|  | /* | 
|  | * MPC83xx/85xx/86xx PCI/PCIE support routing. | 
|  | * | 
|  | * Copyright 2007-2011 Freescale Semiconductor, Inc. | 
|  | * Copyright 2008-2009 MontaVista Software, Inc. | 
|  | * | 
|  | * Initial author: Xianghua Xiao <x.xiao@freescale.com> | 
|  | * Recode: ZHANG WEI <wei.zhang@freescale.com> | 
|  | * Rewrite the routing for Frescale PCI and PCI Express | 
|  | * 	Roy Zang <tie-fei.zang@freescale.com> | 
|  | * MPC83xx PCI-Express support: | 
|  | * 	Tony Li <tony.li@freescale.com> | 
|  | * 	Anton Vorontsov <avorontsov@ru.mvista.com> | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/log2.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/pci-bridge.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <sysdev/fsl_soc.h> | 
|  | #include <sysdev/fsl_pci.h> | 
|  |  | 
|  | static int fsl_pcie_bus_fixup, is_mpc83xx_pci; | 
|  |  | 
|  | static void __init quirk_fsl_pcie_header(struct pci_dev *dev) | 
|  | { | 
|  | /* if we aren't a PCIe don't bother */ | 
|  | if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) | 
|  | return; | 
|  |  | 
|  | dev->class = PCI_CLASS_BRIDGE_PCI << 8; | 
|  | fsl_pcie_bus_fixup = 1; | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int __init fsl_pcie_check_link(struct pci_controller *hose) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); | 
|  | if (val < PCIE_LTSSM_L0) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) | 
|  | static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, | 
|  | unsigned int index, const struct resource *res, | 
|  | resource_size_t offset) | 
|  | { | 
|  | resource_size_t pci_addr = res->start - offset; | 
|  | resource_size_t phys_addr = res->start; | 
|  | resource_size_t size = res->end - res->start + 1; | 
|  | u32 flags = 0x80044000; /* enable & mem R/W */ | 
|  | unsigned int i; | 
|  |  | 
|  | pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", | 
|  | (u64)res->start, (u64)size); | 
|  |  | 
|  | if (res->flags & IORESOURCE_PREFETCH) | 
|  | flags |= 0x10000000; /* enable relaxed ordering */ | 
|  |  | 
|  | for (i = 0; size > 0; i++) { | 
|  | unsigned int bits = min(__ilog2(size), | 
|  | __ffs(pci_addr | phys_addr)); | 
|  |  | 
|  | if (index + i >= 5) | 
|  | return -1; | 
|  |  | 
|  | out_be32(&pci->pow[index + i].potar, pci_addr >> 12); | 
|  | out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); | 
|  | out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); | 
|  | out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); | 
|  |  | 
|  | pci_addr += (resource_size_t)1U << bits; | 
|  | phys_addr += (resource_size_t)1U << bits; | 
|  | size -= (resource_size_t)1U << bits; | 
|  | } | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | /* atmu setup for fsl pci/pcie controller */ | 
|  | static void __init setup_pci_atmu(struct pci_controller *hose, | 
|  | struct resource *rsrc) | 
|  | { | 
|  | struct ccsr_pci __iomem *pci; | 
|  | int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; | 
|  | u64 mem, sz, paddr_hi = 0; | 
|  | u64 paddr_lo = ULLONG_MAX; | 
|  | u32 pcicsrbar = 0, pcicsrbar_sz; | 
|  | u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | | 
|  | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; | 
|  | char *name = hose->dn->full_name; | 
|  |  | 
|  | pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", | 
|  | (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1); | 
|  |  | 
|  | if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) { | 
|  | win_idx = 2; | 
|  | start_idx = 0; | 
|  | end_idx = 3; | 
|  | } | 
|  |  | 
|  | pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); | 
|  | if (!pci) { | 
