|  | /* | 
|  | * mac80211 work implementation | 
|  | * | 
|  | * Copyright 2003-2008, Jouni Malinen <j@w1.fi> | 
|  | * Copyright 2004, Instant802 Networks, Inc. | 
|  | * Copyright 2005, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
|  | * Copyright 2009, Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "rate.h" | 
|  |  | 
|  | #define IEEE80211_AUTH_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_AUTH_MAX_TRIES 3 | 
|  | #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_ASSOC_MAX_TRIES 3 | 
|  |  | 
|  | enum work_action { | 
|  | WORK_ACT_MISMATCH, | 
|  | WORK_ACT_NONE, | 
|  | WORK_ACT_TIMEOUT, | 
|  | WORK_ACT_DONE, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* utils */ | 
|  | static inline void ASSERT_WORK_MTX(struct ieee80211_local *local) | 
|  | { | 
|  | lockdep_assert_held(&local->mtx); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We can have multiple work items (and connection probing) | 
|  | * scheduling this timer, but we need to take care to only | 
|  | * reschedule it when it should fire _earlier_ than it was | 
|  | * asked for before, or if it's not pending right now. This | 
|  | * function ensures that. Note that it then is required to | 
|  | * run this function for all timeouts after the first one | 
|  | * has happened -- the work that runs from this timer will | 
|  | * do that. | 
|  | */ | 
|  | static void run_again(struct ieee80211_local *local, | 
|  | unsigned long timeout) | 
|  | { | 
|  | ASSERT_WORK_MTX(local); | 
|  |  | 
|  | if (!timer_pending(&local->work_timer) || | 
|  | time_before(timeout, local->work_timer.expires)) | 
|  | mod_timer(&local->work_timer, timeout); | 
|  | } | 
|  |  | 
|  | void free_work(struct ieee80211_work *wk) | 
|  | { | 
|  | kfree_rcu(wk, rcu_head); | 
|  | } | 
|  |  | 
|  | static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len, | 
|  | struct ieee80211_supported_band *sband, | 
|  | u32 *rates) | 
|  | { | 
|  | int i, j, count; | 
|  | *rates = 0; | 
|  | count = 0; | 
|  | for (i = 0; i < supp_rates_len; i++) { | 
|  | int rate = (supp_rates[i] & 0x7F) * 5; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | *rates |= BIT(j); | 
|  | count++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /* frame sending functions */ | 
|  |  | 
|  | static void ieee80211_add_ht_ie(struct sk_buff *skb, const u8 *ht_info_ie, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_channel *channel, | 
|  | enum ieee80211_smps_mode smps) | 
|  | { | 
|  | struct ieee80211_ht_info *ht_info; | 
|  | u8 *pos; | 
|  | u32 flags = channel->flags; | 
|  | u16 cap = sband->ht_cap.cap; | 
|  | __le16 tmp; | 
|  |  | 
|  | if (!sband->ht_cap.ht_supported) | 
|  | return; | 
|  |  | 
|  | if (!ht_info_ie) | 
|  | return; | 
|  |  | 
|  | if (ht_info_ie[1] < sizeof(struct ieee80211_ht_info)) | 
|  | return; | 
|  |  | 
|  | ht_info = (struct ieee80211_ht_info *)(ht_info_ie + 2); | 
|  |  | 
|  | /* determine capability flags */ | 
|  |  | 
|  | switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40PLUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40MINUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* set SM PS mode properly */ | 
|  | cap &= ~IEEE80211_HT_CAP_SM_PS; | 
|  | switch (smps) { | 
|  | case IEEE80211_SMPS_AUTOMATIC: | 
|  | case IEEE80211_SMPS_NUM_MODES: | 
|  | WARN_ON(1); | 
|  | case IEEE80211_SMPS_OFF: | 
|  | cap |= WLAN_HT_CAP_SM_PS_DISABLED << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | case IEEE80211_SMPS_STATIC: | 
|  | cap |= WLAN_HT_CAP_SM_PS_STATIC << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | case IEEE80211_SMPS_DYNAMIC: | 
|  | cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* reserve and fill IE */ | 
|  |  | 
|  | pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); | 
|  | *pos++ = WLAN_EID_HT_CAPABILITY; | 
|  | *pos++ = sizeof(struct ieee80211_ht_cap); | 
|  | memset(pos, 0, sizeof(struct ieee80211_ht_cap)); | 
|  |  | 
|  | /* capability flags */ | 
|  | tmp = cpu_to_le16(cap); | 
|  | memcpy(pos, &tmp, sizeof(u16)); | 
|  | pos += sizeof(u16); | 
|  |  | 
|  | /* AMPDU parameters */ | 
|  | *pos++ = sband->ht_cap.ampdu_factor | | 
|  | (sband->ht_cap.ampdu_density << | 
|  | IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT); | 
|  |  | 
|  | /* MCS set */ | 
|  | memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs)); | 
|  | pos += sizeof(sband->ht_cap.mcs); | 
|  |  | 
|  | /* extended capabilities */ | 
|  | pos += sizeof(__le16); | 
|  |  | 
|  | /* BF capabilities */ | 
