|  | /* | 
|  | * Bus & driver management routines for devices within | 
|  | * a MacIO ASIC. Interface to new driver model mostly | 
|  | * stolen from the PCI version. | 
|  | * | 
|  | *  Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org) | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or | 
|  | *  modify it under the terms of the GNU General Public License | 
|  | *  as published by the Free Software Foundation; either version | 
|  | *  2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * TODO: | 
|  | * | 
|  | *  - Don't probe below media bay by default, but instead provide | 
|  | *    some hooks for media bay to dynamically add/remove it's own | 
|  | *    sub-devices. | 
|  | */ | 
|  |  | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/pci_ids.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/macio.h> | 
|  | #include <asm/pmac_feature.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/pci-bridge.h> | 
|  |  | 
|  | #undef DEBUG | 
|  |  | 
|  | #define MAX_NODE_NAME_SIZE (20 - 12) | 
|  |  | 
|  | static struct macio_chip      *macio_on_hold; | 
|  |  | 
|  | static int macio_bus_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | const struct of_device_id * matches = drv->of_match_table; | 
|  |  | 
|  | if (!matches) | 
|  | return 0; | 
|  |  | 
|  | return of_match_device(matches, dev) != NULL; | 
|  | } | 
|  |  | 
|  | struct macio_dev *macio_dev_get(struct macio_dev *dev) | 
|  | { | 
|  | struct device *tmp; | 
|  |  | 
|  | if (!dev) | 
|  | return NULL; | 
|  | tmp = get_device(&dev->ofdev.dev); | 
|  | if (tmp) | 
|  | return to_macio_device(tmp); | 
|  | else | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void macio_dev_put(struct macio_dev *dev) | 
|  | { | 
|  | if (dev) | 
|  | put_device(&dev->ofdev.dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int macio_device_probe(struct device *dev) | 
|  | { | 
|  | int error = -ENODEV; | 
|  | struct macio_driver *drv; | 
|  | struct macio_dev *macio_dev; | 
|  | const struct of_device_id *match; | 
|  |  | 
|  | drv = to_macio_driver(dev->driver); | 
|  | macio_dev = to_macio_device(dev); | 
|  |  | 
|  | if (!drv->probe) | 
|  | return error; | 
|  |  | 
|  | macio_dev_get(macio_dev); | 
|  |  | 
|  | match = of_match_device(drv->driver.of_match_table, dev); | 
|  | if (match) | 
|  | error = drv->probe(macio_dev, match); | 
|  | if (error) | 
|  | macio_dev_put(macio_dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int macio_device_remove(struct device *dev) | 
|  | { | 
|  | struct macio_dev * macio_dev = to_macio_device(dev); | 
|  | struct macio_driver * drv = to_macio_driver(dev->driver); | 
|  |  | 
|  | if (dev->driver && drv->remove) | 
|  | drv->remove(macio_dev); | 
|  | macio_dev_put(macio_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void macio_device_shutdown(struct device *dev) | 
|  | { | 
|  | struct macio_dev * macio_dev = to_macio_device(dev); | 
|  | struct macio_driver * drv = to_macio_driver(dev->driver); | 
|  |  | 
|  | if (dev->driver && drv->shutdown) | 
|  | drv->shutdown(macio_dev); | 
|  | } | 
|  |  | 
|  | static int macio_device_suspend(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct macio_dev * macio_dev = to_macio_device(dev); | 
|  | struct macio_driver * drv = to_macio_driver(dev->driver); | 
|  |  | 
|  | if (dev->driver && drv->suspend) | 
|  | return drv->suspend(macio_dev, state); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int macio_device_resume(struct device * dev) | 
|  | { | 
|  | struct macio_dev * macio_dev = to_macio_device(dev); | 
|  | struct macio_driver * drv = to_macio_driver(dev->driver); | 
|  |  | 
|  | if (dev->driver && drv->resume) | 
