Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
new file mode 100644
index 0000000..c916bd2
--- /dev/null
+++ b/include/asm-ia64/sn/addrs.h
@@ -0,0 +1,238 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ * Memory/SHUB Address Format:
+ * +-+---------+--+--------------+
+ * |0| NASID |AS| NodeOffset |
+ * +-+---------+--+--------------+
+ *
+ * NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ * 00: Local Resources and MMR space
+ * Top bit of NodeOffset
+ * 0: Local resources space
+ * node id:
+ * 0: IA64/NT compatibility space
+ * 2: Local MMR Space
+ * 4: Local memory, regardless of local node id
+ * 1: Global MMR space
+ * 01: GET space.
+ * 10: AMO space.
+ * 11: Cacheable memory space.
+ *
+ * NodeOffset: byte offset
+ *
+ *
+ * TIO address format:
+ * +-+----------+--+--------------+
+ * |0| NASID |AS| Nodeoffset |
+ * +-+----------+--+--------------+
+ *
+ * NASID: (low NASID bit is 1) TIO
+ * AS: 2-bit Chiplet Identifier
+ * 00: TIO LB (Indicates TIO MMR access.)
+ * 01: TIO ICE (indicates coretalk space access.)
+ *
+ * NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK (sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT (sn_hub_info->nasid_shift)
+#define AS_SHIFT (sn_hub_info->as_shift)
+#define AS_BITMASK 0x3UL
+
+#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT)
+#define REGION_BITS 0xe000000000000000UL
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL 1UL
+#define AS_AMO_VAL 2UL
+#define AS_CAC_VAL 3UL
+#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT)
+
+
+/*
+ * Base addresses for various address ranges.
+ */
+#define CACHED 0xe000000000000000UL
+#define UNCACHED 0xc000000000000000UL
+#define UNCACHED_PHYS 0x8000000000000000UL
+
+
+/*
+ * Virtual Mode Local & Global MMR space.
+ */
+#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL
+#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE (UNCACHED | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE (UNCACHED_PHYS | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL
+#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE (UNCACHED | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE (UNCACHED_PHYS | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK (~(REGION_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT)
+#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP 0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE (CACHED | AS_CAC_SPACE)
+#define AMO_BASE (UNCACHED | AS_AMO_SPACE)
+#define GET_BASE (CACHED | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x) (TO_PHYS_MASK & (x))
+#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
+#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
+#define TO_GET(x) (GET_BASE | TO_PHYS(x))
+
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ * II - squeeze out the AS bits
+ * TIO- requires a chiplet id in bits 38-39. For DMA to memory,
+ * the chiplet id is zero. If we implement TIO-TIO dma, we might need
+ * to insert a chiplet id into this macro. However, it is our belief
+ * right now that this chiplet id will be ICE, which is also zero.
+ */
+#define PHYS_TO_TIODMA(x) ( (((u64)(x) & NASID_MASK) << 2) | NODE_OFFSET(x))
+#define PHYS_TO_DMA(x) ( (((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS 29 /* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */
+#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+ : RAW_NODE_SWIN_BASE(n, w))
+#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define BWIN_SIZE (1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK 0x7
+#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK 0x7
+#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS 24
+#define SWIN_WIDGET_MASK 0xF
+
+#define TIO_SWIN_SIZE_BITS 28
+#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK 0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers. The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ * WARNING:
+ * When certain Hub chip workaround are defined, it's not sufficient
+ * to dereference the *_HUB_ADDR() macros. You should instead use
+ * HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ * They're always safe.
+ */
+#define REMOTE_HUB_ADDR(n,x) \
+ ((n & 1) ? \
+ /* TIO: */ \
+ ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x))) \
+ : /* SHUB: */ \
+ (((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+ : ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
+
+
+
+#define HUB_L(x) (*((volatile typeof(*x) *)x))
+#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+
+#endif /* _ASM_IA64_SN_ADDRS_H */