)]}'
{
  "commit": "202f4f53e503ae09b431459131b5b3a99fa6d839",
  "tree": "71f4597427f8bc9011aca93f873bd01154f2d25d",
  "parents": [
    "2d3b07c07b39c4b7d9b6641052a02d996cd5d87c"
  ],
  "author": {
    "name": "MyungJoo Ham",
    "email": "myungjoo.ham@samsung.com",
    "time": "Fri Aug 20 14:43:56 2010 +0900"
  },
  "committer": {
    "name": "Liam Girdwood",
    "email": "lrg@slimlogic.co.uk",
    "time": "Thu Oct 28 22:40:31 2010 +0100"
  },
  "message": "MAX8952 PMIC Driver Initial Release\n\nMAX8952 PMIC is used to provide voltage output between 770mV - 1400mV\nwith DVS support. In this initial release, users can set voltages for\nfour DVS modes, RAMP delay values, and SYNC frequency.\nControlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID\nis not supported in this release.\n\nIf GPIO of EN is not valid in platform data, the driver assumes that it\nis always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down\nVID0 and VID1 to fix DVS mode as 0 and disables DVS support.\n\nWe assume that V_OUT is capable to provide every voltage from 770mV to\n1.40V in 10mV steps although the data sheet has some ambiguity on it.\n\nSigned-off-by: MyungJoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n--\nv2:\n\t- Style correction\n\t- Can accept platform_data with invalid GPIOs\n\t- Removed unnecessary features\n\t- Improved error handling\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "172951bf23a4c01e3f440b6b9ce85911d53cb174",
      "old_mode": 33188,
      "old_path": "drivers/regulator/Kconfig",
      "new_id": "4889caabc6324730870484798b043f0f34731c38",
      "new_mode": 33188,
      "new_path": "drivers/regulator/Kconfig"
    },
    {
      "type": "modify",
      "old_id": "8285fd832e16fbe9492cbd64cfd9604a015221f4",
      "old_mode": 33188,
      "old_path": "drivers/regulator/Makefile",
      "new_id": "beff6da6eff6ee193db7814ebf5ee466ed2c6398",
      "new_mode": 33188,
      "new_path": "drivers/regulator/Makefile"
    },
    {
      "type": "add",
      "old_id": "0000000000000000000000000000000000000000",
      "old_mode": 0,
      "old_path": "/dev/null",
      "new_id": "f2af0b1c3925f3c648f90e7a7e717ef6d0be5d0f",
      "new_mode": 33188,
      "new_path": "drivers/regulator/max8952.c"
    },
    {
      "type": "add",
      "old_id": "0000000000000000000000000000000000000000",
      "old_mode": 0,
      "old_path": "/dev/null",
      "new_id": "45e42855ad050f6705a67cd22cd64f85eb701154",
      "new_mode": 33188,
      "new_path": "include/linux/regulator/max8952.h"
    }
  ]
}