Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
arch/sparc/kernel/smp_64.c
arch/x86/kernel/cpu/perf_counter.c
arch/x86/kernel/setup_percpu.c
drivers/cpufreq/cpufreq_ondemand.c
mm/percpu.c
Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 646fcab..e06b2ee 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,6 +24,7 @@
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_PERF_COUNTERS if (!M386 && !M486)
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -739,7 +740,6 @@
config X86_LOCAL_APIC
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
- select HAVE_PERF_COUNTERS if (!M386 && !M486)
config X86_IO_APIC
def_bool y
@@ -1910,6 +1910,18 @@
recommended you say N here while the DMAR code remains
experimental.
+config DMAR_BROKEN_GFX_WA
+ def_bool n
+ prompt "Workaround broken graphics drivers (going away soon)"
+ depends on DMAR
+ ---help---
+ Current Graphics drivers tend to use physical address
+ for DMA and avoid using DMA APIs. Setting this config
+ option permits the IOMMU driver to set a unity map for
+ all the OS-visible memory. Hence the driver can continue
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
+
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be4..49e0c18 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@
ireg.al = mode; /* AH=0x00 Set Video Mode */
intcall(0x10, &ireg, NULL);
-
ireg.ah = 0x0f; /* Get Current Video Mode */
intcall(0x10, &ireg, &oreg);
do_restore = 1; /* Assume video contents were lost */
/* Not all BIOSes are clean with the top bit */
- new_mode = ireg.al & 0x7f;
+ new_mode = oreg.al & 0x7f;
if (new_mode == mode)
return 0; /* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147..275dd17 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@
ireg.di = (size_t)&vginfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f ||
+ if (oreg.ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
@@ -70,7 +70,7 @@
ireg.di = (size_t)&vminfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f)
+ if (oreg.ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e..dc5a667 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -28,7 +31,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@
return atomic_add_return(-i, v);
}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@
/* An 64bit atomic type */
typedef struct {
- unsigned long long counter;
+ u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr) ((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
- asm volatile(
-
- LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
- : "=A" (old)
-
- : [ptr] "D" (ptr),
- "A" (old),
- "b" (ll_low(new)),
- "c" (ll_high(new))
-
- : "memory");
-
- return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
- unsigned long long new_val)
-{
- return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
/**
* atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@
* Atomically xchgs the value of @ptr to @new_val and returns
* the old value.
*/
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
- unsigned long long old_val;
-
- do {
- old_val = atomic_read(ptr);
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
/**
* atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@
*
* Atomically sets the value of @ptr to @new_val.
*/
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
- atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
/**
* atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@
*
* Atomically reads the value of @ptr and returns it.
*/
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
{
- unsigned long long curr_val;
+ u64 res;
- do {
- curr_val = __atomic64_read(ptr);
- } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
+ /*
+ * Note, we inline this atomic64_t primitive because
+ * it only clobbers EAX/EDX and leaves the others
+ * untouched. We also (somewhat subtly) rely on the
+ * fact that cmpxchg8b returns the current 64-bit value
+ * of the memory location we are touching:
+ */
+ asm volatile(
+ "mov %%ebx, %%eax\n\t"
+ "mov %%ecx, %%edx\n\t"
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "=&A" (res)
+ : "m" (*ptr)
+ );
- return curr_val;
+ return res;
}
+extern u64 atomic64_read(atomic64_t *ptr);
+
/**
* atomic64_add_return - add and return
* @delta: integer value to add
@@ -347,34 +326,14 @@
*
* Atomically adds @delta to @ptr and returns @delta + *@ptr
*/
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val, new_val;
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
- do {
- old_val = atomic_read(ptr);
- new_val = old_val + delta;
-
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
- return atomic64_add_return(-delta, ptr);
-}
-
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
- return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
- return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
/**
* atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@
*
* Atomically adds @delta to @ptr.
*/
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@
*
* Atomically subtracts @delta from @ptr.
*/
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@
* true if the result is zero, or false for all
* other cases.
