| /* | 
 |  * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> | 
 |  * | 
 |  * The LM95241 is a sensor chip made by National Semiconductors. | 
 |  * It reports up to three temperatures (its own plus up to two external ones). | 
 |  * Complete datasheet can be obtained from National's website at: | 
 |  *   http://www.national.com/ds.cgi/LM/LM95241.pdf | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/sysfs.h> | 
 |  | 
 | #define DEVNAME "lm95241" | 
 |  | 
 | static const unsigned short normal_i2c[] = { | 
 | 	0x19, 0x2a, 0x2b, I2C_CLIENT_END }; | 
 |  | 
 | /* LM95241 registers */ | 
 | #define LM95241_REG_R_MAN_ID		0xFE | 
 | #define LM95241_REG_R_CHIP_ID		0xFF | 
 | #define LM95241_REG_R_STATUS		0x02 | 
 | #define LM95241_REG_RW_CONFIG		0x03 | 
 | #define LM95241_REG_RW_REM_FILTER	0x06 | 
 | #define LM95241_REG_RW_TRUTHERM		0x07 | 
 | #define LM95241_REG_W_ONE_SHOT		0x0F | 
 | #define LM95241_REG_R_LOCAL_TEMPH	0x10 | 
 | #define LM95241_REG_R_REMOTE1_TEMPH	0x11 | 
 | #define LM95241_REG_R_REMOTE2_TEMPH	0x12 | 
 | #define LM95241_REG_R_LOCAL_TEMPL	0x20 | 
 | #define LM95241_REG_R_REMOTE1_TEMPL	0x21 | 
 | #define LM95241_REG_R_REMOTE2_TEMPL	0x22 | 
 | #define LM95241_REG_RW_REMOTE_MODEL	0x30 | 
 |  | 
 | /* LM95241 specific bitfields */ | 
 | #define CFG_STOP 0x40 | 
 | #define CFG_CR0076 0x00 | 
 | #define CFG_CR0182 0x10 | 
 | #define CFG_CR1000 0x20 | 
 | #define CFG_CR2700 0x30 | 
 | #define R1MS_SHIFT 0 | 
 | #define R2MS_SHIFT 2 | 
 | #define R1MS_MASK (0x01 << (R1MS_SHIFT)) | 
 | #define R2MS_MASK (0x01 << (R2MS_SHIFT)) | 
 | #define R1DF_SHIFT 1 | 
 | #define R2DF_SHIFT 2 | 
 | #define R1DF_MASK (0x01 << (R1DF_SHIFT)) | 
 | #define R2DF_MASK (0x01 << (R2DF_SHIFT)) | 
 | #define R1FE_MASK 0x01 | 
 | #define R2FE_MASK 0x05 | 
 | #define TT1_SHIFT 0 | 
 | #define TT2_SHIFT 4 | 
 | #define TT_OFF 0 | 
 | #define TT_ON 1 | 
 | #define TT_MASK 7 | 
 | #define NATSEMI_MAN_ID	0x01 | 
 | #define LM95231_CHIP_ID	0xA1 | 
 | #define LM95241_CHIP_ID	0xA4 | 
 |  | 
 | static const u8 lm95241_reg_address[] = { | 
 | 	LM95241_REG_R_LOCAL_TEMPH, | 
 | 	LM95241_REG_R_LOCAL_TEMPL, | 
 | 	LM95241_REG_R_REMOTE1_TEMPH, | 
 | 	LM95241_REG_R_REMOTE1_TEMPL, | 
 | 	LM95241_REG_R_REMOTE2_TEMPH, | 
 | 	LM95241_REG_R_REMOTE2_TEMPL | 
 | }; | 
 |  | 
 | /* Client data (each client gets its own) */ | 
 | struct lm95241_data { | 
 | 	struct device *hwmon_dev; | 
 | 	struct mutex update_lock; | 
 | 	unsigned long last_updated, interval;	/* in jiffies */ | 
 | 	char valid;		/* zero until following fields are valid */ | 
 | 	/* registers values */ | 
 | 	u8 temp[ARRAY_SIZE(lm95241_reg_address)]; | 
 | 	u8 config, model, trutherm; | 
 | }; | 
 |  | 
 | /* Conversions */ | 
 | static int temp_from_reg_signed(u8 val_h, u8 val_l) | 
 | { | 
 | 	s16 val_hl = (val_h << 8) | val_l; | 
 | 	return val_hl * 1000 / 256; | 
 | } | 
 |  | 
 | static int temp_from_reg_unsigned(u8 val_h, u8 val_l) | 
 | { | 
 | 	u16 val_hl = (val_h << 8) | val_l; | 
 | 	return val_hl * 1000 / 256; | 
 | } | 
 |  | 
 | static struct lm95241_data *lm95241_update_device(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (time_after(jiffies, data->last_updated + data->interval) || | 
 | 	    !data->valid) { | 
 | 		int i; | 
 |  | 
 | 		dev_dbg(&client->dev, "Updating lm95241 data.\n"); | 
 | 		for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++) | 
 | 			data->temp[i] | 
 | 			  = i2c_smbus_read_byte_data(client, | 
 | 						     lm95241_reg_address[i]); | 
 | 		data->last_updated = jiffies; | 
 | 		data->valid = 1; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return data; | 
 | } | 
 |  | 
 | /* Sysfs stuff */ | 
 | static ssize_t show_input(struct device *dev, struct device_attribute *attr, | 
 | 			  char *buf) | 
 | { | 
 | 	struct lm95241_data *data = lm95241_update_device(dev); | 
 | 	int index = to_sensor_dev_attr(attr)->index; | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE - 1, "%d\n", | 
 | 			index == 0 || (data->config & (1 << (index / 2))) ? | 
 | 		temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : | 
 | 		temp_from_reg_unsigned(data->temp[index], | 
 | 				       data->temp[index + 1])); | 
 | } | 
 |  | 
