| /* | 
 |  * Copyright 2008 Analog Devices Inc. | 
 |  * | 
 |  * Licensed under the GPL-2 or later. | 
 |  */ | 
 |  | 
 | #include <linux/cdev.h> | 
 | #include <linux/device.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/types.h> | 
 | #include <linux/cpufreq.h> | 
 |  | 
 | #include <asm/delay.h> | 
 | #include <asm/dpmc.h> | 
 |  | 
 | #define DRIVER_NAME "bfin dpmc" | 
 |  | 
 | #define dprintk(msg...) \ | 
 | 	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, DRIVER_NAME, msg) | 
 |  | 
 | struct bfin_dpmc_platform_data *pdata; | 
 |  | 
 | /** | 
 |  *	bfin_set_vlev - Update VLEV field in VR_CTL Reg. | 
 |  *			Avoid BYPASS sequence | 
 |  */ | 
 | static void bfin_set_vlev(unsigned int vlev) | 
 | { | 
 | 	unsigned pll_lcnt; | 
 |  | 
 | 	pll_lcnt = bfin_read_PLL_LOCKCNT(); | 
 |  | 
 | 	bfin_write_PLL_LOCKCNT(1); | 
 | 	bfin_write_VR_CTL((bfin_read_VR_CTL() & ~VLEV) | vlev); | 
 | 	bfin_write_PLL_LOCKCNT(pll_lcnt); | 
 | } | 
 |  | 
 | /** | 
 |  *	bfin_get_vlev - Get CPU specific VLEV from platform device data | 
 |  */ | 
 | static unsigned int bfin_get_vlev(unsigned int freq) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (!pdata) | 
 | 		goto err_out; | 
 |  | 
 | 	freq >>= 16; | 
 |  | 
 | 	for (i = 0; i < pdata->tabsize; i++) | 
 | 		if (freq <= (pdata->tuple_tab[i] & 0xFFFF)) | 
 | 			return pdata->tuple_tab[i] >> 16; | 
 |  | 
 | err_out: | 
 | 	printk(KERN_WARNING "DPMC: No suitable CCLK VDDINT voltage pair found\n"); | 
 | 	return VLEV_120; | 
 | } | 
 |  | 
 | #ifdef CONFIG_CPU_FREQ | 
 | static int | 
 | vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) | 
 | { | 
 | 	struct cpufreq_freqs *freq = data; | 
 |  | 
 | 	if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) { | 
 | 		bfin_set_vlev(bfin_get_vlev(freq->new)); | 
 | 		udelay(pdata->vr_settling_time); /* Wait until Volatge settled */ | 
 |  | 
 | 	} else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) | 
 | 		bfin_set_vlev(bfin_get_vlev(freq->new)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct notifier_block vreg_cpufreq_notifier_block = { | 
 | 	.notifier_call	= vreg_cpufreq_notifier | 
 | }; | 
 | #endif /* CONFIG_CPU_FREQ */ | 
 |  | 
 | /** | 
 |  *	bfin_dpmc_probe - | 
 |  * | 
 |  */ | 
 | static int __devinit bfin_dpmc_probe(struct platform_device *pdev) | 
 | { | 
 | 	if (pdev->dev.platform_data) | 
 | 		pdata = pdev->dev.platform_data; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return cpufreq_register_notifier(&vreg_cpufreq_notifier_block, | 
 | 					 CPUFREQ_TRANSITION_NOTIFIER); | 
 | } | 
 |  | 
 | /** | 
 |  *	bfin_dpmc_remove - | 
 |  */ | 
 | static int __devexit bfin_dpmc_remove(struct platform_device *pdev) | 
 | { | 
 | 	pdata = NULL; | 
 | 	return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block, | 
 | 					 CPUFREQ_TRANSITION_NOTIFIER); | 
 | } | 
 |  | 
 | struct platform_driver bfin_dpmc_device_driver = { | 
 | 	.probe   = bfin_dpmc_probe, | 
 | 	.remove  = __devexit_p(bfin_dpmc_remove), | 
 | 	.driver  = { | 
 | 		.name = DRIVER_NAME, | 
 | 	} | 
 | }; | 
 |  | 
 | /** | 
 |  *	bfin_dpmc_init - Init driver | 
 |  */ | 
 | static int __init bfin_dpmc_init(void) | 
 | { | 
 | 	return platform_driver_register(&bfin_dpmc_device_driver); | 
 | } | 
 | module_init(bfin_dpmc_init); | 
 |  | 
 | /** | 
 |  *	bfin_dpmc_exit - break down driver | 
 |  */ | 
 | static void __exit bfin_dpmc_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&bfin_dpmc_device_driver); | 
 | } | 
 | module_exit(bfin_dpmc_exit); | 
 |  | 
 | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); | 
 | MODULE_DESCRIPTION("cpu power management driver for Blackfin"); | 
 | MODULE_LICENSE("GPL"); |