* Offsets to the Yellowfin registers. Various sizes and alignments. */
+enum yellowfin_offsets {
+ TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
+ TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
+ RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
+ RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
+ EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
+ ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
+ Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
+ MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
+ MII_Status=0xAE,
+ RxDepth=0xB8, FlowCtrl=0xBC,
+ AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
+ EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
+ EEFeature=0xF5,
+};
+
+/* The Yellowfin Rx and Tx buffer descriptors.
+ Elements are written as 32 bit for endian portability. */
+struct yellowfin_desc {
+ u32 dbdma_cmd;
+ u32 addr;
+ u32 branch_addr;
+ u32 result_status;
+};
+
+struct tx_status_words {
+#ifdef __BIG_ENDIAN
+ u16 tx_errs;
+ u16 tx_cnt;
+ u16 paused;
+ u16 total_tx_cnt;
+#else /* Little endian chips. */
+ u16 tx_cnt;
+ u16 tx_errs;
+ u16 total_tx_cnt;
+ u16 paused;
+#endif /* __BIG_ENDIAN */
+};
+
+/* Bits in yellowfin_desc.cmd */
+enum desc_cmd_bits {
+ CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
+ CMD_NOP=0x60000000, CMD_STOP=0x70000000,
+ BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
+ BRANCH_IFTRUE=0x040000,
+};
+
+/* Bits in yellowfin_desc.status */
+enum desc_status_bits { RX_EOP=0x0040, };
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+ IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
+ IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
+ IntrEarlyRx=0x100, IntrWakeup=0x200, };
+
+#define PRIV_ALIGN 31 /* Required alignment mask */
+#define MII_CNT 4
+struct yellowfin_private {
+ /* Descriptor rings first for alignment.
+ Tx requires a second descriptor for status. */
+ struct yellowfin_desc *rx_ring;
+ struct yellowfin_desc *tx_ring;
+ struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+
+ struct tx_status_words *tx_status;
+ dma_addr_t tx_status_dma;
+
+ struct timer_list timer; /* Media selection timer. */
+ struct net_device_stats stats;
+ /* Frequently used and paired value: keep adjacent for cache effect. */
+ int chip_id, drv_flags;
+ struct pci_dev *pci_dev;
+ unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
+ unsigned int rx_buf_sz; /* Based on MTU+slack. */
+ struct tx_status_words *tx_tail_desc;
+ unsigned int cur_tx, dirty_tx;
+ int tx_threshold;
+ unsigned int tx_full:1; /* The Tx queue is full. */
+ unsigned int full_duplex:1; /* Full-duplex operation requested. */
+ unsigned int duplex_lock:1;
+ unsigned int medialock:1; /* Do not sense media. */
+ unsigned int default_port:4; /* Last dev->if_port value. */
+ /* MII transceiver section. */
+ int mii_cnt; /* MII device addresses. */
+ u16 advertising; /* NWay media advertisement */
+ unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */
+ spinlock_t lock;
+ void __iomem *base;
+};
+
+static int read_eeprom(void __iomem *ioaddr, int location);
+static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
+static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int yellowfin_open(struct net_device *dev);
+static void yellowfin_timer(unsigned long data);
+static void yellowfin_tx_timeout(struct net_device *dev);
+static void yellowfin_init_ring(struct net_device *dev);
+static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int yellowfin_rx(struct net_device *dev);
+static void yellowfin_error(struct net_device *dev, int intr_status);
+static int yellowfin_close(struct net_device *dev);
+static struct net_device_stats *yellowfin_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static struct ethtool_ops ethtool_ops;
+
+
+static int __devinit yellowfin_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct yellowfin_private *np;
+ int irq;
+ int chip_idx = ent->driver_data;
+ static int find_cnt;
+ void __iomem *ioaddr;
+ int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
+ int drv_flags = pci_id_tbl[chip_idx].drv_flags;