*/
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
- return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
/**
* atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@
*
* Atomically increments @ptr by 1.
*/
-static inline void atomic64_inc(atomic64_t *ptr)
-{
- atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
/**
* atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@
*
* Atomically decrements @ptr by 1.
*/
-static inline void atomic64_dec(atomic64_t *ptr)
-{
- atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
/**
* atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@
* returns true if the result is 0, or false for all other
* cases.
*/
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
/**
* atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@
* and returns true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
/**
* atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
- long long old_val = atomic64_add_return(delta, ptr);
-
- return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
#include <asm-generic/atomic-long.h>
#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d63602..d605dc2 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -27,7 +30,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@
* Atomically reads the value of @v.
* Doesn't imply a read memory barrier.
*/
-#define atomic64_read(v) ((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+ return v->counter;
+}
/**
* atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic64_set(v, i) (((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+ v->counter = i;
+}
/**
* atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@
#define atomic64_inc_return(v) (atomic64_add_return(1, (v)))
#define atomic64_dec_return(v) (atomic64_sub_return(1, (v)))
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+ return xchg(&v->counter, new);
+}
+
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index edc90f2..8406ed7 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,7 +33,7 @@
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size) ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
#else /* !CONFIG_X86_32 */
@@ -84,7 +84,8 @@
efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+ u32 type);
#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3..7b2d71d 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
- FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */
- FIX_TEXT_POKE1,
+ FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
+ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- FIX_OHCI1394_BASE,
-#endif
/*
* 256 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
@@ -129,6 +126,9 @@
FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
(__end_of_permanent_fixed_addresses & 255),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ FIX_OHCI1394_BASE,
+#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index daf866e..330ee80 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@
struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
@@ -180,6 +181,7 @@
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
static inline void ioapic_init_mappings(void) { }
+static inline void ioapic_insert_resources(void) { }
static inline void probe_nr_irqs_gsi(void) { }
#endif
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 2bdab21..c6ccbe7 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -12,9 +12,15 @@
{
unsigned long flags;
+ /*
+ * Note: this needs to be "=r" not "=rm", because we have the
+ * stack offset from what gcc expects at the time the "pop" is
+ * executed, and so a memory reference with respect to the stack
+ * would end up using the wrong address.
+ */
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
- : "=g" (flags)
+ : "=r" (flags)
: /* no input */
: "memory");
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389c..5136dad 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
/* Pages for switcher itself, then two pages per cpu */
#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
#ifdef CONFIG_X86_PAE
#define SWITCHER_ADDR 0xFFE00000
#else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index d31c4a6..ba0eed8 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,27 +30,27 @@
#include <asm/hw_irq.h>
#include <asm/kvm_para.h>
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax.
*
* Grossly invalid calls result in Sudden Death at the hands of the vengeful
* Host, rather than returning failure. This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
/* Can't use our min() macro here: needs to be a constant */
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
#define LHCALL_RING_SIZE 64
struct hcall_args {
- /* These map directly onto eax, ebx, ecx, edx and esi
- * in struct lguest_regs */
+ /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
unsigned long arg0, arg1, arg2, arg3, arg4;
};
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5..6be7fc2 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38)
#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39)
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0 0x00000186
-#define MSR_P6_EVNTSEL1 0x00000187
-
/* P4/Xeon+ specific */
#define MSR_IA32_MCG_EAX 0x00000180
#define MSR_IA32_MCG_EBX 0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c972644..c86e5ed4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@
int lapic_watchdog_init(unsigned nmi_hz);
int lapic_wd_event(unsigned nmi_hz);
unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
void disable_lapic_nmi_watchdog(void);
void enable_lapic_nmi_watchdog(void);
