| /* | 
 |  *  Driver for A2 audio system used in SGI machines | 
 |  *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> | 
 |  *   | 
 |  *  Based on Ulf Carlsson's code. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as  | 
 |  *  published by the Free Software Foundation. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *  GNU General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License | 
 |  *  along with this program; if not, write to the Free Software | 
 |  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  *  Supported devices: | 
 |  *  /dev/dsp    standard dsp device, (mostly) OSS compatible | 
 |  *  /dev/mixer	standard mixer device, (mostly) OSS compatible | 
 |  * | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/sound.h> | 
 | #include <linux/soundcard.h> | 
 | #include <linux/mutex.h> | 
 |  | 
 |  | 
 | #include <asm/io.h> | 
 | #include <asm/sgi/hpc3.h> | 
 | #include <asm/sgi/ip22.h> | 
 |  | 
 | #include "hal2.h" | 
 |  | 
 | #if 0 | 
 | #define DEBUG(args...)		printk(args) | 
 | #else | 
 | #define DEBUG(args...) | 
 | #endif | 
 |  | 
 | #if 0  | 
 | #define DEBUG_MIX(args...)	printk(args) | 
 | #else | 
 | #define DEBUG_MIX(args...) | 
 | #endif | 
 |  | 
 | /* | 
 |  * Before touching these look how it works. It is a bit unusual I know, | 
 |  * but it helps to keep things simple. This driver is considered complete | 
 |  * and I won't add any new features although hardware has many cool | 
 |  * capabilities. | 
 |  * (Historical note: HAL2 driver was first written by Ulf Carlsson - ALSA | 
 |  * 0.3 running with 2.2.x kernel. Then ALSA changed completely and it | 
 |  * seemed easier to me to write OSS driver from scratch - this one. Now | 
 |  * when ALSA is official part of 2.6 kernel it's time to write ALSA driver | 
 |  * using (hopefully) final version of ALSA interface) | 
 |  */ | 
 | #define H2_BLOCK_SIZE	1024 | 
 | #define H2_ADC_BUFSIZE	8192 | 
 | #define H2_DAC_BUFSIZE	16834 | 
 |  | 
 | struct hal2_pbus { | 
 | 	struct hpc3_pbus_dmacregs *pbus; | 
 | 	int pbusnr; | 
 | 	unsigned int ctrl;		/* Current state of pbus->pbdma_ctrl */ | 
 | }; | 
 |  | 
 | struct hal2_desc { | 
 | 	struct hpc_dma_desc desc; | 
 | 	u32 cnt;			/* don't touch, it is also padding */ | 
 | }; | 
 |  | 
 | struct hal2_codec { | 
 | 	unsigned char *buffer; | 
 | 	struct hal2_desc *desc; | 
 | 	int desc_count; | 
 | 	int tail, head;			/* tail index, head index */ | 
 | 	struct hal2_pbus pbus; | 
 | 	unsigned int format;		/* Audio data format */ | 
 | 	int voices;			/* mono/stereo */ | 
 | 	unsigned int sample_rate; | 
 | 	unsigned int master;		/* Master frequency */ | 
 | 	unsigned short mod;		/* MOD value */ | 
 | 	unsigned short inc;		/* INC value */ | 
 |  | 
 | 	wait_queue_head_t dma_wait; | 
 | 	spinlock_t lock; | 
 | 	struct mutex sem; | 
 |  | 
 | 	int usecount;			/* recording and playback are | 
 | 					 * independent */ | 
 | }; | 
 |  | 
 | #define H2_MIX_OUTPUT_ATT	0 | 
 | #define H2_MIX_INPUT_GAIN	1 | 
 | #define H2_MIXERS		2 | 
 | struct hal2_mixer { | 
 | 	int modcnt; | 
 | 	unsigned int master; | 
 | 	unsigned int volume[H2_MIXERS]; | 
 | }; | 
 |  | 
 | struct hal2_card { | 
 | 	int dev_dsp;			/* audio device */ | 
 | 	int dev_mixer;			/* mixer device */ | 
 | 	int dev_midi;			/* midi device */ | 
 |  | 
 | 	struct hal2_ctl_regs *ctl_regs;	/* HAL2 ctl registers */ | 
 | 	struct hal2_aes_regs *aes_regs;	/* HAL2 aes registers */ | 
 | 	struct hal2_vol_regs *vol_regs;	/* HAL2 vol registers */ | 
 | 	struct hal2_syn_regs *syn_regs;	/* HAL2 syn registers */ | 
 |  | 
 | 	struct hal2_codec dac; | 
 | 	struct hal2_codec adc; | 
 | 	struct hal2_mixer mixer; | 
 | }; | 
 |  | 
 | #define H2_INDIRECT_WAIT(regs)	while (regs->isr & H2_ISR_TSTATUS); | 
 |  | 
 | #define H2_READ_ADDR(addr)	(addr | (1<<7)) | 
 | #define H2_WRITE_ADDR(addr)	(addr) | 
 |  | 
 | static char *hal2str = "HAL2"; | 
 |  | 
 | /* | 
 |  * I doubt anyone has a machine with two HAL2 cards. It's possible to | 
 |  * have two HPC's, so it is probably possible to have two HAL2 cards. | 
 |  * Try to deal with it, but note that it is not tested. | 
 |  */ | 
 | #define MAXCARDS	2 | 
 | static struct hal2_card* hal2_card[MAXCARDS]; | 
 |  | 
 | static const struct { | 
 | 	unsigned char idx:4, avail:1; | 
 | } mixtable[SOUND_MIXER_NRDEVICES] = { | 
 | 	[SOUND_MIXER_PCM]	= { H2_MIX_OUTPUT_ATT, 1 },	/* voice */ | 
 | 	[SOUND_MIXER_MIC]	= { H2_MIX_INPUT_GAIN, 1 },	/* mic */ | 
 | }; | 
 |  | 
 | #define H2_SUPPORTED_FORMATS	(AFMT_S16_LE | AFMT_S16_BE) | 
 |  | 
 | static inline void hal2_isr_write(struct hal2_card *hal2, u16 val) | 
 | { | 
 | 	hal2->ctl_regs->isr = val; | 
 | } | 
 |  | 
 | static inline u16 hal2_isr_look(struct hal2_card *hal2) | 
 | { | 
 | 	return hal2->ctl_regs->isr; | 
 | } | 
 |  | 
 | static inline u16 hal2_rev_look(struct hal2_card *hal2) | 
 | { | 
 | 	return hal2->ctl_regs->rev; | 
 | } | 
 |  | 
 | #ifdef HAL2_DUMP_REGS | 
 | static u16 hal2_i_look16(struct hal2_card *hal2, u16 addr) | 
 | { | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	return regs->idr0; | 
 | } | 
 | #endif | 
 |  | 
 | static u32 hal2_i_look32(struct hal2_card *hal2, u16 addr) | 
 | { | 
 | 	u32 ret; | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	ret = regs->idr0 & 0xffff; | 
 | 	regs->iar = H2_READ_ADDR(addr | 0x1); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	ret |= (regs->idr0 & 0xffff) << 16; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void hal2_i_write16(struct hal2_card *hal2, u16 addr, u16 val) | 
 | { | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->idr0 = val; | 
 | 	regs->idr1 = 0; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 |  | 
 | static void hal2_i_write32(struct hal2_card *hal2, u16 addr, u32 val) | 
 | { | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->idr0 = val & 0xffff; | 
 | 	regs->idr1 = val >> 16; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 |  | 
 | static void hal2_i_setbit16(struct hal2_card *hal2, u16 addr, u16 bit) | 
 | { | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	regs->idr0 = (regs->idr0 & 0xffff) | bit; | 