|  | pos += sizeof(__le32); | 
|  |  | 
|  | /* antenna selection */ | 
|  | pos += sizeof(u8); | 
|  | } | 
|  |  | 
|  | static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_work *wk) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u8 *pos, qos_info; | 
|  | size_t offset = 0, noffset; | 
|  | int i, count, rates_len, supp_rates_len; | 
|  | u16 capab; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u32 rates = 0; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[wk->chan->band]; | 
|  |  | 
|  | if (wk->assoc.supp_rates_len) { | 
|  | /* | 
|  | * Get all rates supported by the device and the AP as | 
|  | * some APs don't like getting a superset of their rates | 
|  | * in the association request (e.g. D-Link DAP 1353 in | 
|  | * b-only mode)... | 
|  | */ | 
|  | rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates, | 
|  | wk->assoc.supp_rates_len, | 
|  | sband, &rates); | 
|  | } else { | 
|  | /* | 
|  | * In case AP not provide any supported rates information | 
|  | * before association, we send information element(s) with | 
|  | * all rates that we support. | 
|  | */ | 
|  | rates = ~0; | 
|  | rates_len = sband->n_bitrates; | 
|  | } | 
|  |  | 
|  | skb = alloc_skb(local->hw.extra_tx_headroom + | 
|  | sizeof(*mgmt) + /* bit too much but doesn't matter */ | 
|  | 2 + wk->assoc.ssid_len + /* SSID */ | 
|  | 4 + rates_len + /* (extended) rates */ | 
|  | 4 + /* power capability */ | 
|  | 2 + 2 * sband->n_channels + /* supported channels */ | 
|  | 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ | 
|  | wk->ie_len + /* extra IEs */ | 
|  | 9, /* WMM */ | 
|  | GFP_KERNEL); | 
|  | if (!skb) { | 
|  | printk(KERN_DEBUG "%s: failed to allocate buffer for assoc " | 
|  | "frame\n", sdata->name); | 
|  | return; | 
|  | } | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | capab = WLAN_CAPABILITY_ESS; | 
|  |  | 
|  | if (sband->band == IEEE80211_BAND_2GHZ) { | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; | 
|  | } | 
|  |  | 
|  | if (wk->assoc.capability & WLAN_CAPABILITY_PRIVACY) | 
|  | capab |= WLAN_CAPABILITY_PRIVACY; | 
|  |  | 
|  | if ((wk->assoc.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && | 
|  | (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) | 
|  | capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
|  | memset(mgmt, 0, 24); | 
|  | memcpy(mgmt->da, wk->filter_ta, ETH_ALEN); | 
|  | memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, wk->filter_ta, ETH_ALEN); | 
|  |  | 
|  | if (!is_zero_ether_addr(wk->assoc.prev_bssid)) { | 
|  | skb_put(skb, 10); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_REASSOC_REQ); | 
|  | mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.reassoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | memcpy(mgmt->u.reassoc_req.current_ap, wk->assoc.prev_bssid, | 
|  | ETH_ALEN); | 
|  | } else { | 
|  | skb_put(skb, 4); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_ASSOC_REQ); | 
|  | mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.assoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | } | 
|  |  | 
|  | /* SSID */ | 
|  | pos = skb_put(skb, 2 + wk->assoc.ssid_len); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = wk->assoc.ssid_len; | 
|  | memcpy(pos, wk->assoc.ssid, wk->assoc.ssid_len); | 
|  |  | 
|  | /* add all rates which were marked to be used above */ | 
|  | supp_rates_len = rates_len; | 
|  | if (supp_rates_len > 8) | 
|  | supp_rates_len = 8; | 
|  |  | 
|  | pos = skb_put(skb, supp_rates_len + 2); | 
|  | *pos++ = WLAN_EID_SUPP_RATES; | 
|  | *pos++ = supp_rates_len; | 
|  |  | 
|  | count = 0; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | if (++count == 8) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rates_len > count) { | 
|  | pos = skb_put(skb, rates_len - count + 2); | 
|  | *pos++ = WLAN_EID_EXT_SUPP_RATES; | 
|  | *pos++ = rates_len - count; | 
|  |  | 
|  | for (i++; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { | 
|  | /* 1. power capabilities */ | 
|  | pos = skb_put(skb, 4); | 
|  | *pos++ = WLAN_EID_PWR_CAPABILITY; | 
|  | *pos++ = 2; | 
|  | *pos++ = 0; /* min tx power */ | 
|  | *pos++ = wk->chan->max_power; /* max tx power */ | 
|  |  | 
|  | /* 2. supported channels */ | 
|  | /* TODO: get this in reg domain format */ | 
|  | pos = skb_put(skb, 2 * sband->n_channels + 2); | 
|  | *pos++ = WLAN_EID_SUPPORTED_CHANNELS; | 
|  | *pos++ = 2 * sband->n_channels; | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | *pos++ = ieee80211_frequency_to_channel( | 
|  | sband->channels[i].center_freq); | 
