[SCSI] aic94xx: new driver
This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>
The log of the separate development is:
Alexis Bruemmer:
o aic94xx: fix hotplug/unplug for expanderless systems
o aic94xx: disable split completion timer/setting by default
o aic94xx: wide port off expander support
o aic94xx: remove various inline functions
o aic94xx: use bitops
o aic94xx: remove queue comment
o aic94xx: remove sas_common.c
o aic94xx: sas remove depot's
o aic94xx: use available list_for_each_entry_safe_reverse()
o aic94xx: sas header file merge
James Bottomley:
o aic94xx: fix TF_TMF_NO_CTX processing
o aic94xx: convert to request_firmware interface
o aic94xx: fix hotplug/unplug
o aic94xx: add link error counts to the expander phys
o aic94xx: add transport class phy reset capability
o aic94xx: remove local_attached flag
o Remove README
o Fixup Makefile variable for libsas rename
o Rename sas->libsas
o aic94xx: correct return code for sas_discover_event
o aic94xx: use parent backlink port
o aic94xx: remove channel abstraction
o aic94xx: fix routing algorithms
o aic94xx: add backlink port
o aic94xx: fix cascaded expander properties
o aic94xx: fix sleep under lock
o aic94xx: fix panic on module removal in complex topology
o aic94xx: make use of the new sas_port
o rename sas_port to asd_sas_port
o Fix for eh_strategy_handler move
o aic94xx: move entirely over to correct transport class formulation
o remove last vestages of sas_rphy_alloc()
o update for eh_timed_out move
o Preliminary expander support for aic94xx
o sas: remove event thread
o minor warning cleanups
o remove last vestiges of id mapping arrays
o Further updates
o Convert aic94xx over entirely to the transport class end device and
o update aic94xx/sas to use the new sas transport class end device
o [PATCH] aic94xx: attaching to the sas transport class
o Add missing completion removal from prior patch
o [PATCH] aic94xx: attaching to the sas transport class
o Build fixes from akpm
Jeff Garzik:
o [scsi aic94xx] Remove ->owner from PCI info table
Luben Tuikov:
o initial aic94xx driver
Mike Anderson:
o aic94xx: fix panic on module insertion
o aic94xx: stub out SATA_DEV case
o aic94xx: compile warning cleanups
o aic94xx: sas_alloc_task
o aic94xx: ref count update
o aic94xx nexus loss time value
o [PATCH] aic94xx: driver assertion in non-x86 BIOS env
Randy Dunlap:
o libsas: externs not needed
Robert Tarte:
o aic94xx: sequence patch - fixes SATA support
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
new file mode 100644
index 0000000..b961664
--- /dev/null
+++ b/drivers/scsi/libsas/sas_init.c
@@ -0,0 +1,227 @@
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+kmem_cache_t *sas_task_cache;
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+ const u32 poly = 0x00DB2777;
+ u32 r = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ int b;
+ for (b = 7; b >= 0; b--) {
+ r <<= 1;
+ if ((1 << b) & sas_addr[i]) {
+ if (!(r & 0x01000000))
+ r ^= poly;
+ } else if (r & 0x01000000)
+ r ^= poly;
+ }
+ }
+
+ hashed[0] = (r >> 16) & 0xFF;
+ hashed[1] = (r >> 8) & 0xFF ;
+ hashed[2] = r & 0xFF;
+}
+
+
+/* ---------- HA events ---------- */
+
+void sas_hae_reset(void *data)
+{
+ struct sas_ha_struct *ha = data;
+
+ sas_begin_event(HAE_RESET, &ha->event_lock,
+ &ha->pending);
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+ int error = 0;
+
+ spin_lock_init(&sas_ha->phy_port_lock);
+ sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+ if (sas_ha->lldd_queue_size == 0)
+ sas_ha->lldd_queue_size = 1;
+ else if (sas_ha->lldd_queue_size == -1)
+ sas_ha->lldd_queue_size = 128; /* Sanity */
+
+ error = sas_register_phys(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+ return error;
+ }
+
+ error = sas_register_ports(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+ goto Undo_phys;
+ }
+
+ error = sas_init_events(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+ goto Undo_ports;
+ }
+
+ if (sas_ha->lldd_max_execute_num > 1) {
+ error = sas_init_queue(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start queue thread:%d, "
+ "running in direct mode\n", error);
+ sas_ha->lldd_max_execute_num = 1;
+ }
+ }
+
+ return 0;
+
+Undo_ports:
+ sas_unregister_ports(sas_ha);
+Undo_phys:
+
+ return error;
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+ if (sas_ha->lldd_max_execute_num > 1) {
+ sas_shutdown_queue(sas_ha);
+ }
+
+ sas_unregister_ports(sas_ha);
+
+ return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+ if (scsi_is_sas_phy_local(phy))
+ /* FIXME: we have no local phy stats
+ * gathering at this time */
+ return -EINVAL;
+
+ return sas_smp_get_phy_events(phy);
+}
+
+static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ int ret;
+ enum phy_func reset_type;
+
+ if (hard_reset)
+ reset_type = PHY_FUNC_HARD_RESET;
+ else
+ reset_type = PHY_FUNC_LINK_RESET;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, reset_type);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number, reset_type);
+ }
+ return ret;
+}
+
+static struct sas_function_template sft = {
+ .phy_reset = sas_phy_reset,
+ .get_linkerrors = sas_get_linkerrors,
+};
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+ struct scsi_transport_template *stt = sas_attach_transport(&sft);
+ struct sas_internal *i;
+
+ if (!stt)
+ return stt;
+
+ i = to_sas_internal(stt);
+ i->dft = dft;
+ stt->create_work_queue = 1;
+ stt->eh_timed_out = sas_scsi_timed_out;
+ stt->eh_strategy_handler = sas_scsi_recover_host;
+
+ return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+void sas_domain_release_transport(struct scsi_transport_template *stt)
+{
+ sas_release_transport(stt);
+}
+EXPORT_SYMBOL_GPL(sas_domain_release_transport);
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+ sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
+ 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ if (!sas_task_cache)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __exit sas_class_exit(void)
+{
+ kmem_cache_destroy(sas_task_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);