ARM: pm: convert samsung platforms to generic suspend/resume support
Tested-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index b2ef443..afe5a76 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -32,25 +32,13 @@
* code after resume.
*
* entry:
- * r0 = pointer to the save block
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
-
- stmia r0, { r4 - r13 } @ Save CP registers and SP
-
- @@ save our state to ram
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ call final suspend code
ldr r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
- .data
-
- /* the next bit is code, but it requires easy access to the
- * s3c_sleep_save_phys data before the MMU is switched on, so
- * we store the code that needs this variable in the .data where
- * the value can be written to (the .text segment is RO).
- */
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
@@ -110,35 +86,4 @@
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
-
- /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
- * are thoroughly cleaned just in case the bootloader didn't do it
- * for us. */
- mov r0, #0
- mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
- @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
- @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
-
- ldr r0, s3c_sleep_save_phys
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0 @ restore copro access controls
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mcr p15, 0, r0, c7, c5, 4
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
- nop
- mov pc, r2 /* jump back */
-
- .end
+ b cpu_resume