|  | /******************************************************************* | 
|  | * This file is part of the Emulex Linux Device Driver for         * | 
|  | * Fibre Channel Host Bus Adapters.                                * | 
|  | * Copyright (C) 2004-2012 Emulex.  All rights reserved.           * | 
|  | * EMULEX and SLI are trademarks of Emulex.                        * | 
|  | * www.emulex.com                                                  * | 
|  | * Portions Copyright (C) 2004-2005 Christoph Hellwig              * | 
|  | *                                                                 * | 
|  | * This program is free software; you can redistribute it and/or   * | 
|  | * modify it under the terms of version 2 of the GNU General       * | 
|  | * Public License as published by the Free Software Foundation.    * | 
|  | * This program is distributed in the hope that it will be useful. * | 
|  | * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          * | 
|  | * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  * | 
|  | * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      * | 
|  | * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | 
|  | * TO BE LEGALLY INVALID.  See the GNU General Public License for  * | 
|  | * more details, a copy of which can be found in the file COPYING  * | 
|  | * included with this package.                                     * | 
|  | *******************************************************************/ | 
|  |  | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_transport_fc.h> | 
|  |  | 
|  | #include "lpfc_hw4.h" | 
|  | #include "lpfc_hw.h" | 
|  | #include "lpfc_nl.h" | 
|  | #include "lpfc_disc.h" | 
|  | #include "lpfc_sli.h" | 
|  | #include "lpfc_sli4.h" | 
|  | #include "lpfc_scsi.h" | 
|  | #include "lpfc.h" | 
|  | #include "lpfc_logmsg.h" | 
|  | #include "lpfc_crtn.h" | 
|  | #include "lpfc_vport.h" | 
|  | #include "lpfc_debugfs.h" | 
|  |  | 
|  | /* AlpaArray for assignment of scsid for scan-down and bind_method */ | 
|  | static uint8_t lpfcAlpaArray[] = { | 
|  | 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6, | 
|  | 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA, | 
|  | 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, | 
|  | 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9, | 
|  | 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97, | 
|  | 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79, | 
|  | 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, | 
|  | 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56, | 
|  | 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, | 
|  | 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35, | 
|  | 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, | 
|  | 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17, | 
|  | 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01 | 
|  | }; | 
|  |  | 
|  | static void lpfc_disc_timeout_handler(struct lpfc_vport *); | 
|  | static void lpfc_disc_flush_list(struct lpfc_vport *vport); | 
|  | static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); | 
|  | static int lpfc_fcf_inuse(struct lpfc_hba *); | 
|  |  | 
|  | void | 
|  | lpfc_terminate_rport_io(struct fc_rport *rport) | 
|  | { | 
|  | struct lpfc_rport_data *rdata; | 
|  | struct lpfc_nodelist * ndlp; | 
|  | struct lpfc_hba *phba; | 
|  |  | 
|  | rdata = rport->dd_data; | 
|  | ndlp = rdata->pnode; | 
|  |  | 
|  | if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { | 
|  | if (rport->roles & FC_RPORT_ROLE_FCP_TARGET) | 
|  | printk(KERN_ERR "Cannot find remote node" | 
|  | " to terminate I/O Data x%x\n", | 
|  | rport->port_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | phba  = ndlp->phba; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, | 
|  | "rport terminate: sid:x%x did:x%x flg:x%x", | 
|  | ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); | 
|  |  | 
|  | if (ndlp->nlp_sid != NLP_NO_SID) { | 
|  | lpfc_sli_abort_iocb(ndlp->vport, | 
|  | &phba->sli.ring[phba->sli.fcp_ring], | 
|  | ndlp->nlp_sid, 0, LPFC_CTX_TGT); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function will be called when dev_loss_tmo fire. | 
|  | */ | 
|  | void | 
|  | lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) | 
|  | { | 
|  | struct lpfc_rport_data *rdata; | 
|  | struct lpfc_nodelist * ndlp; | 
|  | struct lpfc_vport *vport; | 
|  | struct lpfc_hba   *phba; | 
|  | struct lpfc_work_evt *evtp; | 
|  | int  put_node; | 
|  | int  put_rport; | 
|  |  | 
|  | rdata = rport->dd_data; | 
|  | ndlp = rdata->pnode; | 
|  | if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) | 
|  | return; | 
|  |  | 
|  | vport = ndlp->vport; | 
|  | phba  = vport->phba; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
|  | "rport devlosscb: sid:x%x did:x%x flg:x%x", | 
|  | ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); | 
|  |  | 
|  | /* Don't defer this if we are in the process of deleting the vport | 
|  | * or unloading the driver. The unload will cleanup the node | 
|  | * appropriately we just need to cleanup the ndlp rport info here. | 
|  | */ | 
|  | if (vport->load_flag & FC_UNLOADING) { | 
|  | put_node = rdata->pnode != NULL; | 
|  | put_rport = ndlp->rport != NULL; | 
|  | rdata->pnode = NULL; | 
|  | ndlp->rport = NULL; | 
|  | if (put_node) | 
|  | lpfc_nlp_put(ndlp); | 
|  | if (put_rport) | 
|  | put_device(&rport->dev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) | 
|  | return; | 
|  |  | 
|  | evtp = &ndlp->dev_loss_evt; | 
|  |  | 
|  | if (!list_empty(&evtp->evt_listp)) | 
|  | return; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | /* We need to hold the node by incrementing the reference | 
|  | * count until this queued work is done | 
|  | */ | 
|  | evtp->evt_arg1  = lpfc_nlp_get(ndlp); | 
|  | if (evtp->evt_arg1) { | 
|  | evtp->evt = LPFC_EVT_DEV_LOSS; | 
|  | list_add_tail(&evtp->evt_listp, &phba->work_list); | 
|  | lpfc_worker_wake_up(phba); | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler | 
|  | * @ndlp: Pointer to remote node object. | 
|  | * | 
|  | * This function is called from the worker thread when devloss timeout timer | 
|  | * expires. For SLI4 host, this routine shall return 1 when at lease one | 
|  | * remote node, including this @ndlp, is still in use of FCF; otherwise, this | 
|  | * routine shall return 0 when there is no remote node is still in use of FCF | 
|  | * when devloss timeout happened to this @ndlp. | 
|  | **/ | 
|  | static int | 
|  | lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_rport_data *rdata; | 
|  | struct fc_rport   *rport; | 
|  | struct lpfc_vport *vport; | 
|  | struct lpfc_hba   *phba; | 
|  | uint8_t *name; | 
|  | int  put_node; | 
|  | int  put_rport; | 
|  | int warn_on = 0; | 
|  | int fcf_inuse = 0; | 
|  |  | 
|  | rport = ndlp->rport; | 
|  |  | 
|  | if (!rport) | 
|  | return fcf_inuse; | 
|  |  | 
|  | rdata = rport->dd_data; | 
|  | name = (uint8_t *) &ndlp->nlp_portname; | 
|  | vport = ndlp->vport; | 
|  | phba  = vport->phba; | 
|  |  | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | fcf_inuse = lpfc_fcf_inuse(phba); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
|  | "rport devlosstmo:did:x%x type:x%x id:x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id); | 
|  |  | 
|  | /* Don't defer this if we are in the process of deleting the vport | 
|  | * or unloading the driver. The unload will cleanup the node | 
|  | * appropriately we just need to cleanup the ndlp rport info here. | 
|  | */ | 
|  | if (vport->load_flag & FC_UNLOADING) { | 
|  | if (ndlp->nlp_sid != NLP_NO_SID) { | 
|  | /* flush the target */ | 
|  | lpfc_sli_abort_iocb(vport, | 
|  | &phba->sli.ring[phba->sli.fcp_ring], | 
|  | ndlp->nlp_sid, 0, LPFC_CTX_TGT); | 
|  | } | 
|  | put_node = rdata->pnode != NULL; | 
|  | put_rport = ndlp->rport != NULL; | 
|  | rdata->pnode = NULL; | 
|  | ndlp->rport = NULL; | 
|  | if (put_node) | 
|  | lpfc_nlp_put(ndlp); | 
|  | if (put_rport) | 
|  | put_device(&rport->dev); | 
|  | return fcf_inuse; | 
|  | } | 
|  |  | 
|  | if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0284 Devloss timeout Ignored on " | 
|  | "WWPN %x:%x:%x:%x:%x:%x:%x:%x " | 
|  | "NPort x%x\n", | 
|  | *name, *(name+1), *(name+2), *(name+3), | 
|  | *(name+4), *(name+5), *(name+6), *(name+7), | 
|  | ndlp->nlp_DID); | 
|  | return fcf_inuse; | 
|  | } | 
|  |  | 
|  | if (ndlp->nlp_type & NLP_FABRIC) { | 
|  | /* We will clean up these Nodes in linkup */ | 
|  | put_node = rdata->pnode != NULL; | 
|  | put_rport = ndlp->rport != NULL; | 
|  | rdata->pnode = NULL; | 
|  | ndlp->rport = NULL; | 
|  | if (put_node) | 
|  | lpfc_nlp_put(ndlp); | 
|  | if (put_rport) | 
|  | put_device(&rport->dev); | 
|  | return fcf_inuse; | 
|  | } | 
|  |  | 
|  | if (ndlp->nlp_sid != NLP_NO_SID) { | 
|  | warn_on = 1; | 
|  | /* flush the target */ | 
|  | lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], | 
|  | ndlp->nlp_sid, 0, LPFC_CTX_TGT); | 
|  | } | 
|  |  | 
|  | if (warn_on) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0203 Devloss timeout on " | 
|  | "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " | 
|  | "NPort x%06x Data: x%x x%x x%x\n", | 
|  | *name, *(name+1), *(name+2), *(name+3), | 
|  | *(name+4), *(name+5), *(name+6), *(name+7), | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | ndlp->nlp_state, ndlp->nlp_rpi); | 
|  | } else { | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0204 Devloss timeout on " | 
|  | "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " | 
|  | "NPort x%06x Data: x%x x%x x%x\n", | 
|  | *name, *(name+1), *(name+2), *(name+3), | 
|  | *(name+4), *(name+5), *(name+6), *(name+7), | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | ndlp->nlp_state, ndlp->nlp_rpi); | 
|  | } | 
|  |  | 
|  | put_node = rdata->pnode != NULL; | 
|  | put_rport = ndlp->rport != NULL; | 
|  | rdata->pnode = NULL; | 
|  | ndlp->rport = NULL; | 
|  | if (put_node) | 
|  | lpfc_nlp_put(ndlp); | 
|  | if (put_rport) | 
|  | put_device(&rport->dev); | 
|  |  | 
|  | if (!(vport->load_flag & FC_UNLOADING) && | 
|  | !(ndlp->nlp_flag & NLP_DELAY_TMO) && | 
|  | !(ndlp->nlp_flag & NLP_NPR_2B_DISC) && | 
|  | (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && | 
|  | (ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) && | 
|  | (ndlp->nlp_state != NLP_STE_PRLI_ISSUE)) | 
|  | lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); | 
|  |  | 
|  | return fcf_inuse; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler | 
|  | * @phba: Pointer to hba context object. | 
|  | * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler. | 
|  | * @nlp_did: remote node identifer with devloss timeout. | 
|  | * | 
|  | * This function is called from the worker thread after invoking devloss | 
|  | * timeout handler and releasing the reference count for the ndlp with | 
|  | * which the devloss timeout was handled for SLI4 host. For the devloss | 
|  | * timeout of the last remote node which had been in use of FCF, when this | 
|  | * routine is invoked, it shall be guaranteed that none of the remote are | 
|  | * in-use of FCF. When devloss timeout to the last remote using the FCF, | 
|  | * if the FIP engine is neither in FCF table scan process nor roundrobin | 
|  | * failover process, the in-use FCF shall be unregistered. If the FIP | 
|  | * engine is in FCF discovery process, the devloss timeout state shall | 
|  | * be set for either the FCF table scan process or roundrobin failover | 
|  | * process to unregister the in-use FCF. | 
|  | **/ | 
|  | static void | 
|  | lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse, | 
|  | uint32_t nlp_did) | 
|  | { | 
|  | /* If devloss timeout happened to a remote node when FCF had no | 
|  | * longer been in-use, do nothing. | 
|  | */ | 
|  | if (!fcf_inuse) | 
|  | return; | 
|  |  | 
|  | if ((phba->hba_flag & HBA_FIP_SUPPORT) && !lpfc_fcf_inuse(phba)) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (phba->fcf.fcf_flag & FCF_DISCOVERY) { | 
|  | if (phba->hba_flag & HBA_DEVLOSS_TMO) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  | phba->hba_flag |= HBA_DEVLOSS_TMO; | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2847 Last remote node (x%x) using " | 
|  | "FCF devloss tmo\n", nlp_did); | 
|  | } | 
|  | if (phba->fcf.fcf_flag & FCF_REDISC_PROG) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2868 Devloss tmo to FCF rediscovery " | 
|  | "in progress\n"); | 
|  | return; | 
|  | } | 
|  | if (!(phba->hba_flag & (FCF_TS_INPROG | FCF_RR_INPROG))) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2869 Devloss tmo to idle FIP engine, " | 
|  | "unreg in-use FCF and rescan.\n"); | 
|  | /* Unregister in-use FCF and rescan */ | 
|  | lpfc_unregister_fcf_rescan(phba); | 
|  | return; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | if (phba->hba_flag & FCF_TS_INPROG) | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2870 FCF table scan in progress\n"); | 
|  | if (phba->hba_flag & FCF_RR_INPROG) | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2871 FLOGI roundrobin FCF failover " | 
|  | "in progress\n"); | 
|  | } | 
|  | lpfc_unregister_unused_fcf(phba); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_alloc_fast_evt - Allocates data structure for posting event | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function is called from the functions which need to post | 
|  | * events from interrupt context. This function allocates data | 
|  | * structure required for posting event. It also keeps track of | 
|  | * number of events pending and prevent event storm when there are | 
|  | * too many events. | 
|  | **/ | 
|  | struct lpfc_fast_path_event * | 
|  | lpfc_alloc_fast_evt(struct lpfc_hba *phba) { | 
|  | struct lpfc_fast_path_event *ret; | 
|  |  | 
|  | /* If there are lot of fast event do not exhaust memory due to this */ | 
|  | if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) | 
|  | return NULL; | 
|  |  | 
|  | ret = kzalloc(sizeof(struct lpfc_fast_path_event), | 
|  | GFP_ATOMIC); | 
|  | if (ret) { | 
|  | atomic_inc(&phba->fast_event_count); | 
|  | INIT_LIST_HEAD(&ret->work_evt.evt_listp); | 
|  | ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_free_fast_evt - Frees event data structure | 
|  | * @phba: Pointer to hba context object. | 
|  | * @evt:  Event object which need to be freed. | 
|  | * | 
|  | * This function frees the data structure required for posting | 
|  | * events. | 
|  | **/ | 
|  | void | 
|  | lpfc_free_fast_evt(struct lpfc_hba *phba, | 
|  | struct lpfc_fast_path_event *evt) { | 
|  |  | 
|  | atomic_dec(&phba->fast_event_count); | 
|  | kfree(evt); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_send_fastpath_evt - Posts events generated from fast path | 
|  | * @phba: Pointer to hba context object. | 
|  | * @evtp: Event data structure. | 
|  | * | 
|  | * This function is called from worker thread, when the interrupt | 
|  | * context need to post an event. This function posts the event | 
|  | * to fc transport netlink interface. | 
|  | **/ | 
|  | static void | 
|  | lpfc_send_fastpath_evt(struct lpfc_hba *phba, | 
|  | struct lpfc_work_evt *evtp) | 
|  | { | 
|  | unsigned long evt_category, evt_sub_category; | 
|  | struct lpfc_fast_path_event *fast_evt_data; | 
|  | char *evt_data; | 
|  | uint32_t evt_data_size; | 
|  | struct Scsi_Host *shost; | 
|  |  | 
|  | fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, | 
|  | work_evt); | 
|  |  | 
|  | evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; | 
|  | evt_sub_category = (unsigned long) fast_evt_data->un. | 
|  | fabric_evt.subcategory; | 
|  | shost = lpfc_shost_from_vport(fast_evt_data->vport); | 
|  | if (evt_category == FC_REG_FABRIC_EVENT) { | 
|  | if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { | 
|  | evt_data = (char *) &fast_evt_data->un.read_check_error; | 
|  | evt_data_size = sizeof(fast_evt_data->un. | 
|  | read_check_error); | 
|  | } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || | 
|  | (evt_sub_category == LPFC_EVENT_PORT_BUSY)) { | 
|  | evt_data = (char *) &fast_evt_data->un.fabric_evt; | 
|  | evt_data_size = sizeof(fast_evt_data->un.fabric_evt); | 
|  | } else { | 
|  | lpfc_free_fast_evt(phba, fast_evt_data); | 
|  | return; | 
|  | } | 
|  | } else if (evt_category == FC_REG_SCSI_EVENT) { | 
|  | switch (evt_sub_category) { | 
|  | case LPFC_EVENT_QFULL: | 
|  | case LPFC_EVENT_DEVBSY: | 
|  | evt_data = (char *) &fast_evt_data->un.scsi_evt; | 
|  | evt_data_size = sizeof(fast_evt_data->un.scsi_evt); | 
|  | break; | 
|  | case LPFC_EVENT_CHECK_COND: | 
|  | evt_data = (char *) &fast_evt_data->un.check_cond_evt; | 
|  | evt_data_size =  sizeof(fast_evt_data->un. | 
|  | check_cond_evt); | 
|  | break; | 
|  | case LPFC_EVENT_VARQUEDEPTH: | 
|  | evt_data = (char *) &fast_evt_data->un.queue_depth_evt; | 
|  | evt_data_size = sizeof(fast_evt_data->un. | 
|  | queue_depth_evt); | 
|  | break; | 
|  | default: | 
|  | lpfc_free_fast_evt(phba, fast_evt_data); | 
|  | return; | 
|  | } | 
|  | } else { | 
|  | lpfc_free_fast_evt(phba, fast_evt_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fc_host_post_vendor_event(shost, | 
|  | fc_get_event_number(), | 
|  | evt_data_size, | 
|  | evt_data, | 
|  | LPFC_NL_VENDOR_ID); | 
|  |  | 
|  | lpfc_free_fast_evt(phba, fast_evt_data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_work_list_done(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_work_evt  *evtp = NULL; | 
|  | struct lpfc_nodelist  *ndlp; | 
|  | int free_evt; | 
|  | int fcf_inuse; | 
|  | uint32_t nlp_did; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | while (!list_empty(&phba->work_list)) { | 
|  | list_remove_head((&phba->work_list), evtp, typeof(*evtp), | 
|  | evt_listp); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | free_evt = 1; | 
|  | switch (evtp->evt) { | 
|  | case LPFC_EVT_ELS_RETRY: | 
|  | ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); | 
|  | lpfc_els_retry_delay_handler(ndlp); | 
|  | free_evt = 0; /* evt is part of ndlp */ | 
|  | /* decrement the node reference count held | 
|  | * for this queued work | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | break; | 
|  | case LPFC_EVT_DEV_LOSS: | 
|  | ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); | 
|  | fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp); | 
|  | free_evt = 0; | 
|  | /* decrement the node reference count held for | 
|  | * this queued work | 
|  | */ | 
|  | nlp_did = ndlp->nlp_DID; | 
|  | lpfc_nlp_put(ndlp); | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | lpfc_sli4_post_dev_loss_tmo_handler(phba, | 
|  | fcf_inuse, | 
|  | nlp_did); | 
|  | break; | 
|  | case LPFC_EVT_ONLINE: | 
|  | if (phba->link_state < LPFC_LINK_DOWN) | 
|  | *(int *) (evtp->evt_arg1) = lpfc_online(phba); | 
|  | else | 
|  | *(int *) (evtp->evt_arg1) = 0; | 
|  | complete((struct completion *)(evtp->evt_arg2)); | 
|  | break; | 
|  | case LPFC_EVT_OFFLINE_PREP: | 
|  | if (phba->link_state >= LPFC_LINK_DOWN) | 
|  | lpfc_offline_prep(phba); | 
|  | *(int *)(evtp->evt_arg1) = 0; | 
|  | complete((struct completion *)(evtp->evt_arg2)); | 
|  | break; | 
|  | case LPFC_EVT_OFFLINE: | 
|  | lpfc_offline(phba); | 
|  | lpfc_sli_brdrestart(phba); | 
|  | *(int *)(evtp->evt_arg1) = | 
|  | lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY); | 
|  | lpfc_unblock_mgmt_io(phba); | 
|  | complete((struct completion *)(evtp->evt_arg2)); | 
|  | break; | 
|  | case LPFC_EVT_WARM_START: | 
|  | lpfc_offline(phba); | 
|  | lpfc_reset_barrier(phba); | 
|  | lpfc_sli_brdreset(phba); | 
|  | lpfc_hba_down_post(phba); | 
|  | *(int *)(evtp->evt_arg1) = | 
|  | lpfc_sli_brdready(phba, HS_MBRDY); | 
|  | lpfc_unblock_mgmt_io(phba); | 
|  | complete((struct completion *)(evtp->evt_arg2)); | 
|  | break; | 
|  | case LPFC_EVT_KILL: | 
|  | lpfc_offline(phba); | 
|  | *(int *)(evtp->evt_arg1) | 
|  | = (phba->pport->stopped) | 
|  | ? 0 : lpfc_sli_brdkill(phba); | 
|  | lpfc_unblock_mgmt_io(phba); | 
|  | complete((struct completion *)(evtp->evt_arg2)); | 
|  | break; | 
|  | case LPFC_EVT_FASTPATH_MGMT_EVT: | 
|  | lpfc_send_fastpath_evt(phba, evtp); | 
|  | free_evt = 0; | 
|  | break; | 
|  | case LPFC_EVT_RESET_HBA: | 
|  | if (!(phba->pport->load_flag & FC_UNLOADING)) | 
|  | lpfc_reset_hba(phba); | 
|  | break; | 
|  | } | 
|  | if (free_evt) | 
|  | kfree(evtp); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_work_done(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_sli_ring *pring; | 
|  | uint32_t ha_copy, status, control, work_port_events; | 
|  | struct lpfc_vport **vports; | 
|  | struct lpfc_vport *vport; | 
|  | int i; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | ha_copy = phba->work_ha; | 
|  | phba->work_ha = 0; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | /* First, try to post the next mailbox command to SLI4 device */ | 
|  | if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) | 
|  | lpfc_sli4_post_async_mbox(phba); | 
|  |  | 
|  | if (ha_copy & HA_ERATT) | 
|  | /* Handle the error attention event */ | 
|  | lpfc_handle_eratt(phba); | 
|  |  | 
|  | if (ha_copy & HA_MBATT) | 
|  | lpfc_sli_handle_mb_event(phba); | 
|  |  | 
|  | if (ha_copy & HA_LATT) | 
|  | lpfc_handle_latt(phba); | 
|  |  | 
|  | /* Process SLI4 events */ | 
|  | if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { | 
|  | if (phba->hba_flag & HBA_RRQ_ACTIVE) | 
|  | lpfc_handle_rrq_active(phba); | 
|  | if (phba->hba_flag & FCP_XRI_ABORT_EVENT) | 
|  | lpfc_sli4_fcp_xri_abort_event_proc(phba); | 
|  | if (phba->hba_flag & ELS_XRI_ABORT_EVENT) | 
|  | lpfc_sli4_els_xri_abort_event_proc(phba); | 
|  | if (phba->hba_flag & ASYNC_EVENT) | 
|  | lpfc_sli4_async_event_proc(phba); | 
|  | if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ); | 
|  | } | 
|  | if (phba->fcf.fcf_flag & FCF_REDISC_EVT) | 
|  | lpfc_sli4_fcf_redisc_event_proc(phba); | 
|  | } | 
|  |  | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (vports != NULL) | 
|  | for (i = 0; i <= phba->max_vports; i++) { | 
|  | /* | 
|  | * We could have no vports in array if unloading, so if | 
|  | * this happens then just use the pport | 
|  | */ | 
|  | if (vports[i] == NULL && i == 0) | 
|  | vport = phba->pport; | 
|  | else | 
|  | vport = vports[i]; | 
|  | if (vport == NULL) | 
|  | break; | 
|  | spin_lock_irq(&vport->work_port_lock); | 
|  | work_port_events = vport->work_port_events; | 
|  | vport->work_port_events &= ~work_port_events; | 
|  | spin_unlock_irq(&vport->work_port_lock); | 
|  | if (work_port_events & WORKER_DISC_TMO) | 
|  | lpfc_disc_timeout_handler(vport); | 
|  | if (work_port_events & WORKER_ELS_TMO) | 
|  | lpfc_els_timeout_handler(vport); | 
|  | if (work_port_events & WORKER_HB_TMO) | 
|  | lpfc_hb_timeout_handler(phba); | 
|  | if (work_port_events & WORKER_MBOX_TMO) | 
|  | lpfc_mbox_timeout_handler(phba); | 
|  | if (work_port_events & WORKER_FABRIC_BLOCK_TMO) | 
|  | lpfc_unblock_fabric_iocbs(phba); | 
|  | if (work_port_events & WORKER_FDMI_TMO) | 
|  | lpfc_fdmi_timeout_handler(vport); | 
|  | if (work_port_events & WORKER_RAMP_DOWN_QUEUE) | 
|  | lpfc_ramp_down_queue_handler(phba); | 
|  | if (work_port_events & WORKER_RAMP_UP_QUEUE) | 
|  | lpfc_ramp_up_queue_handler(phba); | 
|  | if (work_port_events & WORKER_DELAYED_DISC_TMO) | 
|  | lpfc_delayed_disc_timeout_handler(vport); | 
|  | } | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  |  | 
|  | pring = &phba->sli.ring[LPFC_ELS_RING]; | 
|  | status = (ha_copy & (HA_RXMASK  << (4*LPFC_ELS_RING))); | 
|  | status >>= (4*LPFC_ELS_RING); | 
|  | if ((status & HA_RXMASK) || | 
|  | (pring->flag & LPFC_DEFERRED_RING_EVENT) || | 
|  | (phba->hba_flag & HBA_SP_QUEUE_EVT)) { | 
|  | if (pring->flag & LPFC_STOP_IOCB_EVENT) { | 
|  | pring->flag |= LPFC_DEFERRED_RING_EVENT; | 
|  | /* Set the lpfc data pending flag */ | 
|  | set_bit(LPFC_DATA_READY, &phba->data_flags); | 
|  | } else { | 
|  | pring->flag &= ~LPFC_DEFERRED_RING_EVENT; | 
|  | lpfc_sli_handle_slow_ring_event(phba, pring, | 
|  | (status & | 
|  | HA_RXMASK)); | 
|  | } | 
|  | if ((phba->sli_rev == LPFC_SLI_REV4) && pring->txq_cnt) | 
|  | lpfc_drain_txq(phba); | 
|  | /* | 
|  | * Turn on Ring interrupts | 
|  | */ | 
|  | if (phba->sli_rev <= LPFC_SLI_REV3) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | control = readl(phba->HCregaddr); | 
|  | if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) { | 
|  | lpfc_debugfs_slow_ring_trc(phba, | 
|  | "WRK Enable ring: cntl:x%x hacopy:x%x", | 
