| /* | 
 |  * SMP support for ppc. | 
 |  * | 
 |  * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great | 
 |  * deal of code from the sparc and intel versions. | 
 |  * | 
 |  * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> | 
 |  * | 
 |  * PowerPC-64 Support added by Dave Engebretsen, Peter Bergner, and | 
 |  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com | 
 |  * | 
 |  *      This program is free software; you can redistribute it and/or | 
 |  *      modify it under the terms of the GNU General Public License | 
 |  *      as published by the Free Software Foundation; either version | 
 |  *      2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #undef DEBUG | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/init.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/cache.h> | 
 | #include <linux/err.h> | 
 | #include <linux/sysdev.h> | 
 | #include <linux/cpu.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/topology.h> | 
 |  | 
 | #include <asm/ptrace.h> | 
 | #include <asm/atomic.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/page.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/smp.h> | 
 | #include <asm/time.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/cputable.h> | 
 | #include <asm/system.h> | 
 | #include <asm/mpic.h> | 
 | #include <asm/vdso_datapage.h> | 
 | #ifdef CONFIG_PPC64 | 
 | #include <asm/paca.h> | 
 | #endif | 
 |  | 
 | #ifdef DEBUG | 
 | #include <asm/udbg.h> | 
 | #define DBG(fmt...) udbg_printf(fmt) | 
 | #else | 
 | #define DBG(fmt...) | 
 | #endif | 
 |  | 
 | int smp_hw_index[NR_CPUS]; | 
 | struct thread_info *secondary_ti; | 
 |  | 
 | cpumask_t cpu_possible_map = CPU_MASK_NONE; | 
 | cpumask_t cpu_online_map = CPU_MASK_NONE; | 
 | DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE; | 
 |  | 
 | EXPORT_SYMBOL(cpu_online_map); | 
 | EXPORT_SYMBOL(cpu_possible_map); | 
 | EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); | 
 |  | 
 | /* SMP operations for this machine */ | 
 | struct smp_ops_t *smp_ops; | 
 |  | 
 | static volatile unsigned int cpu_callin_map[NR_CPUS]; | 
 |  | 
 | int smt_enabled_at_boot = 1; | 
 |  | 
 | static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | void __devinit smp_generic_kick_cpu(int nr) | 
 | { | 
 | 	BUG_ON(nr < 0 || nr >= NR_CPUS); | 
 |  | 
 | 	/* | 
 | 	 * The processor is currently spinning, waiting for the | 
 | 	 * cpu_start field to become non-zero After we set cpu_start, | 
 | 	 * the processor will continue on to secondary_start | 
 | 	 */ | 
 | 	paca[nr].cpu_start = 1; | 
 | 	smp_mb(); | 
 | } | 
 | #endif | 
 |  | 
 | void smp_message_recv(int msg) | 
 | { | 
 | 	switch(msg) { | 
 | 	case PPC_MSG_CALL_FUNCTION: | 
 | 		generic_smp_call_function_interrupt(); | 
 | 		break; | 
 | 	case PPC_MSG_RESCHEDULE: | 
 | 		/* XXX Do we have to do this? */ | 
 | 		set_need_resched(); | 
 | 		break; | 
 | 	case PPC_MSG_CALL_FUNC_SINGLE: | 
 | 		generic_smp_call_function_single_interrupt(); | 
 | 		break; | 
 | 	case PPC_MSG_DEBUGGER_BREAK: | 
 | 		if (crash_ipi_function_ptr) { | 
 | 			crash_ipi_function_ptr(get_irq_regs()); | 
 | 			break; | 
 | 		} | 
 | #ifdef CONFIG_DEBUGGER | 
 | 		debugger_ipi(get_irq_regs()); | 
 | 		break; | 
 | #endif /* CONFIG_DEBUGGER */ | 
 | 		/* FALLTHROUGH */ | 
 | 	default: | 
 | 		printk("SMP %d: smp_message_recv(): unknown msg %d\n", | 
 | 		       smp_processor_id(), msg); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | void smp_send_reschedule(int cpu) | 
 | { | 
 | 	if (likely(smp_ops)) | 
 | 		smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); | 
 | } | 
 |  | 
 | void arch_send_call_function_single_ipi(int cpu) | 
 | { | 
 | 	smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE); | 
 | } | 
 |  | 
 | void arch_send_call_function_ipi(cpumask_t mask) | 
 | { | 
 | 	unsigned int cpu; | 
 |  | 
 | 	for_each_cpu_mask(cpu, mask) | 
 | 		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION); | 
