ide: remove ide_execute_pkt_cmd() (v2)
* Pass command structure to ide_execute_command() and skip
__ide_set_handler() for ATAPI protocols on non-DRQ devices.
* Convert ide_issue_pc() to always use ide_execute_command()
and remove no longer needed ide_execute_pkt_cmd().
v2:
* Fix for non-DRQ devices (based on report from Borislav).
There should be no functional changes caused by this patch.
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 52c1258..5403e4a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -451,7 +451,7 @@
/**
* ide_execute_command - execute an IDE command
* @drive: IDE drive to issue the command against
- * @command: command byte to write
+ * @cmd: command
* @handler: handler for next phase
* @timeout: timeout for command
*
@@ -461,15 +461,18 @@
* should go via this function or do equivalent locking.
*/
-void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
- unsigned timeout)
+void ide_execute_command(ide_drive_t *drive, struct ide_cmd *cmd,
+ ide_handler_t *handler, unsigned timeout)
{
ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
spin_lock_irqsave(&hwif->lock, flags);
- __ide_set_handler(drive, handler, timeout);
- hwif->tp_ops->exec_command(hwif, cmd);
+ if ((cmd->protocol != ATAPI_PROT_DMA &&
+ cmd->protocol != ATAPI_PROT_PIO) ||
+ (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT))
+ __ide_set_handler(drive, handler, timeout);
+ hwif->tp_ops->exec_command(hwif, cmd->tf.command);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
@@ -480,18 +483,6 @@
spin_unlock_irqrestore(&hwif->lock, flags);
}
-void ide_execute_pkt_cmd(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
-
- spin_lock_irqsave(&hwif->lock, flags);
- hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET);
- ndelay(400);
- spin_unlock_irqrestore(&hwif->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);
-
/*
* ide_wait_not_busy() waits for the currently selected device on the hwif
* to report a non-busy status, see comments in ide_probe_port().