 | 	regs->idr1 = 0; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 |  | 
 | static void hal2_i_setbit32(struct hal2_card *hal2, u16 addr, u32 bit) | 
 | { | 
 | 	u32 tmp; | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	tmp = (regs->idr0 & 0xffff) | (regs->idr1 << 16) | bit; | 
 | 	regs->idr0 = tmp & 0xffff; | 
 | 	regs->idr1 = tmp >> 16; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 |  | 
 | static void hal2_i_clearbit16(struct hal2_card *hal2, u16 addr, u16 bit) | 
 | { | 
 | 	struct hal2_ctl_regs *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	regs->idr0 = (regs->idr0 & 0xffff) & ~bit; | 
 | 	regs->idr1 = 0; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 |  | 
 | #if 0 | 
 | static void hal2_i_clearbit32(struct hal2_card *hal2, u16 addr, u32 bit) | 
 | { | 
 | 	u32 tmp; | 
 | 	hal2_ctl_regs_t *regs = hal2->ctl_regs; | 
 |  | 
 | 	regs->iar = H2_READ_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | 	tmp = ((regs->idr0 & 0xffff) | (regs->idr1 << 16)) & ~bit; | 
 | 	regs->idr0 = tmp & 0xffff; | 
 | 	regs->idr1 = tmp >> 16; | 
 | 	regs->idr2 = 0; | 
 | 	regs->idr3 = 0; | 
 | 	regs->iar = H2_WRITE_ADDR(addr); | 
 | 	H2_INDIRECT_WAIT(regs); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef HAL2_DUMP_REGS | 
 | static void hal2_dump_regs(struct hal2_card *hal2) | 
 | { | 
 | 	DEBUG("isr: %08hx ", hal2_isr_look(hal2)); | 
 | 	DEBUG("rev: %08hx\n", hal2_rev_look(hal2)); | 
 | 	DEBUG("relay: %04hx\n", hal2_i_look16(hal2, H2I_RELAY_C)); | 
 | 	DEBUG("port en: %04hx ", hal2_i_look16(hal2, H2I_DMA_PORT_EN)); | 
 | 	DEBUG("dma end: %04hx ", hal2_i_look16(hal2, H2I_DMA_END)); | 
 | 	DEBUG("dma drv: %04hx\n", hal2_i_look16(hal2, H2I_DMA_DRV)); | 
 | 	DEBUG("syn ctl: %04hx ", hal2_i_look16(hal2, H2I_SYNTH_C)); | 
 | 	DEBUG("aesrx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESRX_C)); | 
 | 	DEBUG("aestx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESTX_C)); | 
 | 	DEBUG("dac ctl1: %04hx ", hal2_i_look16(hal2, H2I_ADC_C1)); | 
 | 	DEBUG("dac ctl2: %08x ", hal2_i_look32(hal2, H2I_ADC_C2)); | 
 | 	DEBUG("adc ctl1: %04hx ", hal2_i_look16(hal2, H2I_DAC_C1)); | 
 | 	DEBUG("adc ctl2: %08x ", hal2_i_look32(hal2, H2I_DAC_C2)); | 
 | 	DEBUG("syn map: %04hx\n", hal2_i_look16(hal2, H2I_SYNTH_MAP_C)); | 
 | 	DEBUG("bres1 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES1_C1)); | 
 | 	DEBUG("bres1 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES1_C2)); | 
 | 	DEBUG("bres2 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES2_C1)); | 
 | 	DEBUG("bres2 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES2_C2)); | 
 | 	DEBUG("bres3 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES3_C1)); | 
 | 	DEBUG("bres3 ctl2: %04x\n", hal2_i_look32(hal2, H2I_BRES3_C2)); | 
 | } | 
 | #endif | 
 |  | 
 | static struct hal2_card* hal2_dsp_find_card(int minor) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < MAXCARDS; i++) | 
 | 		if (hal2_card[i] != NULL && hal2_card[i]->dev_dsp == minor) | 
 | 			return hal2_card[i]; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct hal2_card* hal2_mixer_find_card(int minor) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < MAXCARDS; i++) | 
 | 		if (hal2_card[i] != NULL && hal2_card[i]->dev_mixer == minor) | 
 | 			return hal2_card[i]; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void hal2_inc_head(struct hal2_codec *codec) | 
 | { | 
 | 	codec->head++; | 
 | 	if (codec->head == codec->desc_count) | 
 | 		codec->head = 0; | 
 | } | 
 |  | 
 | static void hal2_inc_tail(struct hal2_codec *codec) | 
 | { | 
 | 	codec->tail++; | 
 | 	if (codec->tail == codec->desc_count) | 
 | 		codec->tail = 0; | 
 | } | 
 |  | 
 | static void hal2_dac_interrupt(struct hal2_codec *dac) | 
 | { | 
 | 	int running; | 
 |  | 
 | 	spin_lock(&dac->lock); | 
 | 	/* if tail buffer contains zero samples DMA stream was already | 
 | 	 * stopped */ | 
 | 	running = dac->desc[dac->tail].cnt; | 
 | 	dac->desc[dac->tail].cnt = 0; | 
 | 	dac->desc[dac->tail].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOX; | 
 | 	/* we just proccessed empty buffer, don't update tail pointer */ | 
 | 	if (running) | 
 | 		hal2_inc_tail(dac); | 
 | 	spin_unlock(&dac->lock); | 
 |  | 
 | 	wake_up(&dac->dma_wait); | 
 | } | 
 |  | 
 | static void hal2_adc_interrupt(struct hal2_codec *adc) | 
 | { | 
 | 	int running; | 
 |  | 
 | 	spin_lock(&adc->lock); | 
 | 	/* if head buffer contains nonzero samples DMA stream was already | 
 | 	 * stopped */ | 
 | 	running = !adc->desc[adc->head].cnt; | 
 | 	adc->desc[adc->head].cnt = H2_BLOCK_SIZE; | 
 | 	adc->desc[adc->head].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOR; | 
 | 	/* we just proccessed empty buffer, don't update head pointer */ | 
 | 	if (running) | 
 | 		hal2_inc_head(adc); | 
 | 	spin_unlock(&adc->lock); | 
 |  | 
 | 	wake_up(&adc->dma_wait); | 
 | } | 
 |  | 
 | static irqreturn_t hal2_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct hal2_card *hal2 = dev_id; | 
 | 	irqreturn_t ret = IRQ_NONE; | 
 |  | 
 | 	/* decide what caused this interrupt */ | 
 | 	if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { | 
 | 		hal2_dac_interrupt(&hal2->dac); | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 | 	if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { | 
 | 		hal2_adc_interrupt(&hal2->adc); | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate) | 
 | { | 
 | 	unsigned short mod; | 
 | 	 | 
 | 	DEBUG("rate: %d\n", rate); | 
 | 	 | 
 | 	if (rate < 4000) rate = 4000; | 
 | 	else if (rate > 48000) rate = 48000; | 
 |  | 
 | 	if (44100 % rate < 48000 % rate) { | 
 | 		mod = 4 * 44100 / rate; | 
 | 		codec->master = 44100; | 
 | 	} else { | 
 | 		mod = 4 * 48000 / rate; | 
 | 		codec->master = 48000; | 
 | 	} | 
 |  | 
 | 	codec->inc = 4; | 
 | 	codec->mod = mod; | 
 | 	rate = 4 * codec->master / mod; | 
 |  | 
 | 	DEBUG("real_rate: %d\n", rate); | 
 |  | 
 | 	return rate; | 
 | } | 
 |  | 
 | static void hal2_set_dac_rate(struct hal2_card *hal2) | 
 | { | 
 | 	unsigned int master = hal2->dac.master; | 
 | 	int inc = hal2->dac.inc; | 
 | 	int mod = hal2->dac.mod; | 
 |  | 