void stop_nmi(void);
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54..0e8c2a0 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@
__free_page(pte);
}
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address)
+{
+ ___pte_free_tlb(tlb, pte);
+}
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@
free_page((unsigned long)pmd);
}
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long adddress)
+{
+ ___pmd_free_tlb(tlb, pmd);
+}
#ifdef CONFIG_X86_PAE
extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@
free_page((unsigned long)pud);
}
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long address)
+{
+ ___pud_free_tlb(tlb, pud);
+}
+
#endif /* PAGETABLE_LEVELS > 3 */
#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db8..4e77853 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944..cf86a5e 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
extern int kstack_depth_to_print;
+int x86_is_stack_id(int id, char *name);
+
/* Generic stack tracer with callbacks */
struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b078352..fad7d40 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a79..d2c6c93 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@
: "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
#else
#define __put_user_asm_u64(x, ptr, retval, errret) \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+ __put_user_asm(x, ptr, retval, "q", "", "er", errret)
#define __put_user_asm_ex_u64(x, addr) \
- __put_user_asm_ex(x, addr, "q", "", "Zr")
+ __put_user_asm_ex(x, addr, "q", "", "er")
#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
#endif
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc6873..db24b21 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@
ret, "l", "k", "ir", 4);
return ret;
case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
case 10:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 10);
+ ret, "q", "", "er", 10);
if (unlikely(ret))
return ret;
asm("":::"memory");
@@ -101,12 +101,12 @@
return ret;
case 16:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 16);
+ ret, "q", "", "er", 16);
if (unlikely(ret))
return ret;
asm("":::"memory");
__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
default:
return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@
ret, "q", "", "=r", 8);
if (likely(!ret))
__put_user_asm(tmp, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
}
default:
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 341070f..77a6850 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -175,7 +175,7 @@
#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
- ((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+ (((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
#define UV_APIC_PNODE_SHIFT 6
@@ -327,6 +327,7 @@
unsigned short nr_possible_cpus;
unsigned short nr_online_cpus;
unsigned short pnode;
+ short memory_nid;
};
extern struct uv_blade_info *uv_blade_info;
extern short *uv_node_to_blade;
@@ -363,6 +364,12 @@
return uv_blade_info[bid].pnode;
}
+/* Nid of memory node on blade. -1 if no blade-local memory */
+static inline int uv_blade_to_memory_nid(int bid)
+{
+ return uv_blade_info[bid].memory_nid;
+}
+
/* Determine the number of possible cpus on a blade */
static inline int uv_blade_nr_possible_cpus(int bid)
{
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b8..430d5b2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@
CFLAGS_paravirt.o := $(nostackp)
GCOV_PROFILE_vsyscall_64.o := n
GCOV_PROFILE_hpet.o := n
+GCOV_PROFILE_tsc.o := n
+GCOV_PROFILE_paravirt.o := n
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f04..6c99f50 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@
return 0;
}
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
.notifier_call = device_change_notifier,
};
@@ -1763,7 +1763,7 @@
flag |= __GFP_ZERO;
virt_addr = (void *)__get_free_pages(flag, get_order(size));
if (!virt_addr)
- return 0;
+ return NULL;
paddr = virt_to_phys(virt_addr);
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2acc..c1b17e9 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@
if (iommu->evt_buf == NULL)
return NULL;
+ iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
return iommu->evt_buf;
}
@@ -691,6 +693,7 @@
devid = e->devid;
devid_to = e->ext >> 8;
+ set_dev_entry_from_acpi(iommu, devid , e->flags, 0);
set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
amd_iommu_alias_table[devid] = devid_to;
break;
@@ -749,11 +752,13 @@
devid = e->devid;
for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
- if (alias)
+ if (alias) {
amd_iommu_alias_table[dev_i] = devid_to;
- set_dev_entry_from_acpi(iommu,
- amd_iommu_alias_table[dev_i],
- flags, ext_flags);
+ set_dev_entry_from_acpi(iommu,
+ devid_to, flags, ext_flags);
+ }
+ set_dev_entry_from_acpi(iommu, dev_i,
+ flags, ext_flags);
}
break;
default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042..0a1c283 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@
#ifdef CONFIG_X86_X2APIC
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
-static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
if (x2apic_enabled()) {
@@ -149,7 +148,6 @@
return 0;
}
- disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
}
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac..8952a58 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -652,7 +652,8 @@
return ret && es7000_apic_is_cluster();
}
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
.name = "es7000",
.probe = probe_es7000,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216f..d2ed6c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@
