| /* | 
 |  * LCD panel support for the TI OMAP H3 board | 
 |  * | 
 |  * Copyright (C) 2004 Nokia Corporation | 
 |  * Author: Imre Deak <imre.deak@nokia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms of the GNU General Public License as published by the | 
 |  * Free Software Foundation; either version 2 of the License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along | 
 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/i2c/tps65010.h> | 
 |  | 
 | #include <mach/gpio.h> | 
 | #include "omapfb.h" | 
 |  | 
 | #define MODULE_NAME	"omapfb-lcd_h3" | 
 |  | 
 | static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void h3_panel_cleanup(struct lcd_panel *panel) | 
 | { | 
 | } | 
 |  | 
 | static int h3_panel_enable(struct lcd_panel *panel) | 
 | { | 
 | 	int r = 0; | 
 |  | 
 | 	/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */ | 
 | 	r = tps65010_set_gpio_out_value(GPIO1, HIGH); | 
 | 	if (!r) | 
 | 		r = tps65010_set_gpio_out_value(GPIO2, HIGH); | 
 | 	if (r) | 
 | 		pr_err(MODULE_NAME ": Unable to turn on LCD panel\n"); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static void h3_panel_disable(struct lcd_panel *panel) | 
 | { | 
 | 	int r = 0; | 
 |  | 
 | 	/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */ | 
 | 	r = tps65010_set_gpio_out_value(GPIO1, LOW); | 
 | 	if (!r) | 
 | 		tps65010_set_gpio_out_value(GPIO2, LOW); | 
 | 	if (r) | 
 | 		pr_err(MODULE_NAME ": Unable to turn off LCD panel\n"); | 
 | } | 
 |  | 
 | static unsigned long h3_panel_get_caps(struct lcd_panel *panel) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct lcd_panel h3_panel = { | 
 | 	.name		= "h3", | 
 | 	.config		= OMAP_LCDC_PANEL_TFT, | 
 |  | 
 | 	.data_lines	= 16, | 
 | 	.bpp		= 16, | 
 | 	.x_res		= 240, | 
 | 	.y_res		= 320, | 
 | 	.pixel_clock	= 12000, | 
 | 	.hsw		= 12, | 
 | 	.hfp		= 14, | 
 | 	.hbp		= 72 - 12, | 
 | 	.vsw		= 1, | 
 | 	.vfp		= 1, | 
 | 	.vbp		= 0, | 
 | 	.pcd		= 0, | 
 |  | 
 | 	.init		= h3_panel_init, | 
 | 	.cleanup	= h3_panel_cleanup, | 
 | 	.enable		= h3_panel_enable, | 
 | 	.disable	= h3_panel_disable, | 
 | 	.get_caps	= h3_panel_get_caps, | 
 | }; | 
 |  | 
 | static int h3_panel_probe(struct platform_device *pdev) | 
 | { | 
 | 	omapfb_register_panel(&h3_panel); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int h3_panel_remove(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int h3_panel_suspend(struct platform_device *pdev, pm_message_t mesg) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int h3_panel_resume(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct platform_driver h3_panel_driver = { | 
 | 	.probe		= h3_panel_probe, | 
 | 	.remove		= h3_panel_remove, | 
 | 	.suspend	= h3_panel_suspend, | 
 | 	.resume		= h3_panel_resume, | 
 | 	.driver		= { | 
 | 		.name	= "lcd_h3", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init h3_panel_drv_init(void) | 
 | { | 
 | 	return platform_driver_register(&h3_panel_driver); | 
 | } | 
 |  | 
 | static void __exit h3_panel_drv_cleanup(void) | 
 | { | 
 | 	platform_driver_unregister(&h3_panel_driver); | 
 | } | 
 |  | 
 | module_init(h3_panel_drv_init); | 
 | module_exit(h3_panel_drv_cleanup); | 
 |  |