 | static ssize_t show_type(struct device *dev, struct device_attribute *attr, | 
 | 			 char *buf) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE - 1, | 
 | 		data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n"); | 
 | } | 
 |  | 
 | static ssize_t set_type(struct device *dev, struct device_attribute *attr, | 
 | 			const char *buf, size_t count) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 | 	unsigned long val; | 
 | 	int shift; | 
 | 	u8 mask = to_sensor_dev_attr(attr)->index; | 
 |  | 
 | 	if (kstrtoul(buf, 10, &val) < 0) | 
 | 		return -EINVAL; | 
 | 	if (val != 1 && val != 2) | 
 | 		return -EINVAL; | 
 |  | 
 | 	shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	data->trutherm &= ~(TT_MASK << shift); | 
 | 	if (val == 1) { | 
 | 		data->model |= mask; | 
 | 		data->trutherm |= (TT_ON << shift); | 
 | 	} else { | 
 | 		data->model &= ~mask; | 
 | 		data->trutherm |= (TT_OFF << shift); | 
 | 	} | 
 | 	data->valid = 0; | 
 |  | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, | 
 | 				  data->model); | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, | 
 | 				  data->trutherm); | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t show_min(struct device *dev, struct device_attribute *attr, | 
 | 			char *buf) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE - 1, | 
 | 			data->config & to_sensor_dev_attr(attr)->index ? | 
 | 			"-127000\n" : "0\n"); | 
 | } | 
 |  | 
 | static ssize_t set_min(struct device *dev, struct device_attribute *attr, | 
 | 		       const char *buf, size_t count) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 | 	long val; | 
 |  | 
 | 	if (kstrtol(buf, 10, &val) < 0) | 
 | 		return -EINVAL; | 
 | 	if (val < -128000) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (val < 0) | 
 | 		data->config |= to_sensor_dev_attr(attr)->index; | 
 | 	else | 
 | 		data->config &= ~to_sensor_dev_attr(attr)->index; | 
 | 	data->valid = 0; | 
 |  | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t show_max(struct device *dev, struct device_attribute *attr, | 
 | 			char *buf) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE - 1, | 
 | 			data->config & to_sensor_dev_attr(attr)->index ? | 
 | 			"127000\n" : "255000\n"); | 
 | } | 
 |  | 
 | static ssize_t set_max(struct device *dev, struct device_attribute *attr, | 
 | 		       const char *buf, size_t count) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 | 	long val; | 
 |  | 
 | 	if (kstrtol(buf, 10, &val) < 0) | 
 | 		return -EINVAL; | 
 | 	if (val >= 256000) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (val <= 127000) | 
 | 		data->config |= to_sensor_dev_attr(attr)->index; | 
 | 	else | 
 | 		data->config &= ~to_sensor_dev_attr(attr)->index; | 
 | 	data->valid = 0; | 
 |  | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t show_interval(struct device *dev, struct device_attribute *attr, | 
 | 			     char *buf) | 
 | { | 
 | 	struct lm95241_data *data = lm95241_update_device(dev); | 
 |  | 
 | 	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval | 
 | 			/ HZ); | 
 | } | 
 |  | 
 | static ssize_t set_interval(struct device *dev, struct device_attribute *attr, | 
 | 			    const char *buf, size_t count) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 | 	unsigned long val; | 
 |  | 
 | 	if (kstrtoul(buf, 10, &val) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	data->interval = val * HZ / 1000; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); | 
 | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); | 
 | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4); | 
 | static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type, | 
 | 			  R1MS_MASK); | 
 | static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type, | 
 | 			  R2MS_MASK); | 
 | static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, | 
 | 			  R1DF_MASK); | 
 | static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, | 
 | 			  R2DF_MASK); | 
 | static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, | 
 | 			  R1DF_MASK); | 
 | static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, | 
 | 			  R2DF_MASK); | 
 | static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, | 
