|  | /* | 
|  | * drivers/rtc/rtc-spear.c | 
|  | * | 
|  | * Copyright (C) 2010 ST Microelectronics | 
|  | * Rajeev Kumar<rajeev-dlh.kumar@st.com> | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public | 
|  | * License version 2. This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  |  | 
|  | /* RTC registers */ | 
|  | #define TIME_REG		0x00 | 
|  | #define DATE_REG		0x04 | 
|  | #define ALARM_TIME_REG		0x08 | 
|  | #define ALARM_DATE_REG		0x0C | 
|  | #define CTRL_REG		0x10 | 
|  | #define STATUS_REG		0x14 | 
|  |  | 
|  | /* TIME_REG & ALARM_TIME_REG */ | 
|  | #define SECONDS_UNITS		(0xf<<0)	/* seconds units position */ | 
|  | #define SECONDS_TENS		(0x7<<4)	/* seconds tens position */ | 
|  | #define MINUTES_UNITS		(0xf<<8)	/* minutes units position */ | 
|  | #define MINUTES_TENS		(0x7<<12)	/* minutes tens position */ | 
|  | #define HOURS_UNITS		(0xf<<16)	/* hours units position */ | 
|  | #define HOURS_TENS		(0x3<<20)	/* hours tens position */ | 
|  |  | 
|  | /* DATE_REG & ALARM_DATE_REG */ | 
|  | #define DAYS_UNITS		(0xf<<0)	/* days units position */ | 
|  | #define DAYS_TENS		(0x3<<4)	/* days tens position */ | 
|  | #define MONTHS_UNITS		(0xf<<8)	/* months units position */ | 
|  | #define MONTHS_TENS		(0x1<<12)	/* months tens position */ | 
|  | #define YEARS_UNITS		(0xf<<16)	/* years units position */ | 
|  | #define YEARS_TENS		(0xf<<20)	/* years tens position */ | 
|  | #define YEARS_HUNDREDS		(0xf<<24)	/* years hundereds position */ | 
|  | #define YEARS_MILLENIUMS	(0xf<<28)	/* years millenium position */ | 
|  |  | 
|  | /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/ | 
|  | #define SECOND_SHIFT		0x00		/* seconds units */ | 
|  | #define MINUTE_SHIFT		0x08		/* minutes units position */ | 
|  | #define HOUR_SHIFT		0x10		/* hours units position */ | 
|  | #define MDAY_SHIFT		0x00		/* Month day shift */ | 
|  | #define MONTH_SHIFT		0x08		/* Month shift */ | 
|  | #define YEAR_SHIFT		0x10		/* Year shift */ | 
|  |  | 
|  | #define SECOND_MASK		0x7F | 
|  | #define MIN_MASK		0x7F | 
|  | #define HOUR_MASK		0x3F | 
|  | #define DAY_MASK		0x3F | 
|  | #define MONTH_MASK		0x7F | 
|  | #define YEAR_MASK		0xFFFF | 
|  |  | 
|  | /* date reg equal to time reg, for debug only */ | 
|  | #define TIME_BYP		(1<<9) | 
|  | #define INT_ENABLE		(1<<31)		/* interrupt enable */ | 
|  |  | 
|  | /* STATUS_REG */ | 
|  | #define CLK_UNCONNECTED		(1<<0) | 
|  | #define PEND_WR_TIME		(1<<2) | 
|  | #define PEND_WR_DATE		(1<<3) | 
|  | #define LOST_WR_TIME		(1<<4) | 
|  | #define LOST_WR_DATE		(1<<5) | 
|  | #define RTC_INT_MASK		(1<<31) | 
|  | #define STATUS_BUSY		(PEND_WR_TIME | PEND_WR_DATE) | 
|  | #define STATUS_FAIL		(LOST_WR_TIME | LOST_WR_DATE) | 
|  |  | 
|  | struct spear_rtc_config { | 
|  | struct clk *clk; | 
|  | spinlock_t lock; | 
|  | void __iomem *ioaddr; | 
|  | }; | 
|  |  | 
|  | static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config) | 
|  | { | 
|  | unsigned int val; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&config->lock, flags); | 
|  | val = readl(config->ioaddr + STATUS_REG); | 
|  | val |= RTC_INT_MASK; | 
|  | writel(val, config->ioaddr + STATUS_REG); | 
|  | spin_unlock_irqrestore(&config->lock, flags); | 
|  | } | 
|  |  | 
|  | static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config) | 
|  | { | 
|  | unsigned int val; | 
|  |  | 
|  | val = readl(config->ioaddr + CTRL_REG); | 
|  | if (!(val & INT_ENABLE)) { | 
|  | spear_rtc_clear_interrupt(config); | 
|  | val |= INT_ENABLE; | 
|  | writel(val, config->ioaddr + CTRL_REG); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config) | 
|  | { | 
|  | unsigned int val; | 
|  |  | 
|  | val = readl(config->ioaddr + CTRL_REG); | 
|  | if (val & INT_ENABLE) { | 
|  | val &= ~INT_ENABLE; | 
