| /* | 
 |  * leon_pci.c: LEON Host PCI support | 
 |  * | 
 |  * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom | 
 |  * | 
 |  * Code is partially derived from pcic.c | 
 |  */ | 
 |  | 
 | #include <linux/of_device.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/pci.h> | 
 | #include <asm/leon.h> | 
 | #include <asm/leon_pci.h> | 
 |  | 
 | /* The LEON architecture does not rely on a BIOS or bootloader to setup | 
 |  * PCI for us. The Linux generic routines are used to setup resources, | 
 |  * reset values of confuration-space registers settings ae preseved. | 
 |  */ | 
 | void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) | 
 | { | 
 | 	struct pci_bus *root_bus; | 
 |  | 
 | 	root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info); | 
 | 	if (root_bus) { | 
 | 		root_bus->resource[0] = &info->io_space; | 
 | 		root_bus->resource[1] = &info->mem_space; | 
 | 		root_bus->resource[2] = NULL; | 
 |  | 
 | 		/* Init all PCI devices into PCI tree */ | 
 | 		pci_bus_add_devices(root_bus); | 
 |  | 
 | 		/* Setup IRQs of all devices using custom routines */ | 
 | 		pci_fixup_irqs(pci_common_swizzle, info->map_irq); | 
 |  | 
 | 		/* Assign devices with resources */ | 
 | 		pci_assign_unassigned_resources(); | 
 | 	} | 
 | } | 
 |  | 
 | /* PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is | 
 |  * accessed through a Window which is translated to low 64KB in PCI space, the | 
 |  * first 4KB is not used so 60KB is available. | 
 |  * | 
 |  * This function is used by generic code to translate resource addresses into | 
 |  * PCI addresses. | 
 |  */ | 
 | void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | 
 | 			     struct resource *res) | 
 | { | 
 | 	struct leon_pci_info *info = dev->bus->sysdata; | 
 |  | 
 | 	region->start = res->start; | 
 | 	region->end = res->end; | 
 |  | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		region->start -= (info->io_space.start - 0x1000); | 
 | 		region->end -= (info->io_space.start - 0x1000); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(pcibios_resource_to_bus); | 
 |  | 
 | /* see pcibios_resource_to_bus() comment */ | 
 | void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, | 
 | 			     struct pci_bus_region *region) | 
 | { | 
 | 	struct leon_pci_info *info = dev->bus->sysdata; | 
 |  | 
 | 	res->start = region->start; | 
 | 	res->end = region->end; | 
 |  | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		res->start += (info->io_space.start - 0x1000); | 
 | 		res->end += (info->io_space.start - 0x1000); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(pcibios_bus_to_resource); | 
 |  | 
 | void __devinit pcibios_fixup_bus(struct pci_bus *pbus) | 
 | { | 
 | 	struct leon_pci_info *info = pbus->sysdata; | 
 | 	struct pci_dev *dev; | 
 | 	int i, has_io, has_mem; | 
 | 	u16 cmd; | 
 |  | 
 | 	/* Generic PCI bus probing sets these to point at | 
 | 	 * &io{port,mem}_resouce which is wrong for us. | 
 | 	 */ | 
 | 	if (pbus->self == NULL) { | 
 | 		pbus->resource[0] = &info->io_space; | 
 | 		pbus->resource[1] = &info->mem_space; | 
 | 		pbus->resource[2] = NULL; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(dev, &pbus->devices, bus_list) { | 
 | 		/* | 
 | 		 * We can not rely on that the bootloader has enabled I/O | 
 | 		 * or memory access to PCI devices. Instead we enable it here | 
 | 		 * if the device has BARs of respective type. | 
 | 		 */ | 
 | 		has_io = has_mem = 0; | 
 | 		for (i = 0; i < PCI_ROM_RESOURCE; i++) { | 
 | 			unsigned long f = dev->resource[i].flags; | 
 | 			if (f & IORESOURCE_IO) | 
 | 				has_io = 1; | 
 | 			else if (f & IORESOURCE_MEM) | 
 | 				has_mem = 1; | 
 | 		} | 
 | 		/* ROM BARs are mapped into 32-bit memory space */ | 
 | 		if (dev->resource[PCI_ROM_RESOURCE].end != 0) { | 
 | 			dev->resource[PCI_ROM_RESOURCE].flags |= | 
 | 							IORESOURCE_ROM_ENABLE; | 
 | 			has_mem = 1; | 
 | 		} | 
 | 		pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd); | 