 | 	DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); | 
 | 	 | 
 | 	hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0); | 
 | 	hal2_i_write32(hal2, H2I_BRES1_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); | 
 | } | 
 |  | 
 | static void hal2_set_adc_rate(struct hal2_card *hal2) | 
 | { | 
 | 	unsigned int master = hal2->adc.master; | 
 | 	int inc = hal2->adc.inc; | 
 | 	int mod = hal2->adc.mod; | 
 |  | 
 | 	DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); | 
 | 	 | 
 | 	hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0); | 
 | 	hal2_i_write32(hal2, H2I_BRES2_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); | 
 | } | 
 |  | 
 | static void hal2_setup_dac(struct hal2_card *hal2) | 
 | { | 
 | 	unsigned int fifobeg, fifoend, highwater, sample_size; | 
 | 	struct hal2_pbus *pbus = &hal2->dac.pbus; | 
 |  | 
 | 	DEBUG("hal2_setup_dac\n"); | 
 | 	 | 
 | 	/* Now we set up some PBUS information. The PBUS needs information about | 
 | 	 * what portion of the fifo it will use. If it's receiving or | 
 | 	 * transmitting, and finally whether the stream is little endian or big | 
 | 	 * endian. The information is written later, on the start call. | 
 | 	 */ | 
 | 	sample_size = 2 * hal2->dac.voices; | 
 | 	/* Fifo should be set to hold exactly four samples. Highwater mark | 
 | 	 * should be set to two samples. */ | 
 | 	highwater = (sample_size * 2) >> 1;	/* halfwords */ | 
 | 	fifobeg = 0;				/* playback is first */ | 
 | 	fifoend = (sample_size * 4) >> 3;	/* doublewords */ | 
 | 	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD | | 
 | 		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | | 
 | 		     (hal2->dac.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); | 
 | 	/* We disable everything before we do anything at all */ | 
 | 	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; | 
 | 	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); | 
 | 	/* Setup the HAL2 for playback */ | 
 | 	hal2_set_dac_rate(hal2); | 
 | 	/* Set endianess */ | 
 | 	if (hal2->dac.format & AFMT_S16_LE) | 
 | 		hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); | 
 | 	else | 
 | 		hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); | 
 | 	/* Set DMA bus */ | 
 | 	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); | 
 | 	/* We are using 1st Bresenham clock generator for playback */ | 
 | 	hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) | 
 | 			| (1 << H2I_C1_CLKID_SHIFT) | 
 | 			| (hal2->dac.voices << H2I_C1_DATAT_SHIFT)); | 
 | } | 
 |  | 
 | static void hal2_setup_adc(struct hal2_card *hal2) | 
 | { | 
 | 	unsigned int fifobeg, fifoend, highwater, sample_size; | 
 | 	struct hal2_pbus *pbus = &hal2->adc.pbus; | 
 |  | 
 | 	DEBUG("hal2_setup_adc\n"); | 
 |  | 
 | 	sample_size = 2 * hal2->adc.voices; | 
 | 	highwater = (sample_size * 2) >> 1;		/* halfwords */ | 
 | 	fifobeg = (4 * 4) >> 3;				/* record is second */ | 
 | 	fifoend = (4 * 4 + sample_size * 4) >> 3;	/* doublewords */ | 
 | 	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |  | 
 | 		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | | 
 | 		     (hal2->adc.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); | 
 | 	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; | 
 | 	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); | 
 | 	/* Setup the HAL2 for record */ | 
 | 	hal2_set_adc_rate(hal2); | 
 | 	/* Set endianess */ | 
 | 	if (hal2->adc.format & AFMT_S16_LE) | 
 | 		hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); | 
 | 	else | 
 | 		hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); | 
 | 	/* Set DMA bus */ | 
 | 	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); | 
 | 	/* We are using 2nd Bresenham clock generator for record */ | 
 | 	hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) | 
 | 			| (2 << H2I_C1_CLKID_SHIFT) | 
 | 			| (hal2->adc.voices << H2I_C1_DATAT_SHIFT)); | 
 | } | 
 |  | 
 | static dma_addr_t hal2_desc_addr(struct hal2_codec *codec, int i) | 
 | { | 
 | 	if (--i < 0) | 
 | 		i = codec->desc_count - 1; | 
 | 	return codec->desc[i].desc.pnext; | 
 | } | 
 |  | 
 | static void hal2_start_dac(struct hal2_card *hal2) | 
 | { | 
 | 	struct hal2_codec *dac = &hal2->dac; | 
 | 	struct hal2_pbus *pbus = &dac->pbus; | 
 |  | 
 | 	pbus->pbus->pbdma_dptr = hal2_desc_addr(dac, dac->tail); | 
 | 	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; | 
 | 	/* enable DAC */ | 
 | 	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); | 
 | } | 
 |  | 
 | static void hal2_start_adc(struct hal2_card *hal2) | 
 | { | 
 | 	struct hal2_codec *adc = &hal2->adc; | 
 | 	struct hal2_pbus *pbus = &adc->pbus; | 
 |  | 
 | 	pbus->pbus->pbdma_dptr = hal2_desc_addr(adc, adc->head); | 
 | 	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; | 
 | 	/* enable ADC */ | 
 | 	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); | 
 | } | 
 |  | 
 | static inline void hal2_stop_dac(struct hal2_card *hal2) | 
 | { | 
 | 	hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; | 
 | 	/* The HAL2 itself may remain enabled safely */ | 
 | } | 
 |  | 
 | static inline void hal2_stop_adc(struct hal2_card *hal2) | 
 | { | 
 | 	hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; | 
 | } | 
 |  | 
 | static int hal2_alloc_dmabuf(struct hal2_codec *codec, int size, | 
 | 			     int count, int cntinfo, int dir) | 
 | { | 
 | 	struct hal2_desc *desc, *dma_addr; | 
 | 	int i; | 
 |  | 
 | 	DEBUG("allocating %dk DMA buffer.\n", size / 1024); | 
 |  | 
 | 	codec->buffer = (unsigned char *)__get_free_pages(GFP_KERNEL | GFP_DMA, | 
 | 							  get_order(size)); | 
 | 	if (!codec->buffer) | 
 | 		return -ENOMEM; | 
 | 	desc = dma_alloc_coherent(NULL, count * sizeof(struct hal2_desc), | 
 | 				  (dma_addr_t *)&dma_addr, GFP_KERNEL); | 
 | 	if (!desc) { | 
 | 		free_pages((unsigned long)codec->buffer, get_order(size)); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	codec->desc = desc; | 
 | 	for (i = 0; i < count; i++) { | 
 | 		desc->desc.pbuf = dma_map_single(NULL, | 
 | 			(void *)(codec->buffer + i * H2_BLOCK_SIZE), | 
 | 			H2_BLOCK_SIZE, dir); | 
 | 		desc->desc.cntinfo = cntinfo; | 
 | 		desc->desc.pnext = (i == count - 1) ? | 
 | 				   (u32)dma_addr : (u32)(dma_addr + i + 1); | 
 | 		desc->cnt = 0; | 
 | 		desc++; | 
 | 	} | 
 | 	codec->desc_count = count; | 
 | 	codec->head = codec->tail = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hal2_alloc_dac_dmabuf(struct hal2_codec *codec) | 
 | { | 
 | 	return hal2_alloc_dmabuf(codec, H2_DAC_BUFSIZE, | 
 | 				 H2_DAC_BUFSIZE / H2_BLOCK_SIZE, | 
 | 				 HPCDMA_XIE | HPCDMA_EOX, | 
 | 				 DMA_TO_DEVICE); | 
 | } | 
 |  | 
 | static int hal2_alloc_adc_dmabuf(struct hal2_codec *codec) | 
 | { | 
 | 	return hal2_alloc_dmabuf(codec, H2_ADC_BUFSIZE, | 
 | 				 H2_ADC_BUFSIZE / H2_BLOCK_SIZE, | 
 | 				 HPCDMA_XIE | H2_BLOCK_SIZE, | 
 | 				 DMA_TO_DEVICE); | 
 | } | 
 |  | 
 | static void hal2_free_dmabuf(struct hal2_codec *codec, int size, int dir) | 
 | { | 
 | 	dma_addr_t dma_addr; | 
 | 	int i; | 
 |  | 
 | 	dma_addr = codec->desc[codec->desc_count - 1].desc.pnext; | 
 | 	for (i = 0; i < codec->desc_count; i++) | 
 | 		dma_unmap_single(NULL, codec->desc[i].desc.pbuf, | 
 | 				 H2_BLOCK_SIZE, dir); | 
 | 	dma_free_coherent(NULL, codec->desc_count * sizeof(struct hal2_desc), | 
 | 			  (void *)codec->desc, dma_addr); | 
 | 	free_pages((unsigned long)codec->buffer, get_order(size)); | 
 | } | 
 |  | 
 | static void hal2_free_dac_dmabuf(struct hal2_codec *codec) | 
 | { | 
 | 	return hal2_free_dmabuf(codec, H2_DAC_BUFSIZE, DMA_TO_DEVICE); | 
 | } | 
 |  | 
 | static void hal2_free_adc_dmabuf(struct hal2_codec *codec) | 
 | { | 
 | 	return hal2_free_dmabuf(codec, H2_ADC_BUFSIZE, DMA_FROM_DEVICE); | 
 | } | 
 |  | 
 | /*  | 
 |  * Add 'count' bytes to 'buffer' from DMA ring buffers. Return number of | 
 |  * bytes added or -EFAULT if copy_from_user failed. | 
 |  */ | 
 | static int hal2_get_buffer(struct hal2_card *hal2, char *buffer, int count) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int size, ret = 0; | 
 | 	unsigned char *buf; | 
 | 	struct hal2_desc *tail; | 
 | 	struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 	DEBUG("getting %d bytes ", count); | 
 |  | 
 | 	spin_lock_irqsave(&adc->lock, flags); | 
 | 	tail = &adc->desc[adc->tail]; | 
 | 	/* enable DMA stream if there are no data */ | 
 | 	if (!tail->cnt && !(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) | 
 | 		hal2_start_adc(hal2); | 
 | 	while (tail->cnt > 0 && count > 0) { | 
 | 		size = min((int)tail->cnt, count); | 
 | 		buf = &adc->buffer[(adc->tail + 1) * H2_BLOCK_SIZE - tail->cnt]; | 
 | 		spin_unlock_irqrestore(&adc->lock, flags); | 
 | 		dma_sync_single(NULL, tail->desc.pbuf, size, DMA_FROM_DEVICE); | 
 | 		if (copy_to_user(buffer, buf, size)) { | 
 | 			ret = -EFAULT; | 
 | 			goto out; | 
 | 		} | 
 | 		spin_lock_irqsave(&adc->lock, flags); | 
 | 		tail->cnt -= size; | 
 | 		/* buffer is empty, update tail pointer */ | 
 | 		if (tail->cnt == 0) { | 
 | 			tail->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE; | 
 | 			hal2_inc_tail(adc); | 
 | 			tail = &adc->desc[adc->tail]; | 
 | 			/* enable DMA stream again if needed */ | 
 | 			if (!(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) | 
 | 				hal2_start_adc(hal2); | 
 | 		} | 
 | 		buffer += size; | 
 | 		ret += size; | 
 | 		count -= size; | 
 |  | 
 | 		DEBUG("(%d) ", size); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&adc->lock, flags); | 
 | out: | 
 | 	DEBUG("\n"); | 
 |  | 
 | 	return ret; | 
 | }  | 
 |  | 
 | /*  | 
 |  * Add 'count' bytes from 'buffer' to DMA ring buffers. Return number of | 
 |  * bytes added or -EFAULT if copy_from_user failed. | 
 |  */ | 
 | static int hal2_add_buffer(struct hal2_card *hal2, char *buffer, int count) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned char *buf; | 
 | 	int size, ret = 0; | 
 | 	struct hal2_desc *head; | 
 | 	struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 	DEBUG("adding %d bytes ", count); | 
 |  | 
 | 	spin_lock_irqsave(&dac->lock, flags); | 
 | 	head = &dac->desc[dac->head]; | 
 | 	while (head->cnt == 0 && count > 0) { | 
 | 		size = min((int)H2_BLOCK_SIZE, count); | 
 | 		buf = &dac->buffer[dac->head * H2_BLOCK_SIZE]; | 
 | 		spin_unlock_irqrestore(&dac->lock, flags); | 
 | 		if (copy_from_user(buf, buffer, size)) { | 
 | 			ret = -EFAULT; | 
 | 			goto out; | 
 | 		} | 
 | 		dma_sync_single(NULL, head->desc.pbuf, size, DMA_TO_DEVICE); | 
 | 		spin_lock_irqsave(&dac->lock, flags); | 
 | 		head->desc.cntinfo = size | HPCDMA_XIE; | 
 | 		head->cnt = size; | 
 | 		buffer += size; | 
 | 		ret += size; | 
 | 		count -= size; | 
 | 		hal2_inc_head(dac); | 
 | 		head = &dac->desc[dac->head]; | 
 |  | 
 | 		DEBUG("(%d) ", size); | 
 | 	} | 
 | 	if (!(dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) && ret > 0) | 
 | 		hal2_start_dac(hal2); | 
 | 	spin_unlock_irqrestore(&dac->lock, flags); | 
 | out: | 
 | 	DEBUG("\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | #define hal2_reset_dac_pointer(hal2)	hal2_reset_pointer(hal2, 1) | 
 | #define hal2_reset_adc_pointer(hal2)	hal2_reset_pointer(hal2, 0) | 
 | static void hal2_reset_pointer(struct hal2_card *hal2, int is_dac) | 
 | { | 
 | 	int i; | 
 | 	struct hal2_codec *codec = (is_dac) ? &hal2->dac : &hal2->adc; | 
 |  | 
 | 	DEBUG("hal2_reset_pointer\n"); | 
 |  | 
 | 	for (i = 0; i < codec->desc_count; i++) { | 
 | 		codec->desc[i].cnt = 0; | 
 | 		codec->desc[i].desc.cntinfo = HPCDMA_XIE | (is_dac) ? | 
 | 					      HPCDMA_EOX : H2_BLOCK_SIZE; | 
 | 	} | 
 | 	codec->head = codec->tail = 0; | 
 | } | 
 |  | 
 | static int hal2_sync_dac(struct hal2_card *hal2) | 
 | { | 
 | 	DECLARE_WAITQUEUE(wait, current); | 
 | 	struct hal2_codec *dac = &hal2->dac; | 
 | 	int ret = 0; | 
 | 	unsigned long flags; | 
 | 	signed long timeout = 1000 * H2_BLOCK_SIZE * 2 * dac->voices * | 
 | 			      HZ / dac->sample_rate / 900; | 
 |  | 
 | 	while (dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) { | 
 | 		add_wait_queue(&dac->dma_wait, &wait); | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 | 		schedule_timeout(timeout); | 
 | 		spin_lock_irqsave(&dac->lock, flags); | 
 | 		if (dac->desc[dac->tail].cnt) | 
 | 			ret = -ETIME; | 