|  | writel(val, config->ioaddr + CTRL_REG); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int is_write_complete(struct spear_rtc_config *config) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&config->lock, flags); | 
|  | if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL) | 
|  | ret = -EIO; | 
|  | spin_unlock_irqrestore(&config->lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void rtc_wait_not_busy(struct spear_rtc_config *config) | 
|  | { | 
|  | int status, count = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* Assuming BUSY may stay active for 80 msec) */ | 
|  | for (count = 0; count < 80; count++) { | 
|  | spin_lock_irqsave(&config->lock, flags); | 
|  | status = readl(config->ioaddr + STATUS_REG); | 
|  | spin_unlock_irqrestore(&config->lock, flags); | 
|  | if ((status & STATUS_BUSY) == 0) | 
|  | break; | 
|  | /* check status busy, after each msec */ | 
|  | msleep(1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t spear_rtc_irq(int irq, void *dev_id) | 
|  | { | 
|  | struct rtc_device *rtc = (struct rtc_device *)dev_id; | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | unsigned long flags, events = 0; | 
|  | unsigned int irq_data; | 
|  |  | 
|  | spin_lock_irqsave(&config->lock, flags); | 
|  | irq_data = readl(config->ioaddr + STATUS_REG); | 
|  | spin_unlock_irqrestore(&config->lock, flags); | 
|  |  | 
|  | if ((irq_data & RTC_INT_MASK)) { | 
|  | spear_rtc_clear_interrupt(config); | 
|  | events = RTC_IRQF | RTC_AF; | 
|  | rtc_update_irq(rtc, 1, events); | 
|  | return IRQ_HANDLED; | 
|  | } else | 
|  | return IRQ_NONE; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int tm2bcd(struct rtc_time *tm) | 
|  | { | 
|  | if (rtc_valid_tm(tm) != 0) | 
|  | return -EINVAL; | 
|  | tm->tm_sec = bin2bcd(tm->tm_sec); | 
|  | tm->tm_min = bin2bcd(tm->tm_min); | 
|  | tm->tm_hour = bin2bcd(tm->tm_hour); | 
|  | tm->tm_mday = bin2bcd(tm->tm_mday); | 
|  | tm->tm_mon = bin2bcd(tm->tm_mon + 1); | 
|  | tm->tm_year = bin2bcd(tm->tm_year); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bcd2tm(struct rtc_time *tm) | 
|  | { | 
|  | tm->tm_sec = bcd2bin(tm->tm_sec); | 
|  | tm->tm_min = bcd2bin(tm->tm_min); | 
|  | tm->tm_hour = bcd2bin(tm->tm_hour); | 
|  | tm->tm_mday = bcd2bin(tm->tm_mday); | 
|  | tm->tm_mon = bcd2bin(tm->tm_mon) - 1; | 
|  | /* epoch == 1900 */ | 
|  | tm->tm_year = bcd2bin(tm->tm_year); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * spear_rtc_read_time - set the time | 
|  | * @dev: rtc device in use | 
|  | * @tm: holds date and time | 
|  | * | 
|  | * This function read time and date. On success it will return 0 | 
|  | * otherwise -ve error is returned. | 
|  | */ | 
|  | static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | unsigned int time, date; | 
|  |  | 
|  | /* we don't report wday/yday/isdst ... */ | 
|  | rtc_wait_not_busy(config); | 
|  |  | 
|  | time = readl(config->ioaddr + TIME_REG); | 
|  | date = readl(config->ioaddr + DATE_REG); | 
|  | tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; | 
|  | tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; | 
|  | tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; | 
|  | tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; | 
|  | tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; | 
|  | tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; | 
|  |  | 
|  | bcd2tm(tm); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * spear_rtc_set_time - set the time | 
|  | * @dev: rtc device in use | 
|  | * @tm: holds date and time | 
|  | * | 
|  | * This function set time and date. On success it will return 0 | 
|  | * otherwise -ve error is returned. | 
|  | */ | 
|  | static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | unsigned int time, date, err = 0; | 
|  |  | 
|  | if (tm2bcd(tm) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | rtc_wait_not_busy(config); | 
|  | time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) | | 
