msm: board-msm7627a-display: Create separate board file for display
Various variants of 7627a uses common display code which is
duplicated over multiple board files. So, move out the common
code for display into separate board file to avoid rebase
issues during new board bring up and maintenance.
Change-Id: Ibf3558e5b26dfbd9f056c0f5f78f4bf8573ca642
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm7x27a.c b/arch/arm/mach-msm/board-msm7x27a.c
index 5bcd749..77db796 100644
--- a/arch/arm/mach-msm/board-msm7x27a.c
+++ b/arch/arm/mach-msm/board-msm7x27a.c
@@ -157,16 +157,6 @@
#define MSM_PMEM_ADSP_SIZE 0x1100000
#define MSM7x25A_MSM_PMEM_ADSP_SIZE 0xB91000
-
-#ifdef CONFIG_FB_MSM_TRIPLE_BUFFER
-#define MSM_FB_SIZE 0x260000
-#define MSM7x25A_MSM_FB_SIZE 0xE1000
-#else
-#define MSM_FB_SIZE 0x195000
-#define MSM7x25A_MSM_FB_SIZE 0x96000
-
-#endif
-
#endif
static struct android_usb_platform_data android_usb_pdata = {
@@ -400,253 +390,6 @@
early_param("pmem_adsp_size", pmem_adsp_size_setup);
-static unsigned fb_size = MSM_FB_SIZE;
-static int __init fb_size_setup(char *p)
-{
- fb_size = memparse(p, NULL);
- return 0;
-}
-
-early_param("fb_size", fb_size_setup);
-
-static struct regulator_bulk_data regs_lcdc[] = {
- { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
- { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
-};
-
-static uint32_t lcdc_gpio_initialized;
-
-static void lcdc_toshiba_gpio_init(void)
-{
- int rc = 0;
- if (!lcdc_gpio_initialized) {
- if (gpio_request(GPIO_SPI_CLK, "spi_clk")) {
- pr_err("failed to request gpio spi_clk\n");
- return;
- }
- if (gpio_request(GPIO_SPI_CS0_N, "spi_cs")) {
- pr_err("failed to request gpio spi_cs0_N\n");
- goto fail_gpio6;
- }
- if (gpio_request(GPIO_SPI_MOSI, "spi_mosi")) {
- pr_err("failed to request gpio spi_mosi\n");
- goto fail_gpio5;
- }
- if (gpio_request(GPIO_SPI_MISO, "spi_miso")) {
- pr_err("failed to request gpio spi_miso\n");
- goto fail_gpio4;
- }
- if (gpio_request(GPIO_DISPLAY_PWR_EN, "gpio_disp_pwr")) {
- pr_err("failed to request gpio_disp_pwr\n");
- goto fail_gpio3;
- }
- if (gpio_request(GPIO_BACKLIGHT_EN, "gpio_bkl_en")) {
- pr_err("failed to request gpio_bkl_en\n");
- goto fail_gpio2;
- }
- pmapp_disp_backlight_init();
-
- rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_lcdc), regs_lcdc);
- if (rc) {
- pr_err("%s: could not get regulators: %d\n",
- __func__, rc);
- goto fail_gpio1;
- }
-
- rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_lcdc),
- regs_lcdc);
- if (rc) {
- pr_err("%s: could not set voltages: %d\n",
- __func__, rc);
- goto fail_vreg;
- }
- lcdc_gpio_initialized = 1;
- }
- return;
-fail_vreg:
- regulator_bulk_free(ARRAY_SIZE(regs_lcdc), regs_lcdc);
-fail_gpio1:
- gpio_free(GPIO_BACKLIGHT_EN);
-fail_gpio2:
- gpio_free(GPIO_DISPLAY_PWR_EN);
-fail_gpio3:
- gpio_free(GPIO_SPI_MISO);
-fail_gpio4:
- gpio_free(GPIO_SPI_MOSI);