|  | *pos++ = 1; /* one channel in the subband*/ | 
|  | } | 
|  | } | 
|  |  | 
|  | /* if present, add any custom IEs that go before HT */ | 
|  | if (wk->ie_len && wk->ie) { | 
|  | static const u8 before_ht[] = { | 
|  | WLAN_EID_SSID, | 
|  | WLAN_EID_SUPP_RATES, | 
|  | WLAN_EID_EXT_SUPP_RATES, | 
|  | WLAN_EID_PWR_CAPABILITY, | 
|  | WLAN_EID_SUPPORTED_CHANNELS, | 
|  | WLAN_EID_RSN, | 
|  | WLAN_EID_QOS_CAPA, | 
|  | WLAN_EID_RRM_ENABLED_CAPABILITIES, | 
|  | WLAN_EID_MOBILITY_DOMAIN, | 
|  | WLAN_EID_SUPPORTED_REGULATORY_CLASSES, | 
|  | }; | 
|  | noffset = ieee80211_ie_split(wk->ie, wk->ie_len, | 
|  | before_ht, ARRAY_SIZE(before_ht), | 
|  | offset); | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, wk->ie + offset, noffset - offset); | 
|  | offset = noffset; | 
|  | } | 
|  |  | 
|  | if (wk->assoc.use_11n && wk->assoc.wmm_used && | 
|  | local->hw.queues >= 4) | 
|  | ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie, | 
|  | sband, wk->chan, wk->assoc.smps); | 
|  |  | 
|  | /* if present, add any custom non-vendor IEs that go after HT */ | 
|  | if (wk->ie_len && wk->ie) { | 
|  | noffset = ieee80211_ie_split_vendor(wk->ie, wk->ie_len, | 
|  | offset); | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, wk->ie + offset, noffset - offset); | 
|  | offset = noffset; | 
|  | } | 
|  |  | 
|  | if (wk->assoc.wmm_used && local->hw.queues >= 4) { | 
|  | if (wk->assoc.uapsd_used) { | 
|  | qos_info = local->uapsd_queues; | 
|  | qos_info |= (local->uapsd_max_sp_len << | 
|  | IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); | 
|  | } else { | 
|  | qos_info = 0; | 
|  | } | 
|  |  | 
|  | pos = skb_put(skb, 9); | 
|  | *pos++ = WLAN_EID_VENDOR_SPECIFIC; | 
|  | *pos++ = 7; /* len */ | 
|  | *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ | 
|  | *pos++ = 0x50; | 
|  | *pos++ = 0xf2; | 
|  | *pos++ = 2; /* WME */ | 
|  | *pos++ = 0; /* WME info */ | 
|  | *pos++ = 1; /* WME ver */ | 
|  | *pos++ = qos_info; | 
|  | } | 
|  |  | 
|  | /* add any remaining custom (i.e. vendor specific here) IEs */ | 
|  | if (wk->ie_len && wk->ie) { | 
|  | noffset = wk->ie_len; | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, wk->ie + offset, noffset - offset); | 
|  | } | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_remove_auth_bss(struct ieee80211_local *local, | 
|  | struct ieee80211_work *wk) | 
|  | { | 
|  | struct cfg80211_bss *cbss; | 
|  | u16 capa_val = WLAN_CAPABILITY_ESS; | 
|  |  | 
|  | if (wk->probe_auth.privacy) | 
|  | capa_val |= WLAN_CAPABILITY_PRIVACY; | 
|  |  | 
|  | cbss = cfg80211_get_bss(local->hw.wiphy, wk->chan, wk->filter_ta, | 
|  | wk->probe_auth.ssid, wk->probe_auth.ssid_len, | 
|  | WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY, | 
|  | capa_val); | 
|  | if (!cbss) | 
|  | return; | 
|  |  | 
|  | cfg80211_unlink_bss(local->hw.wiphy, cbss); | 
|  | cfg80211_put_bss(cbss); | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_direct_probe(struct ieee80211_work *wk) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | wk->probe_auth.tries++; | 
|  | if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: direct probe to %pM timed out\n", | 
|  | sdata->name, wk->filter_ta); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss struct for that AP. | 
|  | */ | 
|  | ieee80211_remove_auth_bss(local, wk); | 
|  |  | 
|  | return WORK_ACT_TIMEOUT; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: direct probe to %pM (try %d/%i)\n", | 
|  | sdata->name, wk->filter_ta, wk->probe_auth.tries, | 
|  | IEEE80211_AUTH_MAX_TRIES); | 
|  |  | 
|  | /* | 
|  | * Direct probe is sent to broadcast address as some APs | 
|  | * will not answer to direct packet in unassociated state. | 
|  | */ | 
|  | ieee80211_send_probe_req(sdata, NULL, wk->probe_auth.ssid, | 
|  | wk->probe_auth.ssid_len, NULL, 0); | 
|  |  | 
|  | wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; | 
|  | run_again(local, wk->timeout); | 
|  |  | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_authenticate(struct ieee80211_work *wk) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | wk->probe_auth.tries++; | 
|  | if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: authentication with %pM" | 
|  | " timed out\n", sdata->name, wk->filter_ta); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss struct for that AP. | 
|  | */ | 
|  | ieee80211_remove_auth_bss(local, wk); | 
|  |  | 
|  | return WORK_ACT_TIMEOUT; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: authenticate with %pM (try %d)\n", | 
