Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
new file mode 100644
index 0000000..3052869
--- /dev/null
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -0,0 +1,790 @@
+/*
+ *
+ * Linux MegaRAID Unified device driver
+ *
+ * Copyright (c) 2003-2004 LSI Logic Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * FILE : mbox_defs.h
+ *
+ */
+#ifndef _MRAID_MBOX_DEFS_H_
+#define _MRAID_MBOX_DEFS_H_
+
+#include <linux/types.h>
+
+/*
+ * Commands and states for mailbox based controllers
+ */
+
+#define MBOXCMD_LREAD 0x01
+#define MBOXCMD_LWRITE 0x02
+#define MBOXCMD_PASSTHRU 0x03
+#define MBOXCMD_ADPEXTINQ 0x04
+#define MBOXCMD_ADAPTERINQ 0x05
+#define MBOXCMD_LREAD64 0xA7
+#define MBOXCMD_LWRITE64 0xA8
+#define MBOXCMD_PASSTHRU64 0xC3
+#define MBOXCMD_EXTPTHRU 0xE3
+
+#define MAIN_MISC_OPCODE 0xA4
+#define GET_MAX_SG_SUPPORT 0x01
+#define SUPPORT_EXT_CDB 0x16
+
+#define FC_NEW_CONFIG 0xA1
+#define NC_SUBOP_PRODUCT_INFO 0x0E
+#define NC_SUBOP_ENQUIRY3 0x0F
+#define ENQ3_GET_SOLICITED_FULL 0x02
+#define OP_DCMD_READ_CONFIG 0x04
+#define NEW_READ_CONFIG_8LD 0x67
+#define READ_CONFIG_8LD 0x07
+#define FLUSH_ADAPTER 0x0A
+#define FLUSH_SYSTEM 0xFE
+
+/*
+ * Command for random deletion of logical drives
+ */
+#define FC_DEL_LOGDRV 0xA4
+#define OP_SUP_DEL_LOGDRV 0x2A
+#define OP_GET_LDID_MAP 0x18
+#define OP_DEL_LOGDRV 0x1C
+
+/*
+ * BIOS commands
+ */
+#define IS_BIOS_ENABLED 0x62
+#define GET_BIOS 0x01
+#define CHNL_CLASS 0xA9
+#define GET_CHNL_CLASS 0x00
+#define SET_CHNL_CLASS 0x01
+#define CH_RAID 0x01
+#define CH_SCSI 0x00
+#define BIOS_PVT_DATA 0x40
+#define GET_BIOS_PVT_DATA 0x00
+
+
+/*
+ * Commands to support clustering
+ */
+#define GET_TARGET_ID 0x7D
+#define CLUSTER_OP 0x70
+#define GET_CLUSTER_MODE 0x02
+#define CLUSTER_CMD 0x6E
+#define RESERVE_LD 0x01
+#define RELEASE_LD 0x02
+#define RESET_RESERVATIONS 0x03
+#define RESERVATION_STATUS 0x04
+#define RESERVE_PD 0x05
+#define RELEASE_PD 0x06
+
+
+/*
+ * Module battery status
+ */
+#define BATTERY_MODULE_MISSING 0x01
+#define BATTERY_LOW_VOLTAGE 0x02
+#define BATTERY_TEMP_HIGH 0x04
+#define BATTERY_PACK_MISSING 0x08
+#define BATTERY_CHARGE_MASK 0x30
+#define BATTERY_CHARGE_DONE 0x00
+#define BATTERY_CHARGE_INPROG 0x10
+#define BATTERY_CHARGE_FAIL 0x20
+#define BATTERY_CYCLES_EXCEEDED 0x40
+
+/*
+ * Physical drive states.
+ */
+#define PDRV_UNCNF 0
+#define PDRV_ONLINE 3
+#define PDRV_FAILED 4
+#define PDRV_RBLD 5
+#define PDRV_HOTSPARE 6
+
+
+/*
+ * Raid logical drive states.