return;
}
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
{
- unsigned int v;
- int i, j;
+ int i;
if (apic_verbosity == APIC_QUIET)
return;
- printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
- for (i = 0; i < 8; i++) {
- v = apic_read(base + i*0x10);
- for (j = 0; j < 32; j++) {
- if (v & (1<<j))
- printk("1");
- else
- printk("0");
- }
- printk("\n");
- }
+ printk(KERN_DEBUG);
+
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+ printk(KERN_CONT "\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@
if (apic_verbosity == APIC_QUIET)
return;
- printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+ printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@
printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
printk(KERN_DEBUG "... APIC ISR field:\n");
- print_APIC_bitfield(APIC_ISR);
+ print_APIC_field(APIC_ISR);
printk(KERN_DEBUG "... APIC TMR field:\n");
- print_APIC_bitfield(APIC_TMR);
+ print_APIC_field(APIC_TMR);
printk(KERN_DEBUG "... APIC IRR field:\n");
- print_APIC_bitfield(APIC_IRR);
+ print_APIC_field(APIC_IRR);
if (APIC_INTEGRATED(ver)) { /* !82489DX */
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
@@ -3799,6 +3793,9 @@
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+ if (cfg->move_in_progress)
+ send_cleanup_vector(cfg);
+
return irq;
}
@@ -4187,28 +4184,20 @@
}
}
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
{
int i;
struct resource *r = ioapic_resources;
if (!r) {
- if (nr_ioapics > 0) {
+ if (nr_ioapics > 0)
printk(KERN_ERR
"IO APIC resources couldn't be allocated.\n");
- return -1;
- }
- return 0;
+ return;
}
for (i = 0; i < nr_ioapics; i++) {
insert_resource(&iomem_resource, r);
r++;
}
-
- return 0;
}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 533e59c..ca96e68 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -493,7 +493,8 @@
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm. */
+struct apic __refdata apic_numaq = {
.name = "NUMAQ",
.probe = probe_numaq,
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 8e4cbb2..a5371ec 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -17,11 +17,13 @@
return x2apic_enabled();
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
/*
@@ -170,7 +172,7 @@
static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index a284359..a8989aa 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -27,11 +27,13 @@
return 0;
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
@@ -162,7 +164,7 @@
static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 096d19a..832e908 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -261,7 +261,7 @@
.apic_id_registered = uv_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
- .irq_dest_mode = 1, /* logical */
+ .irq_dest_mode = 0, /* physical */
.target_cpus = uv_target_cpus,
.disable_esr = 0,
@@ -362,12 +362,6 @@
BUG();
}
-static __init void map_low_mmrs(void)
-{
- init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
- init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
enum map_type {map_wb, map_uc};
static __init void map_high(char *id, unsigned long base, int shift,
@@ -395,26 +389,6 @@
map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
}
-static __init void map_config_high(int max_pnode)
-{
- union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
- int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
- if (cfg.s.enable)
- map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
- union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
- int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
- if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
static __init void map_mmioh_high(int max_pnode)
{
union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -566,8 +540,6 @@
unsigned long mmr_base, present, paddr;
unsigned short pnode_mask;
- map_low_mmrs();
-
m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
@@ -591,6 +563,8 @@
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kmalloc(bytes, GFP_KERNEL);
BUG_ON(!uv_blade_info);
+ for (blade = 0; blade < uv_num_possible_blades(); blade++)
+ uv_blade_info[blade].memory_nid = -1;
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
@@ -629,6 +603,9 @@
lcpu = uv_blade_info[blade].nr_possible_cpus;
uv_blade_info[blade].nr_possible_cpus++;
+ /* Any node on the blade, else will contain -1. */
+ uv_blade_info[blade].memory_nid = nid;
+
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
@@ -662,11 +639,10 @@
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
+ max_pnode = max(pnode, max_pnode);
}
map_gru_high(max_pnode);
- map_mmr_high(max_pnode);
- map_config_high(max_pnode);
map_mmioh_high(max_pnode);
uv_cpu_init();
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9..442b550 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -811,7 +811,7 @@
u8 ret = 0;
int idled = 0;
int polling;
- int err;
+ int err = 0;
polling = !!(current_thread_info()->status & TS_POLLING);
if (polling) {
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f59..63fddcd 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -356,7 +356,7 @@
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
/* check CPU config space for extended APIC ID */
- if (c->x86 >= 0xf) {
+ if (cpu_has_apic && c->x86 >= 0xf) {
unsigned int val;
val = read_pci_config(0, 24, 0, 0x68);
if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
@@ -400,6 +400,13 @@
level = cpuid_eax(1);
if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+ /*
+ * Some BIOSes incorrectly force this feature, but only K8
+ * revision D (model = 0x14) and later actually support it.
+ */
+ if (c->x86_model < 0x14)
+ clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
}
if (c->x86 == 0x10 || c->x86 == 0x11)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c0..5ce60a8 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -59,7 +59,30 @@
alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
}
-static const struct cpu_dev *this_cpu __cpuinitdata;
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_64
+ display_cacheinfo(c);
+#else
+ /* Not much we can do here... */
+ /* Check if at least it has cpuid */
+ if (c->cpuid_level == -1) {
+ /* No cpuid. It must be an ancient CPU */
+ if (c->x86 == 4)
+ strcpy(c->x86_model_id, "486");
+ else if (c->x86 == 3)
+ strcpy(c->x86_model_id, "386");
+ }
+#endif
+}
+
+static const struct cpu_dev __cpuinitconst default_cpu = {
+ .c_init = default_init,
+ .c_vendor = "Unknown",
+ .c_x86_vendor = X86_VENDOR_UNKNOWN,
+};
+
+static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
#ifdef CONFIG_X86_64
@@ -332,29 +355,6 @@
static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
- display_cacheinfo(c);
-#else
- /* Not much we can do here... */
- /* Check if at least it has cpuid */
- if (c->cpuid_level == -1) {
- /* No cpuid. It must be an ancient CPU */
- if (c->x86 == 4)
- strcpy(c->x86_model_id, "486");
- else if (c->x86 == 3)
- strcpy(c->x86_model_id, "386");
- }
-#endif
-}
-
-static const struct cpu_dev __cpuinitconst default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
- .c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64..2a50ef8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@
static int transition_fid_vid(struct powernow_k8_data *data,
u32 reqfid, u32 reqvid)
{
- if (core_voltage_pre_transition(data, reqvid))
+ if (core_voltage_pre_transition(data, reqvid, reqfid))
return 1;
if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@
/* Phase 1 - core voltage transition ... setup voltage */
static int core_voltage_pre_transition(struct powernow_k8_data *data,
- u32 reqvid)
+ u32 reqvid, u32 reqfid)
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
- u32 maxvid, lo;
+ u32 maxvid, lo, rvomult = 1;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
"reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+ rvomult = 2;
+ rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ while ((rvosteps > 0) &&
+ ((rvomult * data->rvo + data->currvid) > reqvid)) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
@@ -384,13 +388,6 @@
u32 vcoreqfid, vcocurrfid, vcofiddiff;
u32 fid_interval, savevid = data->currvid;
- if ((reqfid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
- "0x%x 0x%x\n", reqfid, data->currfid);
- return 1;
- }
-
if (data->currfid == reqfid) {
printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
data->currfid);
@@ -407,6 +404,9 @@
vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
: vcoreqfid - vcocurrfid;
+ if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+ vcofiddiff = 0;
+
while (vcofiddiff > 2) {
(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
@@ -1081,14 +1081,6 @@
return 0;
}
- if ((fid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX
- "ignoring illegal change in lo freq table-%x to 0x%x\n",
- data->currfid, fid);
- return 1;
- }
-
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@
{
static const char ACPI_PSS_BIOS_BUG_MSG[] =
KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
- KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