|  | return drv->resume(macio_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | extern struct device_attribute macio_dev_attrs[]; | 
|  |  | 
|  | struct bus_type macio_bus_type = { | 
|  | .name	= "macio", | 
|  | .match	= macio_bus_match, | 
|  | .uevent = of_device_uevent, | 
|  | .probe	= macio_device_probe, | 
|  | .remove	= macio_device_remove, | 
|  | .shutdown = macio_device_shutdown, | 
|  | .suspend	= macio_device_suspend, | 
|  | .resume	= macio_device_resume, | 
|  | .dev_attrs = macio_dev_attrs, | 
|  | }; | 
|  |  | 
|  | static int __init macio_bus_driver_init(void) | 
|  | { | 
|  | return bus_register(&macio_bus_type); | 
|  | } | 
|  |  | 
|  | postcore_initcall(macio_bus_driver_init); | 
|  |  | 
|  |  | 
|  | /** | 
|  | * macio_release_dev - free a macio device structure when all users of it are | 
|  | * finished. | 
|  | * @dev: device that's been disconnected | 
|  | * | 
|  | * Will be called only by the device core when all users of this macio device | 
|  | * are done. This currently means never as we don't hot remove any macio | 
|  | * device yet, though that will happen with mediabay based devices in a later | 
|  | * implementation. | 
|  | */ | 
|  | static void macio_release_dev(struct device *dev) | 
|  | { | 
|  | struct macio_dev *mdev; | 
|  |  | 
|  | mdev = to_macio_device(dev); | 
|  | kfree(mdev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * macio_resource_quirks - tweak or skip some resources for a device | 
|  | * @np: pointer to the device node | 
|  | * @res: resulting resource | 
|  | * @index: index of resource in node | 
|  | * | 
|  | * If this routine returns non-null, then the resource is completely | 
|  | * skipped. | 
|  | */ | 
|  | static int macio_resource_quirks(struct device_node *np, struct resource *res, | 
|  | int index) | 
|  | { | 
|  | /* Only quirks for memory resources for now */ | 
|  | if ((res->flags & IORESOURCE_MEM) == 0) | 
|  | return 0; | 
|  |  | 
|  | /* Grand Central has too large resource 0 on some machines */ | 
|  | if (index == 0 && !strcmp(np->name, "gc")) | 
|  | res->end = res->start + 0x1ffff; | 
|  |  | 
|  | /* Airport has bogus resource 2 */ | 
|  | if (index >= 2 && !strcmp(np->name, "radio")) | 
|  | return 1; | 
|  |  | 
|  | #ifndef CONFIG_PPC64 | 
|  | /* DBDMAs may have bogus sizes */ | 
|  | if ((res->start & 0x0001f000) == 0x00008000) | 
|  | res->end = res->start + 0xff; | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | /* ESCC parent eats child resources. We could have added a | 
|  | * level of hierarchy, but I don't really feel the need | 
|  | * for it | 
|  | */ | 
|  | if (!strcmp(np->name, "escc")) | 
|  | return 1; | 
|  |  | 
|  | /* ESCC has bogus resources >= 3 */ | 
|  | if (index >= 3 && !(strcmp(np->name, "ch-a") && | 
|  | strcmp(np->name, "ch-b"))) | 
|  | return 1; | 
|  |  | 
|  | /* Media bay has too many resources, keep only first one */ | 
|  | if (index > 0 && !strcmp(np->name, "media-bay")) | 
|  | return 1; | 
|  |  | 
|  | /* Some older IDE resources have bogus sizes */ | 
|  | if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") && | 
|  | strcmp(np->type, "ide") && strcmp(np->type, "ata"))) { | 
|  | if (index == 0 && (res->end - res->start) > 0xfff) | 
|  | res->end = res->start + 0xfff; | 
|  | if (index == 1 && (res->end - res->start) > 0xff) | 
|  | res->end = res->start + 0xff; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void macio_create_fixup_irq(struct macio_dev *dev, int index, | 
|  | unsigned int line) | 
|  | { | 
|  | unsigned int irq; | 
|  |  | 
|  | irq = irq_create_mapping(NULL, line); | 
|  | if (irq != NO_IRQ) { | 