|  | sdata->name, wk->filter_ta, wk->probe_auth.tries); | 
|  |  | 
|  | ieee80211_send_auth(sdata, 1, wk->probe_auth.algorithm, wk->ie, | 
|  | wk->ie_len, wk->filter_ta, NULL, 0, 0); | 
|  | wk->probe_auth.transaction = 2; | 
|  |  | 
|  | wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; | 
|  | run_again(local, wk->timeout); | 
|  |  | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_associate(struct ieee80211_work *wk) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | wk->assoc.tries++; | 
|  | if (wk->assoc.tries > IEEE80211_ASSOC_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: association with %pM" | 
|  | " timed out\n", | 
|  | sdata->name, wk->filter_ta); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss struct for that AP. | 
|  | */ | 
|  | if (wk->assoc.bss) | 
|  | cfg80211_unlink_bss(local->hw.wiphy, wk->assoc.bss); | 
|  |  | 
|  | return WORK_ACT_TIMEOUT; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: associate with %pM (try %d)\n", | 
|  | sdata->name, wk->filter_ta, wk->assoc.tries); | 
|  | ieee80211_send_assoc(sdata, wk); | 
|  |  | 
|  | wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; | 
|  | run_again(local, wk->timeout); | 
|  |  | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk) | 
|  | { | 
|  | /* | 
|  | * First time we run, do nothing -- the generic code will | 
|  | * have switched to the right channel etc. | 
|  | */ | 
|  | if (!wk->started) { | 
|  | wk->timeout = jiffies + msecs_to_jiffies(wk->remain.duration); | 
|  |  | 
|  | cfg80211_ready_on_channel(wk->sdata->dev, (unsigned long) wk, | 
|  | wk->chan, wk->chan_type, | 
|  | wk->remain.duration, GFP_KERNEL); | 
|  |  | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | return WORK_ACT_TIMEOUT; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_offchannel_tx(struct ieee80211_work *wk) | 
|  | { | 
|  | if (!wk->started) { | 
|  | wk->timeout = jiffies + msecs_to_jiffies(wk->offchan_tx.wait); | 
|  |  | 
|  | /* | 
|  | * After this, offchan_tx.frame remains but now is no | 
|  | * longer a valid pointer -- we still need it as the | 
|  | * cookie for canceling this work/status matching. | 
|  | */ | 
|  | ieee80211_tx_skb(wk->sdata, wk->offchan_tx.frame); | 
|  |  | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | return WORK_ACT_TIMEOUT; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_assoc_beacon_wait(struct ieee80211_work *wk) | 
|  | { | 
|  | if (wk->started) | 
|  | return WORK_ACT_TIMEOUT; | 
|  |  | 
|  | /* | 
|  | * Wait up to one beacon interval ... | 
|  | * should this be more if we miss one? | 
|  | */ | 
|  | printk(KERN_DEBUG "%s: waiting for beacon from %pM\n", | 
|  | wk->sdata->name, wk->filter_ta); | 
|  | wk->timeout = TU_TO_EXP_TIME(wk->assoc.bss->beacon_interval); | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | static void ieee80211_auth_challenge(struct ieee80211_work *wk, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | u8 *pos; | 
|  | struct ieee802_11_elems elems; | 
|  |  | 
|  | pos = mgmt->u.auth.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  | if (!elems.challenge) | 
|  | return; | 
|  | ieee80211_send_auth(sdata, 3, wk->probe_auth.algorithm, | 
|  | elems.challenge - 2, elems.challenge_len + 2, | 
|  | wk->filter_ta, wk->probe_auth.key, | 
|  | wk->probe_auth.key_len, wk->probe_auth.key_idx); | 
|  | wk->probe_auth.transaction = 4; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_rx_mgmt_auth(struct ieee80211_work *wk, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | u16 auth_alg, auth_transaction, status_code; | 
|  |  | 
|  | if (wk->type != IEEE80211_WORK_AUTH) | 
|  | return WORK_ACT_MISMATCH; | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); | 
|  | auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); | 
|  | status_code = le16_to_cpu(mgmt->u.auth.status_code); | 
|  |  | 
|  | if (auth_alg != wk->probe_auth.algorithm || | 
|  | auth_transaction != wk->probe_auth.transaction) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) { | 
|  | printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n", | 
|  | wk->sdata->name, mgmt->sa, status_code); | 
|  | return WORK_ACT_DONE; | 
|  | } | 
|  |  | 
|  | switch (wk->probe_auth.algorithm) { | 
|  | case WLAN_AUTH_OPEN: | 
|  | case WLAN_AUTH_LEAP: | 
|  | case WLAN_AUTH_FT: | 
|  | break; | 
|  | case WLAN_AUTH_SHARED_KEY: | 
|  | if (wk->probe_auth.transaction != 4) { | 
|  | ieee80211_auth_challenge(wk, mgmt, len); | 
|  | /* need another frame */ | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: authenticated\n", wk->sdata->name); | 