+ void *ring_space;
+ dma_addr_t ring_dma;
+#ifdef USE_IO_OPS
+ int bar = 0;
+#else
+ int bar = 1;
+#endif
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(version);
+#endif
+
+ i = pci_enable_device(pdev);
+ if (i) return i;
+
+ dev = alloc_etherdev(sizeof(*np));
+ if (!dev) {
+ printk (KERN_ERR PFX "cannot allocate ethernet device\n");
+ return -ENOMEM;
+ }
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ np = netdev_priv(dev);
+
+ if (pci_request_regions(pdev, DRV_NAME))
+ goto err_out_free_netdev;
+
+ pci_set_master (pdev);
+
+ ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
+ if (!ioaddr)
+ goto err_out_free_res;
+
+ irq = pdev->irq;
+
+ if (drv_flags & DontUseEeprom)
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
+ else {
+ int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
+ }
+
+ /* Reset the chip. */
+ iowrite32(0x80000000, ioaddr + DMACtrl);
+
+ dev->base_addr = (unsigned long)ioaddr;
+ dev->irq = irq;
+
+ pci_set_drvdata(pdev, dev);
+ spin_lock_init(&np->lock);
+
+ np->pci_dev = pdev;
+ np->chip_id = chip_idx;
+ np->drv_flags = drv_flags;
+ np->base = ioaddr;
+
+ ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
+ if (!ring_space)
+ goto err_out_cleardev;
+ np->tx_ring = (struct yellowfin_desc *)ring_space;
+ np->tx_ring_dma = ring_dma;
+
+ ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
+ if (!ring_space)
+ goto err_out_unmap_tx;
+ np->rx_ring = (struct yellowfin_desc *)ring_space;
+ np->rx_ring_dma = ring_dma;
+
+ ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
+ if (!ring_space)
+ goto err_out_unmap_rx;
+ np->tx_status = (struct tx_status_words *)ring_space;
+ np->tx_status_dma = ring_dma;
+
+ if (dev->mem_start)
+ option = dev->mem_start;
+
+ /* The lower four bits are the media type. */
+ if (option > 0) {
+ if (option & 0x200)
+ np->full_duplex = 1;
+ np->default_port = option & 15;
+ if (np->default_port)
+ np->medialock = 1;
+ }
+ if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
+ np->full_duplex = 1;
+
+ if (np->full_duplex)
+ np->duplex_lock = 1;
+
+ /* The Yellowfin-specific entries in the device structure. */
+ dev->open = &yellowfin_open;
+ dev->hard_start_xmit = &yellowfin_start_xmit;
+ dev->stop = &yellowfin_close;
+ dev->get_stats = &yellowfin_get_stats;
+ dev->set_multicast_list = &set_rx_mode;
+ dev->do_ioctl = &netdev_ioctl;
+ SET_ETHTOOL_OPS(dev, ðtool_ops);
+ dev->tx_timeout = yellowfin_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ if (mtu)
+ dev->mtu = mtu;
+
+ i = register_netdev(dev);
+ if (i)
+ goto err_out_unmap_status;
+
+ printk(KERN_INFO "%s: %s type %8x at %p, ",
+ dev->name, pci_id_tbl[chip_idx].name,
+ ioread32(ioaddr + ChipRev), ioaddr);
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", dev->dev_addr[i]);
+ printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
+
+ if (np->drv_flags & HasMII) {
+ int phy, phy_idx = 0;
+ for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
+ int mii_status = mdio_read(ioaddr, phy, 1);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ np->phys[phy_idx++] = phy;
+ np->advertising = mdio_read(ioaddr, phy, 4);
+ printk(KERN_INFO "%s: MII PHY found at address %d, status "
+ "0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, np->advertising);
+ }
+ }
+ np->mii_cnt = phy_idx;
+ }
+
+ find_cnt++;
+
+ return 0;
+
+err_out_unmap_status:
+ pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
+ np->tx_status_dma);
+err_out_unmap_rx:
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
+err_out_unmap_tx:
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
+err_out_cleardev:
+ pci_set_drvdata(pdev, NULL);
+ pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_free_netdev:
+ free_netdev (dev);
+ return -ENODEV;
+}
+
+static int __devinit read_eeprom(void __iomem *ioaddr, int location)
+{
+ int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */
+
+ iowrite8(location, ioaddr + EEAddr);
+ iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
+ while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0)
+ ;
+ return ioread8(ioaddr + EERead);
+}
+
+/* MII Managemen Data I/O accesses.