|  | dev_err(hose->parent, "Unable to map ATMU registers\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Disable all windows (except powar0 since it's ignored) */ | 
|  | for(i = 1; i < 5; i++) | 
|  | out_be32(&pci->pow[i].powar, 0); | 
|  | for (i = start_idx; i < end_idx; i++) | 
|  | out_be32(&pci->piw[i].piwar, 0); | 
|  |  | 
|  | /* Setup outbound MEM window */ | 
|  | for(i = 0, j = 1; i < 3; i++) { | 
|  | if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) | 
|  | continue; | 
|  |  | 
|  | paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); | 
|  | paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); | 
|  |  | 
|  | n = setup_one_atmu(pci, j, &hose->mem_resources[i], | 
|  | hose->pci_mem_offset); | 
|  |  | 
|  | if (n < 0 || j >= 5) { | 
|  | pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); | 
|  | hose->mem_resources[i].flags |= IORESOURCE_DISABLED; | 
|  | } else | 
|  | j += n; | 
|  | } | 
|  |  | 
|  | /* Setup outbound IO window */ | 
|  | if (hose->io_resource.flags & IORESOURCE_IO) { | 
|  | if (j >= 5) { | 
|  | pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); | 
|  | } else { | 
|  | pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " | 
|  | "phy base 0x%016llx.\n", | 
|  | (u64)hose->io_resource.start, | 
|  | (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1, | 
|  | (u64)hose->io_base_phys); | 
|  | out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); | 
|  | out_be32(&pci->pow[j].potear, 0); | 
|  | out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); | 
|  | /* Enable, IO R/W */ | 
|  | out_be32(&pci->pow[j].powar, 0x80088000 | 
|  | | (__ilog2(hose->io_resource.end | 
|  | - hose->io_resource.start + 1) - 1)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* convert to pci address space */ | 
|  | paddr_hi -= hose->pci_mem_offset; | 
|  | paddr_lo -= hose->pci_mem_offset; | 
|  |  | 
|  | if (paddr_hi == paddr_lo) { | 
|  | pr_err("%s: No outbound window space\n", name); | 
|  | return ; | 
|  | } | 
|  |  | 
|  | if (paddr_lo == 0) { | 
|  | pr_err("%s: No space for inbound window\n", name); | 
|  | return ; | 
|  | } | 
|  |  | 
|  | /* setup PCSRBAR/PEXCSRBAR */ | 
|  | early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); | 
|  | early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); | 
|  | pcicsrbar_sz = ~pcicsrbar_sz + 1; | 
|  |  | 
|  | if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || | 
|  | (paddr_lo > 0x100000000ull)) | 
|  | pcicsrbar = 0x100000000ull - pcicsrbar_sz; | 
|  | else | 
|  | pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; | 
|  | early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); | 
|  |  | 
|  | paddr_lo = min(paddr_lo, (u64)pcicsrbar); | 
|  |  | 
|  | pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar); | 
|  |  | 
|  | /* Setup inbound mem window */ | 
|  | mem = memblock_end_of_DRAM(); | 
|  | sz = min(mem, paddr_lo); | 
|  | mem_log = __ilog2_u64(sz); | 
|  |  | 
|  | /* PCIe can overmap inbound & outbound since RX & TX are separated */ | 
|  | if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { | 
|  | /* Size window to exact size if power-of-two or one size up */ | 
|  | if ((1ull << mem_log) != mem) { | 
|  | if ((1ull << mem_log) > mem) | 
|  | pr_info("%s: Setting PCI inbound window " | 
|  | "greater than memory size\n", name); | 
|  | mem_log++; | 
|  | } | 
|  |  | 
|  | piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); | 
|  |  | 
|  | /* Setup inbound memory window */ | 
|  | out_be32(&pci->piw[win_idx].pitar,  0x00000000); | 
|  | out_be32(&pci->piw[win_idx].piwbar, 0x00000000); | 
|  | out_be32(&pci->piw[win_idx].piwar,  piwar); | 
|  | win_idx--; | 
|  |  | 