 | } | 
 |  | 
 | #ifdef CONFIG_DEBUGGER | 
 | void smp_send_debugger_break(int cpu) | 
 | { | 
 | 	if (likely(smp_ops)) | 
 | 		smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_KEXEC | 
 | void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) | 
 | { | 
 | 	crash_ipi_function_ptr = crash_ipi_callback; | 
 | 	if (crash_ipi_callback && smp_ops) { | 
 | 		mb(); | 
 | 		smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | static void stop_this_cpu(void *dummy) | 
 | { | 
 | 	local_irq_disable(); | 
 | 	while (1) | 
 | 		; | 
 | } | 
 |  | 
 | void smp_send_stop(void) | 
 | { | 
 | 	smp_call_function(stop_this_cpu, NULL, 0); | 
 | } | 
 |  | 
 | struct thread_info *current_set[NR_CPUS]; | 
 |  | 
 | static void __devinit smp_store_cpu_info(int id) | 
 | { | 
 | 	per_cpu(pvr, id) = mfspr(SPRN_PVR); | 
 | } | 
 |  | 
 | static void __init smp_create_idle(unsigned int cpu) | 
 | { | 
 | 	struct task_struct *p; | 
 |  | 
 | 	/* create a process for the processor */ | 
 | 	p = fork_idle(cpu); | 
 | 	if (IS_ERR(p)) | 
 | 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); | 
 | #ifdef CONFIG_PPC64 | 
 | 	paca[cpu].__current = p; | 
 | 	paca[cpu].kstack = (unsigned long) task_thread_info(p) | 
 | 		+ THREAD_SIZE - STACK_FRAME_OVERHEAD; | 
 | #endif | 
 | 	current_set[cpu] = task_thread_info(p); | 
 | 	task_thread_info(p)->cpu = cpu; | 
 | } | 
 |  | 
 | void __init smp_prepare_cpus(unsigned int max_cpus) | 
 | { | 
 | 	unsigned int cpu; | 
 |  | 
 | 	DBG("smp_prepare_cpus\n"); | 
 |  | 
 | 	/*  | 
 | 	 * setup_cpu may need to be called on the boot cpu. We havent | 
 | 	 * spun any cpus up but lets be paranoid. | 
 | 	 */ | 
 | 	BUG_ON(boot_cpuid != smp_processor_id()); | 
 |  | 
 | 	/* Fixup boot cpu */ | 
 | 	smp_store_cpu_info(boot_cpuid); | 
 | 	cpu_callin_map[boot_cpuid] = 1; | 
 |  | 
 | 	if (smp_ops) | 
 | 		max_cpus = smp_ops->probe(); | 
 | 	else | 
 | 		max_cpus = 1; | 
 |   | 
 | 	smp_space_timers(max_cpus); | 
 |  | 
 | 	for_each_possible_cpu(cpu) | 
 | 		if (cpu != boot_cpuid) | 
 | 			smp_create_idle(cpu); | 
 | } | 
 |  | 
 | void __devinit smp_prepare_boot_cpu(void) | 
 | { | 
 | 	BUG_ON(smp_processor_id() != boot_cpuid); | 
 |  | 
 | 	cpu_set(boot_cpuid, cpu_online_map); | 
 | #ifdef CONFIG_PPC64 | 
 | 	paca[boot_cpuid].__current = current; | 
 | #endif | 
 | 	current_set[boot_cpuid] = task_thread_info(current); | 
 | } | 
 |  | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | /* State of each CPU during hotplug phases */ | 
 | DEFINE_PER_CPU(int, cpu_state) = { 0 }; | 
 |  | 
 | int generic_cpu_disable(void) | 
 | { | 
 | 	unsigned int cpu = smp_processor_id(); | 
 |  | 
 | 	if (cpu == boot_cpuid) | 
 | 		return -EBUSY; | 
 |  | 
 | 	cpu_clear(cpu, cpu_online_map); | 
 | #ifdef CONFIG_PPC64 | 
 | 	vdso_data->processorCount--; | 
 | 	fixup_irqs(cpu_online_map); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | int generic_cpu_enable(unsigned int cpu) | 
 | { | 
 | 	/* Do the normal bootup if we haven't | 
 | 	 * already bootstrapped. */ | 
 | 	if (system_state != SYSTEM_RUNNING) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	/* get the target out of it's holding state */ | 
 | 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; | 
 | 	smp_wmb(); | 
 |  | 
 | 	while (!cpu_online(cpu)) | 
 | 		cpu_relax(); | 
 |  | 
 | #ifdef CONFIG_PPC64 | 
 | 	fixup_irqs(cpu_online_map); | 
 | 	/* counter the irq disable in fixup_irqs */ | 
 | 	local_irq_enable(); | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | void generic_cpu_die(unsigned int cpu) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 100; i++) { | 
 | 		smp_rmb(); | 
 | 		if (per_cpu(cpu_state, cpu) == CPU_DEAD) | 
 | 			return; | 
 | 		msleep(100); | 
 | 	} | 
 | 	printk(KERN_ERR "CPU%d didn't die...\n", cpu); | 
 | } | 
 |  | 
 | void generic_mach_cpu_die(void) | 
 | { | 
 | 	unsigned int cpu; | 
 |  | 
 | 	local_irq_disable(); | 
 | 	cpu = smp_processor_id(); | 
 | 	printk(KERN_DEBUG "CPU%d offline\n", cpu); | 