|  | (tm->tm_hour << HOUR_SHIFT); | 
|  | date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) | | 
|  | (tm->tm_year << YEAR_SHIFT); | 
|  | writel(time, config->ioaddr + TIME_REG); | 
|  | writel(date, config->ioaddr + DATE_REG); | 
|  | err = is_write_complete(config); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * spear_rtc_read_alarm - read the alarm time | 
|  | * @dev: rtc device in use | 
|  | * @alm: holds alarm date and time | 
|  | * | 
|  | * This function read alarm time and date. On success it will return 0 | 
|  | * otherwise -ve error is returned. | 
|  | */ | 
|  | static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | unsigned int time, date; | 
|  |  | 
|  | rtc_wait_not_busy(config); | 
|  |  | 
|  | time = readl(config->ioaddr + ALARM_TIME_REG); | 
|  | date = readl(config->ioaddr + ALARM_DATE_REG); | 
|  | alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; | 
|  | alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; | 
|  | alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; | 
|  | alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; | 
|  | alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; | 
|  | alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; | 
|  |  | 
|  | bcd2tm(&alm->time); | 
|  | alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * spear_rtc_set_alarm - set the alarm time | 
|  | * @dev: rtc device in use | 
|  | * @alm: holds alarm date and time | 
|  | * | 
|  | * This function set alarm time and date. On success it will return 0 | 
|  | * otherwise -ve error is returned. | 
|  | */ | 
|  | static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | unsigned int time, date, err = 0; | 
|  |  | 
|  | if (tm2bcd(&alm->time) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | rtc_wait_not_busy(config); | 
|  |  | 
|  | time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min << | 
|  | MINUTE_SHIFT) |	(alm->time.tm_hour << HOUR_SHIFT); | 
|  | date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon << | 
|  | MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT); | 
|  |  | 
|  | writel(time, config->ioaddr + ALARM_TIME_REG); | 
|  | writel(date, config->ioaddr + ALARM_DATE_REG); | 
|  | err = is_write_complete(config); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (alm->enabled) | 
|  | spear_rtc_enable_interrupt(config); | 
|  | else | 
|  | spear_rtc_disable_interrupt(config); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | static struct rtc_class_ops spear_rtc_ops = { | 
|  | .read_time = spear_rtc_read_time, | 
|  | .set_time = spear_rtc_set_time, | 
|  | .read_alarm = spear_rtc_read_alarm, | 
|  | .set_alarm = spear_rtc_set_alarm, | 
|  | }; | 
|  |  | 
|  | static int __devinit spear_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct resource *res; | 
|  | struct rtc_device *rtc; | 
|  | struct spear_rtc_config *config; | 
|  | unsigned int status = 0; | 
|  | int irq; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "no resource defined\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | if (!request_mem_region(res->start, resource_size(res), pdev->name)) { | 
|  | dev_err(&pdev->dev, "rtc region already claimed\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | config = kzalloc(sizeof(*config), GFP_KERNEL); | 
|  | if (!config) { | 
|  | dev_err(&pdev->dev, "out of memory\n"); | 
|  | status = -ENOMEM; | 
|  | goto err_release_region; | 
|  | } | 
|  |  | 
|  | config->clk = clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(config->clk)) { | 
|  | status = PTR_ERR(config->clk); | 
|  | goto err_kfree; | 
|  | } | 
|  |  | 
|  | status = clk_enable(config->clk); | 
|  | if (status < 0) | 
|  | goto err_clk_put; | 
|  |  | 
|  | config->ioaddr = ioremap(res->start, resource_size(res)); | 
|  | if (!config->ioaddr) { | 
|  | dev_err(&pdev->dev, "ioremap fail\n"); | 