|  | control, ha_copy, 0); | 
|  |  | 
|  | control |= (HC_R0INT_ENA << LPFC_ELS_RING); | 
|  | writel(control, phba->HCregaddr); | 
|  | readl(phba->HCregaddr); /* flush */ | 
|  | } else { | 
|  | lpfc_debugfs_slow_ring_trc(phba, | 
|  | "WRK Ring ok:     cntl:x%x hacopy:x%x", | 
|  | control, ha_copy, 0); | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  | } | 
|  | lpfc_work_list_done(phba); | 
|  | } | 
|  |  | 
|  | int | 
|  | lpfc_do_work(void *p) | 
|  | { | 
|  | struct lpfc_hba *phba = p; | 
|  | int rc; | 
|  |  | 
|  | set_user_nice(current, -20); | 
|  | phba->data_flags = 0; | 
|  |  | 
|  | while (!kthread_should_stop()) { | 
|  | /* wait and check worker queue activities */ | 
|  | rc = wait_event_interruptible(phba->work_waitq, | 
|  | (test_and_clear_bit(LPFC_DATA_READY, | 
|  | &phba->data_flags) | 
|  | || kthread_should_stop())); | 
|  | /* Signal wakeup shall terminate the worker thread */ | 
|  | if (rc) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_ELS, | 
|  | "0433 Wakeup on signal: rc=x%x\n", rc); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Attend pending lpfc data processing */ | 
|  | lpfc_work_done(phba); | 
|  | } | 
|  | phba->worker_thread = NULL; | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_ELS, | 
|  | "0432 Worker thread stopped.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is only called to handle FC worker events. Since this a rare | 
|  | * occurrence, we allocate a struct lpfc_work_evt structure here instead of | 
|  | * embedding it in the IOCB. | 
|  | */ | 
|  | int | 
|  | lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2, | 
|  | uint32_t evt) | 
|  | { | 
|  | struct lpfc_work_evt  *evtp; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will | 
|  | * be queued to worker thread for processing | 
|  | */ | 
|  | evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC); | 
|  | if (!evtp) | 
|  | return 0; | 
|  |  | 
|  | evtp->evt_arg1  = arg1; | 
|  | evtp->evt_arg2  = arg2; | 
|  | evtp->evt       = evt; | 
|  |  | 
|  | spin_lock_irqsave(&phba->hbalock, flags); | 
|  | list_add_tail(&evtp->evt_listp, &phba->work_list); | 
|  | spin_unlock_irqrestore(&phba->hbalock, flags); | 
|  |  | 
|  | lpfc_worker_wake_up(phba); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | struct lpfc_nodelist *ndlp, *next_ndlp; | 
|  | int  rc; | 
|  |  | 
|  | list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | 
|  | if (!NLP_CHK_NODE_ACT(ndlp)) | 
|  | continue; | 
|  | if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | 
|  | continue; | 
|  | if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) || | 
|  | ((vport->port_type == LPFC_NPIV_PORT) && | 
|  | (ndlp->nlp_DID == NameServer_DID))) | 
|  | lpfc_unreg_rpi(vport, ndlp); | 
|  |  | 
|  | /* Leave Fabric nodes alone on link down */ | 
|  | if ((phba->sli_rev < LPFC_SLI_REV4) && | 
|  | (!remove && ndlp->nlp_type & NLP_FABRIC)) | 
|  | continue; | 
|  | rc = lpfc_disc_state_machine(vport, ndlp, NULL, | 
|  | remove | 
|  | ? NLP_EVT_DEVICE_RM | 
|  | : NLP_EVT_DEVICE_RECOVERY); | 
|  | } | 
|  | if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) { | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | lpfc_sli4_unreg_all_rpis(vport); | 
|  | lpfc_mbx_unreg_vpi(vport); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_port_link_failure(struct lpfc_vport *vport) | 
|  | { | 
|  | lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); | 
|  |  | 
|  | /* Cleanup any outstanding received buffers */ | 
|  | lpfc_cleanup_rcv_buffers(vport); | 
|  |  | 
|  | /* Cleanup any outstanding RSCN activity */ | 
|  | lpfc_els_flush_rscn(vport); | 
|  |  | 
|  | /* Cleanup any outstanding ELS commands */ | 
|  | lpfc_els_flush_cmd(vport); | 
|  |  | 
|  | lpfc_cleanup_rpis(vport, 0); | 
|  |  | 
|  | /* Turn off discovery timer if its running */ | 
|  | lpfc_can_disctmo(vport); | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_linkdown_port(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
|  | "Link Down:       state:x%x rtry:x%x flg:x%x", | 
|  | vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
|  |  | 
|  | lpfc_port_link_failure(vport); | 
|  |  | 
|  | /* Stop delayed Nport discovery */ | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_DISC_DELAYED; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | del_timer_sync(&vport->delayed_disc_tmo); | 
|  | } | 
|  |  | 
|  | int | 
|  | lpfc_linkdown(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport *vport = phba->pport; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_vport **vports; | 
|  | LPFC_MBOXQ_t          *mb; | 
|  | int i; | 
|  |  | 
|  | if (phba->link_state == LPFC_LINK_DOWN) | 
|  | return 0; | 
|  |  | 
|  | /* Block all SCSI stack I/Os */ | 
|  | lpfc_scsi_dev_block(phba); | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | if (phba->link_state > LPFC_LINK_DOWN) { | 
|  | phba->link_state = LPFC_LINK_DOWN; | 
|  | spin_lock_irq(shost->host_lock); | 
|  | phba->pport->fc_flag &= ~FC_LBIT; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (vports != NULL) | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
|  | /* Issue a LINK DOWN event to all nodes */ | 
|  | lpfc_linkdown_port(vports[i]); | 
|  | } | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  | /* Clean up any firmware default rpi's */ | 
|  | mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (mb) { | 
|  | lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); | 
|  | mb->vport = vport; | 
|  | mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) | 
|  | == MBX_NOT_FINISHED) { | 
|  | mempool_free(mb, phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Setup myDID for link up if we are in pt2pt mode */ | 
|  | if (phba->pport->fc_flag & FC_PT2PT) { | 
|  | phba->pport->fc_myDID = 0; | 
|  | mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (mb) { | 
|  | lpfc_config_link(phba, mb); | 
|  | mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | mb->vport = vport; | 
|  | if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) | 
|  | == MBX_NOT_FINISHED) { | 
|  | mempool_free(mb, phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  | spin_lock_irq(shost->host_lock); | 
|  | phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_nodelist *ndlp; | 
|  |  | 
|  | list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
|  | if (!NLP_CHK_NODE_ACT(ndlp)) | 
|  | continue; | 
|  | if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | 
|  | continue; | 
|  | if (ndlp->nlp_type & NLP_FABRIC) { | 
|  | /* On Linkup its safe to clean up the ndlp | 
|  | * from Fabric connections. | 
|  | */ | 
|  | if (ndlp->nlp_DID != Fabric_DID) | 
|  | lpfc_unreg_rpi(vport, ndlp); | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
|  | } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { | 
|  | /* Fail outstanding IO now since device is | 
|  | * marked for PLOGI. | 
|  | */ | 
|  | lpfc_unreg_rpi(vport, ndlp); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_linkup_port(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  |  | 
|  | if ((vport->load_flag & FC_UNLOADING) != 0) | 
|  | return; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
|  | "Link Up:         top:x%x speed:x%x flg:x%x", | 
|  | phba->fc_topology, phba->fc_linkspeed, phba->link_flag); | 
|  |  | 
|  | /* If NPIV is not enabled, only bring the physical port up */ | 
|  | if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && | 
|  | (vport != phba->pport)) | 
|  | return; | 
|  |  | 
|  | fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKUP, 0); | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY | | 
|  | FC_RSCN_MODE | FC_NLP_MORE | FC_RSCN_DISCOVERY); | 
|  | vport->fc_flag |= FC_NDISC_ACTIVE; | 
|  | vport->fc_ns_retry = 0; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | if (vport->fc_flag & FC_LBIT) | 
|  | lpfc_linkup_cleanup_nodes(vport); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int | 
|  | lpfc_linkup(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport **vports; | 
|  | int i; | 
|  |  | 
|  | lpfc_cleanup_wt_rrqs(phba); | 
|  | phba->link_state = LPFC_LINK_UP; | 
|  |  | 
|  | /* Unblock fabric iocbs if they are blocked */ | 
|  | clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags); | 
|  | del_timer_sync(&phba->fabric_block_timer); | 
|  |  | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (vports != NULL) | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) | 
|  | lpfc_linkup_port(vports[i]); | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  | if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && | 
|  | (phba->sli_rev < LPFC_SLI_REV4)) | 
|  | lpfc_issue_clear_la(phba, phba->pport); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a CLEAR_LA mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | static void | 
|  | lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_sli   *psli = &phba->sli; | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | uint32_t control; | 
|  |  | 
|  | /* Since we don't do discovery right now, turn these off here */ | 
|  | psli->ring[psli->extra_ring].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | psli->ring[psli->fcp_ring].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | psli->ring[psli->next_ring].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  |  | 
|  | /* Check for error */ | 
|  | if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) { | 
|  | /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "0320 CLEAR_LA mbxStatus error x%x hba " | 
|  | "state x%x\n", | 
|  | mb->mbxStatus, vport->port_state); | 
|  | phba->link_state = LPFC_HBA_ERROR; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (vport->port_type == LPFC_PHYSICAL_PORT) | 
|  | phba->link_state = LPFC_HBA_READY; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | psli->sli_flag |= LPFC_PROCESS_LA; | 
|  | control = readl(phba->HCregaddr); | 
|  | control |= HC_LAINT_ENA; | 
|  | writel(control, phba->HCregaddr); | 
|  | readl(phba->HCregaddr); /* flush */ | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  |  | 
|  | out: | 
|  | /* Device Discovery completes */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0225 Device Discovery completes\n"); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_ABORT_DISCOVERY; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | lpfc_can_disctmo(vport); | 
|  |  | 
|  | /* turn on Link Attention interrupts */ | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | psli->sli_flag |= LPFC_PROCESS_LA; | 
|  | control = readl(phba->HCregaddr); | 
|  | control |= HC_LAINT_ENA; | 
|  | writel(control, phba->HCregaddr); | 
|  | readl(phba->HCregaddr); /* flush */ | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  |  | 
|  | if (pmb->u.mb.mbxStatus) | 
|  | goto out; | 
|  |  | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | /* don't perform discovery for SLI4 loopback diagnostic test */ | 
|  | if ((phba->sli_rev == LPFC_SLI_REV4) && | 
|  | !(phba->hba_flag & HBA_FCOE_MODE) && | 
|  | (phba->link_flag & LS_LOOPBACK_MODE)) | 
|  | return; | 
|  |  | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP && | 
|  | vport->fc_flag & FC_PUBLIC_LOOP && | 
|  | !(vport->fc_flag & FC_LBIT)) { | 
|  | /* Need to wait for FAN - use discovery timer | 
|  | * for timeout.  port_state is identically | 
|  | * LPFC_LOCAL_CFG_LINK while waiting for FAN | 
|  | */ | 
|  | lpfc_set_disctmo(vport); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Start discovery by sending a FLOGI. port_state is identically | 
|  | * LPFC_FLOGI while waiting for FLOGI cmpl | 
|  | */ | 
|  | if (vport->port_state != LPFC_FLOGI) | 
|  | lpfc_initial_flogi(vport); | 
|  | return; | 
|  |  | 
|  | out: | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "0306 CONFIG_LINK mbxStatus error x%x " | 
|  | "HBA state x%x\n", | 
|  | pmb->u.mb.mbxStatus, vport->port_state); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | lpfc_linkdown(phba); | 
|  |  | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0200 CONFIG_LINK bad hba state x%x\n", | 
|  | vport->port_state); | 
|  |  | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_clear_fcf_rr_bmask | 
|  | * @phba pointer to the struct lpfc_hba for this port. | 
|  | * This fucnction resets the round robin bit mask and clears the | 
|  | * fcf priority list. The list deletions are done while holding the | 
|  | * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared | 
|  | * from the lpfc_fcf_pri record. | 
|  | **/ | 
|  | void | 
|  | lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_fcf_pri *fcf_pri; | 
|  | struct lpfc_fcf_pri *next_fcf_pri; | 
|  | memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask)); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | list_for_each_entry_safe(fcf_pri, next_fcf_pri, | 
|  | &phba->fcf.fcf_pri_list, list) { | 
|  | list_del_init(&fcf_pri->list); | 
|  | fcf_pri->fcf_rec.flag = 0; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  | static void | 
|  | lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  |  | 
|  | if (mboxq->u.mb.mbxStatus) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "2017 REG_FCFI mbxStatus error x%x " | 
|  | "HBA state x%x\n", | 
|  | mboxq->u.mb.mbxStatus, vport->port_state); | 
|  | goto fail_out; | 
|  | } | 
|  |  | 
|  | /* Start FCoE discovery by sending a FLOGI. */ | 
|  | phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi); | 
|  | /* Set the FCFI registered flag */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag |= FCF_REGISTERED; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | /* If there is a pending FCoE event, restart FCF table scan. */ | 
|  | if ((!(phba->hba_flag & FCF_RR_INPROG)) && | 
|  | lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF)) | 
|  | goto fail_out; | 
|  |  | 
|  | /* Mark successful completion of FCF table scan */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); | 
|  | phba->hba_flag &= ~FCF_TS_INPROG; | 
|  | if (vport->port_state != LPFC_FLOGI) { | 
|  | phba->hba_flag |= FCF_RR_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_issue_init_vfi(vport); | 
|  | goto out; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto out; | 
|  |  | 
|  | fail_out: | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~FCF_RR_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | out: | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_fab_name_match - Check if the fcf fabric name match. | 
|  | * @fab_name: pointer to fabric name. | 
|  | * @new_fcf_record: pointer to fcf record. | 
|  | * | 
|  | * This routine compare the fcf record's fabric name with provided | 
|  | * fabric name. If the fabric name are identical this function | 
|  | * returns 1 else return 0. | 
|  | **/ | 
|  | static uint32_t | 
|  | lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record) | 
|  | { | 
|  | if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) | 
|  | return 0; | 
|  | if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sw_name_match - Check if the fcf switch name match. | 
|  | * @fab_name: pointer to fabric name. | 
|  | * @new_fcf_record: pointer to fcf record. | 
|  | * | 
|  | * This routine compare the fcf record's switch name with provided | 
|  | * switch name. If the switch name are identical this function | 
|  | * returns 1 else return 0. | 
|  | **/ | 
|  | static uint32_t | 
|  | lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record) | 
|  | { | 
|  | if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) | 
|  | return 0; | 
|  | if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_mac_addr_match - Check if the fcf mac address match. | 
|  | * @mac_addr: pointer to mac address. | 
|  | * @new_fcf_record: pointer to fcf record. | 
|  | * | 
|  | * This routine compare the fcf record's mac address with HBA's | 
|  | * FCF mac address. If the mac addresses are identical this function | 
|  | * returns 1 else return 0. | 
|  | **/ | 
|  | static uint32_t | 
|  | lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record) | 
|  | { | 
|  | if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) | 
|  | return 0; | 
|  | if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) | 
|  | return 0; | 
|  | if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) | 
|  | return 0; | 
|  | if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) | 
|  | return 0; | 
|  | if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) | 
|  | return 0; | 
|  | if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id) | 
|  | { | 
|  | return (curr_vlan_id == new_vlan_id); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_update_fcf_record - Update driver fcf record | 
|  | * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_index: Index for the lpfc_fcf_record. | 
|  | * @new_fcf_record: pointer to hba fcf record. | 
|  | * | 
|  | * This routine updates the driver FCF priority record from the new HBA FCF | 
|  | * record. This routine is called with the host lock held. | 
|  | **/ | 
|  | static void | 
|  | __lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index, | 
|  | struct fcf_record *new_fcf_record | 
|  | ) | 
|  | { | 
|  | struct lpfc_fcf_pri *fcf_pri; | 
|  |  | 
|  | fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
|  | fcf_pri->fcf_rec.fcf_index = fcf_index; | 
|  | /* FCF record priority */ | 
|  | fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba. | 
|  | * @fcf: pointer to driver fcf record. | 
|  | * @new_fcf_record: pointer to fcf record. | 
|  | * | 
|  | * This routine copies the FCF information from the FCF | 
|  | * record to lpfc_hba data structure. | 
|  | **/ | 
|  | static void | 
|  | lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec, | 
|  | struct fcf_record *new_fcf_record) | 
|  | { | 
|  | /* Fabric name */ | 
|  | fcf_rec->fabric_name[0] = | 
|  | bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record); | 
|  | fcf_rec->fabric_name[1] = | 
|  | bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record); | 
|  | fcf_rec->fabric_name[2] = | 
|  | bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record); | 
|  | fcf_rec->fabric_name[3] = | 
|  | bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record); | 
|  | fcf_rec->fabric_name[4] = | 
|  | bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record); | 
|  | fcf_rec->fabric_name[5] = | 
|  | bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record); | 
|  | fcf_rec->fabric_name[6] = | 
|  | bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record); | 
|  | fcf_rec->fabric_name[7] = | 
|  | bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record); | 
|  | /* Mac address */ | 
|  | fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record); | 
|  | fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record); | 
|  | fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record); | 
|  | fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record); | 
|  | fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record); | 
|  | fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record); | 
|  | /* FCF record index */ | 
|  | fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
|  | /* FCF record priority */ | 
|  | fcf_rec->priority = new_fcf_record->fip_priority; | 
|  | /* Switch name */ | 
|  | fcf_rec->switch_name[0] = | 
|  | bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record); | 
|  | fcf_rec->switch_name[1] = | 
|  | bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record); | 
|  | fcf_rec->switch_name[2] = | 
|  | bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record); | 
|  | fcf_rec->switch_name[3] = | 
|  | bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record); | 
|  | fcf_rec->switch_name[4] = | 
|  | bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record); | 
|  | fcf_rec->switch_name[5] = | 
|  | bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record); | 
|  | fcf_rec->switch_name[6] = | 
|  | bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record); | 
|  | fcf_rec->switch_name[7] = | 
|  | bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_update_fcf_record - Update driver fcf record | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_rec: pointer to driver fcf record. | 
|  | * @new_fcf_record: pointer to hba fcf record. | 
|  | * @addr_mode: address mode to be set to the driver fcf record. | 
|  | * @vlan_id: vlan tag to be set to the driver fcf record. | 
|  | * @flag: flag bits to be set to the driver fcf record. | 
|  | * | 
|  | * This routine updates the driver FCF record from the new HBA FCF record | 
|  | * together with the address mode, vlan_id, and other informations. This | 
|  | * routine is called with the host lock held. | 
|  | **/ | 
|  | static void | 
|  | __lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec, | 
|  | struct fcf_record *new_fcf_record, uint32_t addr_mode, | 
|  | uint16_t vlan_id, uint32_t flag) | 
|  | { | 
|  | /* Copy the fields from the HBA's FCF record */ | 
|  | lpfc_copy_fcf_record(fcf_rec, new_fcf_record); | 
|  | /* Update other fields of driver FCF record */ | 
|  | fcf_rec->addr_mode = addr_mode; | 
|  | fcf_rec->vlan_id = vlan_id; | 
|  | fcf_rec->flag |= (flag | RECORD_VALID); | 
|  | __lpfc_update_fcf_record_pri(phba, | 
|  | bf_get(lpfc_fcf_record_fcf_index, new_fcf_record), | 
|  | new_fcf_record); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_register_fcf - Register the FCF with hba. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * | 
|  | * This routine issues a register fcfi mailbox command to register | 
|  | * the fcf with HBA. | 
|  | **/ | 
|  | static void | 
|  | lpfc_register_fcf(struct lpfc_hba *phba) | 
|  | { | 
|  | LPFC_MBOXQ_t *fcf_mbxq; | 
|  | int rc; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | /* If the FCF is not available do nothing. */ | 
|  | if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) { | 
|  | phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* The FCF is already registered, start discovery */ | 
|  | if (phba->fcf.fcf_flag & FCF_REGISTERED) { | 
|  | phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); | 
|  | phba->hba_flag &= ~FCF_TS_INPROG; | 
|  | if (phba->pport->port_state != LPFC_FLOGI) { | 
|  | phba->hba_flag |= FCF_RR_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_initial_flogi(phba->pport); | 
|  | return; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!fcf_mbxq) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | lpfc_reg_fcfi(phba, fcf_mbxq); | 
|  | fcf_mbxq->vport = phba->pport; | 
|  | fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi; | 
|  | rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | mempool_free(fcf_mbxq, phba->mbox_mem_pool); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @new_fcf_record: pointer to fcf record. | 
|  | * @boot_flag: Indicates if this record used by boot bios. | 
|  | * @addr_mode: The address mode to be used by this FCF | 
|  | * @vlan_id: The vlan id to be used as vlan tagging by this FCF. | 
|  | * | 
|  | * This routine compare the fcf record with connect list obtained from the | 
|  | * config region to decide if this FCF can be used for SAN discovery. It returns | 
|  | * 1 if this record can be used for SAN discovery else return zero. If this FCF | 
|  | * record can be used for SAN discovery, the boot_flag will indicate if this FCF | 
|  | * is used by boot bios and addr_mode will indicate the addressing mode to be | 
|  | * used for this FCF when the function returns. | 
|  | * If the FCF record need to be used with a particular vlan id, the vlan is | 
|  | * set in the vlan_id on return of the function. If not VLAN tagging need to | 
|  | * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID; | 
|  | **/ | 
|  | static int | 
|  | lpfc_match_fcf_conn_list(struct lpfc_hba *phba, | 
|  | struct fcf_record *new_fcf_record, | 
|  | uint32_t *boot_flag, uint32_t *addr_mode, | 
|  | uint16_t *vlan_id) | 
|  | { | 
|  | struct lpfc_fcf_conn_entry *conn_entry; | 
|  | int i, j, fcf_vlan_id = 0; | 
|  |  | 
|  | /* Find the lowest VLAN id in the FCF record */ | 
|  | for (i = 0; i < 512; i++) { | 
|  | if (new_fcf_record->vlan_bitmap[i]) { | 
|  | fcf_vlan_id = i * 8; | 
|  | j = 0; | 
|  | while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) { | 
|  | j++; | 
|  | fcf_vlan_id++; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If FCF not available return 0 */ | 
|  | if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) || | 
|  | !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record)) | 