struct init_on_cpu init_on_cpu;
int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190..02ce824 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+ u32 reqvid, u32 regfid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 20d4983..14ce5d4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@
m->cs, m->ip);
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
printk(KERN_EMERG "TSC %llx ", m->tsc);
if (m->addr)
- printk("ADDR %llx ", m->addr);
+ printk(KERN_CONT "ADDR %llx ", m->addr);
if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
+ printk(KERN_CONT "MISC %llx ", m->misc);
+ printk(KERN_CONT "\n");
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
@@ -209,13 +209,13 @@
static void print_mce_head(void)
{
- printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+ printk(KERN_EMERG "\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1692,17 +1692,15 @@
const char *buf, size_t siz)
{
char *p;
- int len;
strncpy(mce_helper, buf, sizeof(mce_helper));
mce_helper[sizeof(mce_helper)-1] = 0;
- len = strlen(mce_helper);
p = strchr(mce_helper, '\n');
- if (*p)
+ if (p)
*p = 0;
- return len;
+ return strlen(mce_helper) + !!p;
}
static ssize_t set_ignore_ce(struct sys_device *s,
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index bff8dd1..8bc64cf 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -36,6 +36,7 @@
static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+static DEFINE_PER_CPU(bool, thermal_throttle_active);
static atomic_t therm_throt_en = ATOMIC_INIT(0);
@@ -96,24 +97,27 @@
{
unsigned int cpu = smp_processor_id();
__u64 tmp_jiffs = get_jiffies_64();
+ bool was_throttled = __get_cpu_var(thermal_throttle_active);
+ bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
- if (curr)
+ if (is_throttled)
__get_cpu_var(thermal_throttle_count)++;
- if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+ if (!(was_throttled ^ is_throttled) &&
+ time_before64(tmp_jiffs, __get_cpu_var(next_check)))
return 0;
__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
/* if we just entered the thermal event */
- if (curr) {
+ if (is_throttled) {
printk(KERN_CRIT "CPU%d: Temperature above threshold, "
- "cpu clock throttled (total events = %lu)\n", cpu,
- __get_cpu_var(thermal_throttle_count));
+ "cpu clock throttled (total events = %lu)\n",
+ cpu, __get_cpu_var(thermal_throttle_count));
add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+ } else if (was_throttled) {
+ printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
}
return 1;
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 13bd6d6..3d4ebbd 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -55,6 +55,7 @@
int num_counters_fixed;
int counter_bits;
u64 counter_mask;
+ int apic;
u64 max_period;
u64 intel_ctrl;
};
@@ -66,6 +67,52 @@
};
/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0079,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x012e,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+ return p6_perfmon_event_map[event];
+}
+
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER 0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL
+#define P6_EVNTSEL_INV_MASK 0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK 0xFF000000ULL
+
+#define P6_EVNTSEL_MASK \
+ (P6_EVNTSEL_EVENT_MASK | \
+ P6_EVNTSEL_UNIT_MASK | \
+ P6_EVNTSEL_EDGE_MASK | \
+ P6_EVNTSEL_INV_MASK | \
+ P6_EVNTSEL_COUNTER_MASK)
+
+ return event & P6_EVNTSEL_MASK;
+}
+
+
+/*
* Intel PerfMon v3. Used on Core2 and later.