-fail_gpio5:
- gpio_free(GPIO_SPI_CS0_N);
-fail_gpio6:
- gpio_free(GPIO_SPI_CLK);
- lcdc_gpio_initialized = 0;
-}
-
-static uint32_t lcdc_gpio_table[] = {
- GPIO_SPI_CLK,
- GPIO_SPI_CS0_N,
- GPIO_SPI_MOSI,
- GPIO_DISPLAY_PWR_EN,
- GPIO_BACKLIGHT_EN,
- GPIO_SPI_MISO,
-};
-
-static void config_lcdc_gpio_table(uint32_t *table, int len, unsigned enable)
-{
- int n;
-
- if (lcdc_gpio_initialized) {
- /* All are IO Expander GPIOs */
- for (n = 0; n < (len - 1); n++)
- gpio_direction_output(table[n], 1);
- }
-}
-
-static void lcdc_toshiba_config_gpios(int enable)
-{
- config_lcdc_gpio_table(lcdc_gpio_table,
- ARRAY_SIZE(lcdc_gpio_table), enable);
-}
-
-static int msm_fb_lcdc_power_save(int on)
-{
- int rc = 0;
- /* Doing the init of the LCDC GPIOs very late as they are from
- an I2C-controlled IO Expander */
- lcdc_toshiba_gpio_init();
-
- if (lcdc_gpio_initialized) {
- gpio_set_value_cansleep(GPIO_DISPLAY_PWR_EN, on);
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, on);
-
- rc = on ? regulator_bulk_enable(
- ARRAY_SIZE(regs_lcdc), regs_lcdc) :
- regulator_bulk_disable(
- ARRAY_SIZE(regs_lcdc), regs_lcdc);
-
- if (rc)
- pr_err("%s: could not %sable regulators: %d\n",
- __func__, on ? "en" : "dis", rc);
- }
-
- return rc;
-}
-
-
-static int lcdc_toshiba_set_bl(int level)
-{
- int ret;
-
- ret = pmapp_disp_backlight_set_brightness(level);
- if (ret)
- pr_err("%s: can't set lcd backlight!\n", __func__);
-
- return ret;
-}
-
-
-static struct lcdc_platform_data lcdc_pdata = {
- .lcdc_gpio_config = NULL,
- .lcdc_power_save = msm_fb_lcdc_power_save,
-};
-
-static int lcd_panel_spi_gpio_num[] = {
- GPIO_SPI_MOSI, /* spi_sdi */
- GPIO_SPI_MISO, /* spi_sdoi */
- GPIO_SPI_CLK, /* spi_clk */
- GPIO_SPI_CS0_N, /* spi_cs */
-};
-
-static struct msm_panel_common_pdata lcdc_toshiba_panel_data = {
- .panel_config_gpio = lcdc_toshiba_config_gpios,
- .pmic_backlight = lcdc_toshiba_set_bl,
- .gpio_num = lcd_panel_spi_gpio_num,
-};
-
-static struct platform_device lcdc_toshiba_panel_device = {
- .name = "lcdc_toshiba_fwvga_pt",
- .id = 0,
- .dev = {
- .platform_data = &lcdc_toshiba_panel_data,
- }
-};
-
-static struct resource msm_fb_resources[] = {
- {
- .flags = IORESOURCE_DMA,
- }
-};
-
-#define PANEL_NAME_MAX_LEN 30
-#define LCDC_TOSHIBA_FWVGA_PANEL_NAME "lcdc_toshiba_fwvga_pt"
-#define MIPI_CMD_RENESAS_FWVGA_PANEL_NAME "mipi_cmd_renesas_fwvga"
-
-static int msm_fb_detect_panel(const char *name)
-{
- int ret = -ENODEV;
-
- if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) {
- if (!strncmp(name, "lcdc_toshiba_fwvga_pt", 21) ||
- !strncmp(name, "mipi_cmd_renesas_fwvga", 22))
- ret = 0;
- } else if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa()) {
- if (!strncmp(name, "mipi_cmd_renesas_fwvga", 22))
- ret = 0;
- }
-
-#if !defined(CONFIG_FB_MSM_LCDC_AUTO_DETECT) && \
- !defined(CONFIG_FB_MSM_MIPI_PANEL_AUTO_DETECT) && \