+ */
+#define RDRV_OFFLINE 0
+#define RDRV_DEGRADED 1
+#define RDRV_OPTIMAL 2
+#define RDRV_DELETED 3
+
+/*
+ * Read, write and cache policies
+ */
+#define NO_READ_AHEAD 0
+#define READ_AHEAD 1
+#define ADAP_READ_AHEAD 2
+#define WRMODE_WRITE_THRU 0
+#define WRMODE_WRITE_BACK 1
+#define CACHED_IO 0
+#define DIRECT_IO 1
+
+#define MAX_LOGICAL_DRIVES_8LD 8
+#define MAX_LOGICAL_DRIVES_40LD 40
+#define FC_MAX_PHYSICAL_DEVICES 256
+#define MAX_MBOX_CHANNELS 5
+#define MAX_MBOX_TARGET 15
+#define MBOX_MAX_PHYSICAL_DRIVES MAX_MBOX_CHANNELS*MAX_MBOX_TARGET
+#define MAX_ROW_SIZE_40LD 32
+#define MAX_ROW_SIZE_8LD 8
+#define SPAN_DEPTH_8_SPANS 8
+#define SPAN_DEPTH_4_SPANS 4
+#define MAX_REQ_SENSE_LEN 0x20
+
+
+
+/**
+ * struct mbox_t - Driver and f/w handshake structure.
+ * @cmd : firmware command
+ * @cmdid : command id
+ * @numsectors : number of sectors to be transferred
+ * @lba : Logical Block Address on LD
+ * @xferaddr : DMA address for data transfer
+ * @logdrv : logical drive number
+ * @numsge : number of scatter gather elements in sg list
+ * @resvd : reserved
+ * @busy : f/w busy, must wait to issue more commands.
+ * @numstatus : number of commands completed.
+ * @status : status of the commands completed
+ * @completed : array of completed command ids.
+ * @poll : poll and ack sequence
+ * @ack : poll and ack sequence
+ *
+ * The central handshake structure between the driver and the firmware. This
+ * structure must be allocated by the driver and aligned at 8-byte boundary.
+ */
+#define MBOX_MAX_FIRMWARE_STATUS 46
+typedef struct {
+ uint8_t cmd;
+ uint8_t cmdid;
+ uint16_t numsectors;
+ uint32_t lba;
+ uint32_t xferaddr;
+ uint8_t logdrv;
+ uint8_t numsge;
+ uint8_t resvd;
+ uint8_t busy;
+ uint8_t numstatus;
+ uint8_t status;
+ uint8_t completed[MBOX_MAX_FIRMWARE_STATUS];
+ uint8_t poll;
+ uint8_t ack;
+} __attribute__ ((packed)) mbox_t;
+
+
+/**
+ * mbox64_t - 64-bit extension for the mailbox
+ * @segment_lo : the low 32-bits of the address of the scatter-gather list
+ * @segment_hi : the upper 32-bits of the address of the scatter-gather list
+ * @mbox : 32-bit mailbox, whose xferadder field must be set to
+ * 0xFFFFFFFF
+ *
+ * This is the extension of the 32-bit mailbox to be able to perform DMA
+ * beyond 4GB address range.
+ */
+typedef struct {
+ uint32_t xferaddr_lo;
+ uint32_t xferaddr_hi;
+ mbox_t mbox32;
+} __attribute__ ((packed)) mbox64_t;
+
+/*
+ * mailbox structure used for internal commands
+ */
+typedef struct {
+ u8 cmd;
+ u8 cmdid;
+ u8 opcode;
+ u8 subopcode;
+ u32 lba;
+ u32 xferaddr;
+ u8 logdrv;
+ u8 rsvd[3];
+ u8 numstatus;
+ u8 status;
+} __attribute__ ((packed)) int_mbox_t;
+
+/**
+ * mraid_passthru_t - passthru structure to issue commands to physical devices
+ * @timeout : command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr
+ * @ars : set if ARS required after check condition
+ * @islogical : set if command meant for logical devices
+ * @logdrv : logical drive number if command for LD
+ * @channel : Channel on which physical device is located
+ * @target : SCSI target of the device
+ * @queuetag : unused
+ * @queueaction : unused
+ * @cdb : SCSI CDB
+ * @cdblen : length of the CDB
+ * @reqsenselen : amount of request sense data to be returned
+ * @reqsensearea : Sense information buffer
+ * @numsge : number of scatter-gather elements in the sg list
+ * @scsistatus : SCSI status of the command completed.
+ * @dataxferaddr : DMA data transfer address
+ * @dataxferlen : amount of the data to be transferred.
+ */
+typedef struct {
+ uint8_t timeout :3;
+ uint8_t ars :1;
+ uint8_t reserved :3;
+ uint8_t islogical :1;
+ uint8_t logdrv;
+ uint8_t channel;
+ uint8_t target;
+ uint8_t queuetag;
+ uint8_t queueaction;
+ uint8_t cdb[10];
+ uint8_t cdblen;
+ uint8_t reqsenselen;
+ uint8_t reqsensearea[MAX_REQ_SENSE_LEN];
+ uint8_t numsge;
+ uint8_t scsistatus;
+ uint32_t dataxferaddr;
+ uint32_t dataxferlen;
+} __attribute__ ((packed)) mraid_passthru_t;
+
+typedef struct {
+
+ uint32_t dataxferaddr_lo;
+ uint32_t dataxferaddr_hi;
+ mraid_passthru_t pthru32;
+
+} __attribute__ ((packed)) mega_passthru64_t;
+
+/**
+ * mraid_epassthru_t - passthru structure to issue commands to physical devices
+ * @timeout : command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr
+ * @ars : set if ARS required after check condition
+ * @rsvd1 : reserved field
+ * @cd_rom : (?)
+ * @rsvd2 : reserved field
+ * @islogical : set if command meant for logical devices
+ * @logdrv : logical drive number if command for LD
+ * @channel : Channel on which physical device is located
+ * @target : SCSI target of the device
+ * @queuetag : unused
+ * @queueaction : unused
+ * @cdblen : length of the CDB
+ * @rsvd3 : reserved field
+ * @cdb : SCSI CDB
+ * @numsge : number of scatter-gather elements in the sg list
+ * @status : SCSI status of the command completed.
+ * @reqsenselen : amount of request sense data to be returned
+ * @reqsensearea : Sense information buffer
+ * @rsvd4 : reserved field
+ * @dataxferaddr : DMA data transfer address
+ * @dataxferlen : amount of the data to be transferred.
+ */
+typedef struct {
+ uint8_t timeout :3;
+ uint8_t ars :1;
+ uint8_t rsvd1 :1;
+ uint8_t cd_rom :1;
+ uint8_t rsvd2 :1;
+ uint8_t islogical :1;
+ uint8_t logdrv;
+ uint8_t channel;
+ uint8_t target;
+ uint8_t queuetag;
+ uint8_t queueaction;
+ uint8_t cdblen;
+ uint8_t rsvd3;
+ uint8_t cdb[16];
+ uint8_t numsge;
+ uint8_t status;
+ uint8_t reqsenselen;
+ uint8_t reqsensearea[MAX_REQ_SENSE_LEN];
+ uint8_t rsvd4;
+ uint32_t dataxferaddr;
+ uint32_t dataxferlen;
+} __attribute__ ((packed)) mraid_epassthru_t;
+
+
+/**
+ * mraid_pinfo_t - product info, static information about the controller
+ * @data_size : current size in bytes (not including resvd)
+ * @config_signature : Current value is 0x00282008
+ * @fw_version : Firmware version
+ * @bios_version : version of the BIOS
+ * @product_name : Name given to the controller
+ * @max_commands : Maximum concurrent commands supported
+ * @nchannels : Number of SCSI Channels detected
+ * @fc_loop_present : Number of Fibre Loops detected
+ * @mem_type : EDO, FPM, SDRAM etc
+ * @signature :
+ * @dram_size : In terms of MB
+ * @subsysid : device PCI subsystem ID
+ * @subsysvid : device PCI subsystem vendor ID
+ * @notify_counters :
+ * @pad1k : 135 + 889 resvd = 1024 total size
+ *
+ * This structures holds the information about the controller which is not
+ * expected to change dynamically.