 | 		   set_interval); | 
 |  | 
 | static struct attribute *lm95241_attributes[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp3_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_type.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp3_type.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_min.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp3_min.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_max.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp3_max.dev_attr.attr, | 
 | 	&dev_attr_update_interval.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group lm95241_group = { | 
 | 	.attrs = lm95241_attributes, | 
 | }; | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int lm95241_detect(struct i2c_client *new_client, | 
 | 			  struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = new_client->adapter; | 
 | 	const char *name; | 
 | 	int mfg_id, chip_id; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID); | 
 | 	if (mfg_id != NATSEMI_MAN_ID) | 
 | 		return -ENODEV; | 
 |  | 
 | 	chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID); | 
 | 	switch (chip_id) { | 
 | 	case LM95231_CHIP_ID: | 
 | 		name = "lm95231"; | 
 | 		break; | 
 | 	case LM95241_CHIP_ID: | 
 | 		name = "lm95241"; | 
 | 		break; | 
 | 	default: | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* Fill the i2c board info */ | 
 | 	strlcpy(info->type, name, I2C_NAME_SIZE); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void lm95241_init_client(struct i2c_client *client) | 
 | { | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	data->interval = HZ;	/* 1 sec default */ | 
 | 	data->valid = 0; | 
 | 	data->config = CFG_CR0076; | 
 | 	data->model = 0; | 
 | 	data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); | 
 |  | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER, | 
 | 				  R1FE_MASK | R2FE_MASK); | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, | 
 | 				  data->trutherm); | 
 | 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, | 
 | 				  data->model); | 
 | } | 
 |  | 
 | static int lm95241_probe(struct i2c_client *new_client, | 
 | 			 const struct i2c_device_id *id) | 
 | { | 
 | 	struct lm95241_data *data; | 
 | 	int err; | 
 |  | 
 | 	data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL); | 
 | 	if (!data) { | 
 | 		err = -ENOMEM; | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(new_client, data); | 
 | 	mutex_init(&data->update_lock); | 
 |  | 
 | 	/* Initialize the LM95241 chip */ | 
 | 	lm95241_init_client(new_client); | 
 |  | 
 | 	/* Register sysfs hooks */ | 
 | 	err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group); | 
 | 	if (err) | 
 | 		goto exit_free; | 
 |  | 
 | 	data->hwmon_dev = hwmon_device_register(&new_client->dev); | 
 | 	if (IS_ERR(data->hwmon_dev)) { | 
 | 		err = PTR_ERR(data->hwmon_dev); | 
 | 		goto exit_remove_files; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | exit_remove_files: | 
 | 	sysfs_remove_group(&new_client->dev.kobj, &lm95241_group); | 
 | exit_free: | 
 | 	kfree(data); | 
 | exit: | 
 | 	return err; | 
 | } | 
 |  | 
 | static int lm95241_remove(struct i2c_client *client) | 
 | { | 
 | 	struct lm95241_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	hwmon_device_unregister(data->hwmon_dev); | 
 | 	sysfs_remove_group(&client->dev.kobj, &lm95241_group); | 
 |  | 
 | 	kfree(data); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Driver data (common to all clients) */ | 
 | static const struct i2c_device_id lm95241_id[] = { | 
 | 	{ "lm95231", 0 }, | 
 | 	{ "lm95241", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, lm95241_id); | 
 |  | 
 | static struct i2c_driver lm95241_driver = { | 
 | 	.class		= I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= DEVNAME, | 
 | 	}, | 
 | 	.probe		= lm95241_probe, | 
 | 	.remove		= lm95241_remove, | 
 | 	.id_table	= lm95241_id, | 
 | 	.detect		= lm95241_detect, | 
 | 	.address_list	= normal_i2c, | 
 | }; | 
 |  | 
 | module_i2c_driver(lm95241_driver); | 
 |  | 
 | MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>"); | 
 | MODULE_DESCRIPTION("LM95241 sensor driver"); | 
 | MODULE_LICENSE("GPL"); |