- !defined(CONFIG_FB_MSM_LCDC_MIPI_PANEL_AUTO_DETECT)
- if (machine_is_msm7x27a_surf() ||
- machine_is_msm7625a_surf()) {
- if (!strncmp(name, LCDC_TOSHIBA_FWVGA_PANEL_NAME,
- strnlen(LCDC_TOSHIBA_FWVGA_PANEL_NAME,
- PANEL_NAME_MAX_LEN)))
- return 0;
- }
-#endif
- return ret;
-}
-
-static struct msm_fb_platform_data msm_fb_pdata = {
- .detect_client = msm_fb_detect_panel,
-};
-
-static struct platform_device msm_fb_device = {
- .name = "msm_fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(msm_fb_resources),
- .resource = msm_fb_resources,
- .dev = {
- .platform_data = &msm_fb_pdata,
- }
-};
-
-#ifdef CONFIG_FB_MSM_MIPI_DSI
-static int mipi_renesas_set_bl(int level)
-{
- int ret;
-
- ret = pmapp_disp_backlight_set_brightness(level);
-
- if (ret)
- pr_err("%s: can't set lcd backlight!\n", __func__);
-
- return ret;
-}
-
-static struct msm_panel_common_pdata mipi_renesas_pdata = {
- .pmic_backlight = mipi_renesas_set_bl,
-};
-
-
-static struct platform_device mipi_dsi_renesas_panel_device = {
- .name = "mipi_renesas",
- .id = 0,
- .dev = {
- .platform_data = &mipi_renesas_pdata,
- }
-};
-#endif
-
#define SND(desc, num) { .name = #desc, .id = num }
static struct snd_endpoint snd_endpoints_list[] = {
SND(HANDSET, 0),
@@ -951,13 +694,8 @@
&android_pmem_audio_device,
&msm_device_snd,
&msm_device_adspdec,
- &msm_fb_device,
- &lcdc_toshiba_panel_device,
&msm_batt_device,
&smsc911x_device,
-#ifdef CONFIG_FB_MSM_MIPI_DSI
- &mipi_dsi_renesas_panel_device,
-#endif
&msm_kgsl_3d0,
#ifdef CONFIG_BT
&msm_bt_power_device,
@@ -983,24 +721,6 @@
}
early_param("pmem_audio_size", pmem_audio_size_setup);
-static void __init msm_msm7x2x_allocate_memory_regions(void)
-{
- void *addr;
- unsigned long size;
-
- if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa())
- fb_size = MSM7x25A_MSM_FB_SIZE;
- else
- fb_size = MSM_FB_SIZE;
-
- size = fb_size;
- addr = alloc_bootmem_align(size, 0x1000);
- msm_fb_resources[0].start = __pa(addr);
- msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
- pr_info("allocating %lu bytes at %p (%lx physical) for fb\n",
- size, addr, __pa(addr));
-}
-
static struct memtype_reserve msm7x27a_reserve_table[] __initdata = {
[MEMTYPE_SMI] = {
},
@@ -1074,247 +794,6 @@
msm_gsbi1_qup_i2c_device.dev.platform_data = &msm_gsbi1_qup_i2c_pdata;
}
-static struct msm_panel_common_pdata mdp_pdata = {
- .gpio = 97,
- .mdp_rev = MDP_REV_303,
-};
-
-
-#ifdef CONFIG_FB_MSM
-#define GPIO_LCDC_BRDG_PD 128
-#define GPIO_LCDC_BRDG_RESET_N 129
-
-#define LCDC_RESET_PHYS 0x90008014
-
-static void __iomem *lcdc_reset_ptr;
-
-static unsigned mipi_dsi_gpio[] = {
- GPIO_CFG(GPIO_LCDC_BRDG_RESET_N, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
- GPIO_CFG_2MA), /* LCDC_BRDG_RESET_N */
- GPIO_CFG(GPIO_LCDC_BRDG_PD, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
- GPIO_CFG_2MA), /* LCDC_BRDG_RESET_N */