|  | return WORK_ACT_DONE; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_rx_mgmt_assoc_resp(struct ieee80211_work *wk, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | bool reassoc) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u16 capab_info, status_code, aid; | 
|  | struct ieee802_11_elems elems; | 
|  | u8 *pos; | 
|  |  | 
|  | if (wk->type != IEEE80211_WORK_ASSOC) | 
|  | return WORK_ACT_MISMATCH; | 
|  |  | 
|  | /* | 
|  | * AssocResp and ReassocResp have identical structure, so process both | 
|  | * of them in this function. | 
|  | */ | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); | 
|  | status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); | 
|  | aid = le16_to_cpu(mgmt->u.assoc_resp.aid); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x " | 
|  | "status=%d aid=%d)\n", | 
|  | sdata->name, reassoc ? "Rea" : "A", mgmt->sa, | 
|  | capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); | 
|  |  | 
|  | pos = mgmt->u.assoc_resp.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  |  | 
|  | if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && | 
|  | elems.timeout_int && elems.timeout_int_len == 5 && | 
|  | elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { | 
|  | u32 tu, ms; | 
|  | tu = get_unaligned_le32(elems.timeout_int + 1); | 
|  | ms = tu * 1024 / 1000; | 
|  | printk(KERN_DEBUG "%s: %pM rejected association temporarily; " | 
|  | "comeback duration %u TU (%u ms)\n", | 
|  | sdata->name, mgmt->sa, tu, ms); | 
|  | wk->timeout = jiffies + msecs_to_jiffies(ms); | 
|  | if (ms > IEEE80211_ASSOC_TIMEOUT) | 
|  | run_again(local, wk->timeout); | 
|  | return WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) | 
|  | printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n", | 
|  | sdata->name, mgmt->sa, status_code); | 
|  | else | 
|  | printk(KERN_DEBUG "%s: associated\n", sdata->name); | 
|  |  | 
|  | return WORK_ACT_DONE; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_rx_mgmt_probe_resp(struct ieee80211_work *wk, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | size_t baselen; | 
|  |  | 
|  | ASSERT_WORK_MTX(local); | 
|  |  | 
|  | if (wk->type != IEEE80211_WORK_DIRECT_PROBE) | 
|  | return WORK_ACT_MISMATCH; | 
|  |  | 
|  | if (len < 24 + 12) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name); | 
|  | return WORK_ACT_DONE; | 
|  | } | 
|  |  | 
|  | static enum work_action __must_check | 
|  | ieee80211_rx_mgmt_beacon(struct ieee80211_work *wk, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = wk->sdata; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | ASSERT_WORK_MTX(local); | 
|  |  | 
|  | if (wk->type != IEEE80211_WORK_ASSOC_BEACON_WAIT) | 
|  | return WORK_ACT_MISMATCH; | 
|  |  | 
|  | if (len < 24 + 12) | 
|  | return WORK_ACT_NONE; | 
|  |  | 
|  | printk(KERN_DEBUG "%s: beacon received\n", sdata->name); | 
|  | return WORK_ACT_DONE; | 
|  | } | 
|  |  | 
|  | static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_rx_status *rx_status; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | struct ieee80211_work *wk; | 
|  | enum work_action rma = WORK_ACT_NONE; | 
|  | u16 fc; | 
|  |  | 
|  | rx_status = (struct ieee80211_rx_status *) skb->cb; | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | fc = le16_to_cpu(mgmt->frame_control); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  |  | 
|  | list_for_each_entry(wk, &local->work_list, list) { | 
|  | const u8 *bssid = NULL; | 
|  |  | 
|  | switch (wk->type) { | 
|  | case IEEE80211_WORK_DIRECT_PROBE: | 
|  | case IEEE80211_WORK_AUTH: | 
|  | case IEEE80211_WORK_ASSOC: | 
|  | case IEEE80211_WORK_ASSOC_BEACON_WAIT: | 
|  | bssid = wk->filter_ta; | 
|  | break; | 
|  | default: | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Before queuing, we already verified mgmt->sa, | 
|  | * so this is needed just for matching. | 
|  | */ | 
|  | if (compare_ether_addr(bssid, mgmt->bssid)) | 
|  | continue; | 
|  |  | 
|  | switch (fc & IEEE80211_FCTL_STYPE) { | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | rma = ieee80211_rx_mgmt_beacon(wk, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | rma = ieee80211_rx_mgmt_probe_resp(wk, mgmt, skb->len, | 
|  | rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | rma = ieee80211_rx_mgmt_auth(wk, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_ASSOC_RESP: | 
|  | rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, | 
|  | skb->len, false); | 
|  | break; | 