|  | return 0; | 
|  |  | 
|  | if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { | 
|  | *boot_flag = 0; | 
|  | *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
|  | new_fcf_record); | 
|  | if (phba->valid_vlan) | 
|  | *vlan_id = phba->vlan_id; | 
|  | else | 
|  | *vlan_id = LPFC_FCOE_NULL_VID; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If there are no FCF connection table entry, driver connect to all | 
|  | * FCFs. | 
|  | */ | 
|  | if (list_empty(&phba->fcf_conn_rec_list)) { | 
|  | *boot_flag = 0; | 
|  | *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
|  | new_fcf_record); | 
|  |  | 
|  | /* | 
|  | * When there are no FCF connect entries, use driver's default | 
|  | * addressing mode - FPMA. | 
|  | */ | 
|  | if (*addr_mode & LPFC_FCF_FPMA) | 
|  | *addr_mode = LPFC_FCF_FPMA; | 
|  |  | 
|  | /* If FCF record report a vlan id use that vlan id */ | 
|  | if (fcf_vlan_id) | 
|  | *vlan_id = fcf_vlan_id; | 
|  | else | 
|  | *vlan_id = LPFC_FCOE_NULL_VID; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(conn_entry, | 
|  | &phba->fcf_conn_rec_list, list) { | 
|  | if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID)) | 
|  | continue; | 
|  |  | 
|  | if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) && | 
|  | !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name, | 
|  | new_fcf_record)) | 
|  | continue; | 
|  | if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) && | 
|  | !lpfc_sw_name_match(conn_entry->conn_rec.switch_name, | 
|  | new_fcf_record)) | 
|  | continue; | 
|  | if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) { | 
|  | /* | 
|  | * If the vlan bit map does not have the bit set for the | 
|  | * vlan id to be used, then it is not a match. | 
|  | */ | 
|  | if (!(new_fcf_record->vlan_bitmap | 
|  | [conn_entry->conn_rec.vlan_tag / 8] & | 
|  | (1 << (conn_entry->conn_rec.vlan_tag % 8)))) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If connection record does not support any addressing mode, | 
|  | * skip the FCF record. | 
|  | */ | 
|  | if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record) | 
|  | & (LPFC_FCF_FPMA | LPFC_FCF_SPMA))) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Check if the connection record specifies a required | 
|  | * addressing mode. | 
|  | */ | 
|  | if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
|  | !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) { | 
|  |  | 
|  | /* | 
|  | * If SPMA required but FCF not support this continue. | 
|  | */ | 
|  | if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
|  | !(bf_get(lpfc_fcf_record_mac_addr_prov, | 
|  | new_fcf_record) & LPFC_FCF_SPMA)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * If FPMA required but FCF not support this continue. | 
|  | */ | 
|  | if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
|  | !(bf_get(lpfc_fcf_record_mac_addr_prov, | 
|  | new_fcf_record) & LPFC_FCF_FPMA)) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This fcf record matches filtering criteria. | 
|  | */ | 
|  | if (conn_entry->conn_rec.flags & FCFCNCT_BOOT) | 
|  | *boot_flag = 1; | 
|  | else | 
|  | *boot_flag = 0; | 
|  |  | 
|  | /* | 
|  | * If user did not specify any addressing mode, or if the | 
|  | * preferred addressing mode specified by user is not supported | 
|  | * by FCF, allow fabric to pick the addressing mode. | 
|  | */ | 
|  | *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
|  | new_fcf_record); | 
|  | /* | 
|  | * If the user specified a required address mode, assign that | 
|  | * address mode | 
|  | */ | 
|  | if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
|  | (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED))) | 
|  | *addr_mode = (conn_entry->conn_rec.flags & | 
|  | FCFCNCT_AM_SPMA) ? | 
|  | LPFC_FCF_SPMA : LPFC_FCF_FPMA; | 
|  | /* | 
|  | * If the user specified a preferred address mode, use the | 
|  | * addr mode only if FCF support the addr_mode. | 
|  | */ | 
|  | else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
|  | (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && | 
|  | (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
|  | (*addr_mode & LPFC_FCF_SPMA)) | 
|  | *addr_mode = LPFC_FCF_SPMA; | 
|  | else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
|  | (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && | 
|  | !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
|  | (*addr_mode & LPFC_FCF_FPMA)) | 
|  | *addr_mode = LPFC_FCF_FPMA; | 
|  |  | 
|  | /* If matching connect list has a vlan id, use it */ | 
|  | if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) | 
|  | *vlan_id = conn_entry->conn_rec.vlan_tag; | 
|  | /* | 
|  | * If no vlan id is specified in connect list, use the vlan id | 
|  | * in the FCF record | 
|  | */ | 
|  | else if (fcf_vlan_id) | 
|  | *vlan_id = fcf_vlan_id; | 
|  | else | 
|  | *vlan_id = LPFC_FCOE_NULL_VID; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned. | 
|  | * | 
|  | * This function check if there is any fcoe event pending while driver | 
|  | * scan FCF entries. If there is any pending event, it will restart the | 
|  | * FCF saning and return 1 else return 0. | 
|  | */ | 
|  | int | 
|  | lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf) | 
|  | { | 
|  | /* | 
|  | * If the Link is up and no FCoE events while in the | 
|  | * FCF discovery, no need to restart FCF discovery. | 
|  | */ | 
|  | if ((phba->link_state  >= LPFC_LINK_UP) && | 
|  | (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan)) | 
|  | return 0; | 
|  |  | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2768 Pending link or FCF event during current " | 
|  | "handling of the previous event: link_state:x%x, " | 
|  | "evt_tag_at_scan:x%x, evt_tag_current:x%x\n", | 
|  | phba->link_state, phba->fcoe_eventtag_at_fcf_scan, | 
|  | phba->fcoe_eventtag); | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_AVAILABLE; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | if (phba->link_state >= LPFC_LINK_UP) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
|  | "2780 Restart FCF table scan due to " | 
|  | "pending FCF event:evt_tag_at_scan:x%x, " | 
|  | "evt_tag_current:x%x\n", | 
|  | phba->fcoe_eventtag_at_fcf_scan, | 
|  | phba->fcoe_eventtag); | 
|  | lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); | 
|  | } else { | 
|  | /* | 
|  | * Do not continue FCF discovery and clear FCF_TS_INPROG | 
|  | * flag | 
|  | */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
|  | "2833 Stop FCF discovery process due to link " | 
|  | "state change (x%x)\n", phba->link_state); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); | 
|  | phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  |  | 
|  | /* Unregister the currently registered FCF if required */ | 
|  | if (unreg_fcf) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_REGISTERED; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_sli4_unregister_fcf(phba); | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_cnt: number of eligible fcf record seen so far. | 
|  | * | 
|  | * This function makes an running random selection decision on FCF record to | 
|  | * use through a sequence of @fcf_cnt eligible FCF records with equal | 
|  | * probability. To perform integer manunipulation of random numbers with | 
|  | * size unit32_t, the lower 16 bits of the 32-bit random number returned | 
|  | * from random32() are taken as the random random number generated. | 
|  | * | 
|  | * Returns true when outcome is for the newly read FCF record should be | 
|  | * chosen; otherwise, return false when outcome is for keeping the previously | 
|  | * chosen FCF record. | 
|  | **/ | 
|  | static bool | 
|  | lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt) | 
|  | { | 
|  | uint32_t rand_num; | 
|  |  | 
|  | /* Get 16-bit uniform random number */ | 
|  | rand_num = (0xFFFF & random32()); | 
|  |  | 
|  | /* Decision with probability 1/fcf_cnt */ | 
|  | if ((fcf_cnt * rand_num) < 0xFFFF) | 
|  | return true; | 
|  | else | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox object. | 
|  | * @next_fcf_index: pointer to holder of next fcf index. | 
|  | * | 
|  | * This routine parses the non-embedded fcf mailbox command by performing the | 
|  | * necessarily error checking, non-embedded read FCF record mailbox command | 
|  | * SGE parsing, and endianness swapping. | 
|  | * | 
|  | * Returns the pointer to the new FCF record in the non-embedded mailbox | 
|  | * command DMA memory if successfully, other NULL. | 
|  | */ | 
|  | static struct fcf_record * | 
|  | lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, | 
|  | uint16_t *next_fcf_index) | 
|  | { | 
|  | void *virt_addr; | 
|  | dma_addr_t phys_addr; | 
|  | struct lpfc_mbx_sge sge; | 
|  | struct lpfc_mbx_read_fcf_tbl *read_fcf; | 
|  | uint32_t shdr_status, shdr_add_status; | 
|  | union lpfc_sli4_cfg_shdr *shdr; | 
|  | struct fcf_record *new_fcf_record; | 
|  |  | 
|  | /* Get the first SGE entry from the non-embedded DMA memory. This | 
|  | * routine only uses a single SGE. | 
|  | */ | 
|  | lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); | 
|  | phys_addr = getPaddr(sge.pa_hi, sge.pa_lo); | 
|  | if (unlikely(!mboxq->sge_array)) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, | 
|  | "2524 Failed to get the non-embedded SGE " | 
|  | "virtual address\n"); | 
|  | return NULL; | 
|  | } | 
|  | virt_addr = mboxq->sge_array->addr[0]; | 
|  |  | 
|  | shdr = (union lpfc_sli4_cfg_shdr *)virt_addr; | 
|  | shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); | 
|  | shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); | 
|  | if (shdr_status || shdr_add_status) { | 
|  | if (shdr_status == STATUS_FCF_TABLE_EMPTY) | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_FIP, | 
|  | "2726 READ_FCF_RECORD Indicates empty " | 
|  | "FCF table.\n"); | 
|  | else | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_FIP, | 
|  | "2521 READ_FCF_RECORD mailbox failed " | 
|  | "with status x%x add_status x%x, " | 
|  | "mbx\n", shdr_status, shdr_add_status); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Interpreting the returned information of the FCF record */ | 
|  | read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; | 
|  | lpfc_sli_pcimem_bcopy(read_fcf, read_fcf, | 
|  | sizeof(struct lpfc_mbx_read_fcf_tbl)); | 
|  | *next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf); | 
|  | new_fcf_record = (struct fcf_record *)(virt_addr + | 
|  | sizeof(struct lpfc_mbx_read_fcf_tbl)); | 
|  | lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record, | 
|  | offsetof(struct fcf_record, vlan_bitmap)); | 
|  | new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137); | 
|  | new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138); | 
|  |  | 
|  | return new_fcf_record; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_record: pointer to the fcf record. | 
|  | * @vlan_id: the lowest vlan identifier associated to this fcf record. | 
|  | * @next_fcf_index: the index to the next fcf record in hba's fcf table. | 
|  | * | 
|  | * This routine logs the detailed FCF record if the LOG_FIP loggin is | 
|  | * enabled. | 
|  | **/ | 
|  | static void | 
|  | lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba, | 
|  | struct fcf_record *fcf_record, | 
|  | uint16_t vlan_id, | 
|  | uint16_t next_fcf_index) | 
|  | { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2764 READ_FCF_RECORD:\n" | 
|  | "\tFCF_Index     : x%x\n" | 
|  | "\tFCF_Avail     : x%x\n" | 
|  | "\tFCF_Valid     : x%x\n" | 
|  | "\tFIP_Priority  : x%x\n" | 
|  | "\tMAC_Provider  : x%x\n" | 
|  | "\tLowest VLANID : x%x\n" | 
|  | "\tFCF_MAC Addr  : x%x:%x:%x:%x:%x:%x\n" | 
|  | "\tFabric_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n" | 
|  | "\tSwitch_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n" | 
|  | "\tNext_FCF_Index: x%x\n", | 
|  | bf_get(lpfc_fcf_record_fcf_index, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fcf_avail, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fcf_valid, fcf_record), | 
|  | fcf_record->fip_priority, | 
|  | bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record), | 
|  | vlan_id, | 
|  | bf_get(lpfc_fcf_record_mac_0, fcf_record), | 
|  | bf_get(lpfc_fcf_record_mac_1, fcf_record), | 
|  | bf_get(lpfc_fcf_record_mac_2, fcf_record), | 
|  | bf_get(lpfc_fcf_record_mac_3, fcf_record), | 
|  | bf_get(lpfc_fcf_record_mac_4, fcf_record), | 
|  | bf_get(lpfc_fcf_record_mac_5, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_0, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_1, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_2, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_3, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_4, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_5, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_6, fcf_record), | 
|  | bf_get(lpfc_fcf_record_fab_name_7, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_0, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_1, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_2, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_3, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_4, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_5, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_6, fcf_record), | 
|  | bf_get(lpfc_fcf_record_switch_name_7, fcf_record), | 
|  | next_fcf_index); | 
|  | } | 
|  |  | 
|  | /** | 
|  | lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_rec: pointer to an existing FCF record. | 
|  | * @new_fcf_record: pointer to a new FCF record. | 
|  | * @new_vlan_id: vlan id from the new FCF record. | 
|  | * | 
|  | * This function performs matching test of a new FCF record against an existing | 
|  | * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id | 
|  | * will not be used as part of the FCF record matching criteria. | 
|  | * | 
|  | * Returns true if all the fields matching, otherwise returns false. | 
|  | */ | 
|  | static bool | 
|  | lpfc_sli4_fcf_record_match(struct lpfc_hba *phba, | 
|  | struct lpfc_fcf_rec *fcf_rec, | 
|  | struct fcf_record *new_fcf_record, | 
|  | uint16_t new_vlan_id) | 
|  | { | 
|  | if (new_vlan_id != LPFC_FCOE_IGNORE_VID) | 
|  | if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id)) | 
|  | return false; | 
|  | if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record)) | 
|  | return false; | 
|  | if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record)) | 
|  | return false; | 
|  | if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record)) | 
|  | return false; | 
|  | if (fcf_rec->priority != new_fcf_record->fip_priority) | 
|  | return false; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf | 
|  | * @vport: Pointer to vport object. | 
|  | * @fcf_index: index to next fcf. | 
|  | * | 
|  | * This function processing the roundrobin fcf failover to next fcf index. | 
|  | * When this function is invoked, there will be a current fcf registered | 
|  | * for flogi. | 
|  | * Return: 0 for continue retrying flogi on currently registered fcf; | 
|  | *         1 for stop flogi on currently registered fcf; | 
|  | */ | 
|  | int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index) | 
|  | { | 
|  | struct lpfc_hba *phba = vport->phba; | 
|  | int rc; | 
|  |  | 
|  | if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (phba->hba_flag & HBA_DEVLOSS_TMO) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2872 Devloss tmo with no eligible " | 
|  | "FCF, unregister in-use FCF (x%x) " | 
|  | "and rescan FCF table\n", | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | lpfc_unregister_fcf_rescan(phba); | 
|  | goto stop_flogi_current_fcf; | 
|  | } | 
|  | /* Mark the end to FLOGI roundrobin failover */ | 
|  | phba->hba_flag &= ~FCF_RR_INPROG; | 
|  | /* Allow action to new fcf asynchronous event */ | 
|  | phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2865 No FCF available, stop roundrobin FCF " | 
|  | "failover and change port state:x%x/x%x\n", | 
|  | phba->pport->port_state, LPFC_VPORT_UNKNOWN); | 
|  | phba->pport->port_state = LPFC_VPORT_UNKNOWN; | 
|  | goto stop_flogi_current_fcf; | 
|  | } else { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS, | 
|  | "2794 Try FLOGI roundrobin FCF failover to " | 
|  | "(x%x)\n", fcf_index); | 
|  | rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index); | 
|  | if (rc) | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, | 
|  | "2761 FLOGI roundrobin FCF failover " | 
|  | "failed (rc:x%x) to read FCF (x%x)\n", | 
|  | rc, phba->fcf.current_rec.fcf_indx); | 
|  | else | 
|  | goto stop_flogi_current_fcf; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | stop_flogi_current_fcf: | 
|  | lpfc_can_disctmo(vport); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_fcf_pri_list_del | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_index the index of the fcf record to delete | 
|  | * This routine checks the on list flag of the fcf_index to be deleted. | 
|  | * If it is one the list then it is removed from the list, and the flag | 
|  | * is cleared. This routine grab the hbalock before removing the fcf | 
|  | * record from the list. | 
|  | **/ | 
|  | static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, | 
|  | uint16_t fcf_index) | 
|  | { | 
|  | struct lpfc_fcf_pri *new_fcf_pri; | 
|  |  | 
|  | new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "3058 deleting idx x%x pri x%x flg x%x\n", | 
|  | fcf_index, new_fcf_pri->fcf_rec.priority, | 
|  | new_fcf_pri->fcf_rec.flag); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) { | 
|  | if (phba->fcf.current_rec.priority == | 
|  | new_fcf_pri->fcf_rec.priority) | 
|  | phba->fcf.eligible_fcf_cnt--; | 
|  | list_del_init(&new_fcf_pri->list); | 
|  | new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_set_fcf_flogi_fail | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_index the index of the fcf record to update | 
|  | * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED | 
|  | * flag so the the round robin slection for the particular priority level | 
|  | * will try a different fcf record that does not have this bit set. | 
|  | * If the fcf record is re-read for any reason this flag is cleared brfore | 
|  | * adding it to the priority list. | 
|  | **/ | 
|  | void | 
|  | lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index) | 
|  | { | 
|  | struct lpfc_fcf_pri *new_fcf_pri; | 
|  | new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_fcf_pri_list_add | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @fcf_index the index of the fcf record to add | 
|  | * This routine checks the priority of the fcf_index to be added. | 
|  | * If it is a lower priority than the current head of the fcf_pri list | 
|  | * then it is added to the list in the right order. | 
|  | * If it is the same priority as the current head of the list then it | 
|  | * is added to the head of the list and its bit in the rr_bmask is set. | 
|  | * If the fcf_index to be added is of a higher priority than the current | 
|  | * head of the list then the rr_bmask is cleared, its bit is set in the | 
|  | * rr_bmask and it is added to the head of the list. | 
|  | * returns: | 
|  | * 0=success 1=failure | 
|  | **/ | 
|  | int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, uint16_t fcf_index, | 
|  | struct fcf_record *new_fcf_record) | 
|  | { | 
|  | uint16_t current_fcf_pri; | 
|  | uint16_t last_index; | 
|  | struct lpfc_fcf_pri *fcf_pri; | 
|  | struct lpfc_fcf_pri *next_fcf_pri; | 
|  | struct lpfc_fcf_pri *new_fcf_pri; | 
|  | int ret; | 
|  |  | 
|  | new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "3059 adding idx x%x pri x%x flg x%x\n", | 
|  | fcf_index, new_fcf_record->fip_priority, | 
|  | new_fcf_pri->fcf_rec.flag); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) | 
|  | list_del_init(&new_fcf_pri->list); | 
|  | new_fcf_pri->fcf_rec.fcf_index = fcf_index; | 
|  | new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; | 
|  | if (list_empty(&phba->fcf.fcf_pri_list)) { | 
|  | list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); | 
|  | ret = lpfc_sli4_fcf_rr_index_set(phba, | 
|  | new_fcf_pri->fcf_rec.fcf_index); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | last_index = find_first_bit(phba->fcf.fcf_rr_bmask, | 
|  | LPFC_SLI4_FCF_TBL_INDX_MAX); | 
|  | if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) { | 
|  | ret = 0; /* Empty rr list */ | 
|  | goto out; | 
|  | } | 
|  | current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority; | 
|  | if (new_fcf_pri->fcf_rec.priority <=  current_fcf_pri) { | 
|  | list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); | 
|  | if (new_fcf_pri->fcf_rec.priority <  current_fcf_pri) { | 
|  | memset(phba->fcf.fcf_rr_bmask, 0, | 
|  | sizeof(*phba->fcf.fcf_rr_bmask)); | 
|  | /* fcfs_at_this_priority_level = 1; */ | 
|  | phba->fcf.eligible_fcf_cnt = 1; | 
|  | } else | 
|  | /* fcfs_at_this_priority_level++; */ | 
|  | phba->fcf.eligible_fcf_cnt++; | 
|  | ret = lpfc_sli4_fcf_rr_index_set(phba, | 
|  | new_fcf_pri->fcf_rec.fcf_index); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(fcf_pri, next_fcf_pri, | 
|  | &phba->fcf.fcf_pri_list, list) { | 
|  | if (new_fcf_pri->fcf_rec.priority <= | 
|  | fcf_pri->fcf_rec.priority) { | 
|  | if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list) | 
|  | list_add(&new_fcf_pri->list, | 
|  | &phba->fcf.fcf_pri_list); | 
|  | else | 
|  | list_add(&new_fcf_pri->list, | 
|  | &((struct lpfc_fcf_pri *) | 
|  | fcf_pri->list.prev)->list); | 
|  | ret = 0; | 
|  | goto out; | 
|  | } else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list | 
|  | || new_fcf_pri->fcf_rec.priority < | 
|  | next_fcf_pri->fcf_rec.priority) { | 
|  | list_add(&new_fcf_pri->list, &fcf_pri->list); | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  | if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority) | 
|  | continue; | 
|  |  | 
|  | } | 
|  | ret = 1; | 
|  | out: | 
|  | /* we use = instead of |= to clear the FLOGI_FAILED flag. */ | 
|  | new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox object. | 
|  | * | 
|  | * This function iterates through all the fcf records available in | 
|  | * HBA and chooses the optimal FCF record for discovery. After finding | 
|  | * the FCF for discovery it registers the FCF record and kicks start | 
|  | * discovery. | 
|  | * If FCF_IN_USE flag is set in currently used FCF, the routine tries to | 
|  | * use an FCF record which matches fabric name and mac address of the | 
|  | * currently used FCF record. | 
|  | * If the driver supports only one FCF, it will try to use the FCF record | 
|  | * used by BOOT_BIOS. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct fcf_record *new_fcf_record; | 
|  | uint32_t boot_flag, addr_mode; | 
|  | uint16_t fcf_index, next_fcf_index; | 
|  | struct lpfc_fcf_rec *fcf_rec = NULL; | 
|  | uint16_t vlan_id; | 
|  | uint32_t seed; | 
|  | bool select_new_fcf; | 
|  | int rc; | 
|  |  | 
|  | /* If there is pending FCoE event restart FCF table scan */ | 
|  | if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) { | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Parse the FCF record from the non-embedded mailbox command */ | 
|  | new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
|  | &next_fcf_index); | 
|  | if (!new_fcf_record) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_FIP, | 
|  | "2765 Mailbox command READ_FCF_RECORD " | 
|  | "failed to retrieve a FCF record.\n"); | 
|  | /* Let next new FCF event trigger fast failover */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->hba_flag &= ~FCF_TS_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Check the FCF record against the connection list */ | 
|  | rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
|  | &addr_mode, &vlan_id); | 
|  |  | 
|  | /* Log the FCF record information if turned on */ | 
|  | lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
|  | next_fcf_index); | 
|  |  | 
|  | /* | 
|  | * If the fcf record does not match with connect list entries | 
|  | * read the next entry; otherwise, this is an eligible FCF | 
|  | * record for roundrobin FCF failover. | 
|  | */ | 
|  | if (!rc) { | 
|  | lpfc_sli4_fcf_pri_list_del(phba, | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
|  | "2781 FCF (x%x) failed connection " | 
|  | "list check: (x%x/x%x)\n", | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record), | 
