| /* | 
 |  * arch/arm/mach-ixp4xx/nslu2-pci.c | 
 |  * | 
 |  * NSLU2 board-level PCI initialization | 
 |  * | 
 |  * based on ixdp425-pci.c: | 
 |  *	Copyright (C) 2002 Intel Corporation. | 
 |  *	Copyright (C) 2003-2004 MontaVista Software, Inc. | 
 |  * | 
 |  * Maintainer: http://www.nslu2-linux.org/ | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/init.h> | 
 | #include <linux/irq.h> | 
 |  | 
 | #include <asm/mach/pci.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | void __init nslu2_pci_preinit(void) | 
 | { | 
 | 	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); | 
 | 	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); | 
 | 	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); | 
 |  | 
 | 	ixp4xx_pci_preinit(); | 
 | } | 
 |  | 
 | static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) | 
 | { | 
 | 	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { | 
 | 		IRQ_NSLU2_PCI_INTA, | 
 | 		IRQ_NSLU2_PCI_INTB, | 
 | 		IRQ_NSLU2_PCI_INTC, | 
 | 	}; | 
 |  | 
 | 	int irq = -1; | 
 |  | 
 | 	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && | 
 | 		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { | 
 | 			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; | 
 | 	} | 
 |  | 
 | 	return irq; | 
 | } | 
 |  | 
 | struct hw_pci __initdata nslu2_pci = { | 
 | 	.nr_controllers = 1, | 
 | 	.preinit	= nslu2_pci_preinit, | 
 | 	.swizzle	= pci_std_swizzle, | 
 | 	.setup		= ixp4xx_setup, | 
 | 	.scan		= ixp4xx_scan_bus, | 
 | 	.map_irq	= nslu2_map_irq, | 
 | }; | 
 |  | 
 | int __init nslu2_pci_init(void) /* monkey see, monkey do */ | 
 | { | 
 | 	if (machine_is_nslu2()) | 
 | 		pci_common_init(&nslu2_pci); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | subsys_initcall(nslu2_pci_init); |