[MIPS] txx9tmr clockevent/clocksource driver
Convert jmr3927_clock_event_device to more generic
txx9tmr_clock_event_device which supports one-shot mode. The
txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer
interrupt was not available.
Convert jmr3927_hpt_read to txx9_clocksource driver which does not
depends jiffies anymore. The txx9_clocksource itself can be used for
TX49, but normally TX49 uses higher precision clocksource_mips.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h
index b2dc35f..81602c8 100644
--- a/include/asm-mips/jmr3927/jmr3927.h
+++ b/include/asm-mips/jmr3927/jmr3927.h
@@ -132,9 +132,7 @@
#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA)
#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO)
#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI)
-#define JMR3927_IRQ_IRC_TMR0 (JMR3927_IRQ_IRC + TX3927_IR_TMR0)
-#define JMR3927_IRQ_IRC_TMR1 (JMR3927_IRQ_IRC + TX3927_IR_TMR1)
-#define JMR3927_IRQ_IRC_TMR2 (JMR3927_IRQ_IRC + TX3927_IR_TMR2)
+#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
@@ -148,17 +146,12 @@
#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1
/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3
-/* Clock Tick (10ms) */
-#define JMR3927_IRQ_TICK JMR3927_IRQ_IRC_TMR0
/* Clocks */
#define JMR3927_CORECLK 132710400 /* 132.7MHz */
#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */
#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */
-#define jmr3927_tmrptr tx3927_tmrptr(0) /* TMR0 */
-
-
/*
* TX3927 Pin Configuration:
*