|  | status = -ENOMEM; | 
|  | goto err_disable_clock; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&config->lock); | 
|  |  | 
|  | rtc = rtc_device_register(pdev->name, &pdev->dev, &spear_rtc_ops, | 
|  | THIS_MODULE); | 
|  | if (IS_ERR(rtc)) { | 
|  | dev_err(&pdev->dev, "can't register RTC device, err %ld\n", | 
|  | PTR_ERR(rtc)); | 
|  | status = PTR_ERR(rtc); | 
|  | goto err_iounmap; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, rtc); | 
|  | dev_set_drvdata(&rtc->dev, config); | 
|  |  | 
|  | /* alarm irqs */ | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) { | 
|  | dev_err(&pdev->dev, "no update irq?\n"); | 
|  | status = irq; | 
|  | goto err_clear_platdata; | 
|  | } | 
|  |  | 
|  | status = request_irq(irq, spear_rtc_irq, 0, pdev->name, rtc); | 
|  | if (status) { | 
|  | dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \ | 
|  | claimed\n", irq); | 
|  | goto err_clear_platdata; | 
|  | } | 
|  |  | 
|  | if (!device_can_wakeup(&pdev->dev)) | 
|  | device_init_wakeup(&pdev->dev, 1); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_clear_platdata: | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | dev_set_drvdata(&rtc->dev, NULL); | 
|  | rtc_device_unregister(rtc); | 
|  | err_iounmap: | 
|  | iounmap(config->ioaddr); | 
|  | err_disable_clock: | 
|  | clk_disable(config->clk); | 
|  | err_clk_put: | 
|  | clk_put(config->clk); | 
|  | err_kfree: | 
|  | kfree(config); | 
|  | err_release_region: | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int __devexit spear_rtc_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | int irq; | 
|  | struct resource *res; | 
|  |  | 
|  | /* leave rtc running, but disable irqs */ | 
|  | spear_rtc_disable_interrupt(config); | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq) | 
|  | free_irq(irq, pdev); | 
|  | clk_disable(config->clk); | 
|  | clk_put(config->clk); | 
|  | iounmap(config->ioaddr); | 
|  | kfree(config); | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (res) | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | dev_set_drvdata(&rtc->dev, NULL); | 
|  | rtc_device_unregister(rtc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state) | 
|  | { | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | int irq; | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (device_may_wakeup(&pdev->dev)) | 
|  | enable_irq_wake(irq); | 
|  | else { | 
|  | spear_rtc_disable_interrupt(config); | 
|  | clk_disable(config->clk); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int spear_rtc_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  | int irq; | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) | 
|  | disable_irq_wake(irq); | 
|  | else { | 
|  | clk_enable(config->clk); | 
|  | spear_rtc_enable_interrupt(config); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else | 
|  | #define spear_rtc_suspend	NULL | 
|  | #define spear_rtc_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static void spear_rtc_shutdown(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc = platform_get_drvdata(pdev); | 
|  | struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev); | 
|  |  | 
|  | spear_rtc_disable_interrupt(config); | 
|  | clk_disable(config->clk); | 
|  | } | 
|  |  | 
|  | static struct platform_driver spear_rtc_driver = { | 
|  | .probe = spear_rtc_probe, | 
|  | .remove = __devexit_p(spear_rtc_remove), | 
|  | .suspend = spear_rtc_suspend, | 
|  | .resume = spear_rtc_resume, | 
|  | .shutdown = spear_rtc_shutdown, | 
|  | .driver = { | 
|  | .name = "rtc-spear", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(spear_rtc_driver); | 
|  |  | 
|  | MODULE_ALIAS("platform:rtc-spear"); | 
|  | MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>"); | 
|  | MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)"); | 
|  | MODULE_LICENSE("GPL"); |