[PATCH] sgiseeq: Configure PIO and DMA timing requests.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/sgiseeq.c | 28 ++++++++++++++--------------
include/asm-mips/sgi/hpc3.h | 40 ++++++++++++++++++++--------------------
2 files changed, 34 insertions(+), 34 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h
index ac3dfc7..fcec52b 100644
--- a/include/asm-mips/sgi/hpc3.h
+++ b/include/asm-mips/sgi/hpc3.h
@@ -128,26 +128,26 @@
volatile u32 rx_gfptr; /* current GIO fifo ptr */
volatile u32 rx_dfptr; /* current device fifo ptr */
u32 _unused1; /* padding */
- volatile u32 rx_reset; /* reset register */
-#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */
-#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */
-#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
- volatile u32 rx_dconfig; /* DMA configuration register */
-#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
-#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
-#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
-#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
-#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
-#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
- volatile u32 rx_pconfig; /* PIO configuration register */
-#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
-#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
-#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
u32 _unused2[0x1000/4 - 8]; /* padding */