|  | bf_get(lpfc_fcf_record_fcf_avail, | 
|  | new_fcf_record), | 
|  | bf_get(lpfc_fcf_record_fcf_valid, | 
|  | new_fcf_record)); | 
|  | if ((phba->fcf.fcf_flag & FCF_IN_USE) && | 
|  | lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, | 
|  | new_fcf_record, LPFC_FCOE_IGNORE_VID)) { | 
|  | if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) != | 
|  | phba->fcf.current_rec.fcf_indx) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_FIP, | 
|  | "2862 FCF (x%x) matches property " | 
|  | "of in-use FCF (x%x)\n", | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record), | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | goto read_next_fcf; | 
|  | } | 
|  | /* | 
|  | * In case the current in-use FCF record becomes | 
|  | * invalid/unavailable during FCF discovery that | 
|  | * was not triggered by fast FCF failover process, | 
|  | * treat it as fast FCF failover. | 
|  | */ | 
|  | if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) && | 
|  | !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
|  | "2835 Invalid in-use FCF " | 
|  | "(x%x), enter FCF failover " | 
|  | "table scan.\n", | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag |= FCF_REDISC_FOV; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
|  | LPFC_FCOE_FCF_GET_FIRST); | 
|  | return; | 
|  | } | 
|  | } | 
|  | goto read_next_fcf; | 
|  | } else { | 
|  | fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
|  | rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, | 
|  | new_fcf_record); | 
|  | if (rc) | 
|  | goto read_next_fcf; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this is not the first FCF discovery of the HBA, use last | 
|  | * FCF record for the discovery. The condition that a rescan | 
|  | * matches the in-use FCF record: fabric name, switch name, mac | 
|  | * address, and vlan_id. | 
|  | */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (phba->fcf.fcf_flag & FCF_IN_USE) { | 
|  | if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && | 
|  | lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, | 
|  | new_fcf_record, vlan_id)) { | 
|  | if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) == | 
|  | phba->fcf.current_rec.fcf_indx) { | 
|  | phba->fcf.fcf_flag |= FCF_AVAILABLE; | 
|  | if (phba->fcf.fcf_flag & FCF_REDISC_PEND) | 
|  | /* Stop FCF redisc wait timer */ | 
|  | __lpfc_sli4_stop_fcf_redisc_wait_timer( | 
|  | phba); | 
|  | else if (phba->fcf.fcf_flag & FCF_REDISC_FOV) | 
|  | /* Fast failover, mark completed */ | 
|  | phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2836 New FCF matches in-use " | 
|  | "FCF (x%x)\n", | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | goto out; | 
|  | } else | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_FIP, | 
|  | "2863 New FCF (x%x) matches " | 
|  | "property of in-use FCF (x%x)\n", | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record), | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | } | 
|  | /* | 
|  | * Read next FCF record from HBA searching for the matching | 
|  | * with in-use record only if not during the fast failover | 
|  | * period. In case of fast failover period, it shall try to | 
|  | * determine whether the FCF record just read should be the | 
|  | * next candidate. | 
|  | */ | 
|  | if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto read_next_fcf; | 
|  | } | 
|  | } | 
|  | /* | 
|  | * Update on failover FCF record only if it's in FCF fast-failover | 
|  | * period; otherwise, update on current FCF record. | 
|  | */ | 
|  | if (phba->fcf.fcf_flag & FCF_REDISC_FOV) | 
|  | fcf_rec = &phba->fcf.failover_rec; | 
|  | else | 
|  | fcf_rec = &phba->fcf.current_rec; | 
|  |  | 
|  | if (phba->fcf.fcf_flag & FCF_AVAILABLE) { | 
|  | /* | 
|  | * If the driver FCF record does not have boot flag | 
|  | * set and new hba fcf record has boot flag set, use | 
|  | * the new hba fcf record. | 
|  | */ | 
|  | if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) { | 
|  | /* Choose this FCF record */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2837 Update current FCF record " | 
|  | "(x%x) with new FCF record (x%x)\n", | 
|  | fcf_rec->fcf_indx, | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
|  | addr_mode, vlan_id, BOOT_ENABLE); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto read_next_fcf; | 
|  | } | 
|  | /* | 
|  | * If the driver FCF record has boot flag set and the | 
|  | * new hba FCF record does not have boot flag, read | 
|  | * the next FCF record. | 
|  | */ | 
|  | if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto read_next_fcf; | 
|  | } | 
|  | /* | 
|  | * If the new hba FCF record has lower priority value | 
|  | * than the driver FCF record, use the new record. | 
|  | */ | 
|  | if (new_fcf_record->fip_priority < fcf_rec->priority) { | 
|  | /* Choose the new FCF record with lower priority */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2838 Update current FCF record " | 
|  | "(x%x) with new FCF record (x%x)\n", | 
|  | fcf_rec->fcf_indx, | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
|  | addr_mode, vlan_id, 0); | 
|  | /* Reset running random FCF selection count */ | 
|  | phba->fcf.eligible_fcf_cnt = 1; | 
|  | } else if (new_fcf_record->fip_priority == fcf_rec->priority) { | 
|  | /* Update running random FCF selection count */ | 
|  | phba->fcf.eligible_fcf_cnt++; | 
|  | select_new_fcf = lpfc_sli4_new_fcf_random_select(phba, | 
|  | phba->fcf.eligible_fcf_cnt); | 
|  | if (select_new_fcf) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2839 Update current FCF record " | 
|  | "(x%x) with new FCF record (x%x)\n", | 
|  | fcf_rec->fcf_indx, | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | /* Choose the new FCF by random selection */ | 
|  | __lpfc_update_fcf_record(phba, fcf_rec, | 
|  | new_fcf_record, | 
|  | addr_mode, vlan_id, 0); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto read_next_fcf; | 
|  | } | 
|  | /* | 
|  | * This is the first suitable FCF record, choose this record for | 
|  | * initial best-fit FCF. | 
|  | */ | 
|  | if (fcf_rec) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2840 Update initial FCF candidate " | 
|  | "with FCF (x%x)\n", | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
|  | addr_mode, vlan_id, (boot_flag ? | 
|  | BOOT_ENABLE : 0)); | 
|  | phba->fcf.fcf_flag |= FCF_AVAILABLE; | 
|  | /* Setup initial running random FCF selection count */ | 
|  | phba->fcf.eligible_fcf_cnt = 1; | 
|  | /* Seeding the random number generator for random selection */ | 
|  | seed = (uint32_t)(0xFFFFFFFF & jiffies); | 
|  | srandom32(seed); | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto read_next_fcf; | 
|  |  | 
|  | read_next_fcf: | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) { | 
|  | if (phba->fcf.fcf_flag & FCF_REDISC_FOV) { | 
|  | /* | 
|  | * Case of FCF fast failover scan | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * It has not found any suitable FCF record, cancel | 
|  | * FCF scan inprogress, and do nothing | 
|  | */ | 
|  | if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) { | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
|  | "2782 No suitable FCF found: " | 
|  | "(x%x/x%x)\n", | 
|  | phba->fcoe_eventtag_at_fcf_scan, | 
|  | bf_get(lpfc_fcf_record_fcf_index, | 
|  | new_fcf_record)); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (phba->hba_flag & HBA_DEVLOSS_TMO) { | 
|  | phba->hba_flag &= ~FCF_TS_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | /* Unregister in-use FCF and rescan */ | 
|  | lpfc_printf_log(phba, KERN_INFO, | 
|  | LOG_FIP, | 
|  | "2864 On devloss tmo " | 
|  | "unreg in-use FCF and " | 
|  | "rescan FCF table\n"); | 
|  | lpfc_unregister_fcf_rescan(phba); | 
|  | return; | 
|  | } | 
|  | /* | 
|  | * Let next new FCF event trigger fast failover | 
|  | */ | 
|  | phba->hba_flag &= ~FCF_TS_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  | /* | 
|  | * It has found a suitable FCF record that is not | 
|  | * the same as in-use FCF record, unregister the | 
|  | * in-use FCF record, replace the in-use FCF record | 
|  | * with the new FCF record, mark FCF fast failover | 
|  | * completed, and then start register the new FCF | 
|  | * record. | 
|  | */ | 
|  |  | 
|  | /* Unregister the current in-use FCF record */ | 
|  | lpfc_unregister_fcf(phba); | 
|  |  | 
|  | /* Replace in-use record with the new record */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2842 Replace in-use FCF (x%x) " | 
|  | "with failover FCF (x%x)\n", | 
|  | phba->fcf.current_rec.fcf_indx, | 
|  | phba->fcf.failover_rec.fcf_indx); | 
|  | memcpy(&phba->fcf.current_rec, | 
|  | &phba->fcf.failover_rec, | 
|  | sizeof(struct lpfc_fcf_rec)); | 
|  | /* | 
|  | * Mark the fast FCF failover rediscovery completed | 
|  | * and the start of the first round of the roundrobin | 
|  | * FCF failover. | 
|  | */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | /* Register to the new FCF record */ | 
|  | lpfc_register_fcf(phba); | 
|  | } else { | 
|  | /* | 
|  | * In case of transaction period to fast FCF failover, | 
|  | * do nothing when search to the end of the FCF table. | 
|  | */ | 
|  | if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) || | 
|  | (phba->fcf.fcf_flag & FCF_REDISC_PEND)) | 
|  | return; | 
|  |  | 
|  | if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && | 
|  | phba->fcf.fcf_flag & FCF_IN_USE) { | 
|  | /* | 
|  | * In case the current in-use FCF record no | 
|  | * longer existed during FCF discovery that | 
|  | * was not triggered by fast FCF failover | 
|  | * process, treat it as fast FCF failover. | 
|  | */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2841 In-use FCF record (x%x) " | 
|  | "not reported, entering fast " | 
|  | "FCF failover mode scanning.\n", | 
|  | phba->fcf.current_rec.fcf_indx); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag |= FCF_REDISC_FOV; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
|  | LPFC_FCOE_FCF_GET_FIRST); | 
|  | return; | 
|  | } | 
|  | /* Register to the new FCF record */ | 
|  | lpfc_register_fcf(phba); | 
|  | } | 
|  | } else | 
|  | lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index); | 
|  | return; | 
|  |  | 
|  | out: | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | lpfc_register_fcf(phba); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox object. | 
|  | * | 
|  | * This is the callback function for FLOGI failure roundrobin FCF failover | 
|  | * read FCF record mailbox command from the eligible FCF record bmask for | 
|  | * performing the failover. If the FCF read back is not valid/available, it | 
|  | * fails through to retrying FLOGI to the currently registered FCF again. | 
|  | * Otherwise, if the FCF read back is valid and available, it will set the | 
|  | * newly read FCF record to the failover FCF record, unregister currently | 
|  | * registered FCF record, copy the failover FCF record to the current | 
|  | * FCF record, and then register the current FCF record before proceeding | 
|  | * to trying FLOGI on the new failover FCF. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct fcf_record *new_fcf_record; | 
|  | uint32_t boot_flag, addr_mode; | 
|  | uint16_t next_fcf_index, fcf_index; | 
|  | uint16_t current_fcf_index; | 
|  | uint16_t vlan_id; | 
|  | int rc; | 
|  |  | 
|  | /* If link state is not up, stop the roundrobin failover process */ | 
|  | if (phba->link_state < LPFC_LINK_UP) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_DISCOVERY; | 
|  | phba->hba_flag &= ~FCF_RR_INPROG; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Parse the FCF record from the non-embedded mailbox command */ | 
|  | new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
|  | &next_fcf_index); | 
|  | if (!new_fcf_record) { | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
|  | "2766 Mailbox command READ_FCF_RECORD " | 
|  | "failed to retrieve a FCF record.\n"); | 
|  | goto error_out; | 
|  | } | 
|  |  | 
|  | /* Get the needed parameters from FCF record */ | 
|  | rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
|  | &addr_mode, &vlan_id); | 
|  |  | 
|  | /* Log the FCF record information if turned on */ | 
|  | lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
|  | next_fcf_index); | 
|  |  | 
|  | fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
|  | if (!rc) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2848 Remove ineligible FCF (x%x) from " | 
|  | "from roundrobin bmask\n", fcf_index); | 
|  | /* Clear roundrobin bmask bit for ineligible FCF */ | 
|  | lpfc_sli4_fcf_rr_index_clear(phba, fcf_index); | 
|  | /* Perform next round of roundrobin FCF failover */ | 
|  | fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba); | 
|  | rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index); | 
|  | if (rc) | 
|  | goto out; | 
|  | goto error_out; | 
|  | } | 
|  |  | 
|  | if (fcf_index == phba->fcf.current_rec.fcf_indx) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2760 Perform FLOGI roundrobin FCF failover: " | 
|  | "FCF (x%x) back to FCF (x%x)\n", | 
|  | phba->fcf.current_rec.fcf_indx, fcf_index); | 
|  | /* Wait 500 ms before retrying FLOGI to current FCF */ | 
|  | msleep(500); | 
|  | lpfc_issue_init_vfi(phba->pport); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Upload new FCF record to the failover FCF record */ | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2834 Update current FCF (x%x) with new FCF (x%x)\n", | 
|  | phba->fcf.failover_rec.fcf_indx, fcf_index); | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | __lpfc_update_fcf_record(phba, &phba->fcf.failover_rec, | 
|  | new_fcf_record, addr_mode, vlan_id, | 
|  | (boot_flag ? BOOT_ENABLE : 0)); | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | current_fcf_index = phba->fcf.current_rec.fcf_indx; | 
|  |  | 
|  | /* Unregister the current in-use FCF record */ | 
|  | lpfc_unregister_fcf(phba); | 
|  |  | 
|  | /* Replace in-use record with the new record */ | 
|  | memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec, | 
|  | sizeof(struct lpfc_fcf_rec)); | 
|  |  | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2783 Perform FLOGI roundrobin FCF failover: FCF " | 
|  | "(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index); | 
|  |  | 
|  | error_out: | 
|  | lpfc_register_fcf(phba); | 
|  | out: | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox object. | 
|  | * | 
|  | * This is the callback function of read FCF record mailbox command for | 
|  | * updating the eligible FCF bmask for FLOGI failure roundrobin FCF | 
|  | * failover when a new FCF event happened. If the FCF read back is | 
|  | * valid/available and it passes the connection list check, it updates | 
|  | * the bmask for the eligible FCF record for roundrobin failover. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct fcf_record *new_fcf_record; | 
|  | uint32_t boot_flag, addr_mode; | 
|  | uint16_t fcf_index, next_fcf_index; | 
|  | uint16_t vlan_id; | 
|  | int rc; | 
|  |  | 
|  | /* If link state is not up, no need to proceed */ | 
|  | if (phba->link_state < LPFC_LINK_UP) | 
|  | goto out; | 
|  |  | 
|  | /* If FCF discovery period is over, no need to proceed */ | 
|  | if (!(phba->fcf.fcf_flag & FCF_DISCOVERY)) | 
|  | goto out; | 
|  |  | 
|  | /* Parse the FCF record from the non-embedded mailbox command */ | 
|  | new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
|  | &next_fcf_index); | 
|  | if (!new_fcf_record) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
|  | "2767 Mailbox command READ_FCF_RECORD " | 
|  | "failed to retrieve a FCF record.\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Check the connection list for eligibility */ | 
|  | rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
|  | &addr_mode, &vlan_id); | 
|  |  | 
|  | /* Log the FCF record information if turned on */ | 
|  | lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
|  | next_fcf_index); | 
|  |  | 
|  | if (!rc) | 
|  | goto out; | 
|  |  | 
|  | /* Update the eligible FCF record index bmask */ | 
|  | fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
|  |  | 
|  | rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record); | 
|  |  | 
|  | out: | 
|  | lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox data structure. | 
|  | * | 
|  | * This function handles completion of init vfi mailbox command. | 
|  | */ | 
|  | void | 
|  | lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  |  | 
|  | /* | 
|  | * VFI not supported on interface type 0, just do the flogi | 
|  | * Also continue if the VFI is in use - just use the same one. | 
|  | */ | 
|  | if (mboxq->u.mb.mbxStatus && | 
|  | (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | 
|  | LPFC_SLI_INTF_IF_TYPE_0) && | 
|  | mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, | 
|  | "2891 Init VFI mailbox failed 0x%x\n", | 
|  | mboxq->u.mb.mbxStatus); | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | return; | 
|  | } | 
|  |  | 
|  | lpfc_initial_flogi(vport); | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_issue_init_vfi - Issue init_vfi mailbox command. | 
|  | * @vport: pointer to lpfc_vport data structure. | 
|  | * | 
|  | * This function issue a init_vfi mailbox command to initialize the VFI and | 
|  | * VPI for the physical port. | 
|  | */ | 
|  | void | 
|  | lpfc_issue_init_vfi(struct lpfc_vport *vport) | 
|  | { | 
|  | LPFC_MBOXQ_t *mboxq; | 
|  | int rc; | 
|  | struct lpfc_hba *phba = vport->phba; | 
|  |  | 
|  | mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!mboxq) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, "2892 Failed to allocate " | 
|  | "init_vfi mailbox\n"); | 
|  | return; | 
|  | } | 
|  | lpfc_init_vfi(mboxq, vport); | 
|  | mboxq->mbox_cmpl = lpfc_init_vfi_cmpl; | 
|  | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n"); | 
|  | mempool_free(mboxq, vport->phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @mboxq: pointer to mailbox data structure. | 
|  | * | 
|  | * This function handles completion of init vpi mailbox command. | 
|  | */ | 
|  | void | 
|  | lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  | struct lpfc_nodelist *ndlp; | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | if (mboxq->u.mb.mbxStatus) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, | 
|  | "2609 Init VPI mailbox failed 0x%x\n", | 
|  | mboxq->u.mb.mbxStatus); | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | return; | 
|  | } | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | /* If this port is physical port or FDISC is done, do reg_vpi */ | 
|  | if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) { | 
|  | ndlp = lpfc_findnode_did(vport, Fabric_DID); | 
|  | if (!ndlp) | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_DISCOVERY, | 
|  | "2731 Cannot find fabric " | 
|  | "controller node\n"); | 
|  | else | 
|  | lpfc_register_new_vport(phba, vport, ndlp); | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) | 
|  | lpfc_initial_fdisc(vport); | 
|  | else { | 
|  | lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, | 
|  | "2606 No NPIV Fabric support\n"); | 
|  | } | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_issue_init_vpi - Issue init_vpi mailbox command. | 
|  | * @vport: pointer to lpfc_vport data structure. | 
|  | * | 
|  | * This function issue a init_vpi mailbox command to initialize | 
|  | * VPI for the vport. | 
|  | */ | 
|  | void | 
|  | lpfc_issue_init_vpi(struct lpfc_vport *vport) | 
|  | { | 
|  | LPFC_MBOXQ_t *mboxq; | 
|  | int rc; | 
|  |  | 
|  | mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!mboxq) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, "2607 Failed to allocate " | 
|  | "init_vpi mailbox\n"); | 
|  | return; | 
|  | } | 
|  | lpfc_init_vpi(vport->phba, mboxq, vport->vpi); | 
|  | mboxq->vport = vport; | 
|  | mboxq->mbox_cmpl = lpfc_init_vpi_cmpl; | 
|  | rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, | 
|  | LOG_MBOX, "2608 Failed to issue init_vpi mailbox\n"); | 
|  | mempool_free(mboxq, vport->phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_start_fdiscs - send fdiscs for each vports on this port. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * | 
|  | * This function loops through the list of vports on the @phba and issues an | 
|  | * FDISC if possible. | 
|  | */ | 
|  | void | 
|  | lpfc_start_fdiscs(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport **vports; | 
|  | int i; | 
|  |  | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (vports != NULL) { | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
|  | if (vports[i]->port_type == LPFC_PHYSICAL_PORT) | 
|  | continue; | 
|  | /* There are no vpi for this vport */ | 
|  | if (vports[i]->vpi > phba->max_vpi) { | 
|  | lpfc_vport_set_state(vports[i], | 
|  | FC_VPORT_FAILED); | 
|  | continue; | 
|  | } | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
|  | lpfc_vport_set_state(vports[i], | 
|  | FC_VPORT_LINKDOWN); | 
|  | continue; | 
|  | } | 
|  | if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) { | 
|  | lpfc_issue_init_vpi(vports[i]); | 
|  | continue; | 
|  | } | 
|  | if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) | 
|  | lpfc_initial_fdisc(vports[i]); | 
|  | else { | 
|  | lpfc_vport_set_state(vports[i], | 
|  | FC_VPORT_NO_FABRIC_SUPP); | 
|  | lpfc_printf_vlog(vports[i], KERN_ERR, | 
|  | LOG_ELS, | 
|  | "0259 No NPIV " | 
|  | "Fabric support\n"); | 
|  | } | 
|  | } | 
|  | } | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_dmabuf *dmabuf = mboxq->context1; | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | /* | 
|  | * VFI not supported for interface type 0, so ignore any mailbox | 
|  | * error (except VFI in use) and continue with the discovery. | 
|  | */ | 
|  | if (mboxq->u.mb.mbxStatus && | 
|  | (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | 
|  | LPFC_SLI_INTF_IF_TYPE_0) && | 
|  | mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "2018 REG_VFI mbxStatus error x%x " | 
|  | "HBA state x%x\n", | 
|  | mboxq->u.mb.mbxStatus, vport->port_state); | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
|  | /* FLOGI failed, use loop map to make discovery list */ | 
|  | lpfc_disc_list_loopmap(vport); | 
|  | /* Start discovery */ | 
|  | lpfc_disc_start(vport); | 
|  | goto out_free_mem; | 
|  | } | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | goto out_free_mem; | 
|  | } | 
|  | /* The VPI is implicitly registered when the VFI is registered */ | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->vpi_state |= LPFC_VPI_REGISTERED; | 
|  | vport->fc_flag |= FC_VFI_REGISTERED; | 
|  | vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; | 
|  | vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | /* In case SLI4 FC loopback test, we are ready */ | 
|  | if ((phba->sli_rev == LPFC_SLI_REV4) && | 
|  | (phba->link_flag & LS_LOOPBACK_MODE)) { | 
|  | phba->link_state = LPFC_HBA_READY; | 
|  | goto out_free_mem; | 
|  | } | 
|  |  | 
|  | if (vport->port_state == LPFC_FABRIC_CFG_LINK) { | 
|  | /* For private loop just start discovery and we are done. */ | 
|  | if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && | 
|  | !(vport->fc_flag & FC_PUBLIC_LOOP)) { | 
|  | /* Use loop map to make discovery list */ | 
|  | lpfc_disc_list_loopmap(vport); | 
|  | /* Start discovery */ | 
|  | lpfc_disc_start(vport); | 
|  | } else { | 
|  | lpfc_start_fdiscs(phba); | 
|  | lpfc_do_scr_ns_plogi(phba, vport); | 
|  | } | 
|  | } | 
|  |  | 
|  | out_free_mem: | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys); | 
|  | kfree(dmabuf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1; | 
|  | struct lpfc_vport  *vport = pmb->vport; | 
|  |  | 
|  |  | 
|  | /* Check for error */ | 
|  | if (mb->mbxStatus) { | 
|  | /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "0319 READ_SPARAM mbxStatus error x%x " | 
|  | "hba state x%x>\n", | 
|  | mb->mbxStatus, vport->port_state); | 
|  | lpfc_linkdown(phba); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, | 
|  | sizeof (struct serv_parm)); | 
|  | lpfc_update_vport_wwn(vport); | 
|  | if (vport->port_type == LPFC_PHYSICAL_PORT) { | 
|  | memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); | 
|  | memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); | 
|  | } | 
|  |  | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  |  | 
|  | out: | 
|  | pmb->context1 = NULL; | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) | 
|  | { | 
