[ALSA] clean up card features
EMU10K1/EMU10K2 driver
This patch converts the emu10k1 driver to use the card capabilities
structure for some more things.
Not extensively tested but seems to work.
Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index b9fa2e8..0529fb2 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -1077,7 +1077,7 @@
gpr += 2;
/* PCM Side Playback (independent from stereo mix) */
- if (emu->spk71) {
+ if (emu->card_capabilities->spk71) {
A_OP(icode, &ptr, iMAC0, A_GPR(playback+6), A_C_00000000, A_GPR(gpr), A_FXBUS(FXBUS_PCM_LEFT_SIDE));
A_OP(icode, &ptr, iMAC0, A_GPR(playback+7), A_C_00000000, A_GPR(gpr+1), A_FXBUS(FXBUS_PCM_RIGHT_SIDE));
snd_emu10k1_init_stereo_control(&controls[nctl++], "PCM Side Playback Volume", gpr, 100);
@@ -1145,14 +1145,14 @@
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_SPDIF_CD_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_SPDIF_CD_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "CD Playback Volume" : "Audigy CD Playback Volume",
+ emu->card_capabilities->ac97_chip ? "Audigy CD Playback Volume" : "CD Playback Volume",
gpr, 0);
gpr += 2;
/* Audigy CD Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_SPDIF_CD_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_SPDIF_CD_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "CD Capture Volume" : "Audigy CD Capture Volume",
+ emu->card_capabilities->ac97_chip ? "Audigy CD Capture Volume" : "CD Capture Volume",
gpr, 0);
gpr += 2;
@@ -1171,14 +1171,14 @@
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_LINE2_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_LINE2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "Line Playback Volume" : "Line2 Playback Volume",
+ emu->card_capabilities->ac97_chip ? "Line2 Playback Volume" : "Line Playback Volume",
gpr, 0);
gpr += 2;
/* Line2 Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_LINE2_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_LINE2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "Line Capture Volume" : "Line2 Capture Volume",
+ emu->card_capabilities->ac97_chip ? "Line2 Capture Volume" : "Line Capture Volume",
gpr, 0);
gpr += 2;
@@ -1197,14 +1197,14 @@
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_AUX2_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_AUX2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "Aux Playback Volume" : "Aux2 Playback Volume",
+ emu->card_capabilities->ac97_chip ? "Aux2 Playback Volume" : "Aux Playback Volume",
gpr, 0);
gpr += 2;
/* Aux2 Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_AUX2_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_AUX2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
- emu->no_ac97 ? "Aux Capture Volume" : "Aux2 Capture Volume",
+ emu->card_capabilities->ac97_chip ? "Aux2 Capture Volume" : "Aux Capture Volume",
gpr, 0);
gpr += 2;
@@ -1232,7 +1232,7 @@
snd_emu10k1_init_mono_control(&controls[nctl++], "LFE Playback Volume", gpr, 0);
gpr++;
- if (emu->spk71) {
+ if (emu->card_capabilities->spk71) {
/* Stereo Mix Side Playback */
A_OP(icode, &ptr, iMAC0, A_GPR(playback+6), A_GPR(playback+6), A_GPR(gpr), A_GPR(stereo_mix));
A_OP(icode, &ptr, iMAC0, A_GPR(playback+7), A_GPR(playback+7), A_GPR(gpr+1), A_GPR(stereo_mix+1));
@@ -1266,7 +1266,7 @@
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 3), A_GPR(playback + 3), A_C_00000000, A_C_00000000); /* rear right */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 4), A_GPR(playback + 4), A_C_00000000, A_C_00000000); /* center */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 5), A_GPR(playback + 5), A_C_00000000, A_C_00000000); /* LFE */
- if (emu->spk71) {
+ if (emu->card_capabilities->spk71) {
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 6), A_GPR(playback + 6), A_C_00000000, A_C_00000000); /* side left */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 7), A_GPR(playback + 7), A_C_00000000, A_C_00000000); /* side right */
}
@@ -1359,7 +1359,7 @@
A_PUT_STEREO_OUTPUT(A_EXTOUT_AREAR_L, A_EXTOUT_AREAR_R, playback+2 + SND_EMU10K1_PLAYBACK_CHANNELS);
A_PUT_OUTPUT(A_EXTOUT_ACENTER, playback+4 + SND_EMU10K1_PLAYBACK_CHANNELS);
A_PUT_OUTPUT(A_EXTOUT_ALFE, playback+5 + SND_EMU10K1_PLAYBACK_CHANNELS);
- if (emu->spk71)
+ if (emu->card_capabilities->spk71)
A_PUT_STEREO_OUTPUT(A_EXTOUT_ASIDE_L, A_EXTOUT_ASIDE_R, playback+6 + SND_EMU10K1_PLAYBACK_CHANNELS);
/* headphone */
@@ -1982,22 +1982,27 @@
OP(icode, &ptr, iACC3, EXTOUT(EXTOUT_MIC_CAP), GPR(capture + 2), C_00000000, C_00000000);
/* EFX capture - capture the 16 EXTINS */
- OP(icode, &ptr, iACC3, FXBUS2(14), C_00000000, C_00000000, EXTIN(0));
- OP(icode, &ptr, iACC3, FXBUS2(15), C_00000000, C_00000000, EXTIN(1));
- OP(icode, &ptr, iACC3, FXBUS2(0), C_00000000, C_00000000, EXTIN(2));
- OP(icode, &ptr, iACC3, FXBUS2(3), C_00000000, C_00000000, EXTIN(3));
- /* Dont connect anything to FXBUS2 1 and 2. These are shared with
- * Center/LFE on the SBLive 5.1. The kX driver only changes the
- * routing when it detects an SBLive 5.1.
- *
- * Since only 14 of the 16 EXTINs are used, this is not a big problem.
- * We route AC97L and R to FX capture 14 and 15, SPDIF CD in to FX capture
- * 0 and 3, then the rest of the EXTINs to the corresponding FX capture
- * channel.
- */
- for (z = 4; z < 14; z++) {
- OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
+ if (emu->card_capabilities->sblive51) {
+ /* On the Live! 5.1, FXBUS2(1) and FXBUS(2) are shared with EXTOUT_ACENTER
+ * and EXTOUT_ALFE, so we can't connect inputs to them for multitrack recording.
+ *
+ * Since only 14 of the 16 EXTINs are used, this is not a big problem.
+ * We route AC97L and R to FX capture 14 and 15, SPDIF CD in to FX capture
+ * 0 and 3, then the rest of the EXTINs to the corresponding FX capture
+ * channel. Multitrack recorders will still see the center/lfe output signal
+ * on the second and third channels.
+ */
+ OP(icode, &ptr, iACC3, FXBUS2(14), C_00000000, C_00000000, EXTIN(0));
+ OP(icode, &ptr, iACC3, FXBUS2(15), C_00000000, C_00000000, EXTIN(1));
+ OP(icode, &ptr, iACC3, FXBUS2(0), C_00000000, C_00000000, EXTIN(2));
+ OP(icode, &ptr, iACC3, FXBUS2(3), C_00000000, C_00000000, EXTIN(3));
+ for (z = 4; z < 14; z++)
+ OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
+ } else {
+ for (z = 0; z < 16; z++)
+ OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
}
+
if (gpr > tmp) {
snd_BUG();
@@ -2128,7 +2133,6 @@
int res;
memset(info, 0, sizeof(info));
- info->card = emu->card_type;
info->internal_tram_size = emu->fx8010.itram_size;
info->external_tram_size = emu->fx8010.etram_pages.bytes / 2;
fxbus = fxbuses;