ARM: pm: convert samsung platforms to generic suspend/resume support
Tested-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index d4d222b..a3d6494 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r3 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
- mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
-
- stmia r0, { r3 - r13 }
-
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
ldr r0, =pm_cpu_sleep
ldr r0, [ r0 ]
mov pc, r0
resume_with_mmu:
- /*
- * After MMU is turned on, restore the previous MMU table.
- */
- ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
- add r4, r4, r9
- str r12, [r4]
-
ldmfd sp!, { r3 - r12, pc }
.ltorg
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -96,75 +70,4 @@
*/
ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r3 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
-
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
-
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0
- mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
-
- mov r0, #0 @ restore copro access
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
- mcr p15, 0, r0, c7, c5, 4
-
- mcr p15, 0, r12, c10, c2, 0 @ write PRRR
- mcr p15, 0, r3, c10, c2, 1 @ write NMRR
-
- /*
- * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
- * And there are no valid entries in the MMU table at this point.
- * So before turning on the MMU, the MMU entry for the DRAM address
- * range is added. After the MMU is turned on, the other entries
- * in the MMU table will be restored.
- */
-
- /* r6 = Translation Table BASE0 */
- mov r4, r6
- mov r4, r4, LSR #14
- mov r4, r4, LSL #14
-
- /* Load address for adding to MMU table list */
- ldr r11, =0xE010F000 @ INFORM0 reg.
- ldr r10, [r11, #0]
- mov r10, r10, LSR #18
- bic r10, r10, #0x3
- orr r4, r4, r10
-
- /* Calculate MMU table entry */
- mov r10, r10, LSL #18
- ldr r5, =0x40E
- orr r10, r10, r5
-
- /* Back up originally data */
- ldr r12, [r4]
-
- /* Add calculated MMU table entry into MMU table list */
- str r10, [r4]
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
-
- nop
- nop
- nop
- nop
- nop @ second-to-last before mmu
-
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume