| /* | 
 |  * OMAP3-specific clock framework functions | 
 |  * | 
 |  * Copyright (C) 2007-2008 Texas Instruments, Inc. | 
 |  * Copyright (C) 2007-2011 Nokia Corporation | 
 |  * | 
 |  * Paul Walmsley | 
 |  * Jouni Högander | 
 |  * | 
 |  * Parts of this code are based on code written by | 
 |  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, | 
 |  * Russell King | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 | #undef DEBUG | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/io.h> | 
 |  | 
 | #include <plat/clock.h> | 
 |  | 
 | #include "clock.h" | 
 | #include "clock34xx.h" | 
 | #include "cm2xxx_3xxx.h" | 
 | #include "cm-regbits-34xx.h" | 
 |  | 
 | /** | 
 |  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI | 
 |  * @clk: struct clk * being enabled | 
 |  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into | 
 |  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into | 
 |  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator | 
 |  * | 
 |  * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift | 
 |  * from the CM_{I,F}CLKEN bit.  Pass back the correct info via | 
 |  * @idlest_reg and @idlest_bit.  No return value. | 
 |  */ | 
 | static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, | 
 | 					    void __iomem **idlest_reg, | 
 | 					    u8 *idlest_bit, | 
 | 					    u8 *idlest_val) | 
 | { | 
 | 	u32 r; | 
 |  | 
 | 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); | 
 | 	*idlest_reg = (__force void __iomem *)r; | 
 | 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; | 
 | 	*idlest_val = OMAP34XX_CM_IDLEST_VAL; | 
 | } | 
 |  | 
 | const struct clkops clkops_omap3430es2_ssi_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_ssi_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | }; | 
 |  | 
 | const struct clkops clkops_omap3430es2_iclk_ssi_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_ssi_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | 	.allow_idle	= omap2_clkt_iclk_allow_idle, | 
 | 	.deny_idle	= omap2_clkt_iclk_deny_idle, | 
 | }; | 
 |  | 
 | /** | 
 |  * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST | 
 |  * @clk: struct clk * being enabled | 
 |  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into | 
 |  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into | 
 |  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator | 
 |  * | 
 |  * Some OMAP modules on OMAP3 ES2+ chips have both initiator and | 
 |  * target IDLEST bits.  For our purposes, we are concerned with the | 
 |  * target IDLEST bits, which exist at a different bit position than | 
 |  * the *CLKEN bit position for these modules (DSS and USBHOST) (The | 
 |  * default find_idlest code assumes that they are at the same | 
 |  * position.)  No return value. | 
 |  */ | 
 | static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, | 
 | 						    void __iomem **idlest_reg, | 
 | 						    u8 *idlest_bit, | 
 | 						    u8 *idlest_val) | 
 | { | 
 | 	u32 r; | 
 |  | 
 | 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); | 
 | 	*idlest_reg = (__force void __iomem *)r; | 
 | 	/* USBHOST_IDLE has same shift */ | 
 | 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; | 
 | 	*idlest_val = OMAP34XX_CM_IDLEST_VAL; | 
 | } | 
 |  | 
 | const struct clkops clkops_omap3430es2_dss_usbhost_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | }; | 
 |  | 
 | const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | 	.allow_idle	= omap2_clkt_iclk_allow_idle, | 
 | 	.deny_idle	= omap2_clkt_iclk_deny_idle, | 
 | }; | 
 |  | 
 | /** | 
 |  * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB | 
 |  * @clk: struct clk * being enabled | 
 |  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into | 
 |  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into | 
 |  * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator | 
 |  * | 
 |  * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different | 
 |  * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via | 
 |  * @idlest_reg and @idlest_bit.  No return value. | 
 |  */ | 
 | static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, | 
 | 						 void __iomem **idlest_reg, | 
 | 						 u8 *idlest_bit, | 
 | 						 u8 *idlest_val) | 
 | { | 
 | 	u32 r; | 
 |  | 
 | 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); | 
 | 	*idlest_reg = (__force void __iomem *)r; | 
 | 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; | 
 | 	*idlest_val = OMAP34XX_CM_IDLEST_VAL; | 
 | } | 
 |  | 
 | const struct clkops clkops_omap3430es2_hsotgusb_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | }; | 
 |  | 
 | const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait = { | 
 | 	.enable		= omap2_dflt_clk_enable, | 
 | 	.disable	= omap2_dflt_clk_disable, | 
 | 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest, | 
 | 	.find_companion = omap2_clk_dflt_find_companion, | 
 | 	.allow_idle	= omap2_clkt_iclk_allow_idle, | 
 | 	.deny_idle	= omap2_clkt_iclk_deny_idle, | 
 | }; |