| /* | 
 |  * Copyright (C) 2004 IBM Corporation | 
 |  * | 
 |  * Authors: | 
 |  * Leendert van Doorn <leendert@watson.ibm.com> | 
 |  * Dave Safford <safford@watson.ibm.com> | 
 |  * Reiner Sailer <sailer@watson.ibm.com> | 
 |  * Kylene Hall <kjhall@us.ibm.com> | 
 |  * | 
 |  * Maintained by: <tpmdd-devel@lists.sourceforge.net> | 
 |  * | 
 |  * Device driver for TCG/TCPA TPM (trusted platform module). | 
 |  * Specifications at www.trustedcomputinggroup.org	  | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation, version 2 of the | 
 |  * License. | 
 |  *  | 
 |  */ | 
 |  | 
 | #include <linux/platform_device.h> | 
 | #include <linux/slab.h> | 
 | #include "tpm.h" | 
 |  | 
 | /* National definitions */ | 
 | enum tpm_nsc_addr{ | 
 | 	TPM_NSC_IRQ = 0x07, | 
 | 	TPM_NSC_BASE0_HI = 0x60, | 
 | 	TPM_NSC_BASE0_LO = 0x61, | 
 | 	TPM_NSC_BASE1_HI = 0x62, | 
 | 	TPM_NSC_BASE1_LO = 0x63 | 
 | }; | 
 |  | 
 | enum tpm_nsc_index { | 
 | 	NSC_LDN_INDEX = 0x07, | 
 | 	NSC_SID_INDEX = 0x20, | 
 | 	NSC_LDC_INDEX = 0x30, | 
 | 	NSC_DIO_INDEX = 0x60, | 
 | 	NSC_CIO_INDEX = 0x62, | 
 | 	NSC_IRQ_INDEX = 0x70, | 
 | 	NSC_ITS_INDEX = 0x71 | 
 | }; | 
 |  | 
 | enum tpm_nsc_status_loc { | 
 | 	NSC_STATUS = 0x01, | 
 | 	NSC_COMMAND = 0x01, | 
 | 	NSC_DATA = 0x00 | 
 | }; | 
 |  | 
 | /* status bits */ | 
 | enum tpm_nsc_status { | 
 | 	NSC_STATUS_OBF = 0x01,	/* output buffer full */ | 
 | 	NSC_STATUS_IBF = 0x02,	/* input buffer full */ | 
 | 	NSC_STATUS_F0 = 0x04,	/* F0 */ | 
 | 	NSC_STATUS_A2 = 0x08,	/* A2 */ | 
 | 	NSC_STATUS_RDY = 0x10,	/* ready to receive command */ | 
 | 	NSC_STATUS_IBR = 0x20	/* ready to receive data */ | 
 | }; | 
 |  | 
 | /* command bits */ | 
 | enum tpm_nsc_cmd_mode { | 
 | 	NSC_COMMAND_NORMAL = 0x01,	/* normal mode */ | 
 | 	NSC_COMMAND_EOC = 0x03, | 
 | 	NSC_COMMAND_CANCEL = 0x22 | 
 | }; | 
 | /* | 
 |  * Wait for a certain status to appear | 
 |  */ | 
 | static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data) | 
 | { | 
 | 	unsigned long stop; | 
 |  | 
 | 	/* status immediately available check */ | 
 | 	*data = inb(chip->vendor.base + NSC_STATUS); | 
 | 	if ((*data & mask) == val) | 
 | 		return 0; | 
 |  | 
 | 	/* wait for status */ | 
 | 	stop = jiffies + 10 * HZ; | 
 | 	do { | 
 | 		msleep(TPM_TIMEOUT); | 
 | 		*data = inb(chip->vendor.base + 1); | 
 | 		if ((*data & mask) == val) | 
 | 			return 0; | 
 | 	} | 
 | 	while (time_before(jiffies, stop)); | 
 |  | 
 | 	return -EBUSY; | 
 | } | 
 |  | 
 | static int nsc_wait_for_ready(struct tpm_chip *chip) | 
 | { | 
 | 	int status; | 
 | 	unsigned long stop; | 
 |  | 
 | 	/* status immediately available check */ | 
 | 	status = inb(chip->vendor.base + NSC_STATUS); | 
 | 	if (status & NSC_STATUS_OBF) | 
 | 		status = inb(chip->vendor.base + NSC_DATA); | 
 | 	if (status & NSC_STATUS_RDY) | 
 | 		return 0; | 
 |  | 
 | 	/* wait for status */ | 
 | 	stop = jiffies + 100; | 
 | 	do { | 
 | 		msleep(TPM_TIMEOUT); | 
 | 		status = inb(chip->vendor.base + NSC_STATUS); | 
 | 		if (status & NSC_STATUS_OBF) | 
 | 			status = inb(chip->vendor.base + NSC_DATA); | 
 | 		if (status & NSC_STATUS_RDY) | 
 | 			return 0; | 
 | 	} | 
 | 	while (time_before(jiffies, stop)); | 
 |  | 
 | 	dev_info(chip->dev, "wait for ready failed\n"); | 
 | 	return -EBUSY; | 
 | } | 
 |  | 
 |  | 
 | static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) | 
 | { | 
 | 	u8 *buffer = buf; | 
 | 	u8 data, *p; | 
 | 	u32 size; | 
 | 	__be32 *native_size; | 
 |  | 
 | 	if (count < 6) | 
 | 		return -EIO; | 
 |  | 
 | 	if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) { | 
 | 		dev_err(chip->dev, "F0 timeout\n"); | 
 | 		return -EIO; | 
 | 	} | 
 | 	if ((data = | 
 | 	     inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) { | 
 | 		dev_err(chip->dev, "not in normal mode (0x%x)\n", | 
 | 			data); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	/* read the whole packet */ | 
 | 	for (p = buffer; p < &buffer[count]; p++) { | 
 | 		if (wait_for_stat | 
