USB: remove bogus USB_PORT_FEAT_*_SPEED symbols
This patch (as1348) removes the bogus
USB_PORT_FEAT_{HIGHSPEED,SUPERSPEED} symbols from ch11.h. No such
features are defined by the USB spec. (There is a PORT_LOWSPEED
feature, but the spec doesn't mention it except to say that host
software should never use it.) The speed indicators are port
statuses, not port features.
As a temporary workaround for the xhci-hcd driver, a fictional
USB_PORT_STAT_SUPER_SPEED symbol is added.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 8f2f477..dcd7fab 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1121,7 +1121,7 @@
u8 signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
const u32 mask = (1 << USB_PORT_FEAT_CONNECTION)
| (1 << USB_PORT_FEAT_ENABLE)
- | (1 << USB_PORT_FEAT_LOWSPEED);
+ | USB_PORT_STAT_LOW_SPEED;
spin_lock_irqsave(&sl811->lock, flags);
@@ -1162,7 +1162,7 @@
} else {
sl811->port1 |= mask;
if (irqstat & SL11H_INTMASK_DP)
- sl811->port1 &= ~(1 << USB_PORT_FEAT_LOWSPEED);
+ sl811->port1 &= ~USB_PORT_STAT_LOW_SPEED;
sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
}
@@ -1173,7 +1173,7 @@
#ifdef USE_B
sl811->irq_enable |= SL11H_INTMASK_DONE_B;
#endif
- if (sl811->port1 & (1 << USB_PORT_FEAT_LOWSPEED)) {
+ if (sl811->port1 & USB_PORT_STAT_LOW_SPEED) {
sl811->ctrl1 |= SL11H_CTL1MASK_LSPD;
ctrl2 |= SL811HS_CTL2MASK_DSWAP;
}