|  | struct lpfc_vport *vport = phba->pport; | 
|  | LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL; | 
|  | struct Scsi_Host *shost; | 
|  | int i; | 
|  | struct lpfc_dmabuf *mp; | 
|  | int rc; | 
|  | struct fcf_record *fcf_record; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | switch (bf_get(lpfc_mbx_read_top_link_spd, la)) { | 
|  | case LPFC_LINK_SPEED_1GHZ: | 
|  | case LPFC_LINK_SPEED_2GHZ: | 
|  | case LPFC_LINK_SPEED_4GHZ: | 
|  | case LPFC_LINK_SPEED_8GHZ: | 
|  | case LPFC_LINK_SPEED_10GHZ: | 
|  | case LPFC_LINK_SPEED_16GHZ: | 
|  | phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la); | 
|  | break; | 
|  | default: | 
|  | phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN; | 
|  | break; | 
|  | } | 
|  |  | 
|  | phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la); | 
|  | phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED; | 
|  |  | 
|  | shost = lpfc_shost_from_vport(vport); | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
|  | phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED; | 
|  |  | 
|  | /* if npiv is enabled and this adapter supports npiv log | 
|  | * a message that npiv is not supported in this topology | 
|  | */ | 
|  | if (phba->cfg_enable_npiv && phba->max_vpi) | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1309 Link Up Event npiv not supported in loop " | 
|  | "topology\n"); | 
|  | /* Get Loop Map information */ | 
|  | if (bf_get(lpfc_mbx_read_top_il, la)) { | 
|  | spin_lock(shost->host_lock); | 
|  | vport->fc_flag |= FC_LBIT; | 
|  | spin_unlock(shost->host_lock); | 
|  | } | 
|  |  | 
|  | vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la); | 
|  | i = la->lilpBde64.tus.f.bdeSize; | 
|  |  | 
|  | if (i == 0) { | 
|  | phba->alpa_map[0] = 0; | 
|  | } else { | 
|  | if (vport->cfg_log_verbose & LOG_LINK_EVENT) { | 
|  | int numalpa, j, k; | 
|  | union { | 
|  | uint8_t pamap[16]; | 
|  | struct { | 
|  | uint32_t wd1; | 
|  | uint32_t wd2; | 
|  | uint32_t wd3; | 
|  | uint32_t wd4; | 
|  | } pa; | 
|  | } un; | 
|  | numalpa = phba->alpa_map[0]; | 
|  | j = 0; | 
|  | while (j < numalpa) { | 
|  | memset(un.pamap, 0, 16); | 
|  | for (k = 1; j < numalpa; k++) { | 
|  | un.pamap[k - 1] = | 
|  | phba->alpa_map[j + 1]; | 
|  | j++; | 
|  | if (k == 16) | 
|  | break; | 
|  | } | 
|  | /* Link Up Event ALPA map */ | 
|  | lpfc_printf_log(phba, | 
|  | KERN_WARNING, | 
|  | LOG_LINK_EVENT, | 
|  | "1304 Link Up Event " | 
|  | "ALPA map Data: x%x " | 
|  | "x%x x%x x%x\n", | 
|  | un.pa.wd1, un.pa.wd2, | 
|  | un.pa.wd3, un.pa.wd4); | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { | 
|  | if (phba->max_vpi && phba->cfg_enable_npiv && | 
|  | (phba->sli_rev >= LPFC_SLI_REV3)) | 
|  | phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; | 
|  | } | 
|  | vport->fc_myDID = phba->fc_pref_DID; | 
|  | spin_lock(shost->host_lock); | 
|  | vport->fc_flag |= FC_LBIT; | 
|  | spin_unlock(shost->host_lock); | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | lpfc_linkup(phba); | 
|  | sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!sparam_mbox) | 
|  | goto out; | 
|  |  | 
|  | rc = lpfc_read_sparam(phba, sparam_mbox, 0); | 
|  | if (rc) { | 
|  | mempool_free(sparam_mbox, phba->mbox_mem_pool); | 
|  | goto out; | 
|  | } | 
|  | sparam_mbox->vport = vport; | 
|  | sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; | 
|  | rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | mp = (struct lpfc_dmabuf *) sparam_mbox->context1; | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(sparam_mbox, phba->mbox_mem_pool); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!(phba->hba_flag & HBA_FCOE_MODE)) { | 
|  | cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!cfglink_mbox) | 
|  | goto out; | 
|  | vport->port_state = LPFC_LOCAL_CFG_LINK; | 
|  | lpfc_config_link(phba, cfglink_mbox); | 
|  | cfglink_mbox->vport = vport; | 
|  | cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link; | 
|  | rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | mempool_free(cfglink_mbox, phba->mbox_mem_pool); | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | vport->port_state = LPFC_VPORT_UNKNOWN; | 
|  | /* | 
|  | * Add the driver's default FCF record at FCF index 0 now. This | 
|  | * is phase 1 implementation that support FCF index 0 and driver | 
|  | * defaults. | 
|  | */ | 
|  | if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { | 
|  | fcf_record = kzalloc(sizeof(struct fcf_record), | 
|  | GFP_KERNEL); | 
|  | if (unlikely(!fcf_record)) { | 
|  | lpfc_printf_log(phba, KERN_ERR, | 
|  | LOG_MBOX | LOG_SLI, | 
|  | "2554 Could not allocate memory for " | 
|  | "fcf record\n"); | 
|  | rc = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | lpfc_sli4_build_dflt_fcf_record(phba, fcf_record, | 
|  | LPFC_FCOE_FCF_DEF_INDEX); | 
|  | rc = lpfc_sli4_add_fcf_record(phba, fcf_record); | 
|  | if (unlikely(rc)) { | 
|  | lpfc_printf_log(phba, KERN_ERR, | 
|  | LOG_MBOX | LOG_SLI, | 
|  | "2013 Could not manually add FCF " | 
|  | "record 0, status %d\n", rc); | 
|  | rc = -ENODEV; | 
|  | kfree(fcf_record); | 
|  | goto out; | 
|  | } | 
|  | kfree(fcf_record); | 
|  | } | 
|  | /* | 
|  | * The driver is expected to do FIP/FCF. Call the port | 
|  | * and get the FCF Table. | 
|  | */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (phba->hba_flag & FCF_TS_INPROG) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  | /* This is the initial FCF discovery scan */ | 
|  | phba->fcf.fcf_flag |= FCF_INIT_DISC; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
|  | "2778 Start FCF table scan at linkup\n"); | 
|  | rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
|  | LPFC_FCOE_FCF_GET_FIRST); | 
|  | if (rc) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_INIT_DISC; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | goto out; | 
|  | } | 
|  | /* Reset FCF roundrobin bmask for new discovery */ | 
|  | lpfc_sli4_clear_fcf_rr_bmask(phba); | 
|  | } | 
|  |  | 
|  | return; | 
|  | out: | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "0263 Discovery Mailbox error: state: 0x%x : %p %p\n", | 
|  | vport->port_state, sparam_mbox, cfglink_mbox); | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_enable_la(struct lpfc_hba *phba) | 
|  | { | 
|  | uint32_t control; | 
|  | struct lpfc_sli *psli = &phba->sli; | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | psli->sli_flag |= LPFC_PROCESS_LA; | 
|  | if (phba->sli_rev <= LPFC_SLI_REV3) { | 
|  | control = readl(phba->HCregaddr); | 
|  | control |= HC_LAINT_ENA; | 
|  | writel(control, phba->HCregaddr); | 
|  | readl(phba->HCregaddr); /* flush */ | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_issue_link_down(struct lpfc_hba *phba) | 
|  | { | 
|  | lpfc_linkdown(phba); | 
|  | lpfc_enable_la(phba); | 
|  | lpfc_unregister_unused_fcf(phba); | 
|  | /* turn on Link Attention interrupts - no CLEAR_LA needed */ | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a READ_TOPOLOGY mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_mbx_read_top *la; | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); | 
|  |  | 
|  | /* Unblock ELS traffic */ | 
|  | phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | /* Check for error */ | 
|  | if (mb->mbxStatus) { | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, | 
|  | "1307 READ_LA mbox error x%x state x%x\n", | 
|  | mb->mbxStatus, vport->port_state); | 
|  | lpfc_mbx_issue_link_down(phba); | 
|  | phba->link_state = LPFC_HBA_ERROR; | 
|  | goto lpfc_mbx_cmpl_read_topology_free_mbuf; | 
|  | } | 
|  |  | 
|  | la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop; | 
|  |  | 
|  | memcpy(&phba->alpa_map[0], mp->virt, 128); | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | if (bf_get(lpfc_mbx_read_top_pb, la)) | 
|  | vport->fc_flag |= FC_BYPASSED_MODE; | 
|  | else | 
|  | vport->fc_flag &= ~FC_BYPASSED_MODE; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | if ((phba->fc_eventTag  < la->eventTag) || | 
|  | (phba->fc_eventTag == la->eventTag)) { | 
|  | phba->fc_stat.LinkMultiEvent++; | 
|  | if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) | 
|  | if (phba->fc_eventTag != 0) | 
|  | lpfc_linkdown(phba); | 
|  | } | 
|  |  | 
|  | phba->fc_eventTag = la->eventTag; | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (bf_get(lpfc_mbx_read_top_mm, la)) | 
|  | phba->sli.sli_flag |= LPFC_MENLO_MAINT; | 
|  | else | 
|  | phba->sli.sli_flag &= ~LPFC_MENLO_MAINT; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | phba->link_events++; | 
|  | if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) && | 
|  | (!bf_get(lpfc_mbx_read_top_mm, la))) { | 
|  | phba->fc_stat.LinkUp++; | 
|  | if (phba->link_flag & LS_LOOPBACK_MODE) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1306 Link Up Event in loop back mode " | 
|  | "x%x received Data: x%x x%x x%x x%x\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | bf_get(lpfc_mbx_read_top_alpa_granted, | 
|  | la), | 
|  | bf_get(lpfc_mbx_read_top_link_spd, la), | 
|  | phba->alpa_map[0]); | 
|  | } else { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1303 Link Up Event x%x received " | 
|  | "Data: x%x x%x x%x x%x x%x x%x %d\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | bf_get(lpfc_mbx_read_top_alpa_granted, | 
|  | la), | 
|  | bf_get(lpfc_mbx_read_top_link_spd, la), | 
|  | phba->alpa_map[0], | 
|  | bf_get(lpfc_mbx_read_top_mm, la), | 
|  | bf_get(lpfc_mbx_read_top_fa, la), | 
|  | phba->wait_4_mlo_maint_flg); | 
|  | } | 
|  | lpfc_mbx_process_link_up(phba, la); | 
|  | } else if (bf_get(lpfc_mbx_read_top_att_type, la) == | 
|  | LPFC_ATT_LINK_DOWN) { | 
|  | phba->fc_stat.LinkDown++; | 
|  | if (phba->link_flag & LS_LOOPBACK_MODE) | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1308 Link Down Event in loop back mode " | 
|  | "x%x received " | 
|  | "Data: x%x x%x x%x\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | phba->pport->port_state, vport->fc_flag); | 
|  | else | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1305 Link Down Event x%x received " | 
|  | "Data: x%x x%x x%x x%x x%x\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | phba->pport->port_state, vport->fc_flag, | 
|  | bf_get(lpfc_mbx_read_top_mm, la), | 
|  | bf_get(lpfc_mbx_read_top_fa, la)); | 
|  | lpfc_mbx_issue_link_down(phba); | 
|  | } | 
|  | if ((bf_get(lpfc_mbx_read_top_mm, la)) && | 
|  | (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)) { | 
|  | if (phba->link_state != LPFC_LINK_DOWN) { | 
|  | phba->fc_stat.LinkDown++; | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1312 Link Down Event x%x received " | 
|  | "Data: x%x x%x x%x\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | phba->pport->port_state, vport->fc_flag); | 
|  | lpfc_mbx_issue_link_down(phba); | 
|  | } else | 
|  | lpfc_enable_la(phba); | 
|  |  | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
|  | "1310 Menlo Maint Mode Link up Event x%x rcvd " | 
|  | "Data: x%x x%x x%x\n", | 
|  | la->eventTag, phba->fc_eventTag, | 
|  | phba->pport->port_state, vport->fc_flag); | 
|  | /* | 
|  | * The cmnd that triggered this will be waiting for this | 
|  | * signal. | 
|  | */ | 
|  | /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */ | 
|  | if (phba->wait_4_mlo_maint_flg) { | 
|  | phba->wait_4_mlo_maint_flg = 0; | 
|  | wake_up_interruptible(&phba->wait_4_mlo_m_q); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bf_get(lpfc_mbx_read_top_fa, la)) { | 
|  | if (bf_get(lpfc_mbx_read_top_mm, la)) | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, | 
|  | "1311 fa %d\n", | 
|  | bf_get(lpfc_mbx_read_top_fa, la)); | 
|  | } | 
|  |  | 
|  | lpfc_mbx_cmpl_read_topology_free_mbuf: | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a REG_LOGIN mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport  *vport = pmb->vport; | 
|  | struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); | 
|  | struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | pmb->context1 = NULL; | 
|  | pmb->context2 = NULL; | 
|  |  | 
|  | if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) | 
|  | ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; | 
|  |  | 
|  | if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL || | 
|  | ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) { | 
|  | /* We rcvd a rscn after issuing this | 
|  | * mbox reg login, we may have cycled | 
|  | * back through the state and be | 
|  | * back at reg login state so this | 
|  | * mbox needs to be ignored becase | 
|  | * there is another reg login in | 
|  | * process. | 
|  | */ | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } else | 
|  | /* Good status, call state machine */ | 
|  | lpfc_disc_state_machine(vport, ndlp, pmb, | 
|  | NLP_EVT_CMPL_REG_LOGIN); | 
|  |  | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | /* decrement the node reference count held for this callback | 
|  | * function. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | switch (mb->mbxStatus) { | 
|  | case 0x0011: | 
|  | case 0x0020: | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0911 cmpl_unreg_vpi, mb status = 0x%x\n", | 
|  | mb->mbxStatus); | 
|  | break; | 
|  | /* If VPI is busy, reset the HBA */ | 
|  | case 0x9700: | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, | 
|  | "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n", | 
|  | vport->vpi, mb->mbxStatus); | 
|  | if (!(phba->pport->load_flag & FC_UNLOADING)) | 
|  | lpfc_workq_post_event(phba, NULL, NULL, | 
|  | LPFC_EVT_RESET_HBA); | 
|  | } | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->vpi_state &= ~LPFC_VPI_REGISTERED; | 
|  | vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | vport->unreg_vpi_cmpl = VPORT_OK; | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | lpfc_cleanup_vports_rrqs(vport, NULL); | 
|  | /* | 
|  | * This shost reference might have been taken at the beginning of | 
|  | * lpfc_vport_delete() | 
|  | */ | 
|  | if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport)) | 
|  | scsi_host_put(shost); | 
|  | } | 
|  |  | 
|  | int | 
|  | lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | LPFC_MBOXQ_t *mbox; | 
|  | int rc; | 
|  |  | 
|  | mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!mbox) | 
|  | return 1; | 
|  |  | 
|  | lpfc_unreg_vpi(phba, vport->vpi, mbox); | 
|  | mbox->vport = vport; | 
|  | mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi; | 
|  | rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, | 
|  | "1800 Could not issue unreg_vpi\n"); | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  | vport->unreg_vpi_cmpl = VPORT_ERROR; | 
|  | return rc; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  | struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  |  | 
|  | switch (mb->mbxStatus) { | 
|  | case 0x0011: | 
|  | case 0x9601: | 
|  | case 0x9602: | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0912 cmpl_reg_vpi, mb status = 0x%x\n", | 
|  | mb->mbxStatus); | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | vport->fc_myDID = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->vpi_state |= LPFC_VPI_REGISTERED; | 
|  | vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | vport->num_disc_nodes = 0; | 
|  | /* go thru NPR list and issue ELS PLOGIs */ | 
|  | if (vport->fc_npr_cnt) | 
|  | lpfc_els_disc_plogi(vport); | 
|  |  | 
|  | if (!vport->num_disc_nodes) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_NDISC_ACTIVE; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_can_disctmo(vport); | 
|  | } | 
|  | vport->port_state = LPFC_VPORT_READY; | 
|  |  | 
|  | out: | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_create_static_vport - Read HBA config region to create static vports. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * | 
|  | * This routine issue a DUMP mailbox command for config region 22 to get | 
|  | * the list of static vports to be created. The function create vports | 
|  | * based on the information returned from the HBA. | 
|  | **/ | 
|  | void | 
|  | lpfc_create_static_vport(struct lpfc_hba *phba) | 
|  | { | 
|  | LPFC_MBOXQ_t *pmb = NULL; | 
|  | MAILBOX_t *mb; | 
|  | struct static_vport_info *vport_info; | 
|  | int rc = 0, i; | 
|  | struct fc_vport_identifiers vport_id; | 
|  | struct fc_vport *new_fc_vport; | 
|  | struct Scsi_Host *shost; | 
|  | struct lpfc_vport *vport; | 
|  | uint16_t offset = 0; | 
|  | uint8_t *vport_buff; | 
|  | struct lpfc_dmabuf *mp; | 
|  | uint32_t byte_count = 0; | 
|  |  | 
|  | pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!pmb) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "0542 lpfc_create_static_vport failed to" | 
|  | " allocate mailbox memory\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mb = &pmb->u.mb; | 
|  |  | 
|  | vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL); | 
|  | if (!vport_info) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "0543 lpfc_create_static_vport failed to" | 
|  | " allocate vport_info\n"); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | vport_buff = (uint8_t *) vport_info; | 
|  | do { | 
|  | if (lpfc_dump_static_vport(phba, pmb, offset)) | 
|  | goto out; | 
|  |  | 
|  | pmb->vport = phba->pport; | 
|  | rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO); | 
|  |  | 
|  | if ((rc != MBX_SUCCESS) || mb->mbxStatus) { | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, | 
|  | "0544 lpfc_create_static_vport failed to" | 
|  | " issue dump mailbox command ret 0x%x " | 
|  | "status 0x%x\n", | 
|  | rc, mb->mbxStatus); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) { | 
|  | byte_count = pmb->u.mqe.un.mb_words[5]; | 
|  | mp = (struct lpfc_dmabuf *) pmb->context2; | 
|  | if (byte_count > sizeof(struct static_vport_info) - | 
|  | offset) | 
|  | byte_count = sizeof(struct static_vport_info) | 
|  | - offset; | 
|  | memcpy(vport_buff + offset, mp->virt, byte_count); | 
|  | offset += byte_count; | 
|  | } else { | 
|  | if (mb->un.varDmp.word_cnt > | 
|  | sizeof(struct static_vport_info) - offset) | 
|  | mb->un.varDmp.word_cnt = | 
|  | sizeof(struct static_vport_info) | 
|  | - offset; | 
|  | byte_count = mb->un.varDmp.word_cnt; | 
|  | lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, | 
|  | vport_buff + offset, | 
|  | byte_count); | 
|  |  | 
|  | offset += byte_count; | 
|  | } | 
|  |  | 
|  | } while (byte_count && | 
|  | offset < sizeof(struct static_vport_info)); | 
|  |  | 
|  |  | 
|  | if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) || | 
|  | ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK) | 
|  | != VPORT_INFO_REV)) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "0545 lpfc_create_static_vport bad" | 
|  | " information header 0x%x 0x%x\n", | 
|  | le32_to_cpu(vport_info->signature), | 
|  | le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK); | 
|  |  | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | shost = lpfc_shost_from_vport(phba->pport); | 
|  |  | 
|  | for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) { | 
|  | memset(&vport_id, 0, sizeof(vport_id)); | 
|  | vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn); | 
|  | vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn); | 
|  | if (!vport_id.port_name || !vport_id.node_name) | 
|  | continue; | 
|  |  | 
|  | vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR; | 
|  | vport_id.vport_type = FC_PORTTYPE_NPIV; | 
|  | vport_id.disable = false; | 
|  | new_fc_vport = fc_vport_create(shost, 0, &vport_id); | 
|  |  | 
|  | if (!new_fc_vport) { | 
|  | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, | 
|  | "0546 lpfc_create_static_vport failed to" | 
|  | " create vport\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | vport = *(struct lpfc_vport **)new_fc_vport->dd_data; | 
|  | vport->vport_flag |= STATIC_VPORT; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(vport_info); | 
|  | if (rc != MBX_TIMEOUT) { | 
|  | if (pmb->context2) { | 
|  | mp = (struct lpfc_dmabuf *) pmb->context2; | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | } | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a Fabric REG_LOGIN mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); | 
|  | struct lpfc_nodelist *ndlp; | 
|  | struct Scsi_Host *shost; | 
|  |  | 
|  | ndlp = (struct lpfc_nodelist *) pmb->context2; | 
|  | pmb->context1 = NULL; | 
|  | pmb->context2 = NULL; | 
|  |  | 
|  | if (mb->mbxStatus) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, | 
|  | "0258 Register Fabric login error: 0x%x\n", | 
|  | mb->mbxStatus); | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
|  | /* FLOGI failed, use loop map to make discovery list */ | 
|  | lpfc_disc_list_loopmap(vport); | 
|  |  | 
|  | /* Start discovery */ | 
|  | lpfc_disc_start(vport); | 
|  | /* Decrement the reference count to ndlp after the | 
|  | * reference to the ndlp are done. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | /* Decrement the reference count to ndlp after the reference | 
|  | * to the ndlp are done. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (phba->sli_rev < LPFC_SLI_REV4) | 
|  | ndlp->nlp_rpi = mb->un.varWords[0]; | 
|  | ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
|  | ndlp->nlp_type |= NLP_FABRIC; | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
|  |  | 
|  | if (vport->port_state == LPFC_FABRIC_CFG_LINK) { | 
|  | /* when physical port receive logo donot start | 
|  | * vport discovery */ | 
|  | if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG)) | 
|  | lpfc_start_fdiscs(phba); | 
|  | else { | 
|  | shost = lpfc_shost_from_vport(vport); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | lpfc_do_scr_ns_plogi(phba, vport); | 
|  | } | 
|  |  | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | /* Drop the reference count from the mbox at the end after | 
|  | * all the current reference to the ndlp have been done. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a NameServer REG_LOGIN mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); | 
|  | struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; | 
|  | struct lpfc_vport *vport = pmb->vport; | 
|  |  | 
|  | pmb->context1 = NULL; | 
|  | pmb->context2 = NULL; | 
|  |  | 
|  | if (mb->mbxStatus) { | 
|  | out: | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, | 
|  | "0260 Register NameServer error: 0x%x\n", | 
|  | mb->mbxStatus); | 
|  | /* decrement the node reference count held for this | 
|  | * callback function. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | /* If no other thread is using the ndlp, free it */ | 
|  | lpfc_nlp_not_used(ndlp); | 
|  |  | 
|  | if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
|  | /* | 
|  | * RegLogin failed, use loop map to make discovery | 
|  | * list | 
|  | */ | 
|  | lpfc_disc_list_loopmap(vport); | 
|  |  | 
|  | /* Start discovery */ | 
|  | lpfc_disc_start(vport); | 
|  | return; | 
|  | } | 
|  | lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (phba->sli_rev < LPFC_SLI_REV4) | 
|  | ndlp->nlp_rpi = mb->un.varWords[0]; | 
|  | ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
|  | ndlp->nlp_type |= NLP_FABRIC; | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
|  |  | 
|  | if (vport->port_state < LPFC_VPORT_READY) { | 
|  | /* Link up discovery requires Fabric registration. */ | 
|  | lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, 0); /* Do this first! */ | 
|  | lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0); | 
|  | lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0); | 
|  | lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); | 
|  | lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0); | 
|  |  | 
|  | /* Issue SCR just before NameServer GID_FT Query */ | 
|  | lpfc_issue_els_scr(vport, SCR_DID, 0); | 
|  | } | 
|  |  | 
|  | vport->fc_ns_retry = 0; | 
|  | /* Good status, issue CT Request to NameServer */ | 
|  | if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, 0)) { | 
|  | /* Cannot issue NameServer Query, so finish up discovery */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* decrement the node reference count held for this | 
|  | * callback function. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct fc_rport  *rport; | 
|  | struct lpfc_rport_data *rdata; | 
|  | struct fc_rport_identifiers rport_ids; | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  |  | 
|  | /* Remote port has reappeared. Re-register w/ FC transport */ | 
|  | rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); | 