|  | dev->interrupt[index].start = irq; | 
|  | dev->interrupt[index].flags = IORESOURCE_IRQ; | 
|  | dev->interrupt[index].name = dev_name(&dev->ofdev.dev); | 
|  | } | 
|  | if (dev->n_interrupts <= index) | 
|  | dev->n_interrupts = index + 1; | 
|  | } | 
|  |  | 
|  | static void macio_add_missing_resources(struct macio_dev *dev) | 
|  | { | 
|  | struct device_node *np = dev->ofdev.dev.of_node; | 
|  | unsigned int irq_base; | 
|  |  | 
|  | /* Gatwick has some missing interrupts on child nodes */ | 
|  | if (dev->bus->chip->type != macio_gatwick) | 
|  | return; | 
|  |  | 
|  | /* irq_base is always 64 on gatwick. I have no cleaner way to get | 
|  | * that value from here at this point | 
|  | */ | 
|  | irq_base = 64; | 
|  |  | 
|  | /* Fix SCC */ | 
|  | if (strcmp(np->name, "ch-a") == 0) { | 
|  | macio_create_fixup_irq(dev, 0, 15 + irq_base); | 
|  | macio_create_fixup_irq(dev, 1,  4 + irq_base); | 
|  | macio_create_fixup_irq(dev, 2,  5 + irq_base); | 
|  | printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n"); | 
|  | } | 
|  |  | 
|  | /* Fix media-bay */ | 
|  | if (strcmp(np->name, "media-bay") == 0) { | 
|  | macio_create_fixup_irq(dev, 0, 29 + irq_base); | 
|  | printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n"); | 
|  | } | 
|  |  | 
|  | /* Fix left media bay childs */ | 
|  | if (dev->media_bay != NULL && strcmp(np->name, "floppy") == 0) { | 
|  | macio_create_fixup_irq(dev, 0, 19 + irq_base); | 
|  | macio_create_fixup_irq(dev, 1,  1 + irq_base); | 
|  | printk(KERN_INFO "macio: fixed left floppy irqs\n"); | 
|  | } | 
|  | if (dev->media_bay != NULL && strcasecmp(np->name, "ata4") == 0) { | 
|  | macio_create_fixup_irq(dev, 0, 14 + irq_base); | 
|  | macio_create_fixup_irq(dev, 0,  3 + irq_base); | 
|  | printk(KERN_INFO "macio: fixed left ide irqs\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void macio_setup_interrupts(struct macio_dev *dev) | 
|  | { | 
|  | struct device_node *np = dev->ofdev.dev.of_node; | 
|  | unsigned int irq; | 
|  | int i = 0, j = 0; | 
|  |  | 
|  | for (;;) { | 
|  | struct resource *res; | 
|  |  | 
|  | if (j >= MACIO_DEV_COUNT_IRQS) | 
|  | break; | 
|  | res = &dev->interrupt[j]; | 
|  | irq = irq_of_parse_and_map(np, i++); | 
|  | if (irq == NO_IRQ) | 
|  | break; | 
|  | res->start = irq; | 
|  | res->flags = IORESOURCE_IRQ; | 
|  | res->name = dev_name(&dev->ofdev.dev); | 
|  | if (macio_resource_quirks(np, res, i - 1)) { | 
|  | memset(res, 0, sizeof(struct resource)); | 
|  | continue; | 
|  | } else | 
|  | j++; | 
|  | } | 
|  | dev->n_interrupts = j; | 
|  | } | 
|  |  | 
|  | static void macio_setup_resources(struct macio_dev *dev, | 
|  | struct resource *parent_res) | 
|  | { | 
|  | struct device_node *np = dev->ofdev.dev.of_node; | 
|  | struct resource r; | 
|  | int index; | 
|  |  | 
|  | for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) { | 
|  | struct resource *res; | 
|  | if (index >= MACIO_DEV_COUNT_RESOURCES) | 
|  | break; | 
|  | res = &dev->resource[index]; | 
|  | *res = r; | 
|  | res->name = dev_name(&dev->ofdev.dev); | 
|  |  | 
|  | if (macio_resource_quirks(np, res, index)) { | 
|  | memset(res, 0, sizeof(struct resource)); | 
|  | continue; | 
|  | } | 
|  | /* Currently, we consider failure as harmless, this may | 
|  | * change in the future, once I've found all the device | 
|  | * tree bugs in older machines & worked around them | 
|  | */ | 
|  | if (insert_resource(parent_res, res)) { | 
|  | printk(KERN_WARNING "Can't request resource " | 
|  | "%d for MacIO device %s\n", | 
|  | index, dev_name(&dev->ofdev.dev)); | 
|  | } | 
|  | } | 