 | 		    (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"OBF timeout (while reading data)\n"); | 
 | 			return -EIO; | 
 | 		} | 
 | 		if (data & NSC_STATUS_F0) | 
 | 			break; | 
 | 		*p = inb(chip->vendor.base + NSC_DATA); | 
 | 	} | 
 |  | 
 | 	if ((data & NSC_STATUS_F0) == 0 && | 
 | 	(wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) { | 
 | 		dev_err(chip->dev, "F0 not set\n"); | 
 | 		return -EIO; | 
 | 	} | 
 | 	if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) { | 
 | 		dev_err(chip->dev, | 
 | 			"expected end of command(0x%x)\n", data); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	native_size = (__force __be32 *) (buf + 2); | 
 | 	size = be32_to_cpu(*native_size); | 
 |  | 
 | 	if (count < size) | 
 | 		return -EIO; | 
 |  | 
 | 	return size; | 
 | } | 
 |  | 
 | static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) | 
 | { | 
 | 	u8 data; | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * If we hit the chip with back to back commands it locks up | 
 | 	 * and never set IBF. Hitting it with this "hammer" seems to | 
 | 	 * fix it. Not sure why this is needed, we followed the flow | 
 | 	 * chart in the manual to the letter. | 
 | 	 */ | 
 | 	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); | 
 |  | 
 | 	if (nsc_wait_for_ready(chip) != 0) | 
 | 		return -EIO; | 
 |  | 
 | 	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | 
 | 		dev_err(chip->dev, "IBF timeout\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND); | 
 | 	if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) { | 
 | 		dev_err(chip->dev, "IBR timeout\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < count; i++) { | 
 | 		if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"IBF timeout (while writing data)\n"); | 
 | 			return -EIO; | 
 | 		} | 
 | 		outb(buf[i], chip->vendor.base + NSC_DATA); | 
 | 	} | 
 |  | 
 | 	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | 
 | 		dev_err(chip->dev, "IBF timeout\n"); | 
 | 		return -EIO; | 
 | 	} | 
 | 	outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static void tpm_nsc_cancel(struct tpm_chip *chip) | 
 | { | 
 | 	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); | 
 | } | 
 |  | 
 | static u8 tpm_nsc_status(struct tpm_chip *chip) | 
 | { | 
 | 	return inb(chip->vendor.base + NSC_STATUS); | 
 | } | 
 |  | 
 | static const struct file_operations nsc_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.llseek = no_llseek, | 
 | 	.open = tpm_open, | 
 | 	.read = tpm_read, | 
 | 	.write = tpm_write, | 
 | 	.release = tpm_release, | 
 | }; | 
 |  | 
 | static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); | 
 | static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); | 
 | static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL); | 
 | static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel); | 
 |  | 
 | static struct attribute * nsc_attrs[] = { | 
 | 	&dev_attr_pubek.attr, | 
 | 	&dev_attr_pcrs.attr, | 
 | 	&dev_attr_caps.attr, | 
 | 	&dev_attr_cancel.attr, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs }; | 
 |  | 
 | static const struct tpm_vendor_specific tpm_nsc = { | 
 | 	.recv = tpm_nsc_recv, | 
 | 	.send = tpm_nsc_send, | 
 | 	.cancel = tpm_nsc_cancel, | 
 | 	.status = tpm_nsc_status, | 
 | 	.req_complete_mask = NSC_STATUS_OBF, | 
 | 	.req_complete_val = NSC_STATUS_OBF, | 
 | 	.req_canceled = NSC_STATUS_RDY, | 
 | 	.attr_group = &nsc_attr_grp, | 
 | 	.miscdev = { .fops = &nsc_ops, }, | 
 | }; | 
 |  | 
 | static struct platform_device *pdev = NULL; | 
 |  | 
 | static void tpm_nsc_remove(struct device *dev) | 
 | { | 
 | 	struct tpm_chip *chip = dev_get_drvdata(dev); | 
 | 	if ( chip ) { | 
 | 		release_region(chip->vendor.base, 2); | 
 | 		tpm_remove_hardware(chip->dev); | 
 | 	} | 
 | } | 
 |  | 
 | static int tpm_nsc_suspend(struct platform_device *dev, pm_message_t msg) | 
 | { | 
 | 	return tpm_pm_suspend(&dev->dev, msg); | 
 | } | 
 |  | 
 | static int tpm_nsc_resume(struct platform_device *dev) | 