|  | rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); | 
|  | rport_ids.port_id = ndlp->nlp_DID; | 
|  | rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; | 
|  |  | 
|  | /* | 
|  | * We leave our node pointer in rport->dd_data when we unregister a | 
|  | * FCP target port.  But fc_remote_port_add zeros the space to which | 
|  | * rport->dd_data points.  So, if we're reusing a previously | 
|  | * registered port, drop the reference that we took the last time we | 
|  | * registered the port. | 
|  | */ | 
|  | if (ndlp->rport && ndlp->rport->dd_data && | 
|  | ((struct lpfc_rport_data *) ndlp->rport->dd_data)->pnode == ndlp) | 
|  | lpfc_nlp_put(ndlp); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
|  | "rport add:       did:x%x flg:x%x type x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
|  |  | 
|  | /* Don't add the remote port if unloading. */ | 
|  | if (vport->load_flag & FC_UNLOADING) | 
|  | return; | 
|  |  | 
|  | ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids); | 
|  | if (!rport || !get_device(&rport->dev)) { | 
|  | dev_printk(KERN_WARNING, &phba->pcidev->dev, | 
|  | "Warning: fc_remote_port_add failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* initialize static port data */ | 
|  | rport->maxframe_size = ndlp->nlp_maxframe; | 
|  | rport->supported_classes = ndlp->nlp_class_sup; | 
|  | rdata = rport->dd_data; | 
|  | rdata->pnode = lpfc_nlp_get(ndlp); | 
|  |  | 
|  | if (ndlp->nlp_type & NLP_FCP_TARGET) | 
|  | rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; | 
|  | if (ndlp->nlp_type & NLP_FCP_INITIATOR) | 
|  | rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; | 
|  |  | 
|  | if (rport_ids.roles !=  FC_RPORT_ROLE_UNKNOWN) | 
|  | fc_remote_port_rolechg(rport, rport_ids.roles); | 
|  |  | 
|  | if ((rport->scsi_target_id != -1) && | 
|  | (rport->scsi_target_id < LPFC_MAX_TARGET)) { | 
|  | ndlp->nlp_sid = rport->scsi_target_id; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct fc_rport *rport = ndlp->rport; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, | 
|  | "rport delete:    did:x%x flg:x%x type x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
|  |  | 
|  | fc_remote_port_delete(rport); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | switch (state) { | 
|  | case NLP_STE_UNUSED_NODE: | 
|  | vport->fc_unused_cnt += count; | 
|  | break; | 
|  | case NLP_STE_PLOGI_ISSUE: | 
|  | vport->fc_plogi_cnt += count; | 
|  | break; | 
|  | case NLP_STE_ADISC_ISSUE: | 
|  | vport->fc_adisc_cnt += count; | 
|  | break; | 
|  | case NLP_STE_REG_LOGIN_ISSUE: | 
|  | vport->fc_reglogin_cnt += count; | 
|  | break; | 
|  | case NLP_STE_PRLI_ISSUE: | 
|  | vport->fc_prli_cnt += count; | 
|  | break; | 
|  | case NLP_STE_UNMAPPED_NODE: | 
|  | vport->fc_unmap_cnt += count; | 
|  | break; | 
|  | case NLP_STE_MAPPED_NODE: | 
|  | vport->fc_map_cnt += count; | 
|  | break; | 
|  | case NLP_STE_NPR_NODE: | 
|  | vport->fc_npr_cnt += count; | 
|  | break; | 
|  | } | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | int old_state, int new_state) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | if (new_state == NLP_STE_UNMAPPED_NODE) { | 
|  | ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; | 
|  | ndlp->nlp_type |= NLP_FC_NODE; | 
|  | } | 
|  | if (new_state == NLP_STE_MAPPED_NODE) | 
|  | ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; | 
|  | if (new_state == NLP_STE_NPR_NODE) | 
|  | ndlp->nlp_flag &= ~NLP_RCV_PLOGI; | 
|  |  | 
|  | /* Transport interface */ | 
|  | if (ndlp->rport && (old_state == NLP_STE_MAPPED_NODE || | 
|  | old_state == NLP_STE_UNMAPPED_NODE)) { | 
|  | vport->phba->nport_event_cnt++; | 
|  | lpfc_unregister_remote_port(ndlp); | 
|  | } | 
|  |  | 
|  | if (new_state ==  NLP_STE_MAPPED_NODE || | 
|  | new_state == NLP_STE_UNMAPPED_NODE) { | 
|  | vport->phba->nport_event_cnt++; | 
|  | /* | 
|  | * Tell the fc transport about the port, if we haven't | 
|  | * already. If we have, and it's a scsi entity, be | 
|  | * sure to unblock any attached scsi devices | 
|  | */ | 
|  | lpfc_register_remote_port(vport, ndlp); | 
|  | } | 
|  | if ((new_state ==  NLP_STE_MAPPED_NODE) && | 
|  | (vport->stat_data_enabled)) { | 
|  | /* | 
|  | * A new target is discovered, if there is no buffer for | 
|  | * statistical data collection allocate buffer. | 
|  | */ | 
|  | ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, | 
|  | sizeof(struct lpfc_scsicmd_bkt), | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (!ndlp->lat_data) | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, | 
|  | "0286 lpfc_nlp_state_cleanup failed to " | 
|  | "allocate statistical data buffer DID " | 
|  | "0x%x\n", ndlp->nlp_DID); | 
|  | } | 
|  | /* | 
|  | * if we added to Mapped list, but the remote port | 
|  | * registration failed or assigned a target id outside | 
|  | * our presentable range - move the node to the | 
|  | * Unmapped List | 
|  | */ | 
|  | if (new_state == NLP_STE_MAPPED_NODE && | 
|  | (!ndlp->rport || | 
|  | ndlp->rport->scsi_target_id == -1 || | 
|  | ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag |= NLP_TGT_NO_SCSIID; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
|  | } | 
|  | } | 
|  |  | 
|  | static char * | 
|  | lpfc_nlp_state_name(char *buffer, size_t size, int state) | 
|  | { | 
|  | static char *states[] = { | 
|  | [NLP_STE_UNUSED_NODE] = "UNUSED", | 
|  | [NLP_STE_PLOGI_ISSUE] = "PLOGI", | 
|  | [NLP_STE_ADISC_ISSUE] = "ADISC", | 
|  | [NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN", | 
|  | [NLP_STE_PRLI_ISSUE] = "PRLI", | 
|  | [NLP_STE_UNMAPPED_NODE] = "UNMAPPED", | 
|  | [NLP_STE_MAPPED_NODE] = "MAPPED", | 
|  | [NLP_STE_NPR_NODE] = "NPR", | 
|  | }; | 
|  |  | 
|  | if (state < NLP_STE_MAX_STATE && states[state]) | 
|  | strlcpy(buffer, states[state], size); | 
|  | else | 
|  | snprintf(buffer, size, "unknown (%d)", state); | 
|  | return buffer; | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | int state) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | int  old_state = ndlp->nlp_state; | 
|  | char name1[16], name2[16]; | 
|  |  | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0904 NPort state transition x%06x, %s -> %s\n", | 
|  | ndlp->nlp_DID, | 
|  | lpfc_nlp_state_name(name1, sizeof(name1), old_state), | 
|  | lpfc_nlp_state_name(name2, sizeof(name2), state)); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, | 
|  | "node statechg    did:x%x old:%d ste:%d", | 
|  | ndlp->nlp_DID, old_state, state); | 
|  |  | 
|  | if (old_state == NLP_STE_NPR_NODE && | 
|  | state != NLP_STE_NPR_NODE) | 
|  | lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
|  | if (old_state == NLP_STE_UNMAPPED_NODE) { | 
|  | ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID; | 
|  | ndlp->nlp_type &= ~NLP_FC_NODE; | 
|  | } | 
|  |  | 
|  | if (list_empty(&ndlp->nlp_listp)) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } else if (old_state) | 
|  | lpfc_nlp_counters(vport, old_state, -1); | 
|  |  | 
|  | ndlp->nlp_state = state; | 
|  | lpfc_nlp_counters(vport, state, 1); | 
|  | lpfc_nlp_state_cleanup(vport, ndlp, old_state, state); | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | if (list_empty(&ndlp->nlp_listp)) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
|  | if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) | 
|  | lpfc_nlp_counters(vport, ndlp->nlp_state, -1); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | list_del_init(&ndlp->nlp_listp); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, | 
|  | NLP_STE_UNUSED_NODE); | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
|  | if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) | 
|  | lpfc_nlp_counters(vport, ndlp->nlp_state, -1); | 
|  | lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, | 
|  | NLP_STE_UNUSED_NODE); | 
|  | } | 
|  | /** | 
|  | * lpfc_initialize_node - Initialize all fields of node object | 
|  | * @vport: Pointer to Virtual Port object. | 
|  | * @ndlp: Pointer to FC node object. | 
|  | * @did: FC_ID of the node. | 
|  | * | 
|  | * This function is always called when node object need to be initialized. | 
|  | * It initializes all the fields of the node object. Although the reference | 
|  | * to phba from @ndlp can be obtained indirectly through it's reference to | 
|  | * @vport, a direct reference to phba is taken here by @ndlp. This is due | 
|  | * to the life-span of the @ndlp might go beyond the existence of @vport as | 
|  | * the final release of ndlp is determined by its reference count. And, the | 
|  | * operation on @ndlp needs the reference to phba. | 
|  | **/ | 
|  | static inline void | 
|  | lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | uint32_t did) | 
|  | { | 
|  | INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp); | 
|  | INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp); | 
|  | init_timer(&ndlp->nlp_delayfunc); | 
|  | ndlp->nlp_delayfunc.function = lpfc_els_retry_delay; | 
|  | ndlp->nlp_delayfunc.data = (unsigned long)ndlp; | 
|  | ndlp->nlp_DID = did; | 
|  | ndlp->vport = vport; | 
|  | ndlp->phba = vport->phba; | 
|  | ndlp->nlp_sid = NLP_NO_SID; | 
|  | kref_init(&ndlp->kref); | 
|  | NLP_INT_NODE_ACT(ndlp); | 
|  | atomic_set(&ndlp->cmd_pending, 0); | 
|  | ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; | 
|  | if (vport->phba->sli_rev == LPFC_SLI_REV4) | 
|  | ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba); | 
|  | } | 
|  |  | 
|  | struct lpfc_nodelist * | 
|  | lpfc_enable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | int state) | 
|  | { | 
|  | struct lpfc_hba *phba = vport->phba; | 
|  | uint32_t did; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!ndlp) | 
|  | return NULL; | 
|  |  | 
|  | spin_lock_irqsave(&phba->ndlp_lock, flags); | 
|  | /* The ndlp should not be in memory free mode */ | 
|  | if (NLP_CHK_FREE_REQ(ndlp)) { | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, | 
|  | "0277 lpfc_enable_node: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | return NULL; | 
|  | } | 
|  | /* The ndlp should not already be in active mode */ | 
|  | if (NLP_CHK_NODE_ACT(ndlp)) { | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, | 
|  | "0278 lpfc_enable_node: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Keep the original DID */ | 
|  | did = ndlp->nlp_DID; | 
|  |  | 
|  | /* re-initialize ndlp except of ndlp linked list pointer */ | 
|  | memset((((char *)ndlp) + sizeof (struct list_head)), 0, | 
|  | sizeof (struct lpfc_nodelist) - sizeof (struct list_head)); | 
|  | lpfc_initialize_node(vport, ndlp, did); | 
|  |  | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  |  | 
|  | if (state != NLP_STE_UNUSED_NODE) | 
|  | lpfc_nlp_set_state(vport, ndlp, state); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, | 
|  | "node enable:       did:x%x", | 
|  | ndlp->nlp_DID, 0, 0); | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | /* | 
|  | * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should | 
|  | * be used if we wish to issue the "last" lpfc_nlp_put() to remove | 
|  | * the ndlp from the vport. The ndlp marked as UNUSED on the list | 
|  | * until ALL other outstanding threads have completed. We check | 
|  | * that the ndlp not already in the UNUSED state before we proceed. | 
|  | */ | 
|  | if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | 
|  | return; | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); | 
|  | if (vport->phba->sli_rev == LPFC_SLI_REV4) | 
|  | lpfc_cleanup_vports_rrqs(vport, ndlp); | 
|  | lpfc_nlp_put(ndlp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start / ReStart rescue timer for Discovery / RSCN handling | 
|  | */ | 
|  | void | 
|  | lpfc_set_disctmo(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | uint32_t tmo; | 
|  |  | 
|  | if (vport->port_state == LPFC_LOCAL_CFG_LINK) { | 
|  | /* For FAN, timeout should be greater than edtov */ | 
|  | tmo = (((phba->fc_edtov + 999) / 1000) + 1); | 
|  | } else { | 
|  | /* Normal discovery timeout should be > than ELS/CT timeout | 
|  | * FC spec states we need 3 * ratov for CT requests | 
|  | */ | 
|  | tmo = ((phba->fc_ratov * 3) + 3); | 
|  | } | 
|  |  | 
|  |  | 
|  | if (!timer_pending(&vport->fc_disctmo)) { | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
|  | "set disc timer:  tmo:x%x state:x%x flg:x%x", | 
|  | tmo, vport->port_state, vport->fc_flag); | 
|  | } | 
|  |  | 
|  | mod_timer(&vport->fc_disctmo, jiffies + HZ * tmo); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag |= FC_DISC_TMO; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | /* Start Discovery Timer state <hba_state> */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0247 Start Discovery Timer state x%x " | 
|  | "Data: x%x x%lx x%x x%x\n", | 
|  | vport->port_state, tmo, | 
|  | (unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt, | 
|  | vport->fc_adisc_cnt); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Cancel rescue timer for Discovery / RSCN handling | 
|  | */ | 
|  | int | 
|  | lpfc_can_disctmo(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | unsigned long iflags; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
|  | "can disc timer:  state:x%x rtry:x%x flg:x%x", | 
|  | vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
|  |  | 
|  | /* Turn off discovery timer if its running */ | 
|  | if (vport->fc_flag & FC_DISC_TMO) { | 
|  | spin_lock_irqsave(shost->host_lock, iflags); | 
|  | vport->fc_flag &= ~FC_DISC_TMO; | 
|  | spin_unlock_irqrestore(shost->host_lock, iflags); | 
|  | del_timer_sync(&vport->fc_disctmo); | 
|  | spin_lock_irqsave(&vport->work_port_lock, iflags); | 
|  | vport->work_port_events &= ~WORKER_DISC_TMO; | 
|  | spin_unlock_irqrestore(&vport->work_port_lock, iflags); | 
|  | } | 
|  |  | 
|  | /* Cancel Discovery Timer state <hba_state> */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0248 Cancel Discovery Timer state x%x " | 
|  | "Data: x%x x%x x%x\n", | 
|  | vport->port_state, vport->fc_flag, | 
|  | vport->fc_plogi_cnt, vport->fc_adisc_cnt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check specified ring for outstanding IOCB on the SLI queue | 
|  | * Return true if iocb matches the specified nport | 
|  | */ | 
|  | int | 
|  | lpfc_check_sli_ndlp(struct lpfc_hba *phba, | 
|  | struct lpfc_sli_ring *pring, | 
|  | struct lpfc_iocbq *iocb, | 
|  | struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_sli *psli = &phba->sli; | 
|  | IOCB_t *icmd = &iocb->iocb; | 
|  | struct lpfc_vport    *vport = ndlp->vport; | 
|  |  | 
|  | if (iocb->vport != vport) | 
|  | return 0; | 
|  |  | 
|  | if (pring->ringno == LPFC_ELS_RING) { | 
|  | switch (icmd->ulpCommand) { | 
|  | case CMD_GEN_REQUEST64_CR: | 
|  | if (iocb->context_un.ndlp == ndlp) | 
|  | return 1; | 
|  | case CMD_ELS_REQUEST64_CR: | 
|  | if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID) | 
|  | return 1; | 
|  | case CMD_XMIT_ELS_RSP64_CX: | 
|  | if (iocb->context1 == (uint8_t *) ndlp) | 
|  | return 1; | 
|  | } | 
|  | } else if (pring->ringno == psli->extra_ring) { | 
|  |  | 
|  | } else if (pring->ringno == psli->fcp_ring) { | 
|  | /* Skip match check if waiting to relogin to FCP target */ | 
|  | if ((ndlp->nlp_type & NLP_FCP_TARGET) && | 
|  | (ndlp->nlp_flag & NLP_DELAY_TMO)) { | 
|  | return 0; | 
|  | } | 
|  | if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi) { | 
|  | return 1; | 
|  | } | 
|  | } else if (pring->ringno == psli->next_ring) { | 
|  |  | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free resources / clean up outstanding I/Os | 
|  | * associated with nlp_rpi in the LPFC_NODELIST entry. | 
|  | */ | 
|  | static int | 
|  | lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | LIST_HEAD(completions); | 
|  | struct lpfc_sli *psli; | 
|  | struct lpfc_sli_ring *pring; | 
|  | struct lpfc_iocbq *iocb, *next_iocb; | 
|  | uint32_t i; | 
|  |  | 
|  | lpfc_fabric_abort_nport(ndlp); | 
|  |  | 
|  | /* | 
|  | * Everything that matches on txcmplq will be returned | 
|  | * by firmware with a no rpi error. | 
|  | */ | 
|  | psli = &phba->sli; | 
|  | if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
|  | /* Now process each ring */ | 
|  | for (i = 0; i < psli->num_rings; i++) { | 
|  | pring = &psli->ring[i]; | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | list_for_each_entry_safe(iocb, next_iocb, &pring->txq, | 
|  | list) { | 
|  | /* | 
|  | * Check to see if iocb matches the nport we are | 
|  | * looking for | 
|  | */ | 
|  | if ((lpfc_check_sli_ndlp(phba, pring, iocb, | 
|  | ndlp))) { | 
|  | /* It matches, so deque and call compl | 
|  | with an error */ | 
|  | list_move_tail(&iocb->list, | 
|  | &completions); | 
|  | pring->txq_cnt--; | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Cancel all the IOCBs from the completions list */ | 
|  | lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, | 
|  | IOERR_SLI_ABORTED); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free rpi associated with LPFC_NODELIST entry. | 
|  | * This routine is called from lpfc_freenode(), when we are removing | 
|  | * a LPFC_NODELIST entry. It is also called if the driver initiates a | 
|  | * LOGO that completes successfully, and we are waiting to PLOGI back | 
|  | * to the remote NPort. In addition, it is called after we receive | 
|  | * and unsolicated ELS cmd, send back a rsp, the rsp completes and | 
|  | * we are waiting to PLOGI back to the remote NPort. | 
|  | */ | 
|  | int | 
|  | lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_hba *phba = vport->phba; | 
|  | LPFC_MBOXQ_t    *mbox; | 
|  | int rc; | 
|  | uint16_t rpi; | 
|  |  | 
|  | if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
|  | mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (mbox) { | 
|  | /* SLI4 ports require the physical rpi value. */ | 
|  | rpi = ndlp->nlp_rpi; | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; | 
|  | lpfc_unreg_login(phba, vport->vpi, rpi, mbox); | 
|  | mbox->vport = vport; | 
|  | mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  | } | 
|  | lpfc_no_rpi(phba, ndlp); | 
|  |  | 
|  | if (phba->sli_rev != LPFC_SLI_REV4) | 
|  | ndlp->nlp_rpi = 0; | 
|  | ndlp->nlp_flag &= ~NLP_RPI_REGISTERED; | 
|  | ndlp->nlp_flag &= ~NLP_NPR_ADISC; | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba. | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * | 
|  | * This routine is invoked to unregister all the currently registered RPIs | 
|  | * to the HBA. | 
|  | **/ | 
|  | void | 
|  | lpfc_unreg_hba_rpis(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport **vports; | 
|  | struct lpfc_nodelist *ndlp; | 
|  | struct Scsi_Host *shost; | 
|  | int i; | 
|  |  | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (!vports) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, | 
|  | "2884 Vport array allocation failed \n"); | 
|  | return; | 
|  | } | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
|  | shost = lpfc_shost_from_vport(vports[i]); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { | 
|  | if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
|  | /* The mempool_alloc might sleep */ | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_unreg_rpi(vports[i], ndlp); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_unreg_all_rpis(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_hba  *phba  = vport->phba; | 
|  | LPFC_MBOXQ_t     *mbox; | 
|  | int rc; | 
|  |  | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) { | 
|  | lpfc_sli4_unreg_all_rpis(vport); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (mbox) { | 
|  | lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, | 
|  | mbox); | 
|  | mbox->vport = vport; | 
|  | mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | mbox->context1 = NULL; | 
|  | rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | 
|  | if (rc != MBX_TIMEOUT) | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  |  | 
|  | if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, | 
|  | "1836 Could not issue " | 
|  | "unreg_login(all_rpis) status %d\n", rc); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_unreg_default_rpis(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_hba  *phba  = vport->phba; | 
|  | LPFC_MBOXQ_t     *mbox; | 
|  | int rc; | 
|  |  | 
|  | mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (mbox) { | 
|  | lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, | 
|  | mbox); | 
|  | mbox->vport = vport; | 
|  | mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | mbox->context1 = NULL; | 
|  | rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | 
|  | if (rc != MBX_TIMEOUT) | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  |  | 
|  | if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, | 
|  | "1815 Could not issue " | 
|  | "unreg_did (default rpis) status %d\n", | 
|  | rc); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free resources associated with LPFC_NODELIST entry | 
|  | * so it can be freed. | 
|  | */ | 
|  | static int | 
|  | lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | LPFC_MBOXQ_t *mb, *nextmb; | 
|  | struct lpfc_dmabuf *mp; | 
|  |  | 
|  | /* Cleanup node for NPort <nlp_DID> */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0900 Cleanup node for NPort x%x " | 
|  | "Data: x%x x%x x%x\n", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | ndlp->nlp_state, ndlp->nlp_rpi); | 
|  | if (NLP_CHK_FREE_REQ(ndlp)) { | 
|  | lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, | 
|  | "0280 lpfc_cleanup_node: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | lpfc_dequeue_node(vport, ndlp); | 
|  | } else { | 
|  | lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, | 
|  | "0281 lpfc_cleanup_node: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | lpfc_disable_node(vport, ndlp); | 
|  | } | 
|  |  | 
|  | /* cleanup any ndlp on mbox q waiting for reglogin cmpl */ | 
|  | if ((mb = phba->sli.mbox_active)) { | 
|  | if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && | 
|  | (ndlp == (struct lpfc_nodelist *) mb->context2)) { | 
|  | mb->context2 = NULL; | 
|  | mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | /* Cleanup REG_LOGIN completions which are not yet processed */ | 
|  | list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) { | 
|  | if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) || | 
|  | (ndlp != (struct lpfc_nodelist *) mb->context2)) | 
|  | continue; | 
|  |  | 
|  | mb->context2 = NULL; | 
|  | mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { | 
|  | if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && | 
|  | (ndlp == (struct lpfc_nodelist *) mb->context2)) { | 
|  | mp = (struct lpfc_dmabuf *) (mb->context1); | 
|  | if (mp) { | 
|  | __lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | } | 
|  | list_del(&mb->list); | 
|  | mempool_free(mb, phba->mbox_mem_pool); | 
|  | /* We shall not invoke the lpfc_nlp_put to decrement | 
|  | * the ndlp reference count as we are in the process | 
|  | * of lpfc_nlp_release. | 
|  | */ | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | lpfc_els_abort(phba, ndlp); | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag &= ~NLP_DELAY_TMO; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | ndlp->nlp_last_elscmd = 0; | 
|  | del_timer_sync(&ndlp->nlp_delayfunc); | 
|  |  | 
|  | list_del_init(&ndlp->els_retry_evt.evt_listp); | 
|  | list_del_init(&ndlp->dev_loss_evt.evt_listp); | 
|  | lpfc_cleanup_vports_rrqs(vport, ndlp); | 
|  | lpfc_unreg_rpi(vport, ndlp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check to see if we can free the nlp back to the freelist. | 
|  | * If we are in the middle of using the nlp in the discovery state | 
|  | * machine, defer the free till we reach the end of the state machine. | 
|  | */ | 
|  | static void | 
|  | lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | struct lpfc_rport_data *rdata; | 
|  | LPFC_MBOXQ_t *mbox; | 
|  | int rc; | 
|  |  | 
|  | lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
|  | if ((ndlp->nlp_flag & NLP_DEFER_RM) && | 
|  | !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) && | 
|  | !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) { | 
|  | /* For this case we need to cleanup the default rpi | 
|  | * allocated by the firmware. | 
|  | */ | 
|  | if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) | 
|  | != NULL) { | 
|  | rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID, | 
|  | (uint8_t *) &vport->fc_sparam, mbox, ndlp->nlp_rpi); | 