|  | hose->dma_window_base_cur = 0x00000000; | 
|  | hose->dma_window_size = (resource_size_t)sz; | 
|  | } else { | 
|  | u64 paddr = 0; | 
|  |  | 
|  | /* Setup inbound memory window */ | 
|  | out_be32(&pci->piw[win_idx].pitar,  paddr >> 12); | 
|  | out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); | 
|  | out_be32(&pci->piw[win_idx].piwar,  (piwar | (mem_log - 1))); | 
|  | win_idx--; | 
|  |  | 
|  | paddr += 1ull << mem_log; | 
|  | sz -= 1ull << mem_log; | 
|  |  | 
|  | if (sz) { | 
|  | mem_log = __ilog2_u64(sz); | 
|  | piwar |= (mem_log - 1); | 
|  |  | 
|  | out_be32(&pci->piw[win_idx].pitar,  paddr >> 12); | 
|  | out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); | 
|  | out_be32(&pci->piw[win_idx].piwar,  piwar); | 
|  | win_idx--; | 
|  |  | 
|  | paddr += 1ull << mem_log; | 
|  | } | 
|  |  | 
|  | hose->dma_window_base_cur = 0x00000000; | 
|  | hose->dma_window_size = (resource_size_t)paddr; | 
|  | } | 
|  |  | 
|  | if (hose->dma_window_size < mem) { | 
|  | #ifndef CONFIG_SWIOTLB | 
|  | pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to " | 
|  | "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", | 
|  | name); | 
|  | #endif | 
|  | /* adjusting outbound windows could reclaim space in mem map */ | 
|  | if (paddr_hi < 0xffffffffull) | 
|  | pr_warning("%s: WARNING: Outbound window cfg leaves " | 
|  | "gaps in memory map. Adjusting the memory map " | 
|  | "could reduce unnecessary bounce buffering.\n", | 
|  | name); | 
|  |  | 
|  | pr_info("%s: DMA window size is 0x%llx\n", name, | 
|  | (u64)hose->dma_window_size); | 
|  | } | 
|  |  | 
|  | iounmap(pci); | 
|  | } | 
|  |  | 
|  | static void __init setup_pci_cmd(struct pci_controller *hose) | 
|  | { | 
|  | u16 cmd; | 
|  | int cap_x; | 
|  |  | 
|  | early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); | 
|  | cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | 
|  | | PCI_COMMAND_IO; | 
|  | early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); | 
|  |  | 
|  | cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); | 
|  | if (cap_x) { | 
|  | int pci_x_cmd = cap_x + PCI_X_CMD; | 
|  | cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | 
|  | | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; | 
|  | early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); | 
|  | } else { | 
|  | early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); | 
|  | } | 
|  | } | 
|  |  | 
|  | void fsl_pcibios_fixup_bus(struct pci_bus *bus) | 
|  | { | 
|  | struct pci_controller *hose = pci_bus_to_host(bus); | 
|  | int i; | 
|  |  | 
|  | if ((bus->parent == hose->bus) && | 
|  | ((fsl_pcie_bus_fixup && | 
|  | early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || | 
|  | (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) | 
|  | { | 
|  | for (i = 0; i < 4; ++i) { | 
|  | struct resource *res = bus->resource[i]; | 
|  | struct resource *par = bus->parent->resource[i]; | 
|  | if (res) { | 
|  | res->start = 0; | 
|  | res->end   = 0; | 
|  | res->flags = 0; | 
|  | } | 
|  | if (res && par) { | 
|  | res->start = par->start; | 
|  | res->end   = par->end; | 
|  | res->flags = par->flags; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int __init fsl_add_bridge(struct device_node *dev, int is_primary) | 
|  | { | 
|  | int len; | 
|  | struct pci_controller *hose; | 
|  | struct resource rsrc; | 
|  | const int *bus_range; | 
|  |  | 
|  | if (!of_device_is_available(dev)) { | 
|  | pr_warning("%s: disabled\n", dev->full_name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | pr_debug("Adding PCI host bridge %s\n", dev->full_name); | 
|  |  | 
|  | /* Fetch host bridge registers address */ | 