+ These routines assume the MDIO controller is idle, and do not exit until
+ the command is finished. */
+
+static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
+{
+ int i;
+
+ iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
+ iowrite16(1, ioaddr + MII_Cmd);
+ for (i = 10000; i >= 0; i--)
+ if ((ioread16(ioaddr + MII_Status) & 1) == 0)
+ break;
+ return ioread16(ioaddr + MII_Rd_Data);
+}
+
+static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
+{
+ int i;
+
+ iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
+ iowrite16(value, ioaddr + MII_Wr_Data);
+
+ /* Wait for the command to finish. */
+ for (i = 10000; i >= 0; i--)
+ if ((ioread16(ioaddr + MII_Status) & 1) == 0)
+ break;
+ return;
+}
+
+
+static int yellowfin_open(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ void __iomem *ioaddr = yp->base;
+ int i;
+
+ /* Reset the chip. */
+ iowrite32(0x80000000, ioaddr + DMACtrl);
+
+ i = request_irq(dev->irq, &yellowfin_interrupt, SA_SHIRQ, dev->name, dev);
+ if (i) return i;
+
+ if (yellowfin_debug > 1)
+ printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
+ dev->name, dev->irq);
+
+ yellowfin_init_ring(dev);
+
+ iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
+ iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
+
+ for (i = 0; i < 6; i++)
+ iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
+
+ /* Set up various condition 'select' registers.
+ There are no options here. */
+ iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */
+ iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */
+ iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */
+ iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */
+ iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */
+ iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */
+
+ /* Initialize other registers: with so many this eventually this will
+ converted to an offset/value list. */
+ iowrite32(dma_ctrl, ioaddr + DMACtrl);
+ iowrite16(fifo_cfg, ioaddr + FIFOcfg);
+ /* Enable automatic generation of flow control frames, period 0xffff. */
+ iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
+
+ yp->tx_threshold = 32;
+ iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
+
+ if (dev->if_port == 0)
+ dev->if_port = yp->default_port;
+
+ netif_start_queue(dev);
+
+ /* Setting the Rx mode will start the Rx process. */
+ if (yp->drv_flags & IsGigabit) {
+ /* We are always in full-duplex mode with gigabit! */
+ yp->full_duplex = 1;
+ iowrite16(0x01CF, ioaddr + Cnfg);
+ } else {
+ iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
+ iowrite16(0x1018, ioaddr + FrameGap1);
+ iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
+ }
+ set_rx_mode(dev);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */
+ iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */
+ iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */
+ iowrite32(0x80008000, ioaddr + TxCtrl);
+
+ if (yellowfin_debug > 2) {
+ printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
+ dev->name);
+ }
+
+ /* Set the timer to check for link beat. */
+ init_timer(&yp->timer);
+ yp->timer.expires = jiffies + 3*HZ;
+ yp->timer.data = (unsigned long)dev;
+ yp->timer.function = &yellowfin_timer; /* timer handler */
+ add_timer(&yp->timer);
+
+ return 0;
+}
+
+static void yellowfin_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct yellowfin_private *yp = netdev_priv(dev);
+ void __iomem *ioaddr = yp->base;
+ int next_tick = 60*HZ;
+
+ if (yellowfin_debug > 3) {
+ printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
+ dev->name, ioread16(ioaddr + IntrStatus));
+ }
+
+ if (yp->mii_cnt) {
+ int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
+ int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
+ int negotiated = lpa & yp->advertising;
+ if (yellowfin_debug > 1)
+ printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
+ "link partner capability %4.4x.\n",
+ dev->name, yp->phys[0], bmsr, lpa);
+
+ yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
+
+ iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
+
+ if (bmsr & BMSR_LSTATUS)
+ next_tick = 60*HZ;
+ else
+ next_tick = 3*HZ;
+ }
+
+ yp->timer.expires = jiffies + next_tick;
+ add_timer(&yp->timer);
+}
+
+static void yellowfin_tx_timeout(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ void __iomem *ioaddr = yp->base;
+
+ printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
+ "status %4.4x, Rx status %4.4x, resetting...\n",
+ dev->name, yp->cur_tx, yp->dirty_tx,
+ ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
+
+ /* Note: these should be KERN_DEBUG. */
+ if (yellowfin_debug) {
+ int i;
+ printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
+ for (i = 0; i < RX_RING_SIZE; i++)
+ printk(" %8.8x", yp->rx_ring[i].result_status);
+ printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
+ yp->tx_ring[i].result_status);
+ printk("\n");
+ }
+
+ /* If the hardware is found to hang regularly, we will update the code
+ to reinitialize the chip here. */
+ dev->if_port = 0;
+
+ /* Wake the potentially-idle transmit channel. */
+ iowrite32(0x10001000, yp->base + TxCtrl);
+ if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
+ netif_wake_queue (dev); /* Typical path */
+
+ dev->trans_start = jiffies;
+ yp->stats.tx_errors++;
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void yellowfin_init_ring(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ int i;
+
+ yp->tx_full = 0;
+ yp->cur_rx = yp->cur_tx = 0;
+ yp->dirty_tx = 0;
+
+ yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ yp->rx_ring[i].dbdma_cmd =
+ cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
+ yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
+ ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
+ }
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+ yp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* 16 byte align the IP header. */
+ yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
+ skb->tail, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
+ }
+ yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+#define NO_TXSTATS
+#ifdef NO_TXSTATS
+ /* In this mode the Tx ring needs only a single descriptor. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ yp->tx_skbuff[i] = NULL;
+ yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
+ ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
+ }
+ /* Wrap ring */
+ yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
+#else
+{
+ int j;
+
+ /* Tx ring needs a pair of descriptors, the second for the status. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ j = 2*i;
+ yp->tx_skbuff[i] = 0;
+ /* Branch on Tx error. */
+ yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
+ (j+1)*sizeof(struct yellowfin_desc);
+ j++;
+ if (yp->flags & FullTxStatus) {
+ yp->tx_ring[j].dbdma_cmd =
+ cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
+ yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
+ yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
+ i*sizeof(struct tx_status_words);
+ } else {
+ /* Symbios chips write only tx_errs word. */
+ yp->tx_ring[j].dbdma_cmd =
+ cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
+ yp->tx_ring[j].request_cnt = 2;
+ /* Om pade ummmmm... */
+ yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
+ i*sizeof(struct tx_status_words) +
+ &(yp->tx_status[0].tx_errs) -
+ &(yp->tx_status[0]));
+ }
+ yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
+ ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
+ }
+ /* Wrap ring */
+ yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
+}
+#endif
+ yp->tx_tail_desc = &yp->tx_status[0];
+ return;
+}
+
+static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ unsigned entry;
+ int len = skb->len;
+
+ netif_stop_queue (dev);
+
+ /* Note: Ordering is important here, set the field with the
+ "ownership" bit last, and only then increment cur_tx. */
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = yp->cur_tx % TX_RING_SIZE;
+
+ if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */
+ int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
+ /* Fix GX chipset errata. */
+ if (cacheline_end > 24 || cacheline_end == 0) {
+ len = skb->len + 32 - cacheline_end + 1;
+ if (len != skb->len)
+ skb = skb_padto(skb, len);
+ }
+ if (skb == NULL) {
+ yp->tx_skbuff[entry] = NULL;
+ netif_wake_queue(dev);
+ return 0;
+ }
+ }
+ yp->tx_skbuff[entry] = skb;
+
+#ifdef NO_TXSTATS
+ yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
+ skb->data, len, PCI_DMA_TODEVICE));
+ yp->tx_ring[entry].result_status = 0;
+ if (entry >= TX_RING_SIZE-1) {
+ /* New stop command. */
+ yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
+ cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
