| /* drivers/rtc/rtc-v3020.c | 
 |  * | 
 |  * Copyright (C) 2006 8D Technologies inc. | 
 |  * Copyright (C) 2004 Compulab Ltd. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * Driver for the V3020 RTC | 
 |  * | 
 |  * Changelog: | 
 |  * | 
 |  *  10-May-2006: Raphael Assenat <raph@8d.com> | 
 |  *				- Converted to platform driver | 
 |  *				- Use the generic rtc class | 
 |  * | 
 |  *  ??-???-2004: Someone at Compulab | 
 |  *  			- Initial driver creation. | 
 |  * | 
 |  */ | 
 | #include <linux/platform_device.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/rtc.h> | 
 | #include <linux/types.h> | 
 | #include <linux/bcd.h> | 
 | #include <linux/rtc-v3020.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #include <asm/io.h> | 
 |  | 
 | #undef DEBUG | 
 |  | 
 | struct v3020 { | 
 | 	void __iomem *ioaddress; | 
 | 	int leftshift; | 
 | 	struct rtc_device *rtc; | 
 | }; | 
 |  | 
 | static void v3020_set_reg(struct v3020 *chip, unsigned char address, | 
 | 			unsigned char data) | 
 | { | 
 | 	int i; | 
 | 	unsigned char tmp; | 
 |  | 
 | 	tmp = address; | 
 | 	for (i = 0; i < 4; i++) { | 
 | 		writel((tmp & 1) << chip->leftshift, chip->ioaddress); | 
 | 		tmp >>= 1; | 
 | 		udelay(1); | 
 | 	} | 
 |  | 
 | 	/* Commands dont have data */ | 
 | 	if (!V3020_IS_COMMAND(address)) { | 
 | 		for (i = 0; i < 8; i++) { | 
 | 			writel((data & 1) << chip->leftshift, chip->ioaddress); | 
 | 			data >>= 1; | 
 | 			udelay(1); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static unsigned char v3020_get_reg(struct v3020 *chip, unsigned char address) | 
 | { | 
 | 	unsigned int data=0; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 4; i++) { | 
 | 		writel((address & 1) << chip->leftshift, chip->ioaddress); | 
 | 		address >>= 1; | 
 | 		udelay(1); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		data >>= 1; | 
 | 		if (readl(chip->ioaddress) & (1 << chip->leftshift)) | 
 | 			data |= 0x80; | 
 | 		udelay(1); | 
 | 	} | 
 |  | 
 | 	return data; | 
 | } | 
 |  | 
 | static int v3020_read_time(struct device *dev, struct rtc_time *dt) | 
 | { | 
 | 	struct v3020 *chip = dev_get_drvdata(dev); | 
 | 	int tmp; | 
 |  | 
 | 	/* Copy the current time to ram... */ | 
 | 	v3020_set_reg(chip, V3020_CMD_CLOCK2RAM, 0); | 
 |  | 
 | 	/* ...and then read constant values. */ | 
 | 	tmp = v3020_get_reg(chip, V3020_SECONDS); | 
 | 	dt->tm_sec	= BCD2BIN(tmp); | 
 | 	tmp = v3020_get_reg(chip, V3020_MINUTES); | 
 | 	dt->tm_min	= BCD2BIN(tmp); | 
 | 	tmp = v3020_get_reg(chip, V3020_HOURS); | 
 | 	dt->tm_hour	= BCD2BIN(tmp); | 
 | 	tmp = v3020_get_reg(chip, V3020_MONTH_DAY); | 
 | 	dt->tm_mday	= BCD2BIN(tmp); | 
 | 	tmp = v3020_get_reg(chip, V3020_MONTH); | 
 | 	dt->tm_mon    = BCD2BIN(tmp) - 1; | 
 | 	tmp = v3020_get_reg(chip, V3020_WEEK_DAY); | 
 | 	dt->tm_wday	= BCD2BIN(tmp); | 
 | 	tmp = v3020_get_reg(chip, V3020_YEAR); | 
 | 	dt->tm_year = BCD2BIN(tmp)+100; | 
 |  | 
 | #ifdef DEBUG | 
 | 	printk("\n%s : Read RTC values\n",__func__); | 
 | 	printk("tm_hour: %i\n",dt->tm_hour); | 
 | 	printk("tm_min : %i\n",dt->tm_min); | 
 | 	printk("tm_sec : %i\n",dt->tm_sec); | 
 | 	printk("tm_year: %i\n",dt->tm_year); | 
 | 	printk("tm_mon : %i\n",dt->tm_mon); | 
 | 	printk("tm_mday: %i\n",dt->tm_mday); | 
 | 	printk("tm_wday: %i\n",dt->tm_wday); | 
 | #endif | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int v3020_set_time(struct device *dev, struct rtc_time *dt) | 
 | { | 
 | 	struct v3020 *chip = dev_get_drvdata(dev); | 
 |  | 
 | #ifdef DEBUG | 
 | 	printk("\n%s : Setting RTC values\n",__func__); | 
 | 	printk("tm_sec : %i\n",dt->tm_sec); | 
 | 	printk("tm_min : %i\n",dt->tm_min); | 
 | 	printk("tm_hour: %i\n",dt->tm_hour); | 
 | 	printk("tm_mday: %i\n",dt->tm_mday); | 
 | 	printk("tm_wday: %i\n",dt->tm_wday); | 