|  | case IEEE80211_STYPE_REASSOC_RESP: | 
|  | rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, | 
|  | skb->len, true); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | rma = WORK_ACT_NONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We've either received an unexpected frame, or we have | 
|  | * multiple work items and need to match the frame to the | 
|  | * right one. | 
|  | */ | 
|  | if (rma == WORK_ACT_MISMATCH) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * We've processed this frame for that work, so it can't | 
|  | * belong to another work struct. | 
|  | * NB: this is also required for correctness for 'rma'! | 
|  | */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (rma) { | 
|  | case WORK_ACT_MISMATCH: | 
|  | /* ignore this unmatched frame */ | 
|  | break; | 
|  | case WORK_ACT_NONE: | 
|  | break; | 
|  | case WORK_ACT_DONE: | 
|  | list_del_rcu(&wk->list); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "unexpected: %d", rma); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | if (rma != WORK_ACT_DONE) | 
|  | goto out; | 
|  |  | 
|  | switch (wk->done(wk, skb)) { | 
|  | case WORK_DONE_DESTROY: | 
|  | free_work(wk); | 
|  | break; | 
|  | case WORK_DONE_REQUEUE: | 
|  | synchronize_rcu(); | 
|  | wk->started = false; /* restart */ | 
|  | mutex_lock(&local->mtx); | 
|  | list_add_tail(&wk->list, &local->work_list); | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static bool ieee80211_work_ct_coexists(enum nl80211_channel_type wk_ct, | 
|  | enum nl80211_channel_type oper_ct) | 
|  | { | 
|  | switch (wk_ct) { | 
|  | case NL80211_CHAN_NO_HT: | 
|  | return true; | 
|  | case NL80211_CHAN_HT20: | 
|  | if (oper_ct != NL80211_CHAN_NO_HT) | 
|  | return true; | 
|  | return false; | 
|  | case NL80211_CHAN_HT40MINUS: | 
|  | case NL80211_CHAN_HT40PLUS: | 
|  | return (wk_ct == oper_ct); | 
|  | } | 
|  | WARN_ON(1); /* shouldn't get here */ | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static enum nl80211_channel_type | 
|  | ieee80211_calc_ct(enum nl80211_channel_type wk_ct, | 
|  | enum nl80211_channel_type oper_ct) | 
|  | { | 
|  | switch (wk_ct) { | 
|  | case NL80211_CHAN_NO_HT: | 
|  | return oper_ct; | 
|  | case NL80211_CHAN_HT20: | 
|  | if (oper_ct != NL80211_CHAN_NO_HT) | 
|  | return oper_ct; | 
|  | return wk_ct; | 
|  | case NL80211_CHAN_HT40MINUS: | 
|  | case NL80211_CHAN_HT40PLUS: | 
|  | return wk_ct; | 
|  | } | 
|  | WARN_ON(1); /* shouldn't get here */ | 
|  | return wk_ct; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_work_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_local *local = (void *) data; | 
|  |  | 
|  | if (local->quiescing) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &local->work_work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_work_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_local *local = | 
|  | container_of(work, struct ieee80211_local, work_work); | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_work *wk, *tmp; | 
|  | LIST_HEAD(free_work); | 
|  | enum work_action rma; | 
|  | bool remain_off_channel = false; | 
|  |  | 
|  | if (local->scanning) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * ieee80211_queue_work() should have picked up most cases, | 
|  | * here we'll pick the rest. | 
|  | */ | 
|  | if (WARN(local->suspended, "work scheduled while going to suspend\n")) | 
|  | return; | 
|  |  | 
|  | /* first process frames to avoid timing out while a frame is pending */ | 
|  | while ((skb = skb_dequeue(&local->work_skb_queue))) | 
|  | ieee80211_work_rx_queued_mgmt(local, skb); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  |  | 
|  | ieee80211_recalc_idle(local); | 
|  |  | 
|  | list_for_each_entry_safe(wk, tmp, &local->work_list, list) { | 
|  | bool started = wk->started; | 
|  |  | 
|  | /* mark work as started if it's on the current off-channel */ | 
|  | if (!started && local->tmp_channel && | 
|  | wk->chan == local->tmp_channel && | 
|  | wk->chan_type == local->tmp_channel_type) { | 
|  | started = true; | 
|  | wk->timeout = jiffies; | 
|  | } | 
|  |  | 
|  | if (!started && !local->tmp_channel) { | 
|  | bool on_oper_chan; | 
|  | bool tmp_chan_changed = false; | 
|  | bool on_oper_chan2; | 
|  | enum nl80211_channel_type wk_ct; | 
|  | on_oper_chan = ieee80211_cfg_on_oper_channel(local); | 
|  |  | 
|  | /* Work with existing channel type if possible. */ | 
|  | wk_ct = wk->chan_type; | 
|  | if (wk->chan == local->hw.conf.channel) | 
|  | wk_ct = ieee80211_calc_ct(wk->chan_type, | 
|  | local->hw.conf.channel_type); | 