|  | dev->n_resources = index; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * macio_add_one_device - Add one device from OF node to the device tree | 
|  | * @chip: pointer to the macio_chip holding the device | 
|  | * @np: pointer to the device node in the OF tree | 
|  | * @in_bay: set to 1 if device is part of a media-bay | 
|  | * | 
|  | * When media-bay is changed to hotswap drivers, this function will | 
|  | * be exposed to the bay driver some way... | 
|  | */ | 
|  | static struct macio_dev * macio_add_one_device(struct macio_chip *chip, | 
|  | struct device *parent, | 
|  | struct device_node *np, | 
|  | struct macio_dev *in_bay, | 
|  | struct resource *parent_res) | 
|  | { | 
|  | struct macio_dev *dev; | 
|  | const u32 *reg; | 
|  |  | 
|  | if (np == NULL) | 
|  | return NULL; | 
|  |  | 
|  | dev = kzalloc(sizeof(*dev), GFP_KERNEL); | 
|  | if (!dev) | 
|  | return NULL; | 
|  |  | 
|  | dev->bus = &chip->lbus; | 
|  | dev->media_bay = in_bay; | 
|  | dev->ofdev.dev.of_node = np; | 
|  | dev->ofdev.archdata.dma_mask = 0xffffffffUL; | 
|  | dev->ofdev.dev.dma_mask = &dev->ofdev.archdata.dma_mask; | 
|  | dev->ofdev.dev.parent = parent; | 
|  | dev->ofdev.dev.bus = &macio_bus_type; | 
|  | dev->ofdev.dev.release = macio_release_dev; | 
|  | dev->ofdev.dev.dma_parms = &dev->dma_parms; | 
|  |  | 
|  | /* Standard DMA paremeters */ | 
|  | dma_set_max_seg_size(&dev->ofdev.dev, 65536); | 
|  | dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff); | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | /* Set the DMA ops to the ones from the PCI device, this could be | 
|  | * fishy if we didn't know that on PowerMac it's always direct ops | 
|  | * or iommu ops that will work fine | 
|  | * | 
|  | * To get all the fields, copy all archdata | 
|  | */ | 
|  | dev->ofdev.dev.archdata = chip->lbus.pdev->dev.archdata; | 
|  | #endif /* CONFIG_PCI */ | 
|  |  | 
|  | #ifdef DEBUG | 
|  | printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", | 
|  | dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); | 
|  | #endif | 
|  |  | 
|  | /* MacIO itself has a different reg, we use it's PCI base */ | 
|  | if (np == chip->of_node) { | 
|  | dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s", | 
|  | chip->lbus.index, | 
|  | #ifdef CONFIG_PCI | 
|  | (unsigned int)pci_resource_start(chip->lbus.pdev, 0), | 
|  | #else | 
|  | 0, /* NuBus may want to do something better here */ | 
|  | #endif | 
|  | MAX_NODE_NAME_SIZE, np->name); | 
|  | } else { | 
|  | reg = of_get_property(np, "reg", NULL); | 
|  | dev_set_name(&dev->ofdev.dev, "%1d.%08x:%.*s", | 
|  | chip->lbus.index, | 
|  | reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name); | 
|  | } | 
|  |  | 
|  | /* Setup interrupts & resources */ | 
|  | macio_setup_interrupts(dev); | 
|  | macio_setup_resources(dev, parent_res); | 
|  | macio_add_missing_resources(dev); | 
|  |  | 
|  | /* Register with core */ | 
|  | if (of_device_register(&dev->ofdev) != 0) { | 
|  | printk(KERN_DEBUG"macio: device registration error for %s!\n", | 
|  | dev_name(&dev->ofdev.dev)); | 
|  | kfree(dev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | static int macio_skip_device(struct device_node *np) | 
|  | { | 
|  | if (strncmp(np->name, "battery", 7) == 0) | 
|  | return 1; | 
|  | if (strncmp(np->name, "escc-legacy", 11) == 0) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * macio_pci_add_devices - Adds sub-devices of mac-io to the device tree | 
|  | * @chip: pointer to the macio_chip holding the devices | 
|  | * | 
|  | * This function will do the job of extracting devices from the | 
|  | * Open Firmware device tree, build macio_dev structures and add | 
|  | * them to the Linux device tree. | 
