ARM: 5879/1: ep93xx: define magic numbers for pll1 and pll2
Add defines for the pll register magic numbers that determine if
the pll's are bypassed and if pll2 is enabled. Rename the clock
set registers to more closely match the datasheet. Also, remove
the unnecessary braces since each conditional statement is a single
statement.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 07a58d0..27e3351 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -449,25 +449,29 @@
u32 value;
int i;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
- if (!(value & 0x00800000)) { /* PLL1 bypassed? */
+ /* Determine the bootloader configured pll1 rate */
+ value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+ if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
clk_pll1.rate = clk_xtali.rate;
- } else {
+ else
clk_pll1.rate = calc_pll_rate(value);
- }
+
+ /* Initialize the pll1 derived clocks */
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
+ /* Determine the bootloader configured pll2 rate */
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
- if (!(value & 0x00080000)) { /* PLL2 bypassed? */
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
clk_pll2.rate = clk_xtali.rate;
- } else if (value & 0x00040000) { /* PLL2 enabled? */
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
clk_pll2.rate = calc_pll_rate(value);
- } else {
+ else
clk_pll2.rate = 0;
- }
+
+ /* Initialize the pll2 derived clocks */
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",