 | 	printk("tm_year: %i\n",dt->tm_year); | 
 | #endif | 
 |  | 
 | 	/* Write all the values to ram... */ | 
 | 	v3020_set_reg(chip, V3020_SECONDS, 	BIN2BCD(dt->tm_sec)); | 
 | 	v3020_set_reg(chip, V3020_MINUTES, 	BIN2BCD(dt->tm_min)); | 
 | 	v3020_set_reg(chip, V3020_HOURS, 	BIN2BCD(dt->tm_hour)); | 
 | 	v3020_set_reg(chip, V3020_MONTH_DAY,	BIN2BCD(dt->tm_mday)); | 
 | 	v3020_set_reg(chip, V3020_MONTH,     BIN2BCD(dt->tm_mon + 1)); | 
 | 	v3020_set_reg(chip, V3020_WEEK_DAY, 	BIN2BCD(dt->tm_wday)); | 
 | 	v3020_set_reg(chip, V3020_YEAR, 	BIN2BCD(dt->tm_year % 100)); | 
 |  | 
 | 	/* ...and set the clock. */ | 
 | 	v3020_set_reg(chip, V3020_CMD_RAM2CLOCK, 0); | 
 |  | 
 | 	/* Compulab used this delay here. I dont know why, | 
 | 	 * the datasheet does not specify a delay. */ | 
 | 	/*mdelay(5);*/ | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct rtc_class_ops v3020_rtc_ops = { | 
 | 	.read_time	= v3020_read_time, | 
 | 	.set_time	= v3020_set_time, | 
 | }; | 
 |  | 
 | static int rtc_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct v3020_platform_data *pdata = pdev->dev.platform_data; | 
 | 	struct v3020 *chip; | 
 | 	struct rtc_device *rtc; | 
 | 	int retval = -EBUSY; | 
 | 	int i; | 
 | 	int temp; | 
 |  | 
 | 	if (pdev->num_resources != 1) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (pdev->resource[0].flags != IORESOURCE_MEM) | 
 | 		return -EBUSY; | 
 |  | 
 | 	chip = kzalloc(sizeof *chip, GFP_KERNEL); | 
 | 	if (!chip) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chip->leftshift = pdata->leftshift; | 
 | 	chip->ioaddress = ioremap(pdev->resource[0].start, 1); | 
 | 	if (chip->ioaddress == NULL) | 
 | 		goto err_chip; | 
 |  | 
 | 	/* Make sure the v3020 expects a communication cycle | 
 | 	 * by reading 8 times */ | 
 | 	for (i = 0; i < 8; i++) | 
 | 		temp = readl(chip->ioaddress); | 
 |  | 
 | 	/* Test chip by doing a write/read sequence | 
 | 	 * to the chip ram */ | 
 | 	v3020_set_reg(chip, V3020_SECONDS, 0x33); | 
 | 	if(v3020_get_reg(chip, V3020_SECONDS) != 0x33) { | 
 | 		retval = -ENODEV; | 
 | 		goto err_io; | 
 | 	} | 
 |  | 
 | 	/* Make sure frequency measurment mode, test modes, and lock | 
 | 	 * are all disabled */ | 
 | 	v3020_set_reg(chip, V3020_STATUS_0, 0x0); | 
 |  | 
 | 	dev_info(&pdev->dev, "Chip available at physical address 0x%llx," | 
 | 		"data connected to D%d\n", | 
 | 		(unsigned long long)pdev->resource[0].start, | 
 | 		chip->leftshift); | 
 |  | 
 | 	platform_set_drvdata(pdev, chip); | 
 |  | 
 | 	rtc = rtc_device_register("v3020", | 
 | 				&pdev->dev, &v3020_rtc_ops, THIS_MODULE); | 
 | 	if (IS_ERR(rtc)) { | 
 | 		retval = PTR_ERR(rtc); | 
 | 		goto err_io; | 
 | 	} | 
 | 	chip->rtc = rtc; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_io: | 
 | 	iounmap(chip->ioaddress); | 
 | err_chip: | 
 | 	kfree(chip); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int rtc_remove(struct platform_device *dev) | 
 | { | 
 | 	struct v3020 *chip = platform_get_drvdata(dev); | 
 | 	struct rtc_device *rtc = chip->rtc; | 
 |  | 
 | 	if (rtc) | 
 | 		rtc_device_unregister(rtc); | 
 |  | 
 | 	iounmap(chip->ioaddress); | 
 | 	kfree(chip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver rtc_device_driver = { | 
 | 	.probe	= rtc_probe, | 
 | 	.remove = rtc_remove, | 
 | 	.driver = { | 
 | 		.name	= "v3020", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static __init int v3020_init(void) | 
 | { | 
 | 	return platform_driver_register(&rtc_device_driver); | 
 | } | 
 |  | 
 | static __exit void v3020_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&rtc_device_driver); | 
 | } | 
 |  | 
 | module_init(v3020_init); | 
 | module_exit(v3020_exit); | 
 |  | 
 | MODULE_DESCRIPTION("V3020 RTC"); | 
 | MODULE_AUTHOR("Raphael Assenat"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:v3020"); |