|  | * | 
|  | * For now, childs of media-bay are added now as well. This will | 
|  | * change rsn though. | 
|  | */ | 
|  | static void macio_pci_add_devices(struct macio_chip *chip) | 
|  | { | 
|  | struct device_node *np, *pnode; | 
|  | struct macio_dev *rdev, *mdev, *mbdev = NULL, *sdev = NULL; | 
|  | struct device *parent = NULL; | 
|  | struct resource *root_res = &iomem_resource; | 
|  |  | 
|  | /* Add a node for the macio bus itself */ | 
|  | #ifdef CONFIG_PCI | 
|  | if (chip->lbus.pdev) { | 
|  | parent = &chip->lbus.pdev->dev; | 
|  | root_res = &chip->lbus.pdev->resource[0]; | 
|  | } | 
|  | #endif | 
|  | pnode = of_node_get(chip->of_node); | 
|  | if (pnode == NULL) | 
|  | return; | 
|  |  | 
|  | /* Add macio itself to hierarchy */ | 
|  | rdev = macio_add_one_device(chip, parent, pnode, NULL, root_res); | 
|  | if (rdev == NULL) | 
|  | return; | 
|  | root_res = &rdev->resource[0]; | 
|  |  | 
|  | /* First scan 1st level */ | 
|  | for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) { | 
|  | if (macio_skip_device(np)) | 
|  | continue; | 
|  | of_node_get(np); | 
|  | mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, | 
|  | root_res); | 
|  | if (mdev == NULL) | 
|  | of_node_put(np); | 
|  | else if (strncmp(np->name, "media-bay", 9) == 0) | 
|  | mbdev = mdev; | 
|  | else if (strncmp(np->name, "escc", 4) == 0) | 
|  | sdev = mdev; | 
|  | } | 
|  |  | 
|  | /* Add media bay devices if any */ | 
|  | if (mbdev) { | 
|  | pnode = mbdev->ofdev.dev.of_node; | 
|  | for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) { | 
|  | if (macio_skip_device(np)) | 
|  | continue; | 
|  | of_node_get(np); | 
|  | if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, | 
|  | mbdev,  root_res) == NULL) | 
|  | of_node_put(np); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Add serial ports if any */ | 
|  | if (sdev) { | 
|  | pnode = sdev->ofdev.dev.of_node; | 
|  | for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) { | 
|  | if (macio_skip_device(np)) | 
|  | continue; | 
|  | of_node_get(np); | 
|  | if (macio_add_one_device(chip, &sdev->ofdev.dev, np, | 
|  | NULL, root_res) == NULL) | 
|  | of_node_put(np); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * macio_register_driver - Registers a new MacIO device driver | 
|  | * @drv: pointer to the driver definition structure | 
|  | */ | 
|  | int macio_register_driver(struct macio_driver *drv) | 
|  | { | 
|  | /* initialize common driver fields */ | 
|  | drv->driver.bus = &macio_bus_type; | 
|  |  | 
|  | /* register with core */ | 
|  | return driver_register(&drv->driver); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * macio_unregister_driver - Unregisters a new MacIO device driver | 
|  | * @drv: pointer to the driver definition structure | 
|  | */ | 
|  | void macio_unregister_driver(struct macio_driver *drv) | 
|  | { | 
|  | driver_unregister(&drv->driver); | 
|  | } | 
|  |  | 
|  | /* Managed MacIO resources */ | 
|  | struct macio_devres { | 
|  | u32	res_mask; | 
|  | }; | 
|  |  | 
|  | static void maciom_release(struct device *gendev, void *res) | 
|  | { | 
|  | struct macio_dev *dev = to_macio_device(gendev); | 
|  | struct macio_devres *dr = res; | 
|  | int i, max; | 
|  |  | 
|  | max = min(dev->n_resources, 32); | 
|  | for (i = 0; i < max; i++) { | 
|  | if (dr->res_mask & (1 << i)) | 
|  | macio_release_resource(dev, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | int macio_enable_devres(struct macio_dev *dev) | 
|  | { | 
|  | struct macio_devres *dr; | 
|  |  | 
|  | dr = devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL); | 
|  | if (!dr) { | 
