|  | /* | 
|  | * This file contains the routines for TLB flushing. | 
|  | * On machines where the MMU does not use a hash table to store virtual to | 
|  | * physical translations (ie, SW loaded TLBs or Book3E compilant processors, | 
|  | * this does -not- include 603 however which shares the implementation with | 
|  | * hash based processors) | 
|  | * | 
|  | *  -- BenH | 
|  | * | 
|  | * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org> | 
|  | *                     IBM Corp. | 
|  | * | 
|  | *  Derived from arch/ppc/mm/init.c: | 
|  | *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
|  | * | 
|  | *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) | 
|  | *  and Cort Dougan (PReP) (cort@cs.nmt.edu) | 
|  | *    Copyright (C) 1996 Paul Mackerras | 
|  | * | 
|  | *  Derived from "arch/i386/mm/init.c" | 
|  | *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or | 
|  | *  modify it under the terms of the GNU General Public License | 
|  | *  as published by the Free Software Foundation; either version | 
|  | *  2 of the License, or (at your option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/preempt.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/memblock.h> | 
|  |  | 
|  | #include <asm/tlbflush.h> | 
|  | #include <asm/tlb.h> | 
|  | #include <asm/code-patching.h> | 
|  |  | 
|  | #include "mmu_decl.h" | 
|  |  | 
|  | #ifdef CONFIG_PPC_BOOK3E | 
|  | struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { | 
|  | [MMU_PAGE_4K] = { | 
|  | .shift	= 12, | 
|  | .ind	= 20, | 
|  | .enc	= BOOK3E_PAGESZ_4K, | 
|  | }, | 
|  | [MMU_PAGE_16K] = { | 
|  | .shift	= 14, | 
|  | .enc	= BOOK3E_PAGESZ_16K, | 
|  | }, | 
|  | [MMU_PAGE_64K] = { | 
|  | .shift	= 16, | 
|  | .ind	= 28, | 
|  | .enc	= BOOK3E_PAGESZ_64K, | 
|  | }, | 
|  | [MMU_PAGE_1M] = { | 
|  | .shift	= 20, | 
|  | .enc	= BOOK3E_PAGESZ_1M, | 
|  | }, | 
|  | [MMU_PAGE_16M] = { | 
|  | .shift	= 24, | 
|  | .ind	= 36, | 
|  | .enc	= BOOK3E_PAGESZ_16M, | 
|  | }, | 
|  | [MMU_PAGE_256M] = { | 
|  | .shift	= 28, | 
|  | .enc	= BOOK3E_PAGESZ_256M, | 
|  | }, | 
|  | [MMU_PAGE_1G] = { | 
|  | .shift	= 30, | 
|  | .enc	= BOOK3E_PAGESZ_1GB, | 
|  | }, | 
|  | }; | 
|  | static inline int mmu_get_tsize(int psize) | 
|  | { | 
|  | return mmu_psize_defs[psize].enc; | 
|  | } | 
|  | #else | 
|  | static inline int mmu_get_tsize(int psize) | 
|  | { | 
|  | /* This isn't used on !Book3E for now */ | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* The variables below are currently only used on 64-bit Book3E | 
|  | * though this will probably be made common with other nohash | 
|  | * implementations at some point | 
|  | */ | 
|  | #ifdef CONFIG_PPC64 | 
|  |  | 
|  | int mmu_linear_psize;		/* Page size used for the linear mapping */ | 
|  | int mmu_pte_psize;		/* Page size used for PTE pages */ | 
|  | int mmu_vmemmap_psize;		/* Page size used for the virtual mem map */ | 
|  | int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */ | 
|  | unsigned long linear_map_top;	/* Top of linear mapping */ | 
|  |  | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | /* | 
|  | * Base TLB flushing operations: | 
|  | * | 
|  | *  - flush_tlb_mm(mm) flushes the specified mm context TLB's | 
|  | *  - flush_tlb_page(vma, vmaddr) flushes one page | 
|  | *  - flush_tlb_range(vma, start, end) flushes a range of pages | 
|  | *  - flush_tlb_kernel_range(start, end) flushes kernel pages | 
|  | * | 
|  | *  - local_* variants of page and mm only apply to the current | 
|  | *    processor | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * These are the base non-SMP variants of page and mm flushing | 
|  | */ | 
|  | void local_flush_tlb_mm(struct mm_struct *mm) | 
|  | { | 
|  | unsigned int pid; | 
|  |  | 
|  | preempt_disable(); | 
