[AVR32] Follow the rules when dealing with the OCD system
The current debug trap handling code does a number of things that are
illegal according to the AVR32 Architecture manual. Most importantly,
it may try to schedule from Debug Mode, thus clearing the D bit, which
can lead to "undefined behaviour".
It seems like this works in most cases, but several people have
observed somewhat unstable behaviour when debugging programs,
including soft lockups. So there's definitely something which is not
right with the existing code.
The new code will never schedule from Debug mode, it will always exit
Debug mode with a "retd" instruction, and if something not running in
Debug mode needs to do something debug-related (like doing a single
step), it will enter debug mode through a "breakpoint" instruction.
The monitor code will then return directly to user space, bypassing
its own saved registers if necessary (since we don't actually care
about the trapped context, only the one that came before.)
This adds three instructions to the common exception handling code,
including one branch. It does not touch super-hot paths like the TLB
miss handler.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index 0de9a6e..002369e 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -30,20 +30,22 @@
static void ptrace_single_step(struct task_struct *tsk)
{
- pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n",
- tsk->pid, tsk->thread.cpu_context.sr);
- if (!(tsk->thread.cpu_context.sr & SR_D)) {
- /*
- * Set a breakpoint at the current pc to force the
- * process into debug mode. The syscall/exception
- * exit code will set a breakpoint at the return
- * address when this flag is set.
- */
- pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n");
- set_tsk_thread_flag(tsk, TIF_BREAKPOINT);
- }
+ pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
+ tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
- /* The monitor code will do the actual step for us */
+ /*
+ * We can't schedule in Debug mode, so when TIF_BREAKPOINT is
+ * set, the system call or exception handler will do a
+ * breakpoint to enter monitor mode before returning to
+ * userspace.
+ *
+ * The monitor code will then notice that TIF_SINGLE_STEP is
+ * set and return to userspace with single stepping enabled.
+ * The CPU will then enter monitor mode again after exactly
+ * one instruction has been executed, and the monitor code
+ * will then send a SIGTRAP to the process.
+ */
+ set_tsk_thread_flag(tsk, TIF_BREAKPOINT);
set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
}
@@ -55,23 +57,7 @@
void ptrace_disable(struct task_struct *child)
{
clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
-}
-
-/*
- * Handle hitting a breakpoint
- */
-static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
-{
- siginfo_t info;
-
- info.si_signo = SIGTRAP;
- info.si_errno = 0;
- info.si_code = TRAP_BRKPT;
- info.si_addr = (void __user *)instruction_pointer(regs);
-
- pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n",
- tsk->pid, info.si_addr);
- force_sig_info(SIGTRAP, &info, tsk);
+ clear_tsk_thread_flag(child, TIF_BREAKPOINT);
}
/*
@@ -84,9 +70,6 @@
unsigned long *regs;
unsigned long value;
- pr_debug("ptrace_read_user(%p, %#lx, %p)\n",
- tsk, offset, data);
-
if (offset & 3 || offset >= sizeof(struct user)) {
printk("ptrace_read_user: invalid offset 0x%08lx\n", offset);
return -EIO;
@@ -98,6 +81,9 @@
if (offset < sizeof(struct pt_regs))
value = regs[offset / sizeof(regs[0])];
+ pr_debug("ptrace_read_user(%s[%u], %#lx, %p) -> %#lx\n",
+ tsk->comm, tsk->pid, offset, data, value);
+
return put_user(value, data);
}
@@ -111,8 +97,11 @@
{
unsigned long *regs;
+ pr_debug("ptrace_write_user(%s[%u], %#lx, %#lx)\n",
+ tsk->comm, tsk->pid, offset, value);
+
if (offset & 3 || offset >= sizeof(struct user)) {
- printk("ptrace_write_user: invalid offset 0x%08lx\n", offset);
+ pr_debug(" invalid offset 0x%08lx\n", offset);
return -EIO;
}
@@ -155,9 +144,6 @@
{
int ret;
- pr_debug("arch_ptrace(%ld, %d, %#lx, %#lx)\n",
- request, child->pid, addr, data);
-
pr_debug("ptrace: Enabling monitor mode...\n");
ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
| (1 << OCD_DC_DBE_BIT));
@@ -241,20 +227,16 @@
break;
}
- pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n",
- ret, ocd_read(DC));
return ret;
}
asmlinkage void syscall_trace(void)
{
- pr_debug("syscall_trace called\n");
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return;
if (!(current->ptrace & PT_PTRACED))
return;
- pr_debug("syscall_trace: notifying parent\n");
/* The 0x80 provides a way for the tracing parent to
* distinguish between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
@@ -273,86 +255,143 @@
}
}
-asmlinkage void do_debug_priv(struct pt_regs *regs)
-{
- unsigned long dc, ds;
- unsigned long die_val;
-
- ds = ocd_read(DS);
-
- pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds);
-
- if (ds & (1 << OCD_DS_SSS_BIT))
- die_val = DIE_SSTEP;
- else
- die_val = DIE_BREAKPOINT;
-
- if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP) == NOTIFY_STOP)
- return;
-
- if (likely(ds & (1 << OCD_DS_SSS_BIT))) {
- extern void itlb_miss(void);
- extern void tlb_miss_common(void);
- struct thread_info *ti;
-
- dc = ocd_read(DC);
- dc &= ~(1 << OCD_DC_SS_BIT);
- ocd_write(DC, dc);
-
- ti = current_thread_info();
- set_ti_thread_flag(ti, TIF_BREAKPOINT);
-
- /* The TLB miss handlers don't check thread flags */
- if ((regs->pc >= (unsigned long)&itlb_miss)
- && (regs->pc <= (unsigned long)&tlb_miss_common)) {
- ocd_write(BWA2A, sysreg_read(RAR_EX));
- ocd_write(BWC2A, 0x40000001 | (get_asid() << 1));
- }
-
- /*
- * If we're running in supervisor mode, the breakpoint
- * will take us where we want directly, no need to
- * single step.
- */
- if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR)
- set_ti_thread_flag(ti, TIF_SINGLE_STEP);
- } else {
- panic("Unable to handle debug trap at pc = %08lx\n",
- regs->pc);
- }
-}
-
/*
- * Handle breakpoints, single steps and other debuggy things. To keep
- * things simple initially, we run with interrupts and exceptions
- * disabled all the time.
+ * debug_trampoline() is an assembly stub which will store all user
+ * registers on the stack and execute a breakpoint instruction.
+ *
+ * If we single-step into an exception handler which runs with
+ * interrupts disabled the whole time so it doesn't have to check for
+ * pending work, its return address will be modified so that it ends
+ * up returning to debug_trampoline.
+ *
+ * If the exception handler decides to store the user context and
+ * enable interrupts after all, it will restore the original return
+ * address and status register value. Before it returns, it will
+ * notice that TIF_BREAKPOINT is set and execute a breakpoint
+ * instruction.
*/
-asmlinkage void do_debug(struct pt_regs *regs)
+extern void debug_trampoline(void);
+
+asmlinkage struct pt_regs *do_debug(struct pt_regs *regs)
{
- unsigned long dc, ds;
+ struct thread_info *ti;
+ unsigned long trampoline_addr;
+ u32 status;
+ u32 ctrl;
+ int code;
- ds = ocd_read(DS);
- pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds);
+ status = ocd_read(DS);
+ ti = current_thread_info();
+ code = TRAP_BRKPT;
- if (test_thread_flag(TIF_BREAKPOINT)) {
- pr_debug("TIF_BREAKPOINT set\n");
- /* We're taking care of it */
- clear_thread_flag(TIF_BREAKPOINT);
- ocd_write(BWC2A, 0);
- }
+ pr_debug("do_debug: status=0x%08x PC=0x%08lx SR=0x%08lx tif=0x%08lx\n",
+ status, regs->pc, regs->sr, ti->flags);
- if (test_thread_flag(TIF_SINGLE_STEP)) {
- pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds);
- if (ds & (1 << OCD_DS_SSS_BIT)) {
- dc = ocd_read(DC);
- dc &= ~(1 << OCD_DC_SS_BIT);
- ocd_write(DC, dc);
+ if (!user_mode(regs)) {
+ unsigned long die_val = DIE_BREAKPOINT;
- clear_thread_flag(TIF_SINGLE_STEP);
- ptrace_break(current, regs);
+ if (status & (1 << OCD_DS_SSS_BIT))
+ die_val = DIE_SSTEP;
+
+ if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP)
+ == NOTIFY_STOP)
+ return regs;
+
+ if ((status & (1 << OCD_DS_SWB_BIT))
+ && test_and_clear_ti_thread_flag(
+ ti, TIF_BREAKPOINT)) {
+ /*
+ * Explicit breakpoint from trampoline or
+ * exception/syscall/interrupt handler.