 | 	__get_cpu_var(cpu_state) = CPU_DEAD; | 
 | 	smp_wmb(); | 
 | 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) | 
 | 		cpu_relax(); | 
 | 	cpu_set(cpu, cpu_online_map); | 
 | 	local_irq_enable(); | 
 | } | 
 | #endif | 
 |  | 
 | static int __devinit cpu_enable(unsigned int cpu) | 
 | { | 
 | 	if (smp_ops && smp_ops->cpu_enable) | 
 | 		return smp_ops->cpu_enable(cpu); | 
 |  | 
 | 	return -ENOSYS; | 
 | } | 
 |  | 
 | int __cpuinit __cpu_up(unsigned int cpu) | 
 | { | 
 | 	int c; | 
 |  | 
 | 	secondary_ti = current_set[cpu]; | 
 | 	if (!cpu_enable(cpu)) | 
 | 		return 0; | 
 |  | 
 | 	if (smp_ops == NULL || | 
 | 	    (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Make sure callin-map entry is 0 (can be leftover a CPU | 
 | 	 * hotplug | 
 | 	 */ | 
 | 	cpu_callin_map[cpu] = 0; | 
 |  | 
 | 	/* The information for processor bringup must | 
 | 	 * be written out to main store before we release | 
 | 	 * the processor. | 
 | 	 */ | 
 | 	smp_mb(); | 
 |  | 
 | 	/* wake up cpus */ | 
 | 	DBG("smp: kicking cpu %d\n", cpu); | 
 | 	smp_ops->kick_cpu(cpu); | 
 |  | 
 | 	/* | 
 | 	 * wait to see if the cpu made a callin (is actually up). | 
 | 	 * use this value that I found through experimentation. | 
 | 	 * -- Cort | 
 | 	 */ | 
 | 	if (system_state < SYSTEM_RUNNING) | 
 | 		for (c = 50000; c && !cpu_callin_map[cpu]; c--) | 
 | 			udelay(100); | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | 	else | 
 | 		/* | 
 | 		 * CPUs can take much longer to come up in the | 
 | 		 * hotplug case.  Wait five seconds. | 
 | 		 */ | 
 | 		for (c = 25; c && !cpu_callin_map[cpu]; c--) { | 
 | 			msleep(200); | 
 | 		} | 
 | #endif | 
 |  | 
 | 	if (!cpu_callin_map[cpu]) { | 
 | 		printk("Processor %u is stuck.\n", cpu); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	printk("Processor %u found.\n", cpu); | 
 |  | 
 | 	if (smp_ops->give_timebase) | 
 | 		smp_ops->give_timebase(); | 
 |  | 
 | 	/* Wait until cpu puts itself in the online map */ | 
 | 	while (!cpu_online(cpu)) | 
 | 		cpu_relax(); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* Activate a secondary processor. */ | 
 | int __devinit start_secondary(void *unused) | 
 | { | 
 | 	unsigned int cpu = smp_processor_id(); | 
 |  | 
 | 	atomic_inc(&init_mm.mm_count); | 
 | 	current->active_mm = &init_mm; | 
 |  | 
 | 	smp_store_cpu_info(cpu); | 
 | 	set_dec(tb_ticks_per_jiffy); | 
 | 	preempt_disable(); | 
 | 	cpu_callin_map[cpu] = 1; | 
 |  | 
 | 	smp_ops->setup_cpu(cpu); | 
 | 	if (smp_ops->take_timebase) | 
 | 		smp_ops->take_timebase(); | 
 |  | 
 | 	if (system_state > SYSTEM_BOOTING) | 
 | 		snapshot_timebase(); | 
 |  | 
 | 	secondary_cpu_time_init(); | 
 |  | 
 | 	ipi_call_lock(); | 
 | 	cpu_set(cpu, cpu_online_map); | 
 | 	ipi_call_unlock(); | 
 |  | 
 | 	local_irq_enable(); | 
 |  | 
 | 	cpu_idle(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int setup_profiling_timer(unsigned int multiplier) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | void __init smp_cpus_done(unsigned int max_cpus) | 
 | { | 
 | 	cpumask_t old_mask; | 
 |  | 
 | 	/* We want the setup_cpu() here to be called from CPU 0, but our | 
 | 	 * init thread may have been "borrowed" by another CPU in the meantime | 
 | 	 * se we pin us down to CPU 0 for a short while | 
 | 	 */ | 
 | 	old_mask = current->cpus_allowed; | 
 | 	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); | 
 | 	 | 
 | 	if (smp_ops) | 
 | 		smp_ops->setup_cpu(boot_cpuid); | 
 |  | 
 | 	set_cpus_allowed(current, old_mask); | 
 |  | 
 | 	snapshot_timebases(); | 
 |  | 
 | 	dump_numa_cpu_topology(); | 
 | } | 
 |  | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | int __cpu_disable(void) | 
 | { | 
 | 	if (smp_ops->cpu_disable) | 
 | 		return smp_ops->cpu_disable(); | 
 |  | 
 | 	return -ENOSYS; | 
 | } | 
 |  | 
 | void __cpu_die(unsigned int cpu) | 
 | { | 
 | 	if (smp_ops->cpu_die) | 
 | 		smp_ops->cpu_die(cpu); | 
 | } | 
 | #endif |