|  | pid = mm->context.id; | 
|  | if (pid != MMU_NO_CONTEXT) | 
|  | _tlbil_pid(pid); | 
|  | preempt_enable(); | 
|  | } | 
|  | EXPORT_SYMBOL(local_flush_tlb_mm); | 
|  |  | 
|  | void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, | 
|  | int tsize, int ind) | 
|  | { | 
|  | unsigned int pid; | 
|  |  | 
|  | preempt_disable(); | 
|  | pid = mm ? mm->context.id : 0; | 
|  | if (pid != MMU_NO_CONTEXT) | 
|  | _tlbil_va(vmaddr, pid, tsize, ind); | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) | 
|  | { | 
|  | __local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, | 
|  | mmu_get_tsize(mmu_virtual_psize), 0); | 
|  | } | 
|  | EXPORT_SYMBOL(local_flush_tlb_page); | 
|  |  | 
|  | /* | 
|  | * And here are the SMP non-local implementations | 
|  | */ | 
|  | #ifdef CONFIG_SMP | 
|  |  | 
|  | static DEFINE_RAW_SPINLOCK(tlbivax_lock); | 
|  |  | 
|  | static int mm_is_core_local(struct mm_struct *mm) | 
|  | { | 
|  | return cpumask_subset(mm_cpumask(mm), | 
|  | topology_thread_cpumask(smp_processor_id())); | 
|  | } | 
|  |  | 
|  | struct tlb_flush_param { | 
|  | unsigned long addr; | 
|  | unsigned int pid; | 
|  | unsigned int tsize; | 
|  | unsigned int ind; | 
|  | }; | 
|  |  | 
|  | static void do_flush_tlb_mm_ipi(void *param) | 
|  | { | 
|  | struct tlb_flush_param *p = param; | 
|  |  | 
|  | _tlbil_pid(p ? p->pid : 0); | 
|  | } | 
|  |  | 
|  | static void do_flush_tlb_page_ipi(void *param) | 
|  | { | 
|  | struct tlb_flush_param *p = param; | 
|  |  | 
|  | _tlbil_va(p->addr, p->pid, p->tsize, p->ind); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Note on invalidations and PID: | 
|  | * | 
|  | * We snapshot the PID with preempt disabled. At this point, it can still | 
|  | * change either because: | 
|  | * - our context is being stolen (PID -> NO_CONTEXT) on another CPU | 
|  | * - we are invaliating some target that isn't currently running here | 
|  | *   and is concurrently acquiring a new PID on another CPU | 
|  | * - some other CPU is re-acquiring a lost PID for this mm | 
|  | * etc... | 
|  | * | 
|  | * However, this shouldn't be a problem as we only guarantee | 
|  | * invalidation of TLB entries present prior to this call, so we | 
|  | * don't care about the PID changing, and invalidating a stale PID | 
|  | * is generally harmless. | 
|  | */ | 
|  |  | 
|  | void flush_tlb_mm(struct mm_struct *mm) | 
|  | { | 
|  | unsigned int pid; | 
|  |  | 
|  | preempt_disable(); | 
|  | pid = mm->context.id; | 
|  | if (unlikely(pid == MMU_NO_CONTEXT)) | 
|  | goto no_context; | 
|  | if (!mm_is_core_local(mm)) { | 
|  | struct tlb_flush_param p = { .pid = pid }; | 
|  | /* Ignores smp_processor_id() even if set. */ | 
|  | smp_call_function_many(mm_cpumask(mm), | 
|  | do_flush_tlb_mm_ipi, &p, 1); | 
|  | } | 
|  | _tlbil_pid(pid); | 
|  | no_context: | 
|  | preempt_enable(); | 
|  | } | 
|  | EXPORT_SYMBOL(flush_tlb_mm); | 
|  |  | 
|  | void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, | 
|  | int tsize, int ind) | 
|  | { | 
|  | struct cpumask *cpu_mask; | 
|  | unsigned int pid; | 
|  |  | 
|  | preempt_disable(); | 
|  | pid = mm ? mm->context.id : 0; | 
|  | if (unlikely(pid == MMU_NO_CONTEXT)) | 
|  | goto bail; | 
|  | cpu_mask = mm_cpumask(mm); | 
|  | if (!mm_is_core_local(mm)) { | 
|  | /* If broadcast tlbivax is supported, use it */ | 
|  | if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) { | 
|  | int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL); | 
|  | if (lock) | 
|  | raw_spin_lock(&tlbivax_lock); | 
|  | _tlbivax_bcast(vmaddr, pid, tsize, ind); | 
|  | if (lock) | 
|  | raw_spin_unlock(&tlbivax_lock); | 
|  | goto bail; | 
|  | } else { | 
|  | struct tlb_flush_param p = { | 
|  | .pid = pid, | 
|  | .addr = vmaddr, | 
