| /* | 
 |  *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify it | 
 |  *  under  the terms of the GNU General  Public License as published by the | 
 |  *  Free Software Foundation;  either version 2 of the License, or (at your | 
 |  *  option) any later version. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License along | 
 |  *  with this program; if not, write to the Free Software Foundation, Inc., | 
 |  *  675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/pm.h> | 
 |  | 
 | #include <asm/reboot.h> | 
 |  | 
 | #include <asm/mach-jz4740/base.h> | 
 | #include <asm/mach-jz4740/timer.h> | 
 |  | 
 | static void jz4740_halt(void) | 
 | { | 
 | 	while (1) { | 
 | 		__asm__(".set push;\n" | 
 | 			".set mips3;\n" | 
 | 			"wait;\n" | 
 | 			".set pop;\n" | 
 | 		); | 
 | 	} | 
 | } | 
 |  | 
 | #define JZ_REG_WDT_DATA 0x00 | 
 | #define JZ_REG_WDT_COUNTER_ENABLE 0x04 | 
 | #define JZ_REG_WDT_COUNTER 0x08 | 
 | #define JZ_REG_WDT_CTRL 0x0c | 
 |  | 
 | static void jz4740_restart(char *command) | 
 | { | 
 | 	void __iomem *wdt_base = ioremap(JZ4740_WDT_BASE_ADDR, 0x0f); | 
 |  | 
 | 	jz4740_timer_enable_watchdog(); | 
 |  | 
 | 	writeb(0, wdt_base + JZ_REG_WDT_COUNTER_ENABLE); | 
 |  | 
 | 	writew(0, wdt_base + JZ_REG_WDT_COUNTER); | 
 | 	writew(0, wdt_base + JZ_REG_WDT_DATA); | 
 | 	writew(BIT(2), wdt_base + JZ_REG_WDT_CTRL); | 
 |  | 
 | 	writeb(1, wdt_base + JZ_REG_WDT_COUNTER_ENABLE); | 
 | 	jz4740_halt(); | 
 | } | 
 |  | 
 | #define JZ_REG_RTC_CTRL		0x00 | 
 | #define JZ_REG_RTC_HIBERNATE	0x20 | 
 |  | 
 | #define JZ_RTC_CTRL_WRDY	BIT(7) | 
 |  | 
 | static void jz4740_power_off(void) | 
 | { | 
 | 	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24); | 
 | 	uint32_t ctrl; | 
 |  | 
 | 	do { | 
 | 		ctrl = readl(rtc_base + JZ_REG_RTC_CTRL); | 
 | 	} while (!(ctrl & JZ_RTC_CTRL_WRDY)); | 
 |  | 
 | 	writel(1, rtc_base + JZ_REG_RTC_HIBERNATE); | 
 | 	jz4740_halt(); | 
 | } | 
 |  | 
 | void jz4740_reset_init(void) | 
 | { | 
 | 	_machine_restart = jz4740_restart; | 
 | 	_machine_halt = jz4740_halt; | 
 | 	pm_power_off = jz4740_power_off; | 
 | } |