|  |  | 
|  | if (local->tmp_channel) | 
|  | if ((local->tmp_channel != wk->chan) || | 
|  | (local->tmp_channel_type != wk_ct)) | 
|  | tmp_chan_changed = true; | 
|  |  | 
|  | local->tmp_channel = wk->chan; | 
|  | local->tmp_channel_type = wk_ct; | 
|  | /* | 
|  | * Leave the station vifs in awake mode if they | 
|  | * happen to be on the same channel as | 
|  | * the requested channel. | 
|  | */ | 
|  | on_oper_chan2 = ieee80211_cfg_on_oper_channel(local); | 
|  | if (on_oper_chan != on_oper_chan2) { | 
|  | if (on_oper_chan2) { | 
|  | /* going off oper channel, PS too */ | 
|  | ieee80211_offchannel_stop_vifs(local, | 
|  | true); | 
|  | ieee80211_hw_config(local, 0); | 
|  | } else { | 
|  | /* going on channel, but leave PS | 
|  | * off-channel. */ | 
|  | ieee80211_hw_config(local, 0); | 
|  | ieee80211_offchannel_return(local, | 
|  | true, | 
|  | false); | 
|  | } | 
|  | } else if (tmp_chan_changed) | 
|  | /* Still off-channel, but on some other | 
|  | * channel, so update hardware. | 
|  | * PS should already be off-channel. | 
|  | */ | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | started = true; | 
|  | wk->timeout = jiffies; | 
|  | } | 
|  |  | 
|  | /* don't try to work with items that aren't started */ | 
|  | if (!started) | 
|  | continue; | 
|  |  | 
|  | if (time_is_after_jiffies(wk->timeout)) { | 
|  | /* | 
|  | * This work item isn't supposed to be worked on | 
|  | * right now, but take care to adjust the timer | 
|  | * properly. | 
|  | */ | 
|  | run_again(local, wk->timeout); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | switch (wk->type) { | 
|  | default: | 
|  | WARN_ON(1); | 
|  | /* nothing */ | 
|  | rma = WORK_ACT_NONE; | 
|  | break; | 
|  | case IEEE80211_WORK_ABORT: | 
|  | rma = WORK_ACT_TIMEOUT; | 
|  | break; | 
|  | case IEEE80211_WORK_DIRECT_PROBE: | 
|  | rma = ieee80211_direct_probe(wk); | 
|  | break; | 
|  | case IEEE80211_WORK_AUTH: | 
|  | rma = ieee80211_authenticate(wk); | 
|  | break; | 
|  | case IEEE80211_WORK_ASSOC: | 
|  | rma = ieee80211_associate(wk); | 
|  | break; | 
|  | case IEEE80211_WORK_REMAIN_ON_CHANNEL: | 
|  | rma = ieee80211_remain_on_channel_timeout(wk); | 
|  | break; | 
|  | case IEEE80211_WORK_OFFCHANNEL_TX: | 
|  | rma = ieee80211_offchannel_tx(wk); | 
|  | break; | 
|  | case IEEE80211_WORK_ASSOC_BEACON_WAIT: | 
|  | rma = ieee80211_assoc_beacon_wait(wk); | 
|  | break; | 
|  | } | 
|  |  | 
|  | wk->started = started; | 
|  |  | 
|  | switch (rma) { | 
|  | case WORK_ACT_NONE: | 
|  | /* might have changed the timeout */ | 
|  | run_again(local, wk->timeout); | 
|  | break; | 
|  | case WORK_ACT_TIMEOUT: | 
|  | list_del_rcu(&wk->list); | 
|  | synchronize_rcu(); | 
|  | list_add(&wk->list, &free_work); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "unexpected: %d", rma); | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry(wk, &local->work_list, list) { | 
|  | if (!wk->started) | 
|  | continue; | 
|  | if (wk->chan != local->tmp_channel) | 
|  | continue; | 
|  | if (!ieee80211_work_ct_coexists(wk->chan_type, | 
|  | local->tmp_channel_type)) | 
|  | continue; | 
|  | remain_off_channel = true; | 
|  | } | 
|  |  | 
|  | if (!remain_off_channel && local->tmp_channel) { | 
|  | local->tmp_channel = NULL; | 
|  | /* If tmp_channel wasn't operating channel, then | 
|  | * we need to go back on-channel. | 
|  | * NOTE:  If we can ever be here while scannning, | 
|  | * or if the hw_config() channel config logic changes, | 
|  | * then we may need to do a more thorough check to see if | 
|  | * we still need to do a hardware config.  Currently, | 
|  | * we cannot be here while scanning, however. | 
|  | */ | 
|  | if (!ieee80211_cfg_on_oper_channel(local)) | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | /* At the least, we need to disable offchannel_ps, | 
|  | * so just go ahead and run the entire offchannel | 
|  | * return logic here.  We *could* skip enabling | 
|  | * beaconing if we were already on-oper-channel | 
|  | * as a future optimization. | 
|  | */ | 
|  | ieee80211_offchannel_return(local, true, true); | 
|  |  | 
|  | /* give connection some time to breathe */ | 
|  | run_again(local, jiffies + HZ/2); | 
|  | } | 
|  |  | 
|  | if (list_empty(&local->work_list) && local->scan_req && | 
|  | !local->scanning) | 
|  | ieee80211_queue_delayed_work(&local->hw, | 
|  | &local->scan_work, | 
|  | round_jiffies_relative(0)); | 
|  |  | 
|  | ieee80211_recalc_idle(local); | 