 | 		if (has_io && !(cmd & PCI_COMMAND_IO)) { | 
 | #ifdef CONFIG_PCI_DEBUG | 
 | 			printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n", | 
 | 					 pci_name(dev)); | 
 | #endif | 
 | 			cmd |= PCI_COMMAND_IO; | 
 | 			pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, | 
 | 									cmd); | 
 | 		} | 
 | 		if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) { | 
 | #ifdef CONFIG_PCI_DEBUG | 
 | 			printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev" | 
 | 					 "%s\n", pci_name(dev)); | 
 | #endif | 
 | 			cmd |= PCI_COMMAND_MEMORY; | 
 | 			pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, | 
 | 									cmd); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Other archs parse arguments here. | 
 |  */ | 
 | char * __devinit pcibios_setup(char *str) | 
 | { | 
 | 	return str; | 
 | } | 
 |  | 
 | resource_size_t pcibios_align_resource(void *data, const struct resource *res, | 
 | 				resource_size_t size, resource_size_t align) | 
 | { | 
 | 	return res->start; | 
 | } | 
 |  | 
 | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
 | { | 
 | 	return pci_enable_resources(dev, mask); | 
 | } | 
 |  | 
 | struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) | 
 | { | 
 | 	/* | 
 | 	 * Currently the OpenBoot nodes are not connected with the PCI device, | 
 | 	 * this is because the LEON PROM does not create PCI nodes. Eventually | 
 | 	 * this will change and the same approach as pcic.c can be used to | 
 | 	 * match PROM nodes with pci devices. | 
 | 	 */ | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(pci_device_to_OF_node); | 
 |  | 
 | void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) | 
 | { | 
 | #ifdef CONFIG_PCI_DEBUG | 
 | 	printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq, | 
 | 		pci_name(dev)); | 
 | #endif | 
 | 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); | 
 | } | 
 |  | 
 | /* in/out routines taken from pcic.c | 
 |  * | 
 |  * This probably belongs here rather than ioport.c because | 
 |  * we do not want this crud linked into SBus kernels. | 
 |  * Also, think for a moment about likes of floppy.c that | 
 |  * include architecture specific parts. They may want to redefine ins/outs. | 
 |  * | 
 |  * We do not use horrible macros here because we want to | 
 |  * advance pointer by sizeof(size). | 
 |  */ | 
 | void outsb(unsigned long addr, const void *src, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 1; | 
 | 		outb(*(const char *)src, addr); | 
 | 		src += 1; | 
 | 		/* addr += 1; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(outsb); | 
 |  | 
 | void outsw(unsigned long addr, const void *src, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 2; | 
 | 		outw(*(const short *)src, addr); | 
 | 		src += 2; | 
 | 		/* addr += 2; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(outsw); | 
 |  | 
 | void outsl(unsigned long addr, const void *src, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 4; | 
 | 		outl(*(const long *)src, addr); | 
 | 		src += 4; | 
 | 		/* addr += 4; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(outsl); | 
 |  | 
 | void insb(unsigned long addr, void *dst, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 1; | 
 | 		*(unsigned char *)dst = inb(addr); | 
 | 		dst += 1; | 
 | 		/* addr += 1; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(insb); | 
 |  | 
 | void insw(unsigned long addr, void *dst, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 2; | 
 | 		*(unsigned short *)dst = inw(addr); | 
 | 		dst += 2; | 
 | 		/* addr += 2; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(insw); | 
 |  | 
 | void insl(unsigned long addr, void *dst, unsigned long count) | 
 | { | 
 | 	while (count) { | 
 | 		count -= 4; | 
 | 		/* | 
 | 		 * XXX I am sure we are in for an unaligned trap here. | 
 | 		 */ | 
 | 		*(unsigned long *)dst = inl(addr); | 
 | 		dst += 4; | 
 | 		/* addr += 4; */ | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(insl); |