|  | if (rc) { | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  | } | 
|  | else { | 
|  | mbox->mbox_flag |= LPFC_MBX_IMED_UNREG; | 
|  | mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; | 
|  | mbox->vport = vport; | 
|  | mbox->context2 = NULL; | 
|  | rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | lpfc_cleanup_node(vport, ndlp); | 
|  |  | 
|  | /* | 
|  | * We can get here with a non-NULL ndlp->rport because when we | 
|  | * unregister a rport we don't break the rport/node linkage.  So if we | 
|  | * do, make sure we don't leaving any dangling pointers behind. | 
|  | */ | 
|  | if (ndlp->rport) { | 
|  | rdata = ndlp->rport->dd_data; | 
|  | rdata->pnode = NULL; | 
|  | ndlp->rport = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | uint32_t did) | 
|  | { | 
|  | D_ID mydid, ndlpdid, matchdid; | 
|  |  | 
|  | if (did == Bcast_DID) | 
|  | return 0; | 
|  |  | 
|  | /* First check for Direct match */ | 
|  | if (ndlp->nlp_DID == did) | 
|  | return 1; | 
|  |  | 
|  | /* Next check for area/domain identically equals 0 match */ | 
|  | mydid.un.word = vport->fc_myDID; | 
|  | if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | matchdid.un.word = did; | 
|  | ndlpdid.un.word = ndlp->nlp_DID; | 
|  | if (matchdid.un.b.id == ndlpdid.un.b.id) { | 
|  | if ((mydid.un.b.domain == matchdid.un.b.domain) && | 
|  | (mydid.un.b.area == matchdid.un.b.area)) { | 
|  | if ((ndlpdid.un.b.domain == 0) && | 
|  | (ndlpdid.un.b.area == 0)) { | 
|  | if (ndlpdid.un.b.id) | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | matchdid.un.word = ndlp->nlp_DID; | 
|  | if ((mydid.un.b.domain == ndlpdid.un.b.domain) && | 
|  | (mydid.un.b.area == ndlpdid.un.b.area)) { | 
|  | if ((matchdid.un.b.domain == 0) && | 
|  | (matchdid.un.b.area == 0)) { | 
|  | if (matchdid.un.b.id) | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Search for a nodelist entry */ | 
|  | static struct lpfc_nodelist * | 
|  | __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) | 
|  | { | 
|  | struct lpfc_nodelist *ndlp; | 
|  | uint32_t data1; | 
|  |  | 
|  | list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
|  | if (lpfc_matchdid(vport, ndlp, did)) { | 
|  | data1 = (((uint32_t) ndlp->nlp_state << 24) | | 
|  | ((uint32_t) ndlp->nlp_xri << 16) | | 
|  | ((uint32_t) ndlp->nlp_type << 8) | | 
|  | ((uint32_t) ndlp->nlp_rpi & 0xff)); | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0929 FIND node DID " | 
|  | "Data: x%p x%x x%x x%x\n", | 
|  | ndlp, ndlp->nlp_DID, | 
|  | ndlp->nlp_flag, data1); | 
|  | return ndlp; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* FIND node did <did> NOT FOUND */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
|  | "0932 FIND node did x%x NOT FOUND.\n", did); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct lpfc_nodelist * | 
|  | lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_nodelist *ndlp; | 
|  | unsigned long iflags; | 
|  |  | 
|  | spin_lock_irqsave(shost->host_lock, iflags); | 
|  | ndlp = __lpfc_findnode_did(vport, did); | 
|  | spin_unlock_irqrestore(shost->host_lock, iflags); | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | struct lpfc_nodelist * | 
|  | lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_nodelist *ndlp; | 
|  |  | 
|  | ndlp = lpfc_findnode_did(vport, did); | 
|  | if (!ndlp) { | 
|  | if ((vport->fc_flag & FC_RSCN_MODE) != 0 && | 
|  | lpfc_rscn_payload_check(vport, did) == 0) | 
|  | return NULL; | 
|  | ndlp = (struct lpfc_nodelist *) | 
|  | mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL); | 
|  | if (!ndlp) | 
|  | return NULL; | 
|  | lpfc_nlp_init(vport, ndlp, did); | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | return ndlp; | 
|  | } else if (!NLP_CHK_NODE_ACT(ndlp)) { | 
|  | ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE); | 
|  | if (!ndlp) | 
|  | return NULL; | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | if ((vport->fc_flag & FC_RSCN_MODE) && | 
|  | !(vport->fc_flag & FC_NDISC_ACTIVE)) { | 
|  | if (lpfc_rscn_payload_check(vport, did)) { | 
|  | /* If we've already received a PLOGI from this NPort | 
|  | * we don't need to try to discover it again. | 
|  | */ | 
|  | if (ndlp->nlp_flag & NLP_RCV_PLOGI) | 
|  | return NULL; | 
|  |  | 
|  | /* Since this node is marked for discovery, | 
|  | * delay timeout is not needed. | 
|  | */ | 
|  | lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } else | 
|  | ndlp = NULL; | 
|  | } else { | 
|  | /* If we've already received a PLOGI from this NPort, | 
|  | * or we are already in the process of discovery on it, | 
|  | * we don't need to try to discover it again. | 
|  | */ | 
|  | if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE || | 
|  | ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || | 
|  | ndlp->nlp_flag & NLP_RCV_PLOGI) | 
|  | return NULL; | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | /* Build a list of nodes to discover based on the loopmap */ | 
|  | void | 
|  | lpfc_disc_list_loopmap(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | int j; | 
|  | uint32_t alpa, index; | 
|  |  | 
|  | if (!lpfc_is_link_up(phba)) | 
|  | return; | 
|  |  | 
|  | if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) | 
|  | return; | 
|  |  | 
|  | /* Check for loop map present or not */ | 
|  | if (phba->alpa_map[0]) { | 
|  | for (j = 1; j <= phba->alpa_map[0]; j++) { | 
|  | alpa = phba->alpa_map[j]; | 
|  | if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0)) | 
|  | continue; | 
|  | lpfc_setup_disc_node(vport, alpa); | 
|  | } | 
|  | } else { | 
|  | /* No alpamap, so try all alpa's */ | 
|  | for (j = 0; j < FC_MAXLOOP; j++) { | 
|  | /* If cfg_scan_down is set, start from highest | 
|  | * ALPA (0xef) to lowest (0x1). | 
|  | */ | 
|  | if (vport->cfg_scan_down) | 
|  | index = j; | 
|  | else | 
|  | index = FC_MAXLOOP - j - 1; | 
|  | alpa = lpfcAlpaArray[index]; | 
|  | if ((vport->fc_myDID & 0xff) == alpa) | 
|  | continue; | 
|  | lpfc_setup_disc_node(vport, alpa); | 
|  | } | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport) | 
|  | { | 
|  | LPFC_MBOXQ_t *mbox; | 
|  | struct lpfc_sli *psli = &phba->sli; | 
|  | struct lpfc_sli_ring *extra_ring = &psli->ring[psli->extra_ring]; | 
|  | struct lpfc_sli_ring *fcp_ring   = &psli->ring[psli->fcp_ring]; | 
|  | struct lpfc_sli_ring *next_ring  = &psli->ring[psli->next_ring]; | 
|  | int  rc; | 
|  |  | 
|  | /* | 
|  | * if it's not a physical port or if we already send | 
|  | * clear_la then don't send it. | 
|  | */ | 
|  | if ((phba->link_state >= LPFC_CLEAR_LA) || | 
|  | (vport->port_type != LPFC_PHYSICAL_PORT) || | 
|  | (phba->sli_rev == LPFC_SLI_REV4)) | 
|  | return; | 
|  |  | 
|  | /* Link up discovery */ | 
|  | if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) { | 
|  | phba->link_state = LPFC_CLEAR_LA; | 
|  | lpfc_clear_la(phba, mbox); | 
|  | mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la; | 
|  | mbox->vport = vport; | 
|  | rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | mempool_free(mbox, phba->mbox_mem_pool); | 
|  | lpfc_disc_flush_list(vport); | 
|  | extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | next_ring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | phba->link_state = LPFC_HBA_ERROR; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Reg_vpi to tell firmware to resume normal operations */ | 
|  | void | 
|  | lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport) | 
|  | { | 
|  | LPFC_MBOXQ_t *regvpimbox; | 
|  |  | 
|  | regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (regvpimbox) { | 
|  | lpfc_reg_vpi(vport, regvpimbox); | 
|  | regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi; | 
|  | regvpimbox->vport = vport; | 
|  | if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT) | 
|  | == MBX_NOT_FINISHED) { | 
|  | mempool_free(regvpimbox, phba->mbox_mem_pool); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Start Link up / RSCN discovery on NPR nodes */ | 
|  | void | 
|  | lpfc_disc_start(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | uint32_t num_sent; | 
|  | uint32_t clear_la_pending; | 
|  | int did_changed; | 
|  |  | 
|  | if (!lpfc_is_link_up(phba)) | 
|  | return; | 
|  |  | 
|  | if (phba->link_state == LPFC_CLEAR_LA) | 
|  | clear_la_pending = 1; | 
|  | else | 
|  | clear_la_pending = 0; | 
|  |  | 
|  | if (vport->port_state < LPFC_VPORT_READY) | 
|  | vport->port_state = LPFC_DISC_AUTH; | 
|  |  | 
|  | lpfc_set_disctmo(vport); | 
|  |  | 
|  | if (vport->fc_prevDID == vport->fc_myDID) | 
|  | did_changed = 0; | 
|  | else | 
|  | did_changed = 1; | 
|  |  | 
|  | vport->fc_prevDID = vport->fc_myDID; | 
|  | vport->num_disc_nodes = 0; | 
|  |  | 
|  | /* Start Discovery state <hba_state> */ | 
|  | lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
|  | "0202 Start Discovery hba state x%x " | 
|  | "Data: x%x x%x x%x\n", | 
|  | vport->port_state, vport->fc_flag, vport->fc_plogi_cnt, | 
|  | vport->fc_adisc_cnt); | 
|  |  | 
|  | /* First do ADISCs - if any */ | 
|  | num_sent = lpfc_els_disc_adisc(vport); | 
|  |  | 
|  | if (num_sent) | 
|  | return; | 
|  |  | 
|  | /* Register the VPI for SLI3, NON-NPIV only. */ | 
|  | if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && | 
|  | !(vport->fc_flag & FC_PT2PT) && | 
|  | !(vport->fc_flag & FC_RSCN_MODE) && | 
|  | (phba->sli_rev < LPFC_SLI_REV4)) { | 
|  | lpfc_issue_reg_vpi(phba, vport); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For SLI2, we need to set port_state to READY and continue | 
|  | * discovery. | 
|  | */ | 
|  | if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) { | 
|  | /* If we get here, there is nothing to ADISC */ | 
|  | if (vport->port_type == LPFC_PHYSICAL_PORT) | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  |  | 
|  | if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { | 
|  | vport->num_disc_nodes = 0; | 
|  | /* go thru NPR nodes and issue ELS PLOGIs */ | 
|  | if (vport->fc_npr_cnt) | 
|  | lpfc_els_disc_plogi(vport); | 
|  |  | 
|  | if (!vport->num_disc_nodes) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_NDISC_ACTIVE; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_can_disctmo(vport); | 
|  | } | 
|  | } | 
|  | vport->port_state = LPFC_VPORT_READY; | 
|  | } else { | 
|  | /* Next do PLOGIs - if any */ | 
|  | num_sent = lpfc_els_disc_plogi(vport); | 
|  |  | 
|  | if (num_sent) | 
|  | return; | 
|  |  | 
|  | if (vport->fc_flag & FC_RSCN_MODE) { | 
|  | /* Check to see if more RSCNs came in while we | 
|  | * were processing this one. | 
|  | */ | 
|  | if ((vport->fc_rscn_id_cnt == 0) && | 
|  | (!(vport->fc_flag & FC_RSCN_DISCOVERY))) { | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_RSCN_MODE; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | lpfc_can_disctmo(vport); | 
|  | } else | 
|  | lpfc_els_handle_rscn(vport); | 
|  | } | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Ignore completion for all IOCBs on tx and txcmpl queue for ELS | 
|  | *  ring the match the sppecified nodelist. | 
|  | */ | 
|  | static void | 
|  | lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | LIST_HEAD(completions); | 
|  | struct lpfc_sli *psli; | 
|  | IOCB_t     *icmd; | 
|  | struct lpfc_iocbq    *iocb, *next_iocb; | 
|  | struct lpfc_sli_ring *pring; | 
|  |  | 
|  | psli = &phba->sli; | 
|  | pring = &psli->ring[LPFC_ELS_RING]; | 
|  |  | 
|  | /* Error matching iocb on txq or txcmplq | 
|  | * First check the txq. | 
|  | */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { | 
|  | if (iocb->context1 != ndlp) { | 
|  | continue; | 
|  | } | 
|  | icmd = &iocb->iocb; | 
|  | if ((icmd->ulpCommand == CMD_ELS_REQUEST64_CR) || | 
|  | (icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX)) { | 
|  |  | 
|  | list_move_tail(&iocb->list, &completions); | 
|  | pring->txq_cnt--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Next check the txcmplq */ | 
|  | list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { | 
|  | if (iocb->context1 != ndlp) { | 
|  | continue; | 
|  | } | 
|  | icmd = &iocb->iocb; | 
|  | if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR || | 
|  | icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX) { | 
|  | lpfc_sli_issue_abort_iotag(phba, pring, iocb); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | /* Cancel all the IOCBs from the completions list */ | 
|  | lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, | 
|  | IOERR_SLI_ABORTED); | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_disc_flush_list(struct lpfc_vport *vport) | 
|  | { | 
|  | struct lpfc_nodelist *ndlp, *next_ndlp; | 
|  | struct lpfc_hba *phba = vport->phba; | 
|  |  | 
|  | if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) { | 
|  | list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, | 
|  | nlp_listp) { | 
|  | if (!NLP_CHK_NODE_ACT(ndlp)) | 
|  | continue; | 
|  | if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || | 
|  | ndlp->nlp_state == NLP_STE_ADISC_ISSUE) { | 
|  | lpfc_free_tx(phba, ndlp); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_cleanup_discovery_resources(struct lpfc_vport *vport) | 
|  | { | 
|  | lpfc_els_flush_rscn(vport); | 
|  | lpfc_els_flush_cmd(vport); | 
|  | lpfc_disc_flush_list(vport); | 
|  | } | 
|  |  | 
|  | /*****************************************************************************/ | 
|  | /* | 
|  | * NAME:     lpfc_disc_timeout | 
|  | * | 
|  | * FUNCTION: Fibre Channel driver discovery timeout routine. | 
|  | * | 
|  | * EXECUTION ENVIRONMENT: interrupt only | 
|  | * | 
|  | * CALLED FROM: | 
|  | *      Timer function | 
|  | * | 
|  | * RETURNS: | 
|  | *      none | 
|  | */ | 
|  | /*****************************************************************************/ | 
|  | void | 
|  | lpfc_disc_timeout(unsigned long ptr) | 
|  | { | 
|  | struct lpfc_vport *vport = (struct lpfc_vport *) ptr; | 
|  | struct lpfc_hba   *phba = vport->phba; | 
|  | uint32_t tmo_posted; | 
|  | unsigned long flags = 0; | 
|  |  | 
|  | if (unlikely(!phba)) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&vport->work_port_lock, flags); | 
|  | tmo_posted = vport->work_port_events & WORKER_DISC_TMO; | 
|  | if (!tmo_posted) | 
|  | vport->work_port_events |= WORKER_DISC_TMO; | 
|  | spin_unlock_irqrestore(&vport->work_port_lock, flags); | 
|  |  | 
|  | if (!tmo_posted) | 
|  | lpfc_worker_wake_up(phba); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void | 
|  | lpfc_disc_timeout_handler(struct lpfc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_hba  *phba = vport->phba; | 
|  | struct lpfc_sli  *psli = &phba->sli; | 
|  | struct lpfc_nodelist *ndlp, *next_ndlp; | 
|  | LPFC_MBOXQ_t *initlinkmbox; | 
|  | int rc, clrlaerr = 0; | 
|  |  | 
|  | if (!(vport->fc_flag & FC_DISC_TMO)) | 
|  | return; | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vport->fc_flag &= ~FC_DISC_TMO; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
|  | "disc timeout:    state:x%x rtry:x%x flg:x%x", | 
|  | vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
|  |  | 
|  | switch (vport->port_state) { | 
|  |  | 
|  | case LPFC_LOCAL_CFG_LINK: | 
|  | /* port_state is identically  LPFC_LOCAL_CFG_LINK while waiting for | 
|  | * FAN | 
|  | */ | 
|  | /* FAN timeout */ | 
|  | lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY, | 
|  | "0221 FAN timeout\n"); | 
|  | /* Start discovery by sending FLOGI, clean up old rpis */ | 
|  | list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, | 
|  | nlp_listp) { | 
|  | if (!NLP_CHK_NODE_ACT(ndlp)) | 
|  | continue; | 
|  | if (ndlp->nlp_state != NLP_STE_NPR_NODE) | 
|  | continue; | 
|  | if (ndlp->nlp_type & NLP_FABRIC) { | 
|  | /* Clean up the ndlp on Fabric connections */ | 
|  | lpfc_drop_node(vport, ndlp); | 
|  |  | 
|  | } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { | 
|  | /* Fail outstanding IO now since device | 
|  | * is marked for PLOGI. | 
|  | */ | 
|  | lpfc_unreg_rpi(vport, ndlp); | 
|  | } | 
|  | } | 
|  | if (vport->port_state != LPFC_FLOGI) { | 
|  | if (phba->sli_rev <= LPFC_SLI_REV3) | 
|  | lpfc_initial_flogi(vport); | 
|  | else | 
|  | lpfc_issue_init_vfi(vport); | 
|  | return; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case LPFC_FDISC: | 
|  | case LPFC_FLOGI: | 
|  | /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */ | 
|  | /* Initial FLOGI timeout */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0222 Initial %s timeout\n", | 
|  | vport->vpi ? "FDISC" : "FLOGI"); | 
|  |  | 
|  | /* Assume no Fabric and go on with discovery. | 
|  | * Check for outstanding ELS FLOGI to abort. | 
|  | */ | 
|  |  | 
|  | /* FLOGI failed, so just use loop map to make discovery list */ | 
|  | lpfc_disc_list_loopmap(vport); | 
|  |  | 
|  | /* Start discovery */ | 
|  | lpfc_disc_start(vport); | 
|  | break; | 
|  |  | 
|  | case LPFC_FABRIC_CFG_LINK: | 
|  | /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for | 
|  | NameServer login */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0223 Timeout while waiting for " | 
|  | "NameServer login\n"); | 
|  | /* Next look for NameServer ndlp */ | 
|  | ndlp = lpfc_findnode_did(vport, NameServer_DID); | 
|  | if (ndlp && NLP_CHK_NODE_ACT(ndlp)) | 
|  | lpfc_els_abort(phba, ndlp); | 
|  |  | 
|  | /* ReStart discovery */ | 
|  | goto restart_disc; | 
|  |  | 
|  | case LPFC_NS_QRY: | 
|  | /* Check for wait for NameServer Rsp timeout */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0224 NameServer Query timeout " | 
|  | "Data: x%x x%x\n", | 
|  | vport->fc_ns_retry, LPFC_MAX_NS_RETRY); | 
|  |  | 
|  | if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { | 
|  | /* Try it one more time */ | 
|  | vport->fc_ns_retry++; | 
|  | rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, | 
|  | vport->fc_ns_retry, 0); | 
|  | if (rc == 0) | 
|  | break; | 
|  | } | 
|  | vport->fc_ns_retry = 0; | 
|  |  | 
|  | restart_disc: | 
|  | /* | 
|  | * Discovery is over. | 
|  | * set port_state to PORT_READY if SLI2. | 
|  | * cmpl_reg_vpi will set port_state to READY for SLI3. | 
|  | */ | 
|  | if (phba->sli_rev < LPFC_SLI_REV4) { | 
|  | if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) | 
|  | lpfc_issue_reg_vpi(phba, vport); | 
|  | else  { | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | vport->port_state = LPFC_VPORT_READY; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Setup and issue mailbox INITIALIZE LINK command */ | 
|  | initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!initlinkmbox) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0206 Device Discovery " | 
|  | "completion error\n"); | 
|  | phba->link_state = LPFC_HBA_ERROR; | 
|  | break; | 
|  | } | 
|  |  | 
|  | lpfc_linkdown(phba); | 
|  | lpfc_init_link(phba, initlinkmbox, phba->cfg_topology, | 
|  | phba->cfg_link_speed); | 
|  | initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; | 
|  | initlinkmbox->vport = vport; | 
|  | initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
|  | rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); | 
|  | lpfc_set_loopback_flag(phba); | 
|  | if (rc == MBX_NOT_FINISHED) | 
|  | mempool_free(initlinkmbox, phba->mbox_mem_pool); | 
|  |  | 
|  | break; | 
|  |  | 
|  | case LPFC_DISC_AUTH: | 
|  | /* Node Authentication timeout */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0227 Node Authentication timeout\n"); | 
|  | lpfc_disc_flush_list(vport); | 
|  |  | 
|  | /* | 
|  | * set port_state to PORT_READY if SLI2. | 
|  | * cmpl_reg_vpi will set port_state to READY for SLI3. | 
|  | */ | 
|  | if (phba->sli_rev < LPFC_SLI_REV4) { | 
|  | if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) | 
|  | lpfc_issue_reg_vpi(phba, vport); | 
|  | else  {	/* NPIV Not enabled */ | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | vport->port_state = LPFC_VPORT_READY; | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | case LPFC_VPORT_READY: | 
|  | if (vport->fc_flag & FC_RSCN_MODE) { | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0231 RSCN timeout Data: x%x " | 
|  | "x%x\n", | 
|  | vport->fc_ns_retry, LPFC_MAX_NS_RETRY); | 
|  |  | 
|  | /* Cleanup any outstanding ELS commands */ | 
|  | lpfc_els_flush_cmd(vport); | 
|  |  | 
|  | lpfc_els_flush_rscn(vport); | 
|  | lpfc_disc_flush_list(vport); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0273 Unexpected discovery timeout, " | 
|  | "vport State x%x\n", vport->port_state); | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (phba->link_state) { | 
|  | case LPFC_CLEAR_LA: | 
|  | /* CLEAR LA timeout */ | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0228 CLEAR LA timeout\n"); | 
|  | clrlaerr = 1; | 
|  | break; | 
|  |  | 
|  | case LPFC_LINK_UP: | 
|  | lpfc_issue_clear_la(phba, vport); | 
|  | /* Drop thru */ | 
|  | case LPFC_LINK_UNKNOWN: | 
|  | case LPFC_WARM_START: | 
|  | case LPFC_INIT_START: | 
|  | case LPFC_INIT_MBX_CMDS: | 
|  | case LPFC_LINK_DOWN: | 
|  | case LPFC_HBA_ERROR: | 
|  | lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, | 
|  | "0230 Unexpected timeout, hba link " | 
|  | "state x%x\n", phba->link_state); | 
|  | clrlaerr = 1; | 
|  | break; | 
|  |  | 
|  | case LPFC_HBA_READY: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (clrlaerr) { | 
|  | lpfc_disc_flush_list(vport); | 
|  | psli->ring[(psli->extra_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | psli->ring[(psli->fcp_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | psli->ring[(psli->next_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; | 
|  | vport->port_state = LPFC_VPORT_READY; | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine handles processing a NameServer REG_LOGIN mailbox | 
|  | * command upon completion. It is setup in the LPFC_MBOXQ | 
|  | * as the completion routine when the command is | 
|  | * handed off to the SLI layer. | 
|  | */ | 
|  | void | 
|  | lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
|  | { | 
|  | MAILBOX_t *mb = &pmb->u.mb; | 
|  | struct lpfc_dmabuf   *mp = (struct lpfc_dmabuf *) (pmb->context1); | 
|  | struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; | 
|  | struct lpfc_vport    *vport = pmb->vport; | 
|  |  | 
|  | pmb->context1 = NULL; | 
|  | pmb->context2 = NULL; | 
|  |  | 
|  | if (phba->sli_rev < LPFC_SLI_REV4) | 
|  | ndlp->nlp_rpi = mb->un.varWords[0]; | 
|  | ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
|  | ndlp->nlp_type |= NLP_FABRIC; | 
|  | lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
|  |  | 
|  | /* | 
|  | * Start issuing Fabric-Device Management Interface (FDMI) command to | 
|  | * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if | 
|  | * fdmi-on=2 (supporting RPA/hostnmae) | 
|  | */ | 
|  |  | 
|  | if (vport->cfg_fdmi_on == 1) | 
|  | lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA); | 
|  | else | 
|  | mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60); | 
|  |  | 
|  | /* decrement the node reference count held for this callback | 
|  | * function. | 
|  | */ | 
|  | lpfc_nlp_put(ndlp); | 
|  | lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
|  | kfree(mp); | 
|  | mempool_free(pmb, phba->mbox_mem_pool); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int | 
|  | lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param) | 
|  | { | 
|  | uint16_t *rpi = param; | 
|  |  | 
|  | /* check for active node */ | 
|  | if (!NLP_CHK_NODE_ACT(ndlp)) | 
|  | return 0; | 
|  |  | 
|  | return ndlp->nlp_rpi == *rpi; | 
|  | } | 
|  |  | 
|  | static int | 
|  | lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param) | 
|  | { | 
|  | return memcmp(&ndlp->nlp_portname, param, | 
|  | sizeof(ndlp->nlp_portname)) == 0; | 
|  | } | 
|  |  | 
|  | static struct lpfc_nodelist * | 
|  | __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) | 
|  | { | 
|  | struct lpfc_nodelist *ndlp; | 
|  |  | 
|  | list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
|  | if (filter(ndlp, param)) | 
|  | return ndlp; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine looks up the ndlp lists for the given RPI. If rpi found it | 
|  | * returns the node list element pointer else return NULL. | 
|  | */ | 
|  | struct lpfc_nodelist * | 
|  | __lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) | 
|  | { | 
|  | return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine looks up the ndlp lists for the given WWPN. If WWPN found it | 
|  | * returns the node element list pointer else return NULL. | 
|  | */ | 
|  | struct lpfc_nodelist * | 
