ath9k: Remove all the useless ah_ variable prefixes
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 7c011b1..08f676a 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -135,7 +135,7 @@
* discard the frame. Enable this if you want to see
* error frames in Monitor mode.
*/
- if (sc->sc_ah->ah_opmode != NL80211_IFTYPE_MONITOR)
+ if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR)
goto rx_next;
} else if (ds->ds_rxstat.rs_status != 0) {
if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
@@ -161,7 +161,7 @@
* decryption and MIC failures. For monitor mode,
* we also ignore the CRC error.
*/
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_MONITOR) {
+ if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) {
if (ds->ds_rxstat.rs_status &
~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
ATH9K_RXERR_CRC))
@@ -241,7 +241,7 @@
ath9k_hw_setrxfilter(ah, rfilt);
/* configure bssid mask */
- if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
ath9k_hw_setbssidmask(sc);
/* configure operational mode */
@@ -360,13 +360,13 @@
| ATH9K_RX_FILTER_MCAST;
/* If not a STA, enable processing of Probe Requests */
- if (sc->sc_ah->ah_opmode != NL80211_IFTYPE_STATION)
+ if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
rfilt |= ATH9K_RX_FILTER_PROBEREQ;
/* Can't set HOSTAP into promiscous mode */
- if (((sc->sc_ah->ah_opmode != NL80211_IFTYPE_AP) &&
+ if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
(sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
- (sc->sc_ah->ah_opmode == NL80211_IFTYPE_MONITOR)) {
+ (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR)) {
rfilt |= ATH9K_RX_FILTER_PROM;
/* ??? To prevent from sending ACK */
rfilt &= ~ATH9K_RX_FILTER_UCAST;
@@ -375,13 +375,13 @@
if (sc->rx.rxfilter & FIF_CONTROL)
rfilt |= ATH9K_RX_FILTER_CONTROL;
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION ||
- sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC)
+ if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION ||
+ sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
rfilt |= ATH9K_RX_FILTER_BEACON;
/* If in HOSTAP mode, want to enable reception of PSPOLL frames
& beacon frames */
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP)
+ if (sc->sc_ah->opmode == NL80211_IFTYPE_AP)
rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL);
return rfilt;