|  | if (of_address_to_resource(dev, 0, &rsrc)) { | 
|  | printk(KERN_WARNING "Can't get pci register base!"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Get bus range if any */ | 
|  | bus_range = of_get_property(dev, "bus-range", &len); | 
|  | if (bus_range == NULL || len < 2 * sizeof(int)) | 
|  | printk(KERN_WARNING "Can't get bus-range for %s, assume" | 
|  | " bus 0\n", dev->full_name); | 
|  |  | 
|  | ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS); | 
|  | hose = pcibios_alloc_controller(dev); | 
|  | if (!hose) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hose->first_busno = bus_range ? bus_range[0] : 0x0; | 
|  | hose->last_busno = bus_range ? bus_range[1] : 0xff; | 
|  |  | 
|  | setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, | 
|  | PPC_INDIRECT_TYPE_BIG_ENDIAN); | 
|  | setup_pci_cmd(hose); | 
|  |  | 
|  | /* check PCI express link status */ | 
|  | if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { | 
|  | hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | | 
|  | PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; | 
|  | if (fsl_pcie_check_link(hose)) | 
|  | hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " | 
|  | "Firmware bus number: %d->%d\n", | 
|  | (unsigned long long)rsrc.start, hose->first_busno, | 
|  | hose->last_busno); | 
|  |  | 
|  | pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", | 
|  | hose, hose->cfg_addr, hose->cfg_data); | 
|  |  | 
|  | /* Interpret the "ranges" property */ | 
|  | /* This also maps the I/O region and sets isa_io/mem_base */ | 
|  | pci_process_bridge_OF_ranges(hose, dev, is_primary); | 
|  |  | 
|  | /* Setup PEX window registers */ | 
|  | setup_pci_atmu(hose, &rsrc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1021, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2040, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P3041, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5010, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P5020, quirk_fsl_pcie_header); | 
|  | #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ | 
|  |  | 
|  | #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header); | 
|  | DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header); | 
|  |  | 
|  | struct mpc83xx_pcie_priv { | 
|  | void __iomem *cfg_type0; | 
|  | void __iomem *cfg_type1; | 
|  | u32 dev_base; | 
|  | }; | 
|  |  | 
|  | struct pex_inbound_window { | 
|  | u32 ar; | 
|  | u32 tar; | 
|  | u32 barl; | 
|  | u32 barh; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * With the convention of u-boot, the PCIE outbound window 0 serves | 
|  | * as configuration transactions outbound. | 
|  | */ | 
|  | #define PEX_OUTWIN0_BAR		0xCA4 | 
|  | #define PEX_OUTWIN0_TAL		0xCA8 | 
|  | #define PEX_OUTWIN0_TAH		0xCAC | 
|  | #define PEX_RC_INWIN_BASE	0xE60 | 
|  | #define PEX_RCIWARn_EN		0x1 | 
|  |  | 
|  | static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) | 
|  | { | 
|  | struct pci_controller *hose = pci_bus_to_host(bus); | 
|  |  | 
|  | if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | /* | 
|  | * Workaround for the HW bug: for Type 0 configure transactions the | 
|  | * PCI-E controller does not check the device number bits and just | 
|  | * assumes that the device number bits are 0. | 
|  | */ | 
|  | if (bus->number == hose->first_busno || | 
|  | bus->primary == hose->first_busno) { | 
|  | if (devfn & 0xf8) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | } | 
|  |  | 
|  | if (ppc_md.pci_exclude_device) { | 
|  | if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, | 
|  | unsigned int devfn, int offset) | 
|  | { | 