 | 		spin_unlock_irqrestore(&dac->lock, flags); | 
 | 		if (signal_pending(current)) | 
 | 			ret = -ERESTARTSYS; | 
 | 		if (ret) { | 
 | 			hal2_stop_dac(hal2); | 
 | 			hal2_reset_dac_pointer(hal2); | 
 | 		} | 
 | 		remove_wait_queue(&dac->dma_wait, &wait); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int hal2_write_mixer(struct hal2_card *hal2, int index, int vol) | 
 | { | 
 | 	unsigned int l, r, tmp; | 
 |  | 
 | 	DEBUG_MIX("mixer %d write\n", index); | 
 |  | 
 | 	if (index >= SOUND_MIXER_NRDEVICES || !mixtable[index].avail) | 
 | 		return -EINVAL; | 
 |  | 
 | 	r = (vol >> 8) & 0xff; | 
 | 	if (r > 100) | 
 | 		r = 100; | 
 | 	l = vol & 0xff; | 
 | 	if (l > 100) | 
 | 		l = 100; | 
 |  | 
 | 	hal2->mixer.volume[mixtable[index].idx] = l | (r << 8); | 
 |  | 
 | 	switch (mixtable[index].idx) { | 
 | 	case H2_MIX_OUTPUT_ATT: | 
 |  | 
 | 		DEBUG_MIX("output attenuator %d,%d\n", l, r); | 
 |  | 
 | 		if (r | l) { | 
 | 			tmp = hal2_i_look32(hal2, H2I_DAC_C2); | 
 | 			tmp &= ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE); | 
 |  | 
 | 			/* Attenuator has five bits */ | 
 | 			l = 31 * (100 - l) / 99; | 
 | 			r = 31 * (100 - r) / 99; | 
 |  | 
 | 			DEBUG_MIX("left: %d, right %d\n", l, r); | 
 |  | 
 | 			tmp |= (l << H2I_C2_L_ATT_SHIFT) & H2I_C2_L_ATT_M; | 
 | 			tmp |= (r << H2I_C2_R_ATT_SHIFT) & H2I_C2_R_ATT_M; | 
 | 			hal2_i_write32(hal2, H2I_DAC_C2, tmp); | 
 | 		} else  | 
 | 			hal2_i_setbit32(hal2, H2I_DAC_C2, H2I_C2_MUTE); | 
 | 		break; | 
 | 	case H2_MIX_INPUT_GAIN: | 
 |  | 
 | 		DEBUG_MIX("input gain %d,%d\n", l, r); | 
 |  | 
 | 		tmp = hal2_i_look32(hal2, H2I_ADC_C2); | 
 | 		tmp &= ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M); | 
 |  | 
 | 		/* Gain control has four bits */ | 
 | 		l = 16 * l / 100; | 
 | 		r = 16 * r / 100; | 
 |  | 
 | 		DEBUG_MIX("left: %d, right %d\n", l, r); | 
 |  | 
 | 		tmp |= (l << H2I_C2_L_GAIN_SHIFT) & H2I_C2_L_GAIN_M; | 
 | 		tmp |= (r << H2I_C2_R_GAIN_SHIFT) & H2I_C2_R_GAIN_M; | 
 | 		hal2_i_write32(hal2, H2I_ADC_C2, tmp); | 
 |  | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void hal2_init_mixer(struct hal2_card *hal2) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) | 
 | 		if (mixtable[i].avail) | 
 | 			hal2->mixer.volume[mixtable[i].idx] = 100 | (100 << 8); | 
 |  | 
 | 	/* disable attenuator */ | 
 | 	hal2_i_write32(hal2, H2I_DAC_C2, 0); | 
 | 	/* set max input gain */ | 
 | 	hal2_i_write32(hal2, H2I_ADC_C2, H2I_C2_MUTE | | 
 | 			(H2I_C2_L_GAIN_M << H2I_C2_L_GAIN_SHIFT) | | 
 | 			(H2I_C2_R_GAIN_M << H2I_C2_R_GAIN_SHIFT)); | 
 | 	/* set max volume */ | 
 | 	hal2->mixer.master = 0xff; | 
 | 	hal2->vol_regs->left = 0xff; | 
 | 	hal2->vol_regs->right = 0xff; | 
 | } | 
 |  | 
 | /* | 
 |  * XXX: later i'll implement mixer for main volume which will be disabled | 
 |  * by default. enabling it users will be allowed to have master volume level | 
 |  * control on panel in their favourite X desktop | 
 |  */ | 
 | static void hal2_volume_control(int direction) | 
 | { | 
 | 	unsigned int master = hal2_card[0]->mixer.master; | 
 | 	struct hal2_vol_regs *vol = hal2_card[0]->vol_regs; | 
 |  | 
 | 	/* volume up */ | 
 | 	if (direction > 0 && master < 0xff) | 
 | 		master++; | 
 | 	/* volume down */ | 
 | 	else if (direction < 0 && master > 0) | 
 | 		master--; | 
 | 	/* TODO: mute/unmute */ | 
 | 	vol->left = master; | 
 | 	vol->right = master; | 
 | 	hal2_card[0]->mixer.master = master; | 
 | } | 
 |  | 
 | static int hal2_mixer_ioctl(struct hal2_card *hal2, unsigned int cmd, | 
 | 			    unsigned long arg) | 
 | { | 
 | 	int val; | 
 |  | 
 |         if (cmd == SOUND_MIXER_INFO) { | 
 | 		mixer_info info; | 
 |  | 
 | 		memset(&info, 0, sizeof(info)); | 
 | 		strlcpy(info.id, hal2str, sizeof(info.id)); | 
 | 		strlcpy(info.name, hal2str, sizeof(info.name)); | 
 | 		info.modify_counter = hal2->mixer.modcnt; | 
 | 		if (copy_to_user((void *)arg, &info, sizeof(info))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	} | 
 | 	if (cmd == SOUND_OLD_MIXER_INFO) { | 
 | 		_old_mixer_info info; | 
 |  | 
 | 		memset(&info, 0, sizeof(info)); | 
 | 		strlcpy(info.id, hal2str, sizeof(info.id)); | 
 | 		strlcpy(info.name, hal2str, sizeof(info.name)); | 
 | 		if (copy_to_user((void *)arg, &info, sizeof(info))) | 
 | 			return -EFAULT; | 
 | 		return 0; | 
 | 	} | 
 | 	if (cmd == OSS_GETVERSION) | 
 | 		return put_user(SOUND_VERSION, (int *)arg); | 
 |  | 
 | 	if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int)) | 
 |                 return -EINVAL; | 
 |  | 
 |         if (_IOC_DIR(cmd) == _IOC_READ) { | 
 |                 switch (_IOC_NR(cmd)) { | 
 | 		/* Give the current record source */ | 
 | 		case SOUND_MIXER_RECSRC: | 
 | 			val = 0;	/* FIXME */ | 
 | 			break; | 
 | 		/* Give the supported mixers, all of them support stereo */ | 
 |                 case SOUND_MIXER_DEVMASK: | 
 |                 case SOUND_MIXER_STEREODEVS: { | 
 | 			int i; | 
 |  | 
 | 			for (val = i = 0; i < SOUND_MIXER_NRDEVICES; i++) | 
 | 				if (mixtable[i].avail) | 
 | 					val |= 1 << i; | 
 | 			break; | 
 | 			} | 
 | 		/* Arg contains a bit for each supported recording source */ | 
 |                 case SOUND_MIXER_RECMASK: | 
 | 			val = 0; | 
 | 			break; | 
 |                 case SOUND_MIXER_CAPS: | 
 | 			val = 0; | 
 | 			break; | 
 | 		/* Read a specific mixer */ | 
 | 		default: { | 
 | 			int i = _IOC_NR(cmd); | 
 |  | 
 | 			if (i >= SOUND_MIXER_NRDEVICES || !mixtable[i].avail) | 
 | 				return -EINVAL; | 
 | 			val = hal2->mixer.volume[mixtable[i].idx]; | 
 | 			break; | 
 | 			} | 
 | 		} | 
 | 		return put_user(val, (int *)arg); | 
 | 	} | 
 |  | 
 |         if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	hal2->mixer.modcnt++; | 
 |  | 
 | 	if (get_user(val, (int *)arg)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	switch (_IOC_NR(cmd)) { | 
 | 	/* Arg contains a bit for each recording source */ | 
 | 	case SOUND_MIXER_RECSRC: | 
 | 		return 0;	/* FIXME */ | 
 | 	default: | 
 | 		return hal2_write_mixer(hal2, _IOC_NR(cmd), val); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hal2_open_mixdev(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct hal2_card *hal2 = hal2_mixer_find_card(iminor(inode)); | 
 |  | 
 | 	if (hal2) { | 
 | 		file->private_data = hal2; | 
 | 		return nonseekable_open(inode, file); | 
 | 	} | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | static int hal2_release_mixdev(struct inode *inode, struct file *file) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hal2_ioctl_mixdev(struct inode *inode, struct file *file, | 
 | 			     unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	return hal2_mixer_ioctl((struct hal2_card *)file->private_data, cmd, arg); | 
 | } | 
 |  | 
 | static int hal2_ioctl(struct inode *inode, struct file *file,  | 
 | 		      unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	int val; | 
 | 	struct hal2_card *hal2 = (struct hal2_card *) file->private_data; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case OSS_GETVERSION: | 
 | 		return put_user(SOUND_VERSION, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_SYNC: | 
 | 		if (file->f_mode & FMODE_WRITE) | 
 | 			return hal2_sync_dac(hal2); | 
 | 		return 0; | 
 |  | 
 | 	case SNDCTL_DSP_SETDUPLEX: | 
 | 		return 0; | 
 |  | 
 | 	case SNDCTL_DSP_GETCAPS: | 
 | 		return put_user(DSP_CAP_DUPLEX | DSP_CAP_MULTI, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_RESET: | 
 | 		if (file->f_mode & FMODE_READ) { | 
 | 			hal2_stop_adc(hal2); | 
 | 			hal2_reset_adc_pointer(hal2); | 
 | 		} | 
 | 		if (file->f_mode & FMODE_WRITE) { | 
 | 			hal2_stop_dac(hal2); | 
 | 			hal2_reset_dac_pointer(hal2); | 
 | 		} | 
 | 		return 0; | 
 |  | 
 |  	case SNDCTL_DSP_SPEED: | 
 | 		if (get_user(val, (int *)arg)) | 
 | 			return -EFAULT; | 
 | 		if (file->f_mode & FMODE_READ) { | 
 | 			hal2_stop_adc(hal2); | 
 | 			val = hal2_compute_rate(&hal2->adc, val); | 
 | 			hal2->adc.sample_rate = val; | 
 | 			hal2_set_adc_rate(hal2); | 
 | 		} | 
 | 		if (file->f_mode & FMODE_WRITE) { | 
 | 			hal2_stop_dac(hal2); | 
 | 			val = hal2_compute_rate(&hal2->dac, val); | 
 | 			hal2->dac.sample_rate = val; | 
 | 			hal2_set_dac_rate(hal2); | 
 | 		} | 
 | 		return put_user(val, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_STEREO: | 
 | 		if (get_user(val, (int *)arg)) | 
 | 			return -EFAULT; | 
 | 		if (file->f_mode & FMODE_READ) { | 
 | 			hal2_stop_adc(hal2); | 
 | 			hal2->adc.voices = (val) ? 2 : 1; | 
 | 			hal2_setup_adc(hal2); | 
 | 		} | 
 | 		if (file->f_mode & FMODE_WRITE) { | 
 | 			hal2_stop_dac(hal2); | 
 | 			hal2->dac.voices = (val) ? 2 : 1; | 
 | 			hal2_setup_dac(hal2); | 
 |                 } | 
 | 		return 0; | 
 |  | 
 | 	case SNDCTL_DSP_CHANNELS: | 
 | 		if (get_user(val, (int *)arg)) | 
 | 			return -EFAULT; | 
 | 		if (val != 0) { | 
 | 			if (file->f_mode & FMODE_READ) { | 
 | 				hal2_stop_adc(hal2); | 
 | 				hal2->adc.voices = (val == 1) ? 1 : 2; | 
 | 				hal2_setup_adc(hal2); | 
 | 			} | 
 | 			if (file->f_mode & FMODE_WRITE) { | 
 | 				hal2_stop_dac(hal2); | 
 | 				hal2->dac.voices = (val == 1) ? 1 : 2; | 
 | 				hal2_setup_dac(hal2); | 
 | 			} | 
 | 		} | 
 | 		val = -EINVAL; | 
 | 		if (file->f_mode & FMODE_READ) | 
 | 			val = hal2->adc.voices; | 
 | 		if (file->f_mode & FMODE_WRITE) | 
 | 			val = hal2->dac.voices; | 
 | 		return put_user(val, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_GETFMTS: /* Returns a mask */ | 
 |                 return put_user(H2_SUPPORTED_FORMATS, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ | 
 | 		if (get_user(val, (int *)arg)) | 
 | 			return -EFAULT; | 
 | 		if (val != AFMT_QUERY) { | 
 | 			if (!(val & H2_SUPPORTED_FORMATS)) | 
 | 				return -EINVAL; | 
 | 			if (file->f_mode & FMODE_READ) { | 
 | 				hal2_stop_adc(hal2); | 
 | 				hal2->adc.format = val; | 
 | 				hal2_setup_adc(hal2); | 
 | 			} | 
 | 			if (file->f_mode & FMODE_WRITE) { | 
 | 				hal2_stop_dac(hal2); | 
 | 				hal2->dac.format = val; | 
 | 				hal2_setup_dac(hal2); | 
 | 			} | 
 | 		} else { | 
 | 			val = -EINVAL; | 
 | 			if (file->f_mode & FMODE_READ) | 
 | 				val = hal2->adc.format; | 
 | 			if (file->f_mode & FMODE_WRITE) | 
 | 				val = hal2->dac.format; | 
 | 		} | 
 | 		return put_user(val, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_POST: | 
 | 		return 0; | 
 |  | 
 | 	case SNDCTL_DSP_GETOSPACE: { | 
 | 		audio_buf_info info; | 
 | 		int i; | 
 | 		unsigned long flags; | 
 | 		struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 		if (!(file->f_mode & FMODE_WRITE)) | 
 | 			return -EINVAL; | 
 | 		info.fragments = 0; | 
 | 		spin_lock_irqsave(&dac->lock, flags); | 
 | 		for (i = 0; i < dac->desc_count; i++) | 
 | 			if (dac->desc[i].cnt == 0) | 
 | 				info.fragments++; | 
 | 		spin_unlock_irqrestore(&dac->lock, flags); | 
 | 		info.fragstotal = dac->desc_count; | 
 | 		info.fragsize = H2_BLOCK_SIZE; | 
 |                 info.bytes = info.fragsize * info.fragments; | 
 |  | 
 | 		return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; | 
 | 	} | 
 |  | 
 | 	case SNDCTL_DSP_GETISPACE: { | 
 | 		audio_buf_info info; | 
 | 		int i; | 
 | 		unsigned long flags; | 
 | 		struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 		if (!(file->f_mode & FMODE_READ)) | 
 | 			return -EINVAL; | 
 | 		info.fragments = 0; | 
 | 		info.bytes = 0; | 
 | 		spin_lock_irqsave(&adc->lock, flags); | 
 | 		for (i = 0; i < adc->desc_count; i++) | 
 | 			if (adc->desc[i].cnt > 0) { | 
 | 				info.fragments++; | 
 | 				info.bytes += adc->desc[i].cnt; | 
 | 			} | 
 | 		spin_unlock_irqrestore(&adc->lock, flags); | 
 | 		info.fragstotal = adc->desc_count; | 
 | 		info.fragsize = H2_BLOCK_SIZE; | 
 |  | 
 | 		return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; | 
 | 	} | 
 |  | 
 | 	case SNDCTL_DSP_NONBLOCK: | 
 | 		file->f_flags |= O_NONBLOCK; | 
 | 		return 0; | 
 |  | 
 | 	case SNDCTL_DSP_GETBLKSIZE: | 
 | 		return put_user(H2_BLOCK_SIZE, (int *)arg); | 
 |  | 
 | 	case SNDCTL_DSP_SETFRAGMENT: | 
 | 		return 0; | 
 |  | 
 | 	case SOUND_PCM_READ_RATE: | 
 | 		val = -EINVAL; | 
 | 		if (file->f_mode & FMODE_READ) | 
 | 			val = hal2->adc.sample_rate; | 
 | 		if (file->f_mode & FMODE_WRITE) | 
 | 			val = hal2->dac.sample_rate; | 