|  | dr = devres_alloc(maciom_release, sizeof(*dr), GFP_KERNEL); | 
|  | if (!dr) | 
|  | return -ENOMEM; | 
|  | } | 
|  | return devres_get(&dev->ofdev.dev, dr, NULL, NULL) != NULL; | 
|  | } | 
|  |  | 
|  | static struct macio_devres * find_macio_dr(struct macio_dev *dev) | 
|  | { | 
|  | return devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	macio_request_resource - Request an MMIO resource | 
|  | * 	@dev: pointer to the device holding the resource | 
|  | *	@resource_no: resource number to request | 
|  | *	@name: resource name | 
|  | * | 
|  | *	Mark  memory region number @resource_no associated with MacIO | 
|  | *	device @dev as being reserved by owner @name.  Do not access | 
|  | *	any address inside the memory regions unless this call returns | 
|  | *	successfully. | 
|  | * | 
|  | *	Returns 0 on success, or %EBUSY on error.  A warning | 
|  | *	message is also printed on failure. | 
|  | */ | 
|  | int macio_request_resource(struct macio_dev *dev, int resource_no, | 
|  | const char *name) | 
|  | { | 
|  | struct macio_devres *dr = find_macio_dr(dev); | 
|  |  | 
|  | if (macio_resource_len(dev, resource_no) == 0) | 
|  | return 0; | 
|  |  | 
|  | if (!request_mem_region(macio_resource_start(dev, resource_no), | 
|  | macio_resource_len(dev, resource_no), | 
|  | name)) | 
|  | goto err_out; | 
|  |  | 
|  | if (dr && resource_no < 32) | 
|  | dr->res_mask |= 1 << resource_no; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | printk (KERN_WARNING "MacIO: Unable to reserve resource #%d:%lx@%lx" | 
|  | " for device %s\n", | 
|  | resource_no, | 
|  | macio_resource_len(dev, resource_no), | 
|  | macio_resource_start(dev, resource_no), | 
|  | dev_name(&dev->ofdev.dev)); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * macio_release_resource - Release an MMIO resource | 
|  | * @dev: pointer to the device holding the resource | 
|  | * @resource_no: resource number to release | 
|  | */ | 
|  | void macio_release_resource(struct macio_dev *dev, int resource_no) | 
|  | { | 
|  | struct macio_devres *dr = find_macio_dr(dev); | 
|  |  | 
|  | if (macio_resource_len(dev, resource_no) == 0) | 
|  | return; | 
|  | release_mem_region(macio_resource_start(dev, resource_no), | 
|  | macio_resource_len(dev, resource_no)); | 
|  | if (dr && resource_no < 32) | 
|  | dr->res_mask &= ~(1 << resource_no); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	macio_request_resources - Reserve all memory resources | 
|  | *	@dev: MacIO device whose resources are to be reserved | 
|  | *	@name: Name to be associated with resource. | 
|  | * | 
|  | *	Mark all memory regions associated with MacIO device @dev as | 
|  | *	being reserved by owner @name.  Do not access any address inside | 
|  | *	the memory regions unless this call returns successfully. | 
|  | * | 
|  | *	Returns 0 on success, or %EBUSY on error.  A warning | 
|  | *	message is also printed on failure. | 
|  | */ | 
|  | int macio_request_resources(struct macio_dev *dev, const char *name) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < dev->n_resources; i++) | 
|  | if (macio_request_resource(dev, i, name)) | 
|  | goto err_out; | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | while(--i >= 0) | 
|  | macio_release_resource(dev, i); | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	macio_release_resources - Release reserved memory resources | 
|  | *	@dev: MacIO device whose resources were previously reserved | 
|  | */ | 
|  |  | 
|  | void macio_release_resources(struct macio_dev *dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < dev->n_resources; i++) | 
|  | macio_release_resource(dev, i); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  |  | 