|  | .tsize = tsize, | 
|  | .ind = ind, | 
|  | }; | 
|  | /* Ignores smp_processor_id() even if set in cpu_mask */ | 
|  | smp_call_function_many(cpu_mask, | 
|  | do_flush_tlb_page_ipi, &p, 1); | 
|  | } | 
|  | } | 
|  | _tlbil_va(vmaddr, pid, tsize, ind); | 
|  | bail: | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) | 
|  | { | 
|  | __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, | 
|  | mmu_get_tsize(mmu_virtual_psize), 0); | 
|  | } | 
|  | EXPORT_SYMBOL(flush_tlb_page); | 
|  |  | 
|  | #endif /* CONFIG_SMP */ | 
|  |  | 
|  | /* | 
|  | * Flush kernel TLB entries in the given range | 
|  | */ | 
|  | void flush_tlb_kernel_range(unsigned long start, unsigned long end) | 
|  | { | 
|  | #ifdef CONFIG_SMP | 
|  | preempt_disable(); | 
|  | smp_call_function(do_flush_tlb_mm_ipi, NULL, 1); | 
|  | _tlbil_pid(0); | 
|  | preempt_enable(); | 
|  | #else | 
|  | _tlbil_pid(0); | 
|  | #endif | 
|  | } | 
|  | EXPORT_SYMBOL(flush_tlb_kernel_range); | 
|  |  | 
|  | /* | 
|  | * Currently, for range flushing, we just do a full mm flush. This should | 
|  | * be optimized based on a threshold on the size of the range, since | 
|  | * some implementation can stack multiple tlbivax before a tlbsync but | 
|  | * for now, we keep it that way | 
|  | */ | 
|  | void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, | 
|  | unsigned long end) | 
|  |  | 
|  | { | 
|  | flush_tlb_mm(vma->vm_mm); | 
|  | } | 
|  | EXPORT_SYMBOL(flush_tlb_range); | 
|  |  | 
|  | void tlb_flush(struct mmu_gather *tlb) | 
|  | { | 
|  | flush_tlb_mm(tlb->mm); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Below are functions specific to the 64-bit variant of Book3E though that | 
|  | * may change in the future | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  |  | 
|  | /* | 
|  | * Handling of virtual linear page tables or indirect TLB entries | 
|  | * flushing when PTE pages are freed | 
|  | */ | 
|  | void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) | 
|  | { | 
|  | int tsize = mmu_psize_defs[mmu_pte_psize].enc; | 
|  |  | 
|  | if (book3e_htw_enabled) { | 
|  | unsigned long start = address & PMD_MASK; | 
|  | unsigned long end = address + PMD_SIZE; | 
|  | unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; | 
|  |  | 
|  | /* This isn't the most optimal, ideally we would factor out the | 
|  | * while preempt & CPU mask mucking around, or even the IPI but | 
|  | * it will do for now | 
|  | */ | 
|  | while (start < end) { | 
|  | __flush_tlb_page(tlb->mm, start, tsize, 1); | 
|  | start += size; | 
|  | } | 
|  | } else { | 
|  | unsigned long rmask = 0xf000000000000000ul; | 
|  | unsigned long rid = (address & rmask) | 0x1000000000000000ul; | 
|  | unsigned long vpte = address & ~rmask; | 
|  |  | 
|  | #ifdef CONFIG_PPC_64K_PAGES | 
|  | vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful; | 
|  | #else | 
|  | vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful; | 
|  | #endif | 
|  | vpte |= rid; | 
|  | __flush_tlb_page(tlb->mm, vpte, tsize, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void setup_page_sizes(void) | 
|  | { | 
|  | unsigned int tlb0cfg; | 
|  | unsigned int tlb0ps; | 
|  | unsigned int eptcfg; | 
|  | int i, psize; | 
|  |  | 
|  | #ifdef CONFIG_PPC_FSL_BOOK3E | 
|  | unsigned int mmucfg = mfspr(SPRN_MMUCFG); | 
|  |  | 
|  | if (((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) && | 
|  | (mmu_has_feature(MMU_FTR_TYPE_FSL_E))) { | 
|  | unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG); | 
|  | unsigned int min_pg, max_pg; | 
|  |  | 
|  | min_pg = (tlb1cfg & TLBnCFG_MINSIZE) >> TLBnCFG_MINSIZE_SHIFT; | 
|  | max_pg = (tlb1cfg & TLBnCFG_MAXSIZE) >> TLBnCFG_MAXSIZE_SHIFT; | 
|  |  | 
|  | for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { | 