 | 		return put_user(val, (int *)arg); | 
 |  | 
 | 	case SOUND_PCM_READ_CHANNELS: | 
 | 		val = -EINVAL; | 
 | 		if (file->f_mode & FMODE_READ) | 
 | 			val = hal2->adc.voices; | 
 | 		if (file->f_mode & FMODE_WRITE) | 
 | 			val = hal2->dac.voices; | 
 | 		return put_user(val, (int *)arg); | 
 |  | 
 | 	case SOUND_PCM_READ_BITS: | 
 | 		return put_user(16, (int *)arg); | 
 | 	} | 
 |  | 
 | 	return hal2_mixer_ioctl(hal2, cmd, arg); | 
 | } | 
 |  | 
 | static ssize_t hal2_read(struct file *file, char *buffer, | 
 | 			 size_t count, loff_t *ppos) | 
 | { | 
 | 	ssize_t err; | 
 | 	struct hal2_card *hal2 = (struct hal2_card *) file->private_data; | 
 | 	struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 	if (!count) | 
 | 		return 0; | 
 | 	if (mutex_lock_interruptible(&adc->sem)) | 
 | 		return -EINTR; | 
 | 	if (file->f_flags & O_NONBLOCK) { | 
 | 		err = hal2_get_buffer(hal2, buffer, count); | 
 | 		err = err == 0 ? -EAGAIN : err; | 
 | 	} else { | 
 | 		do { | 
 | 			/* ~10% longer */ | 
 | 			signed long timeout = 1000 * H2_BLOCK_SIZE * | 
 | 				2 * adc->voices * HZ / adc->sample_rate / 900; | 
 | 			unsigned long flags; | 
 | 			DECLARE_WAITQUEUE(wait, current); | 
 | 			ssize_t cnt = 0; | 
 |  | 
 | 			err = hal2_get_buffer(hal2, buffer, count); | 
 | 			if (err > 0) { | 
 | 				count -= err; | 
 | 				cnt += err; | 
 | 				buffer += err; | 
 | 				err = cnt; | 
 | 			} | 
 | 			if (count > 0 && err >= 0) { | 
 | 				add_wait_queue(&adc->dma_wait, &wait); | 
 | 				set_current_state(TASK_INTERRUPTIBLE); | 
 | 				schedule_timeout(timeout); | 
 | 				spin_lock_irqsave(&adc->lock, flags); | 
 | 				if (!adc->desc[adc->tail].cnt) | 
 | 					err = -EAGAIN; | 
 | 				spin_unlock_irqrestore(&adc->lock, flags); | 
 | 				if (signal_pending(current)) | 
 | 					err = -ERESTARTSYS; | 
 | 				remove_wait_queue(&adc->dma_wait, &wait); | 
 | 				if (err < 0) { | 
 | 					hal2_stop_adc(hal2); | 
 | 					hal2_reset_adc_pointer(hal2); | 
 | 				} | 
 | 			} | 
 | 		} while (count > 0 && err >= 0); | 
 | 	} | 
 | 	mutex_unlock(&adc->sem); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static ssize_t hal2_write(struct file *file, const char *buffer, | 
 | 			  size_t count, loff_t *ppos) | 
 | { | 
 | 	ssize_t err; | 
 | 	char *buf = (char*) buffer; | 
 | 	struct hal2_card *hal2 = (struct hal2_card *) file->private_data; | 
 | 	struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 	if (!count) | 
 | 		return 0; | 
 | 	if (mutex_lock_interruptible(&dac->sem)) | 
 | 		return -EINTR; | 
 | 	if (file->f_flags & O_NONBLOCK) { | 
 | 		err = hal2_add_buffer(hal2, buf, count); | 
 | 		err = err == 0 ? -EAGAIN : err; | 
 | 	} else { | 
 | 		do { | 
 | 			/* ~10% longer */ | 
 | 			signed long timeout = 1000 * H2_BLOCK_SIZE * | 
 | 				2 * dac->voices * HZ / dac->sample_rate / 900; | 
 | 			unsigned long flags; | 
 | 			DECLARE_WAITQUEUE(wait, current); | 
 | 			ssize_t cnt = 0; | 
 |  | 
 | 			err = hal2_add_buffer(hal2, buf, count); | 
 | 			if (err > 0) { | 
 | 				count -= err; | 
 | 				cnt += err; | 
 | 				buf += err; | 
 | 				err = cnt; | 
 | 			} | 
 | 			if (count > 0 && err >= 0) { | 
 | 				add_wait_queue(&dac->dma_wait, &wait); | 
 | 				set_current_state(TASK_INTERRUPTIBLE); | 
 | 				schedule_timeout(timeout); | 
 | 				spin_lock_irqsave(&dac->lock, flags); | 
 | 				if (dac->desc[dac->head].cnt) | 
 | 					err = -EAGAIN; | 
 | 				spin_unlock_irqrestore(&dac->lock, flags); | 
 | 				if (signal_pending(current)) | 
 | 					err = -ERESTARTSYS; | 
 | 				remove_wait_queue(&dac->dma_wait, &wait); | 
 | 				if (err < 0) { | 
 | 					hal2_stop_dac(hal2); | 
 | 					hal2_reset_dac_pointer(hal2); | 
 | 				} | 
 | 			} | 
 | 		} while (count > 0 && err >= 0); | 
 | 	} | 
 | 	mutex_unlock(&dac->sem); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static unsigned int hal2_poll(struct file *file, struct poll_table_struct *wait) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned int mask = 0; | 
 | 	struct hal2_card *hal2 = (struct hal2_card *) file->private_data; | 
 |  | 
 | 	if (file->f_mode & FMODE_READ) { | 
 | 		struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 		poll_wait(file, &adc->dma_wait, wait); | 
 | 		spin_lock_irqsave(&adc->lock, flags); | 
 | 		if (adc->desc[adc->tail].cnt > 0) | 
 | 			mask |= POLLIN; | 
 | 		spin_unlock_irqrestore(&adc->lock, flags); | 
 | 	} | 
 |  | 
 | 	if (file->f_mode & FMODE_WRITE) { | 
 | 		struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 		poll_wait(file, &dac->dma_wait, wait); | 
 | 		spin_lock_irqsave(&dac->lock, flags); | 
 | 		if (dac->desc[dac->head].cnt == 0) | 
 | 			mask |= POLLOUT; | 
 | 		spin_unlock_irqrestore(&dac->lock, flags); | 
 | 	} | 
 |  | 
 | 	return mask; | 
 | } | 
 |  | 
 | static int hal2_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	int err; | 
 | 	struct hal2_card *hal2 = hal2_dsp_find_card(iminor(inode)); | 
 |  | 
 | 	if (!hal2) | 
 | 		return -ENODEV; | 
 | 	file->private_data = hal2; | 
 | 	if (file->f_mode & FMODE_READ) { | 
 | 		struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 		if (adc->usecount) | 
 | 			return -EBUSY; | 
 | 		/* OSS spec wanted us to use 8 bit, 8 kHz mono by default, | 
 | 		 * but HAL2 can't do 8bit audio */ | 
 | 		adc->format = AFMT_S16_BE; | 
 | 		adc->voices = 1; | 
 | 		adc->sample_rate = hal2_compute_rate(adc, 8000); | 
 | 		hal2_set_adc_rate(hal2); | 
 | 		err = hal2_alloc_adc_dmabuf(adc); | 
 | 		if (err) | 
 | 			return err; | 
 | 		hal2_setup_adc(hal2); | 
 | 		adc->usecount++; | 
 | 	} | 
 | 	if (file->f_mode & FMODE_WRITE) { | 
 | 		struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 		if (dac->usecount) | 
 | 			return -EBUSY; | 
 | 		dac->format = AFMT_S16_BE; | 
 | 		dac->voices = 1; | 
 | 		dac->sample_rate = hal2_compute_rate(dac, 8000); | 
 | 		hal2_set_dac_rate(hal2); | 
 | 		err = hal2_alloc_dac_dmabuf(dac); | 
 | 		if (err) | 
 | 			return err; | 
 | 		hal2_setup_dac(hal2); | 
 | 		dac->usecount++; | 
 | 	} | 
 |  | 
 | 	return nonseekable_open(inode, file); | 
 | } | 
 |  | 
 | static int hal2_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct hal2_card *hal2 = (struct hal2_card *) file->private_data; | 