|  | static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | 
|  | { | 
|  | struct device_node* np; | 
|  | struct macio_chip* chip; | 
|  |  | 
|  | if (ent->vendor != PCI_VENDOR_ID_APPLE) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Note regarding refcounting: We assume pci_device_to_OF_node() is | 
|  | * ported to new OF APIs and returns a node with refcount incremented. | 
|  | */ | 
|  | np = pci_device_to_OF_node(pdev); | 
|  | if (np == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* The above assumption is wrong !!! | 
|  | * fix that here for now until I fix the arch code | 
|  | */ | 
|  | of_node_get(np); | 
|  |  | 
|  | /* We also assume that pmac_feature will have done a get() on nodes | 
|  | * stored in the macio chips array | 
|  | */ | 
|  | chip = macio_find(np, macio_unknown); | 
|  | of_node_put(np); | 
|  | if (chip == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* XXX Need locking ??? */ | 
|  | if (chip->lbus.pdev == NULL) { | 
|  | chip->lbus.pdev = pdev; | 
|  | chip->lbus.chip = chip; | 
|  | pci_set_drvdata(pdev, &chip->lbus); | 
|  | pci_set_master(pdev); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "MacIO PCI driver attached to %s chipset\n", | 
|  | chip->name); | 
|  |  | 
|  | /* | 
|  | * HACK ALERT: The WallStreet PowerBook and some OHare based machines | 
|  | * have 2 macio ASICs. I must probe the "main" one first or IDE | 
|  | * ordering will be incorrect. So I put on "hold" the second one since | 
|  | * it seem to appear first on PCI | 
|  | */ | 
|  | if (chip->type == macio_gatwick || chip->type == macio_ohareII) | 
|  | if (macio_chips[0].lbus.pdev == NULL) { | 
|  | macio_on_hold = chip; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | macio_pci_add_devices(chip); | 
|  | if (macio_on_hold && macio_chips[0].lbus.pdev != NULL) { | 
|  | macio_pci_add_devices(macio_on_hold); | 
|  | macio_on_hold = NULL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __devexit macio_pci_remove(struct pci_dev* pdev) | 
|  | { | 
|  | panic("removing of macio-asic not supported !\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * MacIO is matched against any Apple ID, it's probe() function | 
|  | * will then decide wether it applies or not | 
|  | */ | 
|  | static const struct pci_device_id __devinitdata pci_ids [] = { { | 
|  | .vendor		= PCI_VENDOR_ID_APPLE, | 
|  | .device		= PCI_ANY_ID, | 
|  | .subvendor	= PCI_ANY_ID, | 
|  | .subdevice	= PCI_ANY_ID, | 
|  |  | 
|  | }, { /* end: all zeroes */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE (pci, pci_ids); | 
|  |  | 
|  | /* pci driver glue; this is a "new style" PCI driver module */ | 
|  | static struct pci_driver macio_pci_driver = { | 
|  | .name		= (char *) "macio", | 
|  | .id_table	= pci_ids, | 
|  |  | 
|  | .probe		= macio_pci_probe, | 
|  | .remove		= macio_pci_remove, | 
|  | }; | 
|  |  | 
|  | #endif /* CONFIG_PCI */ | 
|  |  | 
|  | static int __init macio_module_init (void) | 
|  | { | 
|  | #ifdef CONFIG_PCI | 
|  | int rc; | 
|  |  | 
|  | rc = pci_register_driver(&macio_pci_driver); | 
|  | if (rc) | 
|  | return rc; | 
|  | #endif /* CONFIG_PCI */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_init(macio_module_init); | 
|  |  | 
|  | EXPORT_SYMBOL(macio_register_driver); | 
|  | EXPORT_SYMBOL(macio_unregister_driver); | 
|  | EXPORT_SYMBOL(macio_dev_get); | 
|  | EXPORT_SYMBOL(macio_dev_put); | 
|  | EXPORT_SYMBOL(macio_request_resource); | 
|  | EXPORT_SYMBOL(macio_release_resource); | 
|  | EXPORT_SYMBOL(macio_request_resources); | 
|  | EXPORT_SYMBOL(macio_release_resources); | 
|  | EXPORT_SYMBOL(macio_enable_devres); | 
|  |  |