+ } else {
+ yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->tx_ring[entry].dbdma_cmd =
+ cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
+ }
+ yp->cur_tx++;
+#else
+ yp->tx_ring[entry<<1].request_cnt = len;
+ yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
+ skb->data, len, PCI_DMA_TODEVICE));
+ /* The input_last (status-write) command is constant, but we must
+ rewrite the subsequent 'stop' command. */
+
+ yp->cur_tx++;
+ {
+ unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
+ yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ }
+ /* Final step -- overwrite the old 'stop' command. */
+
+ yp->tx_ring[entry<<1].dbdma_cmd =
+ cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
+ CMD_TX_PKT | BRANCH_IFTRUE) | len);
+#endif
+
+ /* Non-x86 Todo: explicitly flush cache lines here. */
+
+ /* Wake the potentially-idle transmit channel. */
+ iowrite32(0x10001000, yp->base + TxCtrl);
+
+ if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
+ netif_start_queue (dev); /* Typical path */
+ else
+ yp->tx_full = 1;
+ dev->trans_start = jiffies;
+
+ if (yellowfin_debug > 4) {
+ printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
+ dev->name, yp->cur_tx, entry);
+ }
+ return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_instance;
+ struct yellowfin_private *yp;
+ void __iomem *ioaddr;
+ int boguscnt = max_interrupt_work;
+ unsigned int handled = 0;
+
+#ifndef final_version /* Can never occur. */
+ if (dev == NULL) {
+ printk (KERN_ERR "yellowfin_interrupt(): irq %d for unknown device.\n", irq);
+ return IRQ_NONE;
+ }
+#endif
+
+ yp = netdev_priv(dev);
+ ioaddr = yp->base;
+
+ spin_lock (&yp->lock);
+
+ do {
+ u16 intr_status = ioread16(ioaddr + IntrClear);
+
+ if (yellowfin_debug > 4)
+ printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
+ dev->name, intr_status);
+
+ if (intr_status == 0)
+ break;
+ handled = 1;
+
+ if (intr_status & (IntrRxDone | IntrEarlyRx)) {
+ yellowfin_rx(dev);
+ iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */
+ }
+
+#ifdef NO_TXSTATS
+ for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
+ int entry = yp->dirty_tx % TX_RING_SIZE;
+ struct sk_buff *skb;
+
+ if (yp->tx_ring[entry].result_status == 0)
+ break;
+ skb = yp->tx_skbuff[entry];
+ yp->stats.tx_packets++;
+ yp->stats.tx_bytes += skb->len;
+ /* Free the original skb. */
+ pci_unmap_single(yp->pci_dev, yp->tx_ring[entry].addr,
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+ yp->tx_skbuff[entry] = NULL;
+ }
+ if (yp->tx_full
+ && yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
+ /* The ring is no longer full, clear tbusy. */
+ yp->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+#else
+ if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
+ unsigned dirty_tx = yp->dirty_tx;
+
+ for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ /* Todo: optimize this. */
+ int entry = dirty_tx % TX_RING_SIZE;
+ u16 tx_errs = yp->tx_status[entry].tx_errs;
+ struct sk_buff *skb;
+
+#ifndef final_version
+ if (yellowfin_debug > 5)
+ printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
+ "%4.4x %4.4x %4.4x %4.4x.\n",
+ dev->name, entry,
+ yp->tx_status[entry].tx_cnt,
+ yp->tx_status[entry].tx_errs,
+ yp->tx_status[entry].total_tx_cnt,
+ yp->tx_status[entry].paused);
+#endif
+ if (tx_errs == 0)
+ break; /* It still hasn't been Txed */
+ skb = yp->tx_skbuff[entry];
+ if (tx_errs & 0xF810) {
+ /* There was an major error, log it. */
+#ifndef final_version
+ if (yellowfin_debug > 1)
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
+ dev->name, tx_errs);
+#endif
+ yp->stats.tx_errors++;
+ if (tx_errs & 0xF800) yp->stats.tx_aborted_errors++;
+ if (tx_errs & 0x0800) yp->stats.tx_carrier_errors++;
+ if (tx_errs & 0x2000) yp->stats.tx_window_errors++;
+ if (tx_errs & 0x8000) yp->stats.tx_fifo_errors++;
+ } else {
+#ifndef final_version
+ if (yellowfin_debug > 4)
+ printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
+ dev->name, tx_errs);
+#endif
+ yp->stats.tx_bytes += skb->len;
+ yp->stats.collisions += tx_errs & 15;
+ yp->stats.tx_packets++;
+ }
+ /* Free the original skb. */
+ pci_unmap_single(yp->pci_dev,
+ yp->tx_ring[entry<<1].addr, skb->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+ yp->tx_skbuff[entry] = 0;
+ /* Mark status as empty. */
+ yp->tx_status[entry].tx_errs = 0;
+ }
+
+#ifndef final_version