|  |  | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | list_for_each_entry_safe(wk, tmp, &free_work, list) { | 
|  | wk->done(wk, NULL); | 
|  | list_del(&wk->list); | 
|  | kfree(wk); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_add_work(struct ieee80211_work *wk) | 
|  | { | 
|  | struct ieee80211_local *local; | 
|  |  | 
|  | if (WARN_ON(!wk->chan)) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(!wk->sdata)) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(!wk->done)) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(!ieee80211_sdata_running(wk->sdata))) | 
|  | return; | 
|  |  | 
|  | wk->started = false; | 
|  |  | 
|  | local = wk->sdata->local; | 
|  | mutex_lock(&local->mtx); | 
|  | list_add_tail(&wk->list, &local->work_list); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &local->work_work); | 
|  | } | 
|  |  | 
|  | void ieee80211_work_init(struct ieee80211_local *local) | 
|  | { | 
|  | INIT_LIST_HEAD(&local->work_list); | 
|  | setup_timer(&local->work_timer, ieee80211_work_timer, | 
|  | (unsigned long)local); | 
|  | INIT_WORK(&local->work_work, ieee80211_work_work); | 
|  | skb_queue_head_init(&local->work_skb_queue); | 
|  | } | 
|  |  | 
|  | void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_work *wk; | 
|  | bool cleanup = false; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | list_for_each_entry(wk, &local->work_list, list) { | 
|  | if (wk->sdata != sdata) | 
|  | continue; | 
|  | cleanup = true; | 
|  | wk->type = IEEE80211_WORK_ABORT; | 
|  | wk->started = true; | 
|  | wk->timeout = jiffies; | 
|  | } | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | /* run cleanups etc. */ | 
|  | if (cleanup) | 
|  | ieee80211_work_work(&local->work_work); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | list_for_each_entry(wk, &local->work_list, list) { | 
|  | if (wk->sdata != sdata) | 
|  | continue; | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  |  | 
|  | ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | struct ieee80211_work *wk; | 
|  | u16 fc; | 
|  |  | 
|  | if (skb->len < 24) | 
|  | return RX_DROP_MONITOR; | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | fc = le16_to_cpu(mgmt->frame_control); | 
|  |  | 
|  | list_for_each_entry_rcu(wk, &local->work_list, list) { | 
|  | if (sdata != wk->sdata) | 
|  | continue; | 
|  | if (compare_ether_addr(wk->filter_ta, mgmt->sa)) | 
|  | continue; | 
|  | if (compare_ether_addr(wk->filter_ta, mgmt->bssid)) | 
|  | continue; | 
|  |  | 
|  | switch (fc & IEEE80211_FCTL_STYPE) { | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | case IEEE80211_STYPE_ASSOC_RESP: | 
|  | case IEEE80211_STYPE_REASSOC_RESP: | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | skb_queue_tail(&local->work_skb_queue, skb); | 
|  | ieee80211_queue_work(&local->hw, &local->work_work); | 
|  | return RX_QUEUED; | 
|  | } | 
|  | } | 
|  |  | 
|  | return RX_CONTINUE; | 
|  | } | 
|  |  | 
|  | static enum work_done_result ieee80211_remain_done(struct ieee80211_work *wk, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | /* | 
|  | * We are done serving the remain-on-channel command. | 
|  | */ | 
|  | cfg80211_remain_on_channel_expired(wk->sdata->dev, (unsigned long) wk, | 
|  | wk->chan, wk->chan_type, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | return WORK_DONE_DESTROY; | 
|  | } | 
|  |  | 
|  | int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_channel *chan, | 
|  | enum nl80211_channel_type channel_type, | 
|  | unsigned int duration, u64 *cookie) | 
|  | { | 
|  | struct ieee80211_work *wk; | 
|  |  | 
|  | wk = kzalloc(sizeof(*wk), GFP_KERNEL); | 
|  | if (!wk) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wk->type = IEEE80211_WORK_REMAIN_ON_CHANNEL; | 
|  | wk->chan = chan; | 
|  | wk->chan_type = channel_type; | 
|  | wk->sdata = sdata; | 
|  | wk->done = ieee80211_remain_done; | 
|  |  | 
|  | wk->remain.duration = duration; | 
|  |  | 
|  | *cookie = (unsigned long) wk; | 
|  |  | 
|  | ieee80211_add_work(wk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata, | 
|  | u64 cookie) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_work *wk, *tmp; | 
|  | bool found = false; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | list_for_each_entry_safe(wk, tmp, &local->work_list, list) { | 
|  | if ((unsigned long) wk == cookie) { | 
|  | wk->timeout = jiffies; | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | if (!found) | 
|  | return -ENOENT; | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &local->work_work); | 
|  |  | 
|  | return 0; | 
|  | } |