|  | struct mmu_psize_def *def; | 
|  | unsigned int shift; | 
|  |  | 
|  | def = &mmu_psize_defs[psize]; | 
|  | shift = def->shift; | 
|  |  | 
|  | if (shift == 0) | 
|  | continue; | 
|  |  | 
|  | /* adjust to be in terms of 4^shift Kb */ | 
|  | shift = (shift - 10) >> 1; | 
|  |  | 
|  | if ((shift >= min_pg) && (shift <= max_pg)) | 
|  | def->flags |= MMU_PAGE_SIZE_DIRECT; | 
|  | } | 
|  |  | 
|  | goto no_indirect; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | tlb0cfg = mfspr(SPRN_TLB0CFG); | 
|  | tlb0ps = mfspr(SPRN_TLB0PS); | 
|  | eptcfg = mfspr(SPRN_EPTCFG); | 
|  |  | 
|  | /* Look for supported direct sizes */ | 
|  | for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { | 
|  | struct mmu_psize_def *def = &mmu_psize_defs[psize]; | 
|  |  | 
|  | if (tlb0ps & (1U << (def->shift - 10))) | 
|  | def->flags |= MMU_PAGE_SIZE_DIRECT; | 
|  | } | 
|  |  | 
|  | /* Indirect page sizes supported ? */ | 
|  | if ((tlb0cfg & TLBnCFG_IND) == 0) | 
|  | goto no_indirect; | 
|  |  | 
|  | /* Now, we only deal with one IND page size for each | 
|  | * direct size. Hopefully all implementations today are | 
|  | * unambiguous, but we might want to be careful in the | 
|  | * future. | 
|  | */ | 
|  | for (i = 0; i < 3; i++) { | 
|  | unsigned int ps, sps; | 
|  |  | 
|  | sps = eptcfg & 0x1f; | 
|  | eptcfg >>= 5; | 
|  | ps = eptcfg & 0x1f; | 
|  | eptcfg >>= 5; | 
|  | if (!ps || !sps) | 
|  | continue; | 
|  | for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { | 
|  | struct mmu_psize_def *def = &mmu_psize_defs[psize]; | 
|  |  | 
|  | if (ps == (def->shift - 10)) | 
|  | def->flags |= MMU_PAGE_SIZE_INDIRECT; | 
|  | if (sps == (def->shift - 10)) | 
|  | def->ind = ps + 10; | 
|  | } | 
|  | } | 
|  | no_indirect: | 
|  |  | 
|  | /* Cleanup array and print summary */ | 
|  | pr_info("MMU: Supported page sizes\n"); | 
|  | for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { | 
|  | struct mmu_psize_def *def = &mmu_psize_defs[psize]; | 
|  | const char *__page_type_names[] = { | 
|  | "unsupported", | 
|  | "direct", | 
|  | "indirect", | 
|  | "direct & indirect" | 
|  | }; | 
|  | if (def->flags == 0) { | 
|  | def->shift = 0; | 
|  | continue; | 
|  | } | 
|  | pr_info("  %8ld KB as %s\n", 1ul << (def->shift - 10), | 
|  | __page_type_names[def->flags & 0x3]); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void setup_mmu_htw(void) | 
|  | { | 
|  | extern unsigned int interrupt_base_book3e; | 
|  | extern unsigned int exc_data_tlb_miss_htw_book3e; | 
|  | extern unsigned int exc_instruction_tlb_miss_htw_book3e; | 
|  |  | 
|  | unsigned int *ibase = &interrupt_base_book3e; | 
|  |  | 
|  | /* Check if HW tablewalk is present, and if yes, enable it by: | 
|  | * | 
|  | * - patching the TLB miss handlers to branch to the | 
|  | *   one dedicates to it | 
|  | * | 
|  | * - setting the global book3e_htw_enabled | 
|  | */ | 
|  | unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); | 
|  |  | 
|  | if ((tlb0cfg & TLBnCFG_IND) && | 
|  | (tlb0cfg & TLBnCFG_PT)) { | 
|  | /* Our exceptions vectors start with a NOP and -then- a branch | 
|  | * to deal with single stepping from userspace which stops on | 
|  | * the second instruction. Thus we need to patch the second | 
|  | * instruction of the exception, not the first one | 
|  | */ | 
|  | patch_branch(ibase + (0x1c0 / 4) + 1, | 
|  | (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); | 
|  | patch_branch(ibase + (0x1e0 / 4) + 1, | 
|  | (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); | 
|  | book3e_htw_enabled = 1; | 
|  | } | 
|  | pr_info("MMU: Book3E Page Tables %s\n", | 
|  | book3e_htw_enabled ? "Enabled" : "Disabled"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Early initialization of the MMU TLB code | 
|  | */ | 
|  | static void __early_init_mmu(int boot_cpu) | 
|  | { | 
|  | unsigned int mas4; | 
|  |  | 
|  | /* XXX This will have to be decided at runtime, but right | 
|  | * now our boot and TLB miss code hard wires it. Ideally | 
|  | * we should find out a suitable page size and patch the | 
|  | * TLB miss code (either that or use the PACA to store | 
|  | * the value we want) | 
|  | */ | 
|  | mmu_linear_psize = MMU_PAGE_1G; | 
|  |  | 
|  | /* XXX This should be decided at runtime based on supported | 
|  | * page sizes in the TLB, but for now let's assume 16M is | 
|  | * always there and a good fit (which it probably is) | 
|  | */ | 
|  | mmu_vmemmap_psize = MMU_PAGE_16M; | 
|  |  | 
|  | /* XXX This code only checks for TLB 0 capabilities and doesn't | 
|  | *     check what page size combos are supported by the HW. It | 
|  | *     also doesn't handle the case where a separate array holds | 
|  | *     the IND entries from the array loaded by the PT. | 
|  | */ | 
|  | if (boot_cpu) { | 
|  | /* Look for supported page sizes */ | 
|  | setup_page_sizes(); | 
|  |  | 
|  | /* Look for HW tablewalk support */ | 
|  | setup_mmu_htw(); | 
|  | } | 
|  |  | 
|  | /* Set MAS4 based on page table setting */ | 
|  |  | 
|  | mas4 = 0x4 << MAS4_WIMGED_SHIFT; | 
|  | if (book3e_htw_enabled) { | 
|  | mas4 |= mas4 | MAS4_INDD; | 
|  | #ifdef CONFIG_PPC_64K_PAGES | 
|  | mas4 |=	BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT; | 
|  | mmu_pte_psize = MMU_PAGE_256M; | 
|  | #else | 
|  | mas4 |=	BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; | 
|  | mmu_pte_psize = MMU_PAGE_1M; | 
|  | #endif | 
|  | } else { | 
|  | #ifdef CONFIG_PPC_64K_PAGES | 
|  | mas4 |=	BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT; | 
|  | #else | 
|  | mas4 |=	BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; | 
|  | #endif | 
|  | mmu_pte_psize = mmu_virtual_psize; | 
|  | } | 
|  | mtspr(SPRN_MAS4, mas4); | 
|  |  | 
|  | /* Set the global containing the top of the linear mapping | 
|  | * for use by the TLB miss code | 
|  | */ | 
|  | linear_map_top = memblock_end_of_DRAM(); | 
|  |  | 
|  | #ifdef CONFIG_PPC_FSL_BOOK3E | 
|  | if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) { | 
|  | unsigned int num_cams; | 
|  |  | 
|  | /* use a quarter of the TLBCAM for bolted linear map */ | 
|  | num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4; | 
|  | linear_map_top = map_mem_in_cams(linear_map_top, num_cams); | 
|  |  | 
|  | /* limit memory so we dont have linear faults */ | 
|  | memblock_enforce_memory_limit(linear_map_top); | 
|  | memblock_analyze(); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* A sync won't hurt us after mucking around with | 
|  | * the MMU configuration | 
|  | */ | 
|  | mb(); | 
|  |  | 
|  | memblock_set_current_limit(linear_map_top); | 
|  | } | 
|  |  | 
|  | void __init early_init_mmu(void) | 
|  | { | 
|  | __early_init_mmu(1); | 
|  | } | 
|  |  | 
|  | void __cpuinit early_init_mmu_secondary(void) | 
|  | { | 
|  | __early_init_mmu(0); | 
|  | } | 
|  |  | 
|  | void setup_initial_memory_limit(phys_addr_t first_memblock_base, | 
|  | phys_addr_t first_memblock_size) | 
|  | { | 
|  | /* On Embedded 64-bit, we adjust the RMA size to match | 
|  | * the bolted TLB entry. We know for now that only 1G | 
|  | * entries are supported though that may eventually | 
|  | * change. We crop it to the size of the first MEMBLOCK to | 
|  | * avoid going over total available memory just in case... | 
|  | */ | 
|  | ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000); | 
|  |  | 
|  | /* Finally limit subsequent allocations */ | 
|  | memblock_set_current_limit(first_memblock_base + ppc64_rma_size); | 
|  | } | 
|  | #endif /* CONFIG_PPC64 */ |