|  | struct pci_controller *hose = pci_bus_to_host(bus); | 
|  | struct mpc83xx_pcie_priv *pcie = hose->dn->data; | 
|  | u32 dev_base = bus->number << 24 | devfn << 16; | 
|  | int ret; | 
|  |  | 
|  | ret = mpc83xx_pcie_exclude_device(bus, devfn); | 
|  | if (ret) | 
|  | return NULL; | 
|  |  | 
|  | offset &= 0xfff; | 
|  |  | 
|  | /* Type 0 */ | 
|  | if (bus->number == hose->first_busno) | 
|  | return pcie->cfg_type0 + offset; | 
|  |  | 
|  | if (pcie->dev_base == dev_base) | 
|  | goto mapped; | 
|  |  | 
|  | out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); | 
|  |  | 
|  | pcie->dev_base = dev_base; | 
|  | mapped: | 
|  | return pcie->cfg_type1 + offset; | 
|  | } | 
|  |  | 
|  | static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, | 
|  | int offset, int len, u32 *val) | 
|  | { | 
|  | void __iomem *cfg_addr; | 
|  |  | 
|  | cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); | 
|  | if (!cfg_addr) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  |  | 
|  | switch (len) { | 
|  | case 1: | 
|  | *val = in_8(cfg_addr); | 
|  | break; | 
|  | case 2: | 
|  | *val = in_le16(cfg_addr); | 
|  | break; | 
|  | default: | 
|  | *val = in_le32(cfg_addr); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, | 
|  | int offset, int len, u32 val) | 
|  | { | 
|  | struct pci_controller *hose = pci_bus_to_host(bus); | 
|  | void __iomem *cfg_addr; | 
|  |  | 
|  | cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); | 
|  | if (!cfg_addr) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  |  | 
|  | /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ | 
|  | if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) | 
|  | val &= 0xffffff00; | 
|  |  | 
|  | switch (len) { | 
|  | case 1: | 
|  | out_8(cfg_addr, val); | 
|  | break; | 
|  | case 2: | 
|  | out_le16(cfg_addr, val); | 
|  | break; | 
|  | default: | 
|  | out_le32(cfg_addr, val); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static struct pci_ops mpc83xx_pcie_ops = { | 
|  | .read = mpc83xx_pcie_read_config, | 
|  | .write = mpc83xx_pcie_write_config, | 
|  | }; | 
|  |  | 
|  | static int __init mpc83xx_pcie_setup(struct pci_controller *hose, | 
|  | struct resource *reg) | 
|  | { | 
|  | struct mpc83xx_pcie_priv *pcie; | 
|  | u32 cfg_bar; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  | pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); | 
|  | if (!pcie) | 
|  | return ret; | 
|  |  | 
|  | pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); | 
|  | if (!pcie->cfg_type0) | 
|  | goto err0; | 
|  |  | 
|  | cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); | 
|  | if (!cfg_bar) { | 
|  | /* PCI-E isn't configured. */ | 
|  | ret = -ENODEV; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); | 
|  | if (!pcie->cfg_type1) | 
|  | goto err1; | 
|  |  | 
|  | WARN_ON(hose->dn->data); | 
|  | hose->dn->data = pcie; | 
|  | hose->ops = &mpc83xx_pcie_ops; | 
|  |  | 
|  | out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); | 
|  | out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); | 
|  |  | 
|  | if (fsl_pcie_check_link(hose)) | 
|  | hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; | 
|  |  | 
|  | return 0; | 
|  | err1: | 
|  | iounmap(pcie->cfg_type0); | 
|  | err0: | 
|  | kfree(pcie); | 
|  | return ret; | 
|  |  | 
|  | } | 
|  |  | 
|  | int __init mpc83xx_add_bridge(struct device_node *dev) | 
|  | { | 
|  | int ret; | 
|  | int len; | 
|  | struct pci_controller *hose; | 
|  | struct resource rsrc_reg; | 
|  | struct resource rsrc_cfg; | 
|  | const int *bus_range; | 
|  | int primary; | 
|  |  | 
|  | is_mpc83xx_pci = 1; | 
|  |  | 
|  | if (!of_device_is_available(dev)) { | 
|  | pr_warning("%s: disabled by the firmware.\n", | 
|  | dev->full_name); | 
|  | return -ENODEV; | 
|  | } | 
|  | pr_debug("Adding PCI host bridge %s\n", dev->full_name); | 
|  |  | 
|  | /* Fetch host bridge registers address */ | 
|  | if (of_address_to_resource(dev, 0, &rsrc_reg)) { | 
|  | printk(KERN_WARNING "Can't get pci register base!\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); | 
|  |  | 
|  | if (of_address_to_resource(dev, 1, &rsrc_cfg)) { | 
|  | printk(KERN_WARNING | 
|  | "No pci config register base in dev tree, " | 
|  | "using default\n"); | 
|  | /* | 
|  | * MPC83xx supports up to two host controllers | 
|  | * 	one at 0x8500 has config space registers at 0x8300 | 
|  | * 	one at 0x8600 has config space registers at 0x8380 | 
|  | */ | 
|  | if ((rsrc_reg.start & 0xfffff) == 0x8500) | 
|  | rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; | 
|  | else if ((rsrc_reg.start & 0xfffff) == 0x8600) | 
|  | rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; | 
|  | } | 
|  | /* | 
|  | * Controller at offset 0x8500 is primary | 
|  | */ | 
|  | if ((rsrc_reg.start & 0xfffff) == 0x8500) | 
|  | primary = 1; | 
|  | else | 
|  | primary = 0; | 
|  |  | 
|  | /* Get bus range if any */ | 
|  | bus_range = of_get_property(dev, "bus-range", &len); | 
|  | if (bus_range == NULL || len < 2 * sizeof(int)) { | 
|  | printk(KERN_WARNING "Can't get bus-range for %s, assume" | 
|  | " bus 0\n", dev->full_name); | 
|  | } | 
|  |  | 
|  | ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS); | 
|  | hose = pcibios_alloc_controller(dev); | 
|  | if (!hose) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hose->first_busno = bus_range ? bus_range[0] : 0; | 
|  | hose->last_busno = bus_range ? bus_range[1] : 0xff; | 
|  |  | 
|  | if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { | 
|  | ret = mpc83xx_pcie_setup(hose, &rsrc_reg); | 
|  | if (ret) | 
|  | goto err0; | 
|  | } else { | 
|  | setup_indirect_pci(hose, rsrc_cfg.start, | 
|  | rsrc_cfg.start + 4, 0); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " | 
|  | "Firmware bus number: %d->%d\n", | 
|  | (unsigned long long)rsrc_reg.start, hose->first_busno, | 
|  | hose->last_busno); | 
|  |  | 
|  | pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", | 
|  | hose, hose->cfg_addr, hose->cfg_data); | 
|  |  | 
|  | /* Interpret the "ranges" property */ | 
|  | /* This also maps the I/O region and sets isa_io/mem_base */ | 
|  | pci_process_bridge_OF_ranges(hose, dev, primary); | 
|  |  | 
|  | return 0; | 
|  | err0: | 
|  | pcibios_free_controller(hose); | 
|  | return ret; | 
|  | } | 
|  | #endif /* CONFIG_PPC_83xx */ | 
|  |  | 
|  | u64 fsl_pci_immrbar_base(struct pci_controller *hose) | 
|  | { | 
|  | #ifdef CONFIG_PPC_83xx | 
|  | if (is_mpc83xx_pci) { | 
|  | struct mpc83xx_pcie_priv *pcie = hose->dn->data; | 
|  | struct pex_inbound_window *in; | 
|  | int i; | 
|  |  | 
|  | /* Walk the Root Complex Inbound windows to match IMMR base */ | 
|  | in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; | 
|  | for (i = 0; i < 4; i++) { | 
|  | /* not enabled, skip */ | 
|  | if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) | 
|  | continue; | 
|  |  | 
|  | if (get_immrbase() == in_le32(&in[i].tar)) | 
|  | return (u64)in_le32(&in[i].barh) << 32 | | 
|  | in_le32(&in[i].barl); | 
|  | } | 
|  |  | 
|  | printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) | 
|  | if (!is_mpc83xx_pci) { | 
|  | u32 base; | 
|  |  | 
|  | pci_bus_read_config_dword(hose->bus, | 
|  | PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); | 
|  | return base; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } |