Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-cris/arch-v10/uaccess.h b/include/asm-cris/arch-v10/uaccess.h
new file mode 100644
index 0000000..787d2e6
--- /dev/null
+++ b/include/asm-cris/arch-v10/uaccess.h
@@ -0,0 +1,660 @@
+/*
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ * Hans-Peter Nilsson (hp@axis.com)
+ *
+ */
+#ifndef _CRIS_ARCH_UACCESS_H
+#define _CRIS_ARCH_UACCESS_H
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ *
+ * Note that PC at a fault is the address *after* the faulting
+ * instruction.
+ */
+#define __put_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ " "op" %1,[%2]\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " jump 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .previous\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err))
+
+#define __put_user_asm_64(x, addr, err) \
+ __asm__ __volatile__( \
+ " move.d %M1,[%2]\n" \
+ "2: move.d %H1,[%2+4]\n" \
+ "4:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " jump 4b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .dword 4b,3b\n" \
+ " .previous\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err))
+
+/* See comment before __put_user_asm. */
+
+#define __get_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ " "op" [%2],%1\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " moveq 0,%1\n" \
+ " jump 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .previous\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "g" (-EFAULT), "0" (err))
+
+#define __get_user_asm_64(x, addr, err) \
+ __asm__ __volatile__( \
+ " move.d [%2],%M1\n" \
+ "2: move.d [%2+4],%H1\n" \
+ "4:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " moveq 0,%1\n" \
+ " jump 4b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .dword 4b,3b\n" \
+ " .previous\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "g" (-EFAULT), "0" (err))
+
+/*
+ * Copy a null terminated string from userspace.
+ *
+ * Must return:
+ * -EFAULT for an exception
+ * count if we hit the buffer limit
+ * bytes copied if we hit a null byte
+ * (without the null byte)
+ */
+extern inline long
+__do_strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res;
+
+ if (count == 0)
+ return 0;
+
+ /*
+ * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop.
+ * So do we.
+ *
+ * This code is deduced from:
+ *
+ * char tmp2;
+ * long tmp1, tmp3
+ * tmp1 = count;
+ * while ((*dst++ = (tmp2 = *src++)) != 0
+ * && --tmp1)
+ * ;
+ *
+ * res = count - tmp1;
+ *
+ * with tweaks.
+ */
+
+ __asm__ __volatile__ (
+ " move.d %3,%0\n"
+ " move.b [%2+],$r9\n"
+ "1: beq 2f\n"
+ " move.b $r9,[%1+]\n"
+
+ " subq 1,%0\n"
+ " bne 1b\n"
+ " move.b [%2+],$r9\n"
+
+ "2: sub.d %3,%0\n"
+ " neg.d %0,%0\n"
+ "3:\n"
+ " .section .fixup,\"ax\"\n"
+ "4: move.d %7,%0\n"
+ " jump 3b\n"
+
+ /* There's one address for a fault at the first move, and
+ two possible PC values for a fault at the second move,
+ being a delay-slot filler. However, the branch-target
+ for the second move is the same as the first address.
+ Just so you don't get confused... */
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .dword 1b,4b\n"
+ " .dword 2b,4b\n"
+ " .previous"
+ : "=r" (res), "=r" (dst), "=r" (src), "=r" (count)
+ : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT)
+ : "r9");
+
+ return res;
+}
+
+/* A few copy asms to build up the more complex ones from.
+
+ Note again, a post-increment is performed regardless of whether a bus
+ fault occurred in that instruction, and PC for a faulted insn is the
+ address *after* the insn. */
+
+#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm__ __volatile__ ( \
+ COPY \
+ "1:\n" \
+ " .section .fixup,\"ax\"\n" \
+ FIXUP \
+ " jump 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ TENTRY \
+ " .previous\n" \
+ : "=r" (to), "=r" (from), "=r" (ret) \
+ : "0" (to), "1" (from), "2" (ret) \
+ : "r9", "memory")
+
+#define __asm_copy_from_user_1(to, from, ret) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "2: move.b $r9,[%0+]\n", \
+ "3: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ "2: move.w $r9,[%0+]\n" COPY, \
+ "3: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_2(to, from, ret) \
+ __asm_copy_from_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_3(to, from, ret) \
+ __asm_copy_from_user_2x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "4: move.b $r9,[%0+]\n", \
+ "5: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "2: move.d $r9,[%0+]\n" COPY, \
+ "3: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_4(to, from, ret) \
+ __asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_5(to, from, ret) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "4: move.b $r9,[%0+]\n", \
+ "5: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ "4: move.w $r9,[%0+]\n" COPY, \
+ "5: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_6(to, from, ret) \
+ __asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_7(to, from, ret) \
+ __asm_copy_from_user_6x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "6: move.b $r9,[%0+]\n", \
+ "7: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "4: move.d $r9,[%0+]\n" COPY, \
+ "5: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_8(to, from, ret) \
+ __asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_9(to, from, ret) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "6: move.b $r9,[%0+]\n", \
+ "7: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ "6: move.w $r9,[%0+]\n" COPY, \
+ "7: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_10(to, from, ret) \
+ __asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_11(to, from, ret) \
+ __asm_copy_from_user_10x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "8: move.b $r9,[%0+]\n", \
+ "9: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "6: move.d $r9,[%0+]\n" COPY, \
+ "7: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_12(to, from, ret) \
+ __asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_13(to, from, ret) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "8: move.b $r9,[%0+]\n", \
+ "9: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ "8: move.w $r9,[%0+]\n" COPY, \
+ "9: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_14(to, from, ret) \
+ __asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_15(to, from, ret) \
+ __asm_copy_from_user_14x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ "10: move.b $r9,[%0+]\n", \
+ "11: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 10b,11b\n")
+
+#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "8: move.d $r9,[%0+]\n" COPY, \
+ "9: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_16(to, from, ret) \
+ __asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_16x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "10: move.d $r9,[%0+]\n" COPY, \
+ "11: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_from_user_20(to, from, ret) \
+ __asm_copy_from_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_20x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ "12: move.d $r9,[%0+]\n" COPY, \
+ "13: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_from_user_24(to, from, ret) \
+ __asm_copy_from_user_24x_cont(to, from, ret, "", "", "")
+
+/* And now, the to-user ones. */
+
+#define __asm_copy_to_user_1(to, from, ret) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n2:\n", \
+ "3: addq 1,%2\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ " move.w $r9,[%0+]\n2:\n" COPY, \
+ "3: addq 2,%2\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_2(to, from, ret) \
+ __asm_copy_to_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_3(to, from, ret) \
+ __asm_copy_to_user_2x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n4:\n", \
+ "5: addq 1,%2\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n2:\n" COPY, \
+ "3: addq 4,%2\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_4(to, from, ret) \
+ __asm_copy_to_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_5(to, from, ret) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n4:\n", \
+ "5: addq 1,%2\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ " move.w $r9,[%0+]\n4:\n" COPY, \
+ "5: addq 2,%2\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_6(to, from, ret) \
+ __asm_copy_to_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_7(to, from, ret) \
+ __asm_copy_to_user_6x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n6:\n", \
+ "7: addq 1,%2\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n4:\n" COPY, \
+ "5: addq 4,%2\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_8(to, from, ret) \
+ __asm_copy_to_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_9(to, from, ret) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n6:\n", \
+ "7: addq 1,%2\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ " move.w $r9,[%0+]\n6:\n" COPY, \
+ "7: addq 2,%2\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_10(to, from, ret) \
+ __asm_copy_to_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_11(to, from, ret) \
+ __asm_copy_to_user_10x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n8:\n", \
+ "9: addq 1,%2\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n6:\n" COPY, \
+ "7: addq 4,%2\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_12(to, from, ret) \
+ __asm_copy_to_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_13(to, from, ret) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n8:\n", \
+ "9: addq 1,%2\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.w [%1+],$r9\n" \
+ " move.w $r9,[%0+]\n8:\n" COPY, \
+ "9: addq 2,%2\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_14(to, from, ret) \
+ __asm_copy_to_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_15(to, from, ret) \
+ __asm_copy_to_user_14x_cont(to, from, ret, \
+ " move.b [%1+],$r9\n" \
+ " move.b $r9,[%0+]\n10:\n", \
+ "11: addq 1,%2\n", \
+ " .dword 10b,11b\n")
+
+#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n8:\n" COPY, \
+ "9: addq 4,%2\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_16(to, from, ret) \
+ __asm_copy_to_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_16x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n10:\n" COPY, \
+ "11: addq 4,%2\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_to_user_20(to, from, ret) \
+ __asm_copy_to_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_20x_cont(to, from, ret, \
+ " move.d [%1+],$r9\n" \
+ " move.d $r9,[%0+]\n12:\n" COPY, \
+ "13: addq 4,%2\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_to_user_24(to, from, ret) \
+ __asm_copy_to_user_24x_cont(to, from, ret, "", "", "")
+
+/* Define a few clearing asms with exception handlers. */
+
+/* This frame-asm is like the __asm_copy_user_cont one, but has one less
+ input. */
+
+#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm__ __volatile__ ( \
+ CLEAR \
+ "1:\n" \
+ " .section .fixup,\"ax\"\n" \
+ FIXUP \
+ " jump 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ TENTRY \
+ " .previous" \
+ : "=r" (to), "=r" (ret) \
+ : "0" (to), "1" (ret) \
+ : "memory")
+
+#define __asm_clear_1(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.b [%0+]\n2:\n", \
+ "3: addq 1,%1\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_clear_2(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.w [%0+]\n2:\n", \
+ "3: addq 2,%1\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_clear_3(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.w [%0+]\n" \
+ "2: clear.b [%0+]\n3:\n", \
+ "4: addq 2,%1\n" \
+ "5: addq 1,%1\n", \
+ " .dword 2b,4b\n" \
+ " .dword 3b,5b\n")
+
+#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear(to, ret, \
+ " clear.d [%0+]\n2:\n" CLEAR, \
+ "3: addq 4,%1\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_clear_4(to, ret) \
+ __asm_clear_4x_cont(to, ret, "", "", "")
+
+#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_4x_cont(to, ret, \
+ " clear.d [%0+]\n4:\n" CLEAR, \
+ "5: addq 4,%1\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_clear_8(to, ret) \
+ __asm_clear_8x_cont(to, ret, "", "", "")
+
+#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_8x_cont(to, ret, \
+ " clear.d [%0+]\n6:\n" CLEAR, \
+ "7: addq 4,%1\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_clear_12(to, ret) \
+ __asm_clear_12x_cont(to, ret, "", "", "")
+
+#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_12x_cont(to, ret, \
+ " clear.d [%0+]\n8:\n" CLEAR, \
+ "9: addq 4,%1\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_clear_16(to, ret) \
+ __asm_clear_16x_cont(to, ret, "", "", "")
+
+#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_16x_cont(to, ret, \
+ " clear.d [%0+]\n10:\n" CLEAR, \
+ "11: addq 4,%1\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_clear_20(to, ret) \
+ __asm_clear_20x_cont(to, ret, "", "", "")
+
+#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_20x_cont(to, ret, \
+ " clear.d [%0+]\n12:\n" CLEAR, \
+ "13: addq 4,%1\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_clear_24(to, ret) \
+ __asm_clear_24x_cont(to, ret, "", "", "")
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return length of string in userspace including terminating 0
+ * or 0 for error. Return a value greater than N if too long.
+ */
+
+extern inline long
+strnlen_user(const char *s, long n)
+{
+ long res, tmp1;
+
+ if (!access_ok(VERIFY_READ, s, 0))
+ return 0;
+
+ /*
+ * This code is deduced from:
+ *
+ * tmp1 = n;
+ * while (tmp1-- > 0 && *s++)
+ * ;
+ *
+ * res = n - tmp1;
+ *
+ * (with tweaks).
+ */
+
+ __asm__ __volatile__ (
+ " move.d %1,$r9\n"
+ "0:\n"
+ " ble 1f\n"
+ " subq 1,$r9\n"
+
+ " test.b [%0+]\n"
+ " bne 0b\n"
+ " test.d $r9\n"
+ "1:\n"
+ " move.d %1,%0\n"
+ " sub.d $r9,%0\n"
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+
+ "3: clear.d %0\n"
+ " jump 2b\n"
+
+ /* There's one address for a fault at the first move, and
+ two possible PC values for a fault at the second move,
+ being a delay-slot filler. However, the branch-target
+ for the second move is the same as the first address.
+ Just so you don't get confused... */
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .dword 0b,3b\n"
+ " .dword 1b,3b\n"
+ " .previous\n"
+ : "=r" (res), "=r" (tmp1)
+ : "0" (s), "1" (n)
+ : "r9");
+
+ return res;
+}
+
+#endif