+ *
+ * The current value of config signature is 0x00282008:
+ * 0x28 = MAX_LOGICAL_DRIVES,
+ * 0x20 = Number of stripes and
+ * 0x08 = Number of spans
+ */
+typedef struct {
+ uint32_t data_size;
+ uint32_t config_signature;
+ uint8_t fw_version[16];
+ uint8_t bios_version[16];
+ uint8_t product_name[80];
+ uint8_t max_commands;
+ uint8_t nchannels;
+ uint8_t fc_loop_present;
+ uint8_t mem_type;
+ uint32_t signature;
+ uint16_t dram_size;
+ uint16_t subsysid;
+ uint16_t subsysvid;
+ uint8_t notify_counters;
+ uint8_t pad1k[889];
+} __attribute__ ((packed)) mraid_pinfo_t;
+
+
+/**
+ * mraid_notify_t - the notification structure
+ * @global_counter : Any change increments this counter
+ * @param_counter : Indicates any params changed
+ * @param_id : Param modified - defined below
+ * @param_val : New val of last param modified
+ * @write_config_counter : write config occurred
+ * @write_config_rsvd :
+ * @ldrv_op_counter : Indicates ldrv op started/completed
+ * @ldrv_opid : ldrv num
+ * @ldrv_opcmd : ldrv operation - defined below
+ * @ldrv_opstatus : status of the operation
+ * @ldrv_state_counter : Indicates change of ldrv state
+ * @ldrv_state_id : ldrv num
+ * @ldrv_state_new : New state
+ * @ldrv_state_old : old state
+ * @pdrv_state_counter : Indicates change of ldrv state
+ * @pdrv_state_id : pdrv id
+ * @pdrv_state_new : New state
+ * @pdrv_state_old : old state
+ * @pdrv_fmt_counter : Indicates pdrv format started/over
+ * @pdrv_fmt_id : pdrv id
+ * @pdrv_fmt_val : format started/over
+ * @pdrv_fmt_rsvd :
+ * @targ_xfer_counter : Indicates SCSI-2 Xfer rate change
+ * @targ_xfer_id : pdrv Id
+ * @targ_xfer_val : new Xfer params of last pdrv
+ * @targ_xfer_rsvd :
+ * @fcloop_id_chg_counter : Indicates loopid changed
+ * @fcloopid_pdrvid : pdrv id
+ * @fcloop_id0 : loopid on fc loop 0
+ * @fcloop_id1 : loopid on fc loop 1
+ * @fcloop_state_counter : Indicates loop state changed
+ * @fcloop_state0 : state of fc loop 0
+ * @fcloop_state1 : state of fc loop 1
+ * @fcloop_state_rsvd :
+ */
+typedef struct {
+ uint32_t global_counter;
+ uint8_t param_counter;
+ uint8_t param_id;
+ uint16_t param_val;
+ uint8_t write_config_counter;
+ uint8_t write_config_rsvd[3];
+ uint8_t ldrv_op_counter;
+ uint8_t ldrv_opid;
+ uint8_t ldrv_opcmd;
+ uint8_t ldrv_opstatus;
+ uint8_t ldrv_state_counter;
+ uint8_t ldrv_state_id;
+ uint8_t ldrv_state_new;
+ uint8_t ldrv_state_old;
+ uint8_t pdrv_state_counter;
+ uint8_t pdrv_state_id;
+ uint8_t pdrv_state_new;
+ uint8_t pdrv_state_old;
+ uint8_t pdrv_fmt_counter;
+ uint8_t pdrv_fmt_id;
+ uint8_t pdrv_fmt_val;
+ uint8_t pdrv_fmt_rsvd;
+ uint8_t targ_xfer_counter;
+ uint8_t targ_xfer_id;
+ uint8_t targ_xfer_val;
+ uint8_t targ_xfer_rsvd;
+ uint8_t fcloop_id_chg_counter;
+ uint8_t fcloopid_pdrvid;
+ uint8_t fcloop_id0;
+ uint8_t fcloop_id1;
+ uint8_t fcloop_state_counter;
+ uint8_t fcloop_state0;
+ uint8_t fcloop_state1;
+ uint8_t fcloop_state_rsvd;
+} __attribute__ ((packed)) mraid_notify_t;
+
+
+/**
+ * mraid_inquiry3_t - enquiry for device information
+ *
+ * @data_size : current size in bytes (not including resvd)
+ * @notify :
+ * @notify_rsvd :
+ * @rebuild_rate : rebuild rate (0% - 100%)
+ * @cache_flush_int : cache flush interval in seconds
+ * @sense_alert :
+ * @drive_insert_count : drive insertion count
+ * @battery_status :
+ * @num_ldrv : no. of Log Drives configured
+ * @recon_state : state of reconstruct
+ * @ldrv_op_status : logdrv Status
+ * @ldrv_size : size of each log drv
+ * @ldrv_prop :
+ * @ldrv_state : state of log drives
+ * @pdrv_state : state of phys drvs.
+ * @pdrv_format :
+ * @targ_xfer : phys device transfer rate
+ * @pad1k : 761 + 263reserved = 1024 bytes total size
+ */
+#define MAX_NOTIFY_SIZE 0x80
+#define CUR_NOTIFY_SIZE sizeof(mraid_notify_t)
+
+typedef struct {
+ uint32_t data_size;
+
+ mraid_notify_t notify;
+
+ uint8_t notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
+
+ uint8_t rebuild_rate;
+ uint8_t cache_flush_int;
+ uint8_t sense_alert;
+ uint8_t drive_insert_count;
+
+ uint8_t battery_status;
+ uint8_t num_ldrv;
+ uint8_t recon_state[MAX_LOGICAL_DRIVES_40LD / 8];
+ uint16_t ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8];
+
+ uint32_t ldrv_size[MAX_LOGICAL_DRIVES_40LD];
+ uint8_t ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
+ uint8_t ldrv_state[MAX_LOGICAL_DRIVES_40LD];
+ uint8_t pdrv_state[FC_MAX_PHYSICAL_DEVICES];
+ uint16_t pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
+
+ uint8_t targ_xfer[80];
+ uint8_t pad1k[263];
+} __attribute__ ((packed)) mraid_inquiry3_t;
+
+
+/**
+ * mraid_adapinfo_t - information about the adapter
+ * @max_commands : max concurrent commands supported
+ * @rebuild_rate : rebuild rate - 0% thru 100%
+ * @max_targ_per_chan : max targ per channel
+ * @nchannels : number of channels on HBA
+ * @fw_version : firmware version
+ * @age_of_flash : number of times FW has been flashed
+ * @chip_set_value : contents of 0xC0000832
+ * @dram_size : in MB
+ * @cache_flush_interval : in seconds
+ * @bios_version :
+ * @board_type :
+ * @sense_alert :
+ * @write_config_count : increase with every configuration change
+ * @drive_inserted_count : increase with every drive inserted
+ * @inserted_drive : channel:Id of inserted drive
+ * @battery_status : bit 0: battery module missing
+ * bit 1: VBAD
+ * bit 2: temprature high
+ * bit 3: battery pack missing
+ * bit 4,5:
+ * 00 - charge complete
+ * 01 - fast charge in progress
+ * 10 - fast charge fail
+ * 11 - undefined
+ * bit 6: counter > 1000
+ * bit 7: Undefined
+ * @dec_fault_bus_info :
+ */
+typedef struct {
+ uint8_t max_commands;
+ uint8_t rebuild_rate;
+ uint8_t max_targ_per_chan;
+ uint8_t nchannels;
+ uint8_t fw_version[4];
+ uint16_t age_of_flash;
+ uint8_t chip_set_value;
+ uint8_t dram_size;
+ uint8_t cache_flush_interval;
+ uint8_t bios_version[4];
+ uint8_t board_type;
+ uint8_t sense_alert;
+ uint8_t write_config_count;
+ uint8_t battery_status;
+ uint8_t dec_fault_bus_info;
+} __attribute__ ((packed)) mraid_adapinfo_t;
+
+
+/**
+ * mraid_ldrv_info_t - information about the logical drives
+ * @nldrv : Number of logical drives configured
+ * @rsvd :
+ * @size : size of each logical drive
+ * @prop :
+ * @state : state of each logical drive
+ */
+typedef struct {
+ uint8_t nldrv;
+ uint8_t rsvd[3];
+ uint32_t size[MAX_LOGICAL_DRIVES_8LD];
+ uint8_t prop[MAX_LOGICAL_DRIVES_8LD];
+ uint8_t state[MAX_LOGICAL_DRIVES_8LD];
+} __attribute__ ((packed)) mraid_ldrv_info_t;
+
+
+/**
+ * mraid_pdrv_info_t - information about the physical drives
+ * @pdrv_state : state of each physical drive
+ */
+typedef struct {
+ uint8_t pdrv_state[MBOX_MAX_PHYSICAL_DRIVES];
+ uint8_t rsvd;
+} __attribute__ ((packed)) mraid_pdrv_info_t;
+
+
+/**
+ * mraid_inquiry_t - RAID inquiry, mailbox command 0x05
+ * @mraid_adapinfo_t : adapter information
+ * @mraid_ldrv_info_t : logical drives information
+ * @mraid_pdrv_info_t : physical drives information
+ */
+typedef struct {
+ mraid_adapinfo_t adapter_info;
+ mraid_ldrv_info_t logdrv_info;
+ mraid_pdrv_info_t pdrv_info;
+} __attribute__ ((packed)) mraid_inquiry_t;
+
+
+/**
+ * mraid_extinq_t - RAID extended inquiry, mailbox command 0x04
+ *
+ * @raid_inq : raid inquiry
+ * @phys_drv_format :
+ * @stack_attn :
+ * @modem_status :
+ * @rsvd :
+ */
+typedef struct {
+ mraid_inquiry_t raid_inq;
+ uint16_t phys_drv_format[MAX_MBOX_CHANNELS];
+ uint8_t stack_attn;
+ uint8_t modem_status;
+ uint8_t rsvd[2];
+} __attribute__ ((packed)) mraid_extinq_t;
+
+
+/**
+ * adap_device_t - device information
+ * @channel : channel fpor the device
+ * @target : target ID of the device
+ */
+typedef struct {
+ uint8_t channel;
+ uint8_t target;
+}__attribute__ ((packed)) adap_device_t;
+
+
+/**
+ * adap_span_40ld_t - 40LD span
+ * @start_blk : starting block
+ * @num_blks : number of blocks
+ */
+typedef struct {
+ uint32_t start_blk;
+ uint32_t num_blks;
+ adap_device_t device[MAX_ROW_SIZE_40LD];
+}__attribute__ ((packed)) adap_span_40ld_t;
+
+
+/**
+ * adap_span_8ld_t - 8LD span
+ * @start_blk : starting block
+ * @num_blks : number of blocks
+ */
+typedef struct {
+ uint32_t start_blk;
+ uint32_t num_blks;
+ adap_device_t device[MAX_ROW_SIZE_8LD];
+}__attribute__ ((packed)) adap_span_8ld_t;
+
+
+/**
+ * logdrv_param_t - logical drives parameters
+ *
+ * @span_depth : total number of spans
+ * @level : RAID level
+ * @read_ahead : read ahead, no read ahead, adaptive read ahead
+ * @stripe_sz : encoded stripe size
+ * @status : status of the logical drive
+ * @write_mode : write mode, write_through/write_back
+ * @direct_io : direct io or through cache
+ * @row_size : number of stripes in a row
+ */
+typedef struct {
+ uint8_t span_depth;
+ uint8_t level;
+ uint8_t read_ahead;
+ uint8_t stripe_sz;
+ uint8_t status;
+ uint8_t write_mode;
+ uint8_t direct_io;
+ uint8_t row_size;
+} __attribute__ ((packed)) logdrv_param_t;
+
+
+/**
+ * logdrv_40ld_t - logical drive definition for 40LD controllers
+ * @lparam : logical drives parameters
+ * @span : span
+ */
+typedef struct {
+ logdrv_param_t lparam;
+ adap_span_40ld_t span[SPAN_DEPTH_8_SPANS];
+}__attribute__ ((packed)) logdrv_40ld_t;
+
+
+/**
+ * logdrv_8ld_span8_t - logical drive definition for 8LD controllers
+ * @lparam : logical drives parameters
+ * @span : span
+ *
+ * 8-LD logical drive with upto 8 spans
+ */
+typedef struct {
+ logdrv_param_t lparam;
+ adap_span_8ld_t span[SPAN_DEPTH_8_SPANS];
+}__attribute__ ((packed)) logdrv_8ld_span8_t;
+
+
+/**
+ * logdrv_8ld_span4_t - logical drive definition for 8LD controllers
+ * @lparam : logical drives parameters
+ * @span : span
+ *
+ * 8-LD logical drive with upto 4 spans
+ */
+typedef struct {
+ logdrv_param_t lparam;
+ adap_span_8ld_t span[SPAN_DEPTH_4_SPANS];
+}__attribute__ ((packed)) logdrv_8ld_span4_t;
+
+
+/**
+ * phys_drive_t - physical device information
+ * @type : Type of the device
+ * @cur_status : current status of the device
+ * @tag_depth : Level of tagging
+ * @sync_neg : sync negotiation - ENABLE or DISBALE
+ * @size : configurable size in terms of 512 byte
+ */
+typedef struct {
+ uint8_t type;
+ uint8_t cur_status;
+ uint8_t tag_depth;
+ uint8_t sync_neg;
+ uint32_t size;
+}__attribute__ ((packed)) phys_drive_t;
+
+
+/**
+ * disk_array_40ld_t - disk array for 40LD controllers
+ * @numldrv : number of logical drives
+ * @resvd :
+ * @ldrv : logical drives information
+ * @pdrv : physical drives information
+ */
+typedef struct {
+ uint8_t numldrv;
+ uint8_t resvd[3];
+ logdrv_40ld_t ldrv[MAX_LOGICAL_DRIVES_40LD];
+ phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_40ld_t;
+
+
+/**
+ * disk_array_8ld_span8_t - disk array for 8LD controllers
+ * @numldrv : number of logical drives
+ * @resvd :
+ * @ldrv : logical drives information
+ * @pdrv : physical drives information
+ *
+ * Disk array for 8LD logical drives with upto 8 spans
+ */
+typedef struct {
+ uint8_t numldrv;
+ uint8_t resvd[3];
+ logdrv_8ld_span8_t ldrv[MAX_LOGICAL_DRIVES_8LD];
+ phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_8ld_span8_t;
+
+
+/**
+ * disk_array_8ld_span4_t - disk array for 8LD controllers
+ * @numldrv : number of logical drives
+ * @resvd :
+ * @ldrv : logical drives information
+ * @pdrv : physical drives information
+ *
+ * Disk array for 8LD logical drives with upto 4 spans
+ */
+typedef struct {
+ uint8_t numldrv;
+ uint8_t resvd[3];
+ logdrv_8ld_span4_t ldrv[MAX_LOGICAL_DRIVES_8LD];
+ phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_8ld_span4_t;
+
+
+/**
+ * private_bios_data - bios private data for boot devices
+ * @geometry : bits 0-3 - BIOS geometry, 0x0001 - 1GB, 0x0010 - 2GB,
+ * 0x1000 - 8GB, Others values are invalid
+ * @unused : bits 4-7 are unused
+ * @boot_drv : logical drive set as boot drive, 0..7 - for 8LD cards,
+ * 0..39 - for 40LD cards
+ * @cksum : 0-(sum of first 13 bytes of this structure)
+ */
+struct private_bios_data {
+ uint8_t geometry :4;
+ uint8_t unused :4;
+ uint8_t boot_drv;
+ uint8_t rsvd[12];
+ uint16_t cksum;
+} __attribute__ ((packed));
+
+
+/**
+ * mbox_sgl64 - 64-bit scatter list for mailbox based controllers
+ * @address : address of the buffer
+ * @length : data transfer length
+ */
+typedef struct {
+ uint64_t address;
+ uint32_t length;
+} __attribute__ ((packed)) mbox_sgl64;
+
+/**
+ * mbox_sgl32 - 32-bit scatter list for mailbox based controllers
+ * @address : address of the buffer
+ * @length : data transfer length
+ */
+typedef struct {
+ uint32_t address;
+ uint32_t length;
+} __attribute__ ((packed)) mbox_sgl32;
+
+#endif // _MRAID_MBOX_DEFS_H_
+
+/* vim: set ts=8 sw=8 tw=78: */