|  | lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_nodelist *ndlp; | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine looks up the ndlp lists for the given RPI. If the rpi | 
|  | * is found, the routine returns the node element list pointer else | 
|  | * return NULL. | 
|  | */ | 
|  | struct lpfc_nodelist * | 
|  | lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) | 
|  | { | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  | struct lpfc_nodelist *ndlp; | 
|  |  | 
|  | spin_lock_irq(shost->host_lock); | 
|  | ndlp = __lpfc_findnode_rpi(vport, rpi); | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier | 
|  | * @phba: pointer to lpfc hba data structure. | 
|  | * @vpi: the physical host virtual N_Port identifier. | 
|  | * | 
|  | * This routine finds a vport on a HBA (referred by @phba) through a | 
|  | * @vpi. The function walks the HBA's vport list and returns the address | 
|  | * of the vport with the matching @vpi. | 
|  | * | 
|  | * Return code | 
|  | *    NULL - No vport with the matching @vpi found | 
|  | *    Otherwise - Address to the vport with the matching @vpi. | 
|  | **/ | 
|  | struct lpfc_vport * | 
|  | lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) | 
|  | { | 
|  | struct lpfc_vport *vport; | 
|  | unsigned long flags; | 
|  | int i = 0; | 
|  |  | 
|  | /* The physical ports are always vpi 0 - translate is unnecessary. */ | 
|  | if (vpi > 0) { | 
|  | /* | 
|  | * Translate the physical vpi to the logical vpi.  The | 
|  | * vport stores the logical vpi. | 
|  | */ | 
|  | for (i = 0; i < phba->max_vpi; i++) { | 
|  | if (vpi == phba->vpi_ids[i]) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (i >= phba->max_vpi) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_ELS, | 
|  | "2936 Could not find Vport mapped " | 
|  | "to vpi %d\n", vpi); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&phba->hbalock, flags); | 
|  | list_for_each_entry(vport, &phba->port_list, listentry) { | 
|  | if (vport->vpi == i) { | 
|  | spin_unlock_irqrestore(&phba->hbalock, flags); | 
|  | return vport; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&phba->hbalock, flags); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void | 
|  | lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
|  | uint32_t did) | 
|  | { | 
|  | memset(ndlp, 0, sizeof (struct lpfc_nodelist)); | 
|  |  | 
|  | lpfc_initialize_node(vport, ndlp, did); | 
|  | INIT_LIST_HEAD(&ndlp->nlp_listp); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, | 
|  | "node init:       did:x%x", | 
|  | ndlp->nlp_DID, 0, 0); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* This routine releases all resources associated with a specifc NPort's ndlp | 
|  | * and mempool_free's the nodelist. | 
|  | */ | 
|  | static void | 
|  | lpfc_nlp_release(struct kref *kref) | 
|  | { | 
|  | struct lpfc_hba *phba; | 
|  | unsigned long flags; | 
|  | struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist, | 
|  | kref); | 
|  |  | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
|  | "node release:    did:x%x flg:x%x type:x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
|  |  | 
|  | lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, | 
|  | "0279 lpfc_nlp_release: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  |  | 
|  | /* remove ndlp from action. */ | 
|  | lpfc_nlp_remove(ndlp->vport, ndlp); | 
|  |  | 
|  | /* clear the ndlp active flag for all release cases */ | 
|  | phba = ndlp->phba; | 
|  | spin_lock_irqsave(&phba->ndlp_lock, flags); | 
|  | NLP_CLR_NODE_ACT(ndlp); | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); | 
|  |  | 
|  | /* free ndlp memory for final ndlp release */ | 
|  | if (NLP_CHK_FREE_REQ(ndlp)) { | 
|  | kfree(ndlp->lat_data); | 
|  | mempool_free(ndlp, ndlp->phba->nlp_mem_pool); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* This routine bumps the reference count for a ndlp structure to ensure | 
|  | * that one discovery thread won't free a ndlp while another discovery thread | 
|  | * is using it. | 
|  | */ | 
|  | struct lpfc_nodelist * | 
|  | lpfc_nlp_get(struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_hba *phba; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ndlp) { | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
|  | "node get:        did:x%x flg:x%x refcnt:x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | /* The check of ndlp usage to prevent incrementing the | 
|  | * ndlp reference count that is in the process of being | 
|  | * released. | 
|  | */ | 
|  | phba = ndlp->phba; | 
|  | spin_lock_irqsave(&phba->ndlp_lock, flags); | 
|  | if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, | 
|  | "0276 lpfc_nlp_get: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | return NULL; | 
|  | } else | 
|  | kref_get(&ndlp->kref); | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | } | 
|  | return ndlp; | 
|  | } | 
|  |  | 
|  | /* This routine decrements the reference count for a ndlp structure. If the | 
|  | * count goes to 0, this indicates the the associated nodelist should be | 
|  | * freed. Returning 1 indicates the ndlp resource has been released; on the | 
|  | * other hand, returning 0 indicates the ndlp resource has not been released | 
|  | * yet. | 
|  | */ | 
|  | int | 
|  | lpfc_nlp_put(struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | struct lpfc_hba *phba; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!ndlp) | 
|  | return 1; | 
|  |  | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
|  | "node put:        did:x%x flg:x%x refcnt:x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | phba = ndlp->phba; | 
|  | spin_lock_irqsave(&phba->ndlp_lock, flags); | 
|  | /* Check the ndlp memory free acknowledge flag to avoid the | 
|  | * possible race condition that kref_put got invoked again | 
|  | * after previous one has done ndlp memory free. | 
|  | */ | 
|  | if (NLP_CHK_FREE_ACK(ndlp)) { | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, | 
|  | "0274 lpfc_nlp_put: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | return 1; | 
|  | } | 
|  | /* Check the ndlp inactivate log flag to avoid the possible | 
|  | * race condition that kref_put got invoked again after ndlp | 
|  | * is already in inactivating state. | 
|  | */ | 
|  | if (NLP_CHK_IACT_REQ(ndlp)) { | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, | 
|  | "0275 lpfc_nlp_put: ndlp:x%p " | 
|  | "usgmap:x%x refcnt:%d\n", | 
|  | (void *)ndlp, ndlp->nlp_usg_map, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | return 1; | 
|  | } | 
|  | /* For last put, mark the ndlp usage flags to make sure no | 
|  | * other kref_get and kref_put on the same ndlp shall get | 
|  | * in between the process when the final kref_put has been | 
|  | * invoked on this ndlp. | 
|  | */ | 
|  | if (atomic_read(&ndlp->kref.refcount) == 1) { | 
|  | /* Indicate ndlp is put to inactive state. */ | 
|  | NLP_SET_IACT_REQ(ndlp); | 
|  | /* Acknowledge ndlp memory free has been seen. */ | 
|  | if (NLP_CHK_FREE_REQ(ndlp)) | 
|  | NLP_SET_FREE_ACK(ndlp); | 
|  | } | 
|  | spin_unlock_irqrestore(&phba->ndlp_lock, flags); | 
|  | /* Note, the kref_put returns 1 when decrementing a reference | 
|  | * count that was 1, it invokes the release callback function, | 
|  | * but it still left the reference count as 1 (not actually | 
|  | * performs the last decrementation). Otherwise, it actually | 
|  | * decrements the reference count and returns 0. | 
|  | */ | 
|  | return kref_put(&ndlp->kref, lpfc_nlp_release); | 
|  | } | 
|  |  | 
|  | /* This routine free's the specified nodelist if it is not in use | 
|  | * by any other discovery thread. This routine returns 1 if the | 
|  | * ndlp has been freed. A return value of 0 indicates the ndlp is | 
|  | * not yet been released. | 
|  | */ | 
|  | int | 
|  | lpfc_nlp_not_used(struct lpfc_nodelist *ndlp) | 
|  | { | 
|  | lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
|  | "node not used:   did:x%x flg:x%x refcnt:x%x", | 
|  | ndlp->nlp_DID, ndlp->nlp_flag, | 
|  | atomic_read(&ndlp->kref.refcount)); | 
|  | if (atomic_read(&ndlp->kref.refcount) == 1) | 
|  | if (lpfc_nlp_put(ndlp)) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_fcf_inuse - Check if FCF can be unregistered. | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function iterate through all FC nodes associated | 
|  | * will all vports to check if there is any node with | 
|  | * fc_rports associated with it. If there is an fc_rport | 
|  | * associated with the node, then the node is either in | 
|  | * discovered state or its devloss_timer is pending. | 
|  | */ | 
|  | static int | 
|  | lpfc_fcf_inuse(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport **vports; | 
|  | int i, ret = 0; | 
|  | struct lpfc_nodelist *ndlp; | 
|  | struct Scsi_Host  *shost; | 
|  |  | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  |  | 
|  | /* If driver cannot allocate memory, indicate fcf is in use */ | 
|  | if (!vports) | 
|  | return 1; | 
|  |  | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
|  | shost = lpfc_shost_from_vport(vports[i]); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | /* | 
|  | * IF the CVL_RCVD bit is not set then we have sent the | 
|  | * flogi. | 
|  | * If dev_loss fires while we are waiting we do not want to | 
|  | * unreg the fcf. | 
|  | */ | 
|  | if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) { | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | ret =  1; | 
|  | goto out; | 
|  | } | 
|  | list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { | 
|  | if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport && | 
|  | (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { | 
|  | ret = 1; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | goto out; | 
|  | } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
|  | ret = 1; | 
|  | lpfc_printf_log(phba, KERN_INFO, LOG_ELS, | 
|  | "2624 RPI %x DID %x flag %x " | 
|  | "still logged in\n", | 
|  | ndlp->nlp_rpi, ndlp->nlp_DID, | 
|  | ndlp->nlp_flag); | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | out: | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi. | 
|  | * @phba: Pointer to hba context object. | 
|  | * @mboxq: Pointer to mailbox object. | 
|  | * | 
|  | * This function frees memory associated with the mailbox command. | 
|  | */ | 
|  | void | 
|  | lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
|  |  | 
|  | if (mboxq->u.mb.mbxStatus) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, | 
|  | "2555 UNREG_VFI mbxStatus error x%x " | 
|  | "HBA state x%x\n", | 
|  | mboxq->u.mb.mbxStatus, vport->port_state); | 
|  | } | 
|  | spin_lock_irq(shost->host_lock); | 
|  | phba->pport->fc_flag &= ~FC_VFI_REGISTERED; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi. | 
|  | * @phba: Pointer to hba context object. | 
|  | * @mboxq: Pointer to mailbox object. | 
|  | * | 
|  | * This function frees memory associated with the mailbox command. | 
|  | */ | 
|  | static void | 
|  | lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
|  | { | 
|  | struct lpfc_vport *vport = mboxq->vport; | 
|  |  | 
|  | if (mboxq->u.mb.mbxStatus) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, | 
|  | "2550 UNREG_FCFI mbxStatus error x%x " | 
|  | "HBA state x%x\n", | 
|  | mboxq->u.mb.mbxStatus, vport->port_state); | 
|  | } | 
|  | mempool_free(mboxq, phba->mbox_mem_pool); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_fcf_prep - Unregister fcf record preparation | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function prepare the HBA for unregistering the currently registered | 
|  | * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and | 
|  | * VFIs. | 
|  | */ | 
|  | int | 
|  | lpfc_unregister_fcf_prep(struct lpfc_hba *phba) | 
|  | { | 
|  | struct lpfc_vport **vports; | 
|  | struct lpfc_nodelist *ndlp; | 
|  | struct Scsi_Host *shost; | 
|  | int i, rc; | 
|  |  | 
|  | /* Unregister RPIs */ | 
|  | if (lpfc_fcf_inuse(phba)) | 
|  | lpfc_unreg_hba_rpis(phba); | 
|  |  | 
|  | /* At this point, all discovery is aborted */ | 
|  | phba->pport->port_state = LPFC_VPORT_UNKNOWN; | 
|  |  | 
|  | /* Unregister VPIs */ | 
|  | vports = lpfc_create_vport_work_array(phba); | 
|  | if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) | 
|  | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
|  | /* Stop FLOGI/FDISC retries */ | 
|  | ndlp = lpfc_findnode_did(vports[i], Fabric_DID); | 
|  | if (ndlp) | 
|  | lpfc_cancel_retry_delay_tmo(vports[i], ndlp); | 
|  | lpfc_cleanup_pending_mbox(vports[i]); | 
|  | if (phba->sli_rev == LPFC_SLI_REV4) | 
|  | lpfc_sli4_unreg_all_rpis(vports[i]); | 
|  | lpfc_mbx_unreg_vpi(vports[i]); | 
|  | shost = lpfc_shost_from_vport(vports[i]); | 
|  | spin_lock_irq(shost->host_lock); | 
|  | vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; | 
|  | vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; | 
|  | spin_unlock_irq(shost->host_lock); | 
|  | } | 
|  | lpfc_destroy_vport_work_array(phba, vports); | 
|  |  | 
|  | /* Cleanup any outstanding ELS commands */ | 
|  | lpfc_els_flush_all_cmd(phba); | 
|  |  | 
|  | /* Unregister the physical port VFI */ | 
|  | rc = lpfc_issue_unreg_vfi(phba->pport); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function issues synchronous unregister FCF mailbox command to HBA to | 
|  | * unregister the currently registered FCF record. The driver does not reset | 
|  | * the driver FCF usage state flags. | 
|  | * | 
|  | * Return 0 if successfully issued, none-zero otherwise. | 
|  | */ | 
|  | int | 
|  | lpfc_sli4_unregister_fcf(struct lpfc_hba *phba) | 
|  | { | 
|  | LPFC_MBOXQ_t *mbox; | 
|  | int rc; | 
|  |  | 
|  | mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
|  | if (!mbox) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, | 
|  | "2551 UNREG_FCFI mbox allocation failed" | 
|  | "HBA state x%x\n", phba->pport->port_state); | 
|  | return -ENOMEM; | 
|  | } | 
|  | lpfc_unreg_fcfi(mbox, phba->fcf.fcfi); | 
|  | mbox->vport = phba->pport; | 
|  | mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl; | 
|  | rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
|  |  | 
|  | if (rc == MBX_NOT_FINISHED) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, | 
|  | "2552 Unregister FCFI command failed rc x%x " | 
|  | "HBA state x%x\n", | 
|  | rc, phba->pport->port_state); | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function unregisters the currently reigstered FCF. This function | 
|  | * also tries to find another FCF for discovery by rescan the HBA FCF table. | 
|  | */ | 
|  | void | 
|  | lpfc_unregister_fcf_rescan(struct lpfc_hba *phba) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | /* Preparation for unregistering fcf */ | 
|  | rc = lpfc_unregister_fcf_prep(phba); | 
|  | if (rc) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, | 
|  | "2748 Failed to prepare for unregistering " | 
|  | "HBA's FCF record: rc=%d\n", rc); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Now, unregister FCF record and reset HBA FCF state */ | 
|  | rc = lpfc_sli4_unregister_fcf(phba); | 
|  | if (rc) | 
|  | return; | 
|  | /* Reset HBA FCF states after successful unregister FCF */ | 
|  | phba->fcf.fcf_flag = 0; | 
|  | phba->fcf.current_rec.flag = 0; | 
|  |  | 
|  | /* | 
|  | * If driver is not unloading, check if there is any other | 
|  | * FCF record that can be used for discovery. | 
|  | */ | 
|  | if ((phba->pport->load_flag & FC_UNLOADING) || | 
|  | (phba->link_state < LPFC_LINK_UP)) | 
|  | return; | 
|  |  | 
|  | /* This is considered as the initial FCF discovery scan */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag |= FCF_INIT_DISC; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | /* Reset FCF roundrobin bmask for new discovery */ | 
|  | lpfc_sli4_clear_fcf_rr_bmask(phba); | 
|  |  | 
|  | rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); | 
|  |  | 
|  | if (rc) { | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_INIT_DISC; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, | 
|  | "2553 lpfc_unregister_unused_fcf failed " | 
|  | "to read FCF record HBA state x%x\n", | 
|  | phba->pport->port_state); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_fcf - Unregister the currently registered fcf record | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function just unregisters the currently reigstered FCF. It does not | 
|  | * try to find another FCF for discovery. | 
|  | */ | 
|  | void | 
|  | lpfc_unregister_fcf(struct lpfc_hba *phba) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | /* Preparation for unregistering fcf */ | 
|  | rc = lpfc_unregister_fcf_prep(phba); | 
|  | if (rc) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, | 
|  | "2749 Failed to prepare for unregistering " | 
|  | "HBA's FCF record: rc=%d\n", rc); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Now, unregister FCF record and reset HBA FCF state */ | 
|  | rc = lpfc_sli4_unregister_fcf(phba); | 
|  | if (rc) | 
|  | return; | 
|  | /* Set proper HBA FCF states after successful unregister FCF */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | phba->fcf.fcf_flag &= ~FCF_REGISTERED; | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected. | 
|  | * @phba: Pointer to hba context object. | 
|  | * | 
|  | * This function check if there are any connected remote port for the FCF and | 
|  | * if all the devices are disconnected, this function unregister FCFI. | 
|  | * This function also tries to use another FCF for discovery. | 
|  | */ | 
|  | void | 
|  | lpfc_unregister_unused_fcf(struct lpfc_hba *phba) | 
|  | { | 
|  | /* | 
|  | * If HBA is not running in FIP mode, if HBA does not support | 
|  | * FCoE, if FCF discovery is ongoing, or if FCF has not been | 
|  | * registered, do nothing. | 
|  | */ | 
|  | spin_lock_irq(&phba->hbalock); | 
|  | if (!(phba->hba_flag & HBA_FCOE_MODE) || | 
|  | !(phba->fcf.fcf_flag & FCF_REGISTERED) || | 
|  | !(phba->hba_flag & HBA_FIP_SUPPORT) || | 
|  | (phba->fcf.fcf_flag & FCF_DISCOVERY) || | 
|  | (phba->pport->port_state == LPFC_FLOGI)) { | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  | return; | 
|  | } | 
|  | spin_unlock_irq(&phba->hbalock); | 
|  |  | 
|  | if (lpfc_fcf_inuse(phba)) | 
|  | return; | 
|  |  | 
|  | lpfc_unregister_fcf_rescan(phba); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_read_fcf_conn_tbl - Create driver FCF connection table. | 
|  | * @phba: Pointer to hba context object. | 
|  | * @buff: Buffer containing the FCF connection table as in the config | 
|  | *         region. | 
|  | * This function create driver data structure for the FCF connection | 
|  | * record table read from config region 23. | 
|  | */ | 
|  | static void | 
|  | lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba, | 
|  | uint8_t *buff) | 
|  | { | 
|  | struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry; | 
|  | struct lpfc_fcf_conn_hdr *conn_hdr; | 
|  | struct lpfc_fcf_conn_rec *conn_rec; | 
|  | uint32_t record_count; | 
|  | int i; | 
|  |  | 
|  | /* Free the current connect table */ | 
|  | list_for_each_entry_safe(conn_entry, next_conn_entry, | 
|  | &phba->fcf_conn_rec_list, list) { | 
|  | list_del_init(&conn_entry->list); | 
|  | kfree(conn_entry); | 
|  | } | 
|  |  | 
|  | conn_hdr = (struct lpfc_fcf_conn_hdr *) buff; | 
|  | record_count = conn_hdr->length * sizeof(uint32_t)/ | 
|  | sizeof(struct lpfc_fcf_conn_rec); | 
|  |  | 
|  | conn_rec = (struct lpfc_fcf_conn_rec *) | 
|  | (buff + sizeof(struct lpfc_fcf_conn_hdr)); | 
|  |  | 
|  | for (i = 0; i < record_count; i++) { | 
|  | if (!(conn_rec[i].flags & FCFCNCT_VALID)) | 
|  | continue; | 
|  | conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry), | 
|  | GFP_KERNEL); | 
|  | if (!conn_entry) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "2566 Failed to allocate connection" | 
|  | " table entry\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memcpy(&conn_entry->conn_rec, &conn_rec[i], | 
|  | sizeof(struct lpfc_fcf_conn_rec)); | 
|  | conn_entry->conn_rec.vlan_tag = | 
|  | le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF; | 
|  | conn_entry->conn_rec.flags = | 
|  | le16_to_cpu(conn_entry->conn_rec.flags); | 
|  | list_add_tail(&conn_entry->list, | 
|  | &phba->fcf_conn_rec_list); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_read_fcoe_param - Read FCoe parameters from conf region.. | 
|  | * @phba: Pointer to hba context object. | 
|  | * @buff: Buffer containing the FCoE parameter data structure. | 
|  | * | 
|  | *  This function update driver data structure with config | 
|  | *  parameters read from config region 23. | 
|  | */ | 
|  | static void | 
|  | lpfc_read_fcoe_param(struct lpfc_hba *phba, | 
|  | uint8_t *buff) | 
|  | { | 
|  | struct lpfc_fip_param_hdr *fcoe_param_hdr; | 
|  | struct lpfc_fcoe_params *fcoe_param; | 
|  |  | 
|  | fcoe_param_hdr = (struct lpfc_fip_param_hdr *) | 
|  | buff; | 
|  | fcoe_param = (struct lpfc_fcoe_params *) | 
|  | (buff + sizeof(struct lpfc_fip_param_hdr)); | 
|  |  | 
|  | if ((fcoe_param_hdr->parm_version != FIPP_VERSION) || | 
|  | (fcoe_param_hdr->length != FCOE_PARAM_LENGTH)) | 
|  | return; | 
|  |  | 
|  | if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) { | 
|  | phba->valid_vlan = 1; | 
|  | phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) & | 
|  | 0xFFF; | 
|  | } | 
|  |  | 
|  | phba->fc_map[0] = fcoe_param->fc_map[0]; | 
|  | phba->fc_map[1] = fcoe_param->fc_map[1]; | 
|  | phba->fc_map[2] = fcoe_param->fc_map[2]; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_get_rec_conf23 - Get a record type in config region data. | 
|  | * @buff: Buffer containing config region 23 data. | 
|  | * @size: Size of the data buffer. | 
|  | * @rec_type: Record type to be searched. | 
|  | * | 
|  | * This function searches config region data to find the beginning | 
|  | * of the record specified by record_type. If record found, this | 
|  | * function return pointer to the record else return NULL. | 
|  | */ | 
|  | static uint8_t * | 
|  | lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) | 
|  | { | 
|  | uint32_t offset = 0, rec_length; | 
|  |  | 
|  | if ((buff[0] == LPFC_REGION23_LAST_REC) || | 
|  | (size < sizeof(uint32_t))) | 
|  | return NULL; | 
|  |  | 
|  | rec_length = buff[offset + 1]; | 
|  |  | 
|  | /* | 
|  | * One TLV record has one word header and number of data words | 
|  | * specified in the rec_length field of the record header. | 
|  | */ | 
|  | while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t)) | 
|  | <= size) { | 
|  | if (buff[offset] == rec_type) | 
|  | return &buff[offset]; | 
|  |  | 
|  | if (buff[offset] == LPFC_REGION23_LAST_REC) | 
|  | return NULL; | 
|  |  | 
|  | offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t); | 
|  | rec_length = buff[offset + 1]; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23. | 
|  | * @phba: Pointer to lpfc_hba data structure. | 
|  | * @buff: Buffer containing config region 23 data. | 
|  | * @size: Size of the data buffer. | 
|  | * | 
|  | * This function parses the FCoE config parameters in config region 23 and | 
|  | * populate driver data structure with the parameters. | 
|  | */ | 
|  | void | 
|  | lpfc_parse_fcoe_conf(struct lpfc_hba *phba, | 
|  | uint8_t *buff, | 
|  | uint32_t size) | 
|  | { | 
|  | uint32_t offset = 0, rec_length; | 
|  | uint8_t *rec_ptr; | 
|  |  | 
|  | /* | 
|  | * If data size is less than 2 words signature and version cannot be | 
|  | * verified. | 
|  | */ | 
|  | if (size < 2*sizeof(uint32_t)) | 
|  | return; | 
|  |  | 
|  | /* Check the region signature first */ | 
|  | if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "2567 Config region 23 has bad signature\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | offset += 4; | 
|  |  | 
|  | /* Check the data structure version */ | 
|  | if (buff[offset] != LPFC_REGION23_VERSION) { | 
|  | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, | 
|  | "2568 Config region 23 has bad version\n"); | 
|  | return; | 
|  | } | 
|  | offset += 4; | 
|  |  | 
|  | rec_length = buff[offset + 1]; | 
|  |  | 
|  | /* Read FCoE param record */ | 
|  | rec_ptr = lpfc_get_rec_conf23(&buff[offset], | 
|  | size - offset, FCOE_PARAM_TYPE); | 
|  | if (rec_ptr) | 
|  | lpfc_read_fcoe_param(phba, rec_ptr); | 
|  |  | 
|  | /* Read FCF connection table */ | 
|  | rec_ptr = lpfc_get_rec_conf23(&buff[offset], | 
|  | size - offset, FCOE_CONN_TBL_TYPE); | 
|  | if (rec_ptr) | 
|  | lpfc_read_fcf_conn_tbl(phba, rec_ptr); | 
|  |  | 
|  | } |