-};
-
-enum {
- DSI_SINGLE_LANE = 1,
- DSI_TWO_LANES,
-};
-
-static int msm_fb_get_lane_config(void)
-{
- int rc = DSI_TWO_LANES;
-
- if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
- rc = DSI_SINGLE_LANE;
- pr_info("DSI Single Lane\n");
- } else {
- pr_info("DSI Two Lanes\n");
- }
- return rc;
-}
-
-static int msm_fb_dsi_client_reset(void)
-{
- int rc = 0;
-
- rc = gpio_request(GPIO_LCDC_BRDG_RESET_N, "lcdc_brdg_reset_n");
- if (rc < 0) {
- pr_err("failed to request lcd brdg reset_n\n");
- return rc;
- }
-
- rc = gpio_request(GPIO_LCDC_BRDG_PD, "lcdc_brdg_pd");
- if (rc < 0) {
- pr_err("failed to request lcd brdg pd\n");
- return rc;
- }
-
- rc = gpio_tlmm_config(mipi_dsi_gpio[0], GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("Failed to enable LCDC Bridge reset enable\n");
- goto gpio_error;
- }
-
- rc = gpio_tlmm_config(mipi_dsi_gpio[1], GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("Failed to enable LCDC Bridge pd enable\n");
- goto gpio_error2;
- }
-
- rc = gpio_direction_output(GPIO_LCDC_BRDG_RESET_N, 1);
- rc |= gpio_direction_output(GPIO_LCDC_BRDG_PD, 1);
- gpio_set_value_cansleep(GPIO_LCDC_BRDG_PD, 0);
-
- if (!rc) {
- if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) {
- lcdc_reset_ptr = ioremap_nocache(LCDC_RESET_PHYS,
- sizeof(uint32_t));
-
- if (!lcdc_reset_ptr)
- return 0;
- }
- return rc;
- } else {
- goto gpio_error;
- }
-
-gpio_error2:
- pr_err("Failed GPIO bridge pd\n");
- gpio_free(GPIO_LCDC_BRDG_PD);
-
-gpio_error:
- pr_err("Failed GPIO bridge reset\n");
- gpio_free(GPIO_LCDC_BRDG_RESET_N);
- return rc;
-}
-
-static struct regulator_bulk_data regs_dsi[] = {
- { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
- { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
-};
-
-static int dsi_gpio_initialized;
-
-static int mipi_dsi_panel_power(int on)
-{
- int rc = 0;
- uint32_t lcdc_reset_cfg;
-
- /* I2C-controlled GPIO Expander -init of the GPIOs very late */
- if (unlikely(!dsi_gpio_initialized)) {
- pmapp_disp_backlight_init();
-
- rc = gpio_request(GPIO_DISPLAY_PWR_EN, "gpio_disp_pwr");
- if (rc < 0) {
- pr_err("failed to request gpio_disp_pwr\n");
- return rc;
- }
-
- if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) {
- rc = gpio_direction_output(GPIO_DISPLAY_PWR_EN, 1);
- if (rc < 0) {
- pr_err("failed to enable display pwr\n");
- goto fail_gpio1;
- }
-
- rc = gpio_request(GPIO_BACKLIGHT_EN, "gpio_bkl_en");
- if (rc < 0) {
- pr_err("failed to request gpio_bkl_en\n");
- goto fail_gpio1;
- }
-
- rc = gpio_direction_output(GPIO_BACKLIGHT_EN, 1);
- if (rc < 0) {
- pr_err("failed to enable backlight\n");
- goto fail_gpio2;
- }
- }
-
- rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_dsi), regs_dsi);
- if (rc) {
- pr_err("%s: could not get regulators: %d\n",
- __func__, rc);
- goto fail_gpio2;
- }
-
- rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_dsi), regs_dsi);
- if (rc) {
- pr_err("%s: could not set voltages: %d\n",
- __func__, rc);
- goto fail_vreg;
- }
- if (pmapp_disp_backlight_set_brightness(100))
- pr_err("backlight set brightness failed\n");
-
- dsi_gpio_initialized = 1;
- }
-
- if (machine_is_msm7x27a_surf() || machine_is_msm7625a_surf()) {
- gpio_set_value_cansleep(GPIO_DISPLAY_PWR_EN, on);
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, on);
- } else if (machine_is_msm7x27a_ffa() ||
- machine_is_msm7625a_ffa()) {
- if (on) {
- /* This line drives an active low pin on FFA */
- rc = gpio_direction_output(GPIO_DISPLAY_PWR_EN, !on);
- if (rc < 0)
- pr_err("failed to set direction for "
- "display pwr\n");
- } else {
- gpio_set_value_cansleep(GPIO_DISPLAY_PWR_EN, !on);
- rc = gpio_direction_input(GPIO_DISPLAY_PWR_EN);
- if (rc < 0)
- pr_err("failed to set direction for "
- "display pwr\n");
- }
- }
-
- if (on) {
- gpio_set_value_cansleep(GPIO_LCDC_BRDG_PD, 0);
-
- if (machine_is_msm7x27a_surf() ||
- machine_is_msm7625a_surf()) {
- lcdc_reset_cfg = readl_relaxed(lcdc_reset_ptr);
- rmb();
- lcdc_reset_cfg &= ~1;
-
- writel_relaxed(lcdc_reset_cfg, lcdc_reset_ptr);
- msleep(20);
- wmb();
- lcdc_reset_cfg |= 1;
- writel_relaxed(lcdc_reset_cfg, lcdc_reset_ptr);
- } else {
- gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 0);
- msleep(20);
- gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 1);
- }
- } else {
- gpio_set_value_cansleep(GPIO_LCDC_BRDG_PD, 1);
-
- if (pmapp_disp_backlight_set_brightness(0))
- pr_err("backlight set brightness failed\n");
- }
-
- rc = on ? regulator_bulk_enable(ARRAY_SIZE(regs_dsi), regs_dsi) :
- regulator_bulk_disable(ARRAY_SIZE(regs_dsi), regs_dsi);
-
- if (rc)
- pr_err("%s: could not %sable regulators: %d\n",
- __func__, on ? "en" : "dis", rc);
-
- return rc;
-
-fail_vreg:
- regulator_bulk_free(ARRAY_SIZE(regs_dsi), regs_dsi);
-fail_gpio2:
- gpio_free(GPIO_BACKLIGHT_EN);
-fail_gpio1:
- gpio_free(GPIO_DISPLAY_PWR_EN);
- dsi_gpio_initialized = 0;
- return rc;
-}
-#endif
-
-#define MDP_303_VSYNC_GPIO 97
-
-#ifdef CONFIG_FB_MSM_MDP303
-static struct mipi_dsi_platform_data mipi_dsi_pdata = {
- .vsync_gpio = MDP_303_VSYNC_GPIO,
- .dsi_power_save = mipi_dsi_panel_power,
- .dsi_client_reset = msm_fb_dsi_client_reset,
- .get_lane_config = msm_fb_get_lane_config,
-};
-#endif
-
-static void __init msm_fb_add_devices(void)
-{
- msm_fb_register_device("mdp", &mdp_pdata);
- msm_fb_register_device("lcdc", &lcdc_pdata);
-#ifdef CONFIG_FB_MSM_MDP303
- msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
-#endif
-}
-
#define MSM_EBI2_PHYS 0xa0d00000
#define MSM_EBI2_XMEM_CS2_CFG1 0xa0d10030
@@ -1678,7 +1157,7 @@
static void __init msm7x2x_init_early(void)
{
- msm_msm7x2x_allocate_memory_regions();
+ msm_msm7627a_allocate_memory_regions();
}
MACHINE_START(MSM7X27A_RUMI3, "QCT MSM7x27a RUMI3")