 | { | 
 | 	return tpm_pm_resume(&dev->dev); | 
 | } | 
 |  | 
 | static struct platform_driver nsc_drv = { | 
 | 	.suspend         = tpm_nsc_suspend, | 
 | 	.resume          = tpm_nsc_resume, | 
 | 	.driver          = { | 
 | 		.name    = "tpm_nsc", | 
 | 		.owner   = THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init init_nsc(void) | 
 | { | 
 | 	int rc = 0; | 
 | 	int lo, hi, err; | 
 | 	int nscAddrBase = TPM_ADDR; | 
 | 	struct tpm_chip *chip; | 
 | 	unsigned long base; | 
 |  | 
 | 	/* verify that it is a National part (SID) */ | 
 | 	if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) { | 
 | 		nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)| | 
 | 			(tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE); | 
 | 		if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	err = platform_driver_register(&nsc_drv); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI); | 
 | 	lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO); | 
 | 	base = (hi<<8) | lo; | 
 |  | 
 | 	/* enable the DPM module */ | 
 | 	tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01); | 
 |  | 
 | 	pdev = platform_device_alloc("tpm_nscl0", -1); | 
 | 	if (!pdev) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_unreg_drv; | 
 | 	} | 
 |  | 
 | 	pdev->num_resources = 0; | 
 | 	pdev->dev.driver = &nsc_drv.driver; | 
 | 	pdev->dev.release = tpm_nsc_remove; | 
 |  | 
 | 	if ((rc = platform_device_add(pdev)) < 0) | 
 | 		goto err_put_dev; | 
 |  | 
 | 	if (request_region(base, 2, "tpm_nsc0") == NULL ) { | 
 | 		rc = -EBUSY; | 
 | 		goto err_del_dev; | 
 | 	} | 
 |  | 
 | 	if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) { | 
 | 		rc = -ENODEV; | 
 | 		goto err_rel_reg; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&pdev->dev, "NSC TPM detected\n"); | 
 | 	dev_dbg(&pdev->dev, | 
 | 		"NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20), | 
 | 		tpm_read_index(nscAddrBase,0x27)); | 
 | 	dev_dbg(&pdev->dev, | 
 | 		"NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25), | 
 | 		tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28)); | 
 | 	dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n", | 
 | 		(tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61)); | 
 | 	dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n", | 
 | 		(tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63)); | 
 | 	dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0x70)); | 
 | 	dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0x71)); | 
 | 	dev_dbg(&pdev->dev, | 
 | 		"NSC DMA channel select0 0x%x, select1 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75)); | 
 | 	dev_dbg(&pdev->dev, | 
 | 		"NSC Config " | 
 | 		"0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", | 
 | 		tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1), | 
 | 		tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3), | 
 | 		tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5), | 
 | 		tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7), | 
 | 		tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9)); | 
 |  | 
 | 	dev_info(&pdev->dev, | 
 | 		 "NSC TPM revision %d\n", | 
 | 		 tpm_read_index(nscAddrBase, 0x27) & 0x1F); | 
 |  | 
 | 	chip->vendor.base = base; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_rel_reg: | 
 | 	release_region(base, 2); | 
 | err_del_dev: | 
 | 	platform_device_del(pdev); | 
 | err_put_dev: | 
 | 	platform_device_put(pdev); | 
 | err_unreg_drv: | 
 | 	platform_driver_unregister(&nsc_drv); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void __exit cleanup_nsc(void) | 
 | { | 
 | 	if (pdev) { | 
 | 		tpm_nsc_remove(&pdev->dev); | 
 | 		platform_device_unregister(pdev); | 
 | 	} | 
 |  | 
 | 	platform_driver_unregister(&nsc_drv); | 
 | } | 
 |  | 
 | module_init(init_nsc); | 
 | module_exit(cleanup_nsc); | 
 |  | 
 | MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); | 
 | MODULE_DESCRIPTION("TPM Driver"); | 
 | MODULE_VERSION("2.0"); | 
 | MODULE_LICENSE("GPL"); |