msm: board-8064: Add Cypress touchscreen device on MTP
MTP suppports Cypress TS controller with a resolution
of 1024 x 600.
Change-Id: I1a821335ab233fcd944a1546fba09b81bebed38e
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-8064-gpiomux.c b/arch/arm/mach-msm/board-8064-gpiomux.c
index 0d4e854..62b7f17 100644
--- a/arch/arm/mach-msm/board-8064-gpiomux.c
+++ b/arch/arm/mach-msm/board-8064-gpiomux.c
@@ -142,6 +142,66 @@
.dir = GPIOMUX_OUT_LOW,
};
+static struct gpiomux_setting cyts_resout_sus_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_6MA,
+ .pull = GPIOMUX_PULL_UP,
+};
+
+static struct gpiomux_setting cyts_resout_act_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_6MA,
+ .pull = GPIOMUX_PULL_UP,
+};
+
+static struct gpiomux_setting cyts_sleep_sus_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_6MA,
+ .pull = GPIOMUX_PULL_DOWN,
+};
+
+static struct gpiomux_setting cyts_sleep_act_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_6MA,
+ .pull = GPIOMUX_PULL_DOWN,
+};
+
+static struct gpiomux_setting cyts_int_act_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_8MA,
+ .pull = GPIOMUX_PULL_UP,
+};
+
+static struct gpiomux_setting cyts_int_sus_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_2MA,
+ .pull = GPIOMUX_PULL_DOWN,
+};
+
+static struct msm_gpiomux_config cyts_gpio_configs[] __initdata = {
+ { /* TS INTERRUPT */
+ .gpio = 6,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &cyts_int_act_cfg,
+ [GPIOMUX_SUSPENDED] = &cyts_int_sus_cfg,
+ },
+ },
+ { /* TS SLEEP */
+ .gpio = 33,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &cyts_sleep_act_cfg,
+ [GPIOMUX_SUSPENDED] = &cyts_sleep_sus_cfg,
+ },
+ },
+ { /* TS RESOUT */
+ .gpio = 7,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &cyts_resout_act_cfg,
+ [GPIOMUX_SUSPENDED] = &cyts_resout_sus_cfg,
+ },
+ },
+};
+
static struct msm_gpiomux_config apq8064_hsic_configs[] = {
{
.gpio = 88, /*HSIC_STROBE */
@@ -453,6 +513,10 @@
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
+ if (machine_is_apq8064_mtp())
+ msm_gpiomux_install(cyts_gpio_configs,
+ ARRAY_SIZE(cyts_gpio_configs));
+
#ifdef CONFIG_USB_EHCI_MSM_HSIC
msm_gpiomux_install(apq8064_hsic_configs,
ARRAY_SIZE(apq8064_hsic_configs));