+ *
+ * The real saved regs are on the stack right
+ * after the ones we saved on entry.
+ */
+ regs++;
+ pr_debug(" -> TIF_BREAKPOINT done, adjusted regs:"
+ "PC=0x%08lx SR=0x%08lx\n",
+ regs->pc, regs->sr);
+ BUG_ON(!user_mode(regs));
+
+ if (test_thread_flag(TIF_SINGLE_STEP)) {
+ pr_debug("Going to do single step...\n");
+ return regs;
+ }
+
+ /*
+ * No TIF_SINGLE_STEP means we're done
+ * stepping over a syscall. Do the trap now.
+ */
+ code = TRAP_TRACE;
+ } else if ((status & (1 << OCD_DS_SSS_BIT))
+ && test_ti_thread_flag(ti, TIF_SINGLE_STEP)) {
+
+ pr_debug("Stepped into something, "
+ "setting TIF_BREAKPOINT...\n");
+ set_ti_thread_flag(ti, TIF_BREAKPOINT);
+
+ /*
+ * We stepped into an exception, interrupt or
+ * syscall handler. Some exception handlers
+ * don't check for pending work, so we need to
+ * set up a trampoline just in case.
+ *
+ * The exception entry code will undo the
+ * trampoline stuff if it does a full context
+ * save (which also means that it'll check for
+ * pending work later.)
+ */
+ if ((regs->sr & MODE_MASK) == MODE_EXCEPTION) {
+ trampoline_addr
+ = (unsigned long)&debug_trampoline;
+
+ pr_debug("Setting up trampoline...\n");
+ ti->rar_saved = sysreg_read(RAR_EX);
+ ti->rsr_saved = sysreg_read(RSR_EX);
+ sysreg_write(RAR_EX, trampoline_addr);
+ sysreg_write(RSR_EX, (MODE_EXCEPTION
+ | SR_EM | SR_GM));
+ BUG_ON(ti->rsr_saved & MODE_MASK);
+ }
+
+ /*
+ * If we stepped into a system call, we
+ * shouldn't do a single step after we return
+ * since the return address is right after the
+ * "scall" instruction we were told to step
+ * over.
+ */
+ if ((regs->sr & MODE_MASK) == MODE_SUPERVISOR) {
+ pr_debug("Supervisor; no single step\n");
+ clear_ti_thread_flag(ti, TIF_SINGLE_STEP);
+ }
+
+ ctrl = ocd_read(DC);
+ ctrl &= ~(1 << OCD_DC_SS_BIT);
+ ocd_write(DC, ctrl);
+
+ return regs;
+ } else {
+ printk(KERN_ERR "Unexpected OCD_DS value: 0x%08x\n",
+ status);
+ printk(KERN_ERR "Thread flags: 0x%08lx\n", ti->flags);
+ die("Unhandled debug trap in kernel mode",
+ regs, SIGTRAP);
}
- } else {
- /* regular breakpoint */
- ptrace_break(current, regs);
+ } else if (status & (1 << OCD_DS_SSS_BIT)) {
+ /* Single step in user mode */
+ code = TRAP_TRACE;
+
+ ctrl = ocd_read(DC);
+ ctrl &= ~(1 << OCD_DC_SS_BIT);
+ ocd_write(DC, ctrl);
}
+
+ pr_debug("Sending SIGTRAP: code=%d PC=0x%08lx SR=0x%08lx\n",
+ code, regs->pc, regs->sr);
+
+ clear_thread_flag(TIF_SINGLE_STEP);
+ _exception(SIGTRAP, regs, code, instruction_pointer(regs));
+
+ return regs;
}