+ if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
+ printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
+ dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
+ dirty_tx += TX_RING_SIZE;
+ }
+#endif
+
+ if (yp->tx_full
+ && yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
+ /* The ring is no longer full, clear tbusy. */
+ yp->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+
+ yp->dirty_tx = dirty_tx;
+ yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
+ }
+#endif
+
+ /* Log errors and other uncommon events. */
+ if (intr_status & 0x2ee) /* Abnormal error summary. */
+ yellowfin_error(dev, intr_status);
+
+ if (--boguscnt < 0) {
+ printk(KERN_WARNING "%s: Too much work at interrupt, "
+ "status=0x%4.4x.\n",
+ dev->name, intr_status);
+ break;
+ }
+ } while (1);
+
+ if (yellowfin_debug > 3)
+ printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
+ dev->name, ioread16(ioaddr + IntrStatus));
+
+ spin_unlock (&yp->lock);
+ return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+ for clarity and better register allocation. */
+static int yellowfin_rx(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ int entry = yp->cur_rx % RX_RING_SIZE;
+ int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
+
+ if (yellowfin_debug > 4) {
+ printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
+ entry, yp->rx_ring[entry].result_status);
+ printk(KERN_DEBUG " #%d desc. %8.8x %8.8x %8.8x.\n",
+ entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
+ yp->rx_ring[entry].result_status);
+ }
+
+ /* If EOP is set on the next entry, it's a new packet. Send it up. */
+ while (1) {
+ struct yellowfin_desc *desc = &yp->rx_ring[entry];
+ struct sk_buff *rx_skb = yp->rx_skbuff[entry];
+ s16 frame_status;
+ u16 desc_status;
+ int data_size;
+ u8 *buf_addr;
+
+ if(!desc->result_status)
+ break;
+ pci_dma_sync_single_for_cpu(yp->pci_dev, desc->addr,
+ yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ desc_status = le32_to_cpu(desc->result_status) >> 16;
+ buf_addr = rx_skb->tail;
+ data_size = (le32_to_cpu(desc->dbdma_cmd) -
+ le32_to_cpu(desc->result_status)) & 0xffff;
+ frame_status = le16_to_cpu(get_unaligned((s16*)&(buf_addr[data_size - 2])));
+ if (yellowfin_debug > 4)
+ printk(KERN_DEBUG " yellowfin_rx() status was %4.4x.\n",
+ frame_status);
+ if (--boguscnt < 0)
+ break;
+ if ( ! (desc_status & RX_EOP)) {
+ if (data_size != 0)
+ printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
+ " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
+ yp->stats.rx_length_errors++;
+ } else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) {
+ /* There was a error. */
+ if (yellowfin_debug > 3)
+ printk(KERN_DEBUG " yellowfin_rx() Rx error was %4.4x.\n",
+ frame_status);
+ yp->stats.rx_errors++;
+ if (frame_status & 0x0060) yp->stats.rx_length_errors++;
+ if (frame_status & 0x0008) yp->stats.rx_frame_errors++;
+ if (frame_status & 0x0010) yp->stats.rx_crc_errors++;
+ if (frame_status < 0) yp->stats.rx_dropped++;
+ } else if ( !(yp->drv_flags & IsGigabit) &&
+ ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
+ u8 status1 = buf_addr[data_size-2];
+ u8 status2 = buf_addr[data_size-1];
+ yp->stats.rx_errors++;
+ if (status1 & 0xC0) yp->stats.rx_length_errors++;
+ if (status2 & 0x03) yp->stats.rx_frame_errors++;
+ if (status2 & 0x04) yp->stats.rx_crc_errors++;
+ if (status2 & 0x80) yp->stats.rx_dropped++;
+#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
+ } else if ((yp->flags & HasMACAddrBug) &&
+ memcmp(le32_to_cpu(yp->rx_ring_dma +
+ entry*sizeof(struct yellowfin_desc)),
+ dev->dev_addr, 6) != 0 &&
+ memcmp(le32_to_cpu(yp->rx_ring_dma +
+ entry*sizeof(struct yellowfin_desc)),
+ "\377\377\377\377\377\377", 6) != 0) {
+ if (bogus_rx++ == 0)
+ printk(KERN_WARNING "%s: Bad frame to %2.2x:%2.2x:%2.2x:%2.2x:"
+ "%2.2x:%2.2x.\n",
+ dev->name, buf_addr[0], buf_addr[1], buf_addr[2],
+ buf_addr[3], buf_addr[4], buf_addr[5]);
+#endif
+ } else {
+ struct sk_buff *skb;
+ int pkt_len = data_size -
+ (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
+ /* To verify: Yellowfin Length should omit the CRC! */
+
+#ifndef final_version
+ if (yellowfin_debug > 4)
+ printk(KERN_DEBUG " yellowfin_rx() normal Rx pkt length %d"
+ " of %d, bogus_cnt %d.\n",
+ pkt_len, data_size, boguscnt);
+#endif
+ /* Check if the packet is long enough to just pass up the skbuff
+ without copying to a properly sized skbuff. */
+ if (pkt_len > rx_copybreak) {
+ skb_put(skb = rx_skb, pkt_len);
+ pci_unmap_single(yp->pci_dev,
+ yp->rx_ring[entry].addr,
+ yp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ yp->rx_skbuff[entry] = NULL;
+ } else {
+ skb = dev_alloc_skb(pkt_len + 2);
+ if (skb == NULL)
+ break;
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+ eth_copy_and_sum(skb, rx_skb->tail, pkt_len, 0);
+ skb_put(skb, pkt_len);
+ pci_dma_sync_single_for_device(yp->pci_dev, desc->addr,
+ yp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ yp->stats.rx_packets++;
+ yp->stats.rx_bytes += pkt_len;
+ }
+ entry = (++yp->cur_rx) % RX_RING_SIZE;
+ }
+
+ /* Refill the Rx ring buffers. */
+ for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
+ entry = yp->dirty_rx % RX_RING_SIZE;
+ if (yp->rx_skbuff[entry] == NULL) {
+ struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+ if (skb == NULL)
+ break; /* Better luck next round. */
+ yp->rx_skbuff[entry] = skb;
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
+ skb->tail, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
+ }
+ yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */
+ if (entry != 0)
+ yp->rx_ring[entry - 1].dbdma_cmd =
+ cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
+ else
+ yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
+ cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
+ | yp->rx_buf_sz);
+ }
+
+ return 0;
+}
+
+static void yellowfin_error(struct net_device *dev, int intr_status)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+
+ printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
+ dev->name, intr_status);
+ /* Hmmmmm, it's not clear what to do here. */
+ if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
+ yp->stats.tx_errors++;
+ if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
+ yp->stats.rx_errors++;
+}
+
+static int yellowfin_close(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ void __iomem *ioaddr = yp->base;
+ int i;
+
+ netif_stop_queue (dev);
+
+ if (yellowfin_debug > 1) {
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
+ "Rx %4.4x Int %2.2x.\n",
+ dev->name, ioread16(ioaddr + TxStatus),
+ ioread16(ioaddr + RxStatus),
+ ioread16(ioaddr + IntrStatus));
+ printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
+ dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
+ }
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite16(0x0000, ioaddr + IntrEnb);
+
+ /* Stop the chip's Tx and Rx processes. */
+ iowrite32(0x80000000, ioaddr + RxCtrl);
+ iowrite32(0x80000000, ioaddr + TxCtrl);
+
+ del_timer(&yp->timer);
+
+#if defined(__i386__)
+ if (yellowfin_debug > 2) {
+ printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n",
+ (unsigned long long)yp->tx_ring_dma);
+ for (i = 0; i < TX_RING_SIZE*2; i++)
+ printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+ ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
+ i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
+ yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
+ printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+ i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
+ yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
+
+ printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n",
+ (unsigned long long)yp->rx_ring_dma);
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
+ ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
+ i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
+ yp->rx_ring[i].result_status);
+ if (yellowfin_debug > 6) {
+ if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
+ int j;
+ for (j = 0; j < 0x50; j++)
+ printk(" %4.4x",
+ get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
+ printk("\n");
+ }
+ }
+ }
+ }
+#endif /* __i386__ debugging only */
+
+ free_irq(dev->irq, dev);
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
+ yp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */
+ if (yp->rx_skbuff[i]) {
+ dev_kfree_skb(yp->rx_skbuff[i]);
+ }
+ yp->rx_skbuff[i] = NULL;
+ }
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ if (yp->tx_skbuff[i])
+ dev_kfree_skb(yp->tx_skbuff[i]);
+ yp->tx_skbuff[i] = NULL;
+ }
+
+#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
+ if (yellowfin_debug > 0) {
+ printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
+ dev->name, bogus_rx);
+ }
+#endif
+
+ return 0;
+}
