ixgbe: Implement HAVE_SET_RX_MODE
Implement HAVE_SET_RX_MODE in the driver for MC and UC lists.
Signed-off-by: Christopher Leech <christopher.leech@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b14192f..87ef2db 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1619,23 +1619,37 @@
}
}
+static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
+{
+ struct dev_mc_list *mc_ptr;
+ u8 *addr = *mc_addr_ptr;
+ *vmdq = 0;
+
+ mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]);
+ if (mc_ptr->next)
+ *mc_addr_ptr = mc_ptr->next->dmi_addr;
+ else
+ *mc_addr_ptr = NULL;
+
+ return addr;
+}
+
/**
- * ixgbe_set_multi - Multicast and Promiscuous mode set
+ * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
+ * The set_rx_method entry point is called whenever the unicast/multicast
+ * address list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast and
+ * promiscuous mode.
**/
-static void ixgbe_set_multi(struct net_device *netdev)
+static void ixgbe_set_rx_mode(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
- struct dev_mc_list *mc_ptr;
- u8 *mta_list;
u32 fctrl, vlnctrl;
- int i;
+ u8 *addr_list = NULL;
+ int addr_count = 0;
/* Check for Promiscuous and All Multicast modes */
@@ -1643,6 +1657,7 @@
vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
if (netdev->flags & IFF_PROMISC) {
+ hw->addr_ctrl.user_set_promisc = 1;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
vlnctrl &= ~IXGBE_VLNCTRL_VFE;
} else {
@@ -1653,33 +1668,25 @@
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
}
vlnctrl |= IXGBE_VLNCTRL_VFE;
+ hw->addr_ctrl.user_set_promisc = 0;
}
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
- if (netdev->mc_count) {
- mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
- if (!mta_list)
- return;
+ /* reprogram secondary unicast list */
+ addr_count = netdev->uc_count;
+ if (addr_count)
+ addr_list = netdev->uc_list->dmi_addr;
+ ixgbe_update_uc_addr_list(hw, addr_list, addr_count,
+ ixgbe_addr_list_itr);
- /* Shared function expects packed array of only addresses. */
- mc_ptr = netdev->mc_list;
-
- for (i = 0; i < netdev->mc_count; i++) {
- if (!mc_ptr)
- break;
- memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr,
- ETH_ALEN);
- mc_ptr = mc_ptr->next;
- }
-
- ixgbe_update_mc_addr_list(hw, mta_list, i, 0);
- kfree(mta_list);
- } else {
- ixgbe_update_mc_addr_list(hw, NULL, 0, 0);
- }
-
+ /* reprogram multicast list */
+ addr_count = netdev->mc_count;
+ if (addr_count)
+ addr_list = netdev->mc_list->dmi_addr;
+ ixgbe_update_mc_addr_list(hw, addr_list, addr_count,
+ ixgbe_addr_list_itr);
}
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -1723,7 +1730,7 @@
struct net_device *netdev = adapter->netdev;
int i;
- ixgbe_set_multi(netdev);
+ ixgbe_set_rx_mode(netdev);
ixgbe_restore_vlan(adapter);
@@ -3508,7 +3515,8 @@
netdev->stop = &ixgbe_close;
netdev->hard_start_xmit = &ixgbe_xmit_frame;
netdev->get_stats = &ixgbe_get_stats;
- netdev->set_multicast_list = &ixgbe_set_multi;
+ netdev->set_rx_mode = &ixgbe_set_rx_mode;
+ netdev->set_multicast_list = &ixgbe_set_rx_mode;
netdev->set_mac_address = &ixgbe_set_mac;
netdev->change_mtu = &ixgbe_change_mtu;
ixgbe_set_ethtool_ops(netdev);