 |  | 
 | 	if (file->f_mode & FMODE_READ) { | 
 | 		struct hal2_codec *adc = &hal2->adc; | 
 |  | 
 | 		mutex_lock(&adc->sem); | 
 | 		hal2_stop_adc(hal2); | 
 | 		hal2_free_adc_dmabuf(adc); | 
 | 		adc->usecount--; | 
 | 		mutex_unlock(&adc->sem); | 
 | 	} | 
 | 	if (file->f_mode & FMODE_WRITE) { | 
 | 		struct hal2_codec *dac = &hal2->dac; | 
 |  | 
 | 		mutex_lock(&dac->sem); | 
 | 		hal2_sync_dac(hal2); | 
 | 		hal2_free_dac_dmabuf(dac); | 
 | 		dac->usecount--; | 
 | 		mutex_unlock(&dac->sem); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct file_operations hal2_audio_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.read		= hal2_read, | 
 | 	.write		= hal2_write, | 
 | 	.poll		= hal2_poll, | 
 | 	.ioctl		= hal2_ioctl, | 
 | 	.open		= hal2_open, | 
 | 	.release	= hal2_release, | 
 | }; | 
 |  | 
 | static const struct file_operations hal2_mixer_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.ioctl		= hal2_ioctl_mixdev, | 
 | 	.open		= hal2_open_mixdev, | 
 | 	.release	= hal2_release_mixdev, | 
 | }; | 
 |  | 
 | static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3, | 
 | 			    int index) | 
 | { | 
 | 	codec->pbus.pbusnr = index; | 
 | 	codec->pbus.pbus = &hpc3->pbdma[index]; | 
 | 	init_waitqueue_head(&codec->dma_wait); | 
 | 	mutex_init(&codec->sem); | 
 | 	spin_lock_init(&codec->lock); | 
 | } | 
 |  | 
 | static int hal2_detect(struct hal2_card *hal2) | 
 | { | 
 | 	unsigned short board, major, minor; | 
 | 	unsigned short rev; | 
 |  | 
 | 	/* reset HAL2 */ | 
 | 	hal2_isr_write(hal2, 0); | 
 | 	/* release reset */ | 
 | 	hal2_isr_write(hal2, H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N); | 
 |  | 
 | 	hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);  | 
 | 	if ((rev = hal2_rev_look(hal2)) & H2_REV_AUDIO_PRESENT) | 
 | 		return -ENODEV; | 
 |  | 
 | 	board = (rev & H2_REV_BOARD_M) >> 12; | 
 | 	major = (rev & H2_REV_MAJOR_CHIP_M) >> 4; | 
 | 	minor = (rev & H2_REV_MINOR_CHIP_M); | 
 |  | 
 | 	printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n", | 
 | 	       board, major, minor); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hal2_init_card(struct hal2_card **phal2, struct hpc3_regs *hpc3) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct hal2_card *hal2; | 
 |  | 
 | 	hal2 = kzalloc(sizeof(struct hal2_card), GFP_KERNEL); | 
 | 	if (!hal2) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0]; | 
 | 	hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1]; | 
 | 	hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2]; | 
 | 	hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3]; | 
 |  | 
 | 	if (hal2_detect(hal2) < 0) { | 
 | 		ret = -ENODEV; | 
 | 		goto free_card; | 
 | 	} | 
 |  | 
 | 	hal2_init_codec(&hal2->dac, hpc3, 0); | 
 | 	hal2_init_codec(&hal2->adc, hpc3, 1); | 
 |  | 
 | 	/* | 
 | 	 * All DMA channel interfaces in HAL2 are designed to operate with | 
 | 	 * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles | 
 | 	 * in D5. HAL2 is a 16-bit device which can accept both big and little | 
 | 	 * endian format. It assumes that even address bytes are on high | 
 | 	 * portion of PBUS (15:8) and assumes that HPC3 is programmed to | 
 | 	 * accept a live (unsynchronized) version of P_DREQ_N from HAL2. | 
 | 	 */ | 
 | #define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \ | 
 | 			  (2 << HPC3_DMACFG_D4R_SHIFT) | \ | 
 | 			  (2 << HPC3_DMACFG_D5R_SHIFT) | \ | 
 | 			  (0 << HPC3_DMACFG_D3W_SHIFT) | \ | 
 | 			  (2 << HPC3_DMACFG_D4W_SHIFT) | \ | 
 | 			  (2 << HPC3_DMACFG_D5W_SHIFT) | \ | 
 | 				HPC3_DMACFG_DS16 | \ | 
 | 				HPC3_DMACFG_EVENHI | \ | 
 | 				HPC3_DMACFG_RTIME | \ | 
 | 			  (8 << HPC3_DMACFG_BURST_SHIFT) | \ | 
 | 				HPC3_DMACFG_DRQLIVE) | 
 | 	/* | 
 | 	 * Ignore what's mentioned in the specification and write value which | 
 | 	 * works in The Real World (TM) | 
 | 	 */ | 
 | 	hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844; | 
 | 	hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844; | 
 |  | 
 | 	if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED, | 
 | 			hal2str, hal2)) { | 
 | 		printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ); | 
 | 		ret = -EAGAIN; | 
 | 		goto free_card; | 
 | 	} | 
 |  | 
 | 	hal2->dev_dsp = register_sound_dsp(&hal2_audio_fops, -1); | 
 | 	if (hal2->dev_dsp < 0) { | 
 | 		ret = hal2->dev_dsp; | 
 | 		goto free_irq; | 
 | 	} | 
 |  | 
 | 	hal2->dev_mixer = register_sound_mixer(&hal2_mixer_fops, -1); | 
 | 	if (hal2->dev_mixer < 0) { | 
 | 		ret = hal2->dev_mixer; | 
 | 		goto unregister_dsp; | 
 | 	} | 
 |  | 
 | 	hal2_init_mixer(hal2); | 
 |  | 
 | 	*phal2 = hal2; | 
 | 	return 0; | 
 | unregister_dsp: | 
 | 	unregister_sound_dsp(hal2->dev_dsp); | 
 | free_irq: | 
 | 	free_irq(SGI_HPCDMA_IRQ, hal2); | 
 | free_card: | 
 | 	kfree(hal2); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | extern void (*indy_volume_button)(int); | 
 |  | 
 | /*  | 
 |  * Assuming only one HAL2 card. Mail me if you ever meet machine with | 
 |  * more than one. | 
 |  */ | 
 | static int __init init_hal2(void) | 
 | { | 
 | 	int i, error; | 
 |  | 
 | 	for (i = 0; i < MAXCARDS; i++) | 
 | 		hal2_card[i] = NULL; | 
 |  | 
 | 	error = hal2_init_card(&hal2_card[0], hpc3c0); | 
 |  | 
 | 	/* let Indy's volume buttons work */ | 
 | 	if (!error && !ip22_is_fullhouse()) | 
 | 		indy_volume_button = hal2_volume_control; | 
 |  | 
 | 	return error; | 
 |  | 
 | } | 
 |  | 
 | static void __exit exit_hal2(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* unregister volume butons callback function */ | 
 | 	indy_volume_button = NULL; | 
 | 	 | 
 | 	for (i = 0; i < MAXCARDS; i++) | 
 | 		if (hal2_card[i]) { | 
 | 			free_irq(SGI_HPCDMA_IRQ, hal2_card[i]); | 
 | 			unregister_sound_dsp(hal2_card[i]->dev_dsp); | 
 | 			unregister_sound_mixer(hal2_card[i]->dev_mixer); | 
 | 			kfree(hal2_card[i]); | 
 | 	} | 
 | } | 
 |  | 
 | module_init(init_hal2); | 
 | module_exit(exit_hal2); | 
 |  | 
 | MODULE_DESCRIPTION("OSS compatible driver for SGI HAL2 audio"); | 
 | MODULE_AUTHOR("Ladislav Michl"); | 
 | MODULE_LICENSE("GPL"); |