+
+static struct net_device_stats *yellowfin_get_stats(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ return &yp->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor. */
+
+static void set_rx_mode(struct net_device *dev)
+{
+ struct yellowfin_private *yp = netdev_priv(dev);
+ void __iomem *ioaddr = yp->base;
+ u16 cfg_value = ioread16(ioaddr + Cnfg);
+
+ /* Stop the Rx process to change any value. */
+ iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ /* Unconditionally log net taps. */
+ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
+ iowrite16(0x000F, ioaddr + AddrMode);
+ } else if ((dev->mc_count > 64) || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter well, or accept all multicasts. */
+ iowrite16(0x000B, ioaddr + AddrMode);
+ } else if (dev->mc_count > 0) { /* Must use the multicast hash table. */
+ struct dev_mc_list *mclist;
+ u16 hash_table[4];
+ int i;
+ memset(hash_table, 0, sizeof(hash_table));
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ unsigned int bit;
+
+ /* Due to a bug in the early chip versions, multiple filter
+ slots must be set for each address. */
+ if (yp->drv_flags & HasMulticastBug) {
+ bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f;
+ hash_table[bit >> 4] |= (1 << bit);
+ bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f;
+ hash_table[bit >> 4] |= (1 << bit);
+ bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f;
+ hash_table[bit >> 4] |= (1 << bit);
+ }
+ bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f;
+ hash_table[bit >> 4] |= (1 << bit);
+ }
+ /* Copy the hash table to the chip. */
+ for (i = 0; i < 4; i++)
+ iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
+ iowrite16(0x0003, ioaddr + AddrMode);
+ } else { /* Normal, unicast/broadcast-only mode. */
+ iowrite16(0x0001, ioaddr + AddrMode);
+ }
+ /* Restart the Rx process. */
+ iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
+}
+
+static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct yellowfin_private *np = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(np->pci_dev));
+}
+
+static struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = yellowfin_get_drvinfo
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct yellowfin_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ struct mii_ioctl_data *data = if_mii(rq);
+
+ switch(cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ data->phy_id = np->phys[0] & 0x1f;
+ /* Fall Through */
+
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
+ return 0;
+
+ case SIOCSMIIREG: /* Write MII PHY register. */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (data->phy_id == np->phys[0]) {
+ u16 value = data->val_in;
+ switch (data->reg_num) {
+ case 0:
+ /* Check for autonegotiation on or reset. */
+ np->medialock = (value & 0x9000) ? 0 : 1;
+ if (np->medialock)
+ np->full_duplex = (value & 0x0100) ? 1 : 0;
+ break;
+ case 4: np->advertising = value; break;
+ }
+ /* Perhaps check_duplex(dev), depending on chip semantics. */
+ }
+ mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+
+static void __devexit yellowfin_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct yellowfin_private *np;
+
+ if (!dev)
+ BUG();
+ np = netdev_priv(dev);
+
+ pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
+ np->tx_status_dma);
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
+ unregister_netdev (dev);
+
+ pci_iounmap(pdev, np->base);
+
+ pci_release_regions (pdev);
+
+ free_netdev (dev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+
+static struct pci_driver yellowfin_driver = {
+ .name = DRV_NAME,
+ .id_table = yellowfin_pci_tbl,
+ .probe = yellowfin_init_one,
+ .remove = __devexit_p(yellowfin_remove_one),
+};
+
+
+static int __init yellowfin_init (void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init (&yellowfin_driver);
+}
+
+
+static void __exit yellowfin_cleanup (void)
+{
+ pci_unregister_driver (&yellowfin_driver);
+}
+
+
+module_init(yellowfin_init);
+module_exit(yellowfin_cleanup);
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c yellowfin.c"
+ * compile-command-alphaLX: "gcc -DMODULE -Wall -Wstrict-prototypes -O2 -c yellowfin.c -fomit-frame-pointer -fno-strength-reduce -mno-fp-regs -Wa,-m21164a -DBWX_USABLE -DBWIO_ENABLED"
+ * simple-compile-command: "gcc -DMODULE -O6 -c yellowfin.c"
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */