Blackfin arch: cleanup warnings from checkpatch -- no functional changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index edd31ce..4545f36 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -34,7 +34,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -51,11 +51,11 @@
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
@@ -98,7 +98,7 @@
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
- },{
+ }, {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1, /* Framework bus number */
@@ -145,7 +145,7 @@
.start = 0x20200300,
.end = 0x20200300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -194,11 +194,11 @@
.start = 0x20308000,
.end = 0x20308000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20308004,
.end = 0x20308004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ,
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 0b522d9..0000b8f 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -35,7 +35,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -61,7 +61,7 @@
.start = 0x20310300,
.end = 0x20310300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -85,11 +85,11 @@
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
index c0f43cc..9bc1f0d 100644
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@@ -30,7 +30,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -53,11 +53,11 @@
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 9a472fe..a9143c4 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -37,7 +37,7 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
@@ -62,7 +62,7 @@
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -83,7 +83,7 @@
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -108,11 +108,11 @@
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
@@ -229,19 +229,19 @@
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c
index 99547c4..6fd9cfd 100644
--- a/arch/blackfin/mach-bf533/cpu.c
+++ b/arch/blackfin/mach-bf533/cpu.c
@@ -79,8 +79,7 @@
int i;
struct cpufreq_freqs freqs;
- if (cpufreq_frequency_table_target
- (policy, bf533_freq_table, target_freq, relation, &index))
+ if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index))
return -EINVAL;
cclk_mhz = bf533_freq_table[index].frequency;
vco_mhz = bf533_freq_table[index].index;
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index a3e1789..7d79e0f 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -28,8 +28,8 @@
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{