*/
static const u64 intel_perfmon_event_map[] =
@@ -567,6 +614,7 @@
static bool reserve_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -581,9 +629,11 @@
if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
goto eventsel_fail;
}
+#endif
return true;
+#ifdef CONFIG_X86_LOCAL_APIC
eventsel_fail:
for (i--; i >= 0; i--)
release_evntsel_nmi(x86_pmu.eventsel + i);
@@ -598,10 +648,12 @@
enable_lapic_nmi_watchdog();
return false;
+#endif
}
static void release_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
for (i = 0; i < x86_pmu.num_counters; i++) {
@@ -611,6 +663,7 @@
if (nmi_watchdog == NMI_LOCAL_APIC)
enable_lapic_nmi_watchdog();
+#endif
}
static void hw_perf_counter_destroy(struct perf_counter *counter)
@@ -666,6 +719,7 @@
{
struct perf_counter_attr *attr = &counter->attr;
struct hw_perf_counter *hwc = &counter->hw;
+ u64 config;
int err;
if (!x86_pmu_initialized())
@@ -701,6 +755,15 @@
hwc->sample_period = x86_pmu.max_period;
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
+ } else {
+ /*
+ * If we have a PMU initialized but no APIC
+ * interrupts, we cannot sample hardware
+ * counters (user-space has to fall back and
+ * sample via a hrtimer based software counter):
+ */
+ if (!x86_pmu.apic)
+ return -EOPNOTSUPP;
}
counter->destroy = hw_perf_counter_destroy;
@@ -718,14 +781,40 @@
if (attr->config >= x86_pmu.max_events)
return -EINVAL;
+
/*
* The generic map:
*/
- hwc->config |= x86_pmu.event_map(attr->config);
+ config = x86_pmu.event_map(attr->config);
+
+ if (config == 0)
+ return -ENOENT;
+
+ if (config == -1LL)
+ return -EINVAL;
+
+ hwc->config |= config;
return 0;
}
+static void p6_pmu_disable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_disable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
@@ -767,6 +856,23 @@
return x86_pmu.disable_all();
}
+static void p6_pmu_enable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ unsigned long val;
+
+ if (cpuc->enabled)
+ return;
+
+ cpuc->enabled = 1;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_enable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
@@ -784,13 +890,13 @@
barrier();
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ struct perf_counter *counter = cpuc->counters[idx];
u64 val;
if (!test_bit(idx, cpuc->active_mask))
continue;
- rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
- if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
- continue;
+
+ val = counter->hw.config;
val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
}
@@ -819,16 +925,13 @@
static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
+ (void)checking_wrmsrl(hwc->config_base + idx,
hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
}
static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
- hwc->config);
+ (void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
}
static inline void
@@ -836,13 +939,24 @@
{
int idx = __idx - X86_PMC_IDX_FIXED;
u64 ctrl_val, mask;
- int err;
mask = 0xfULL << (idx * 4);
rdmsrl(hwc->config_base, ctrl_val);
ctrl_val &= ~mask;
- err = checking_wrmsrl(hwc->config_base, ctrl_val);
+ (void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val = P6_NOP_COUNTER;
+
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
}
static inline void
@@ -943,6 +1057,19 @@
err = checking_wrmsrl(hwc->config_base, ctrl_val);
}
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ val = hwc->config;
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
@@ -959,8 +1086,6 @@
if (cpuc->enabled)
x86_pmu_enable_counter(hwc, idx);
- else
- x86_pmu_disable_counter(hwc, idx);
}
static int
@@ -1176,6 +1301,49 @@
local_irq_restore(flags);
}
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+ struct perf_sample_data data;
+ struct cpu_hw_counters *cpuc;
+ struct perf_counter *counter;
+ struct hw_perf_counter *hwc;
+ int idx, handled = 0;
+ u64 val;
+
+ data.regs = regs;
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_counters);
+
+ for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ counter = cpuc->counters[idx];
+ hwc = &counter->hw;
+
+ val = x86_perf_counter_update(counter, hwc, idx);
+ if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+ continue;
+
+ /*
+ * counter overflow
+ */
+ handled = 1;
+ data.period = counter->hw.last_period;
+
+ if (!x86_perf_counter_set_period(counter, hwc, idx))
+ continue;
+
+ if (perf_counter_overflow(counter, 1, &data))
+ p6_pmu_disable_counter(hwc, idx);
+ }
+
+ if (handled)
+ inc_irq_stat(apic_perf_irqs);
+
+ return handled;
+}
/*
* This handler is triggered by the local APIC, so the APIC IRQ handling
@@ -1185,14 +1353,13 @@
{
struct perf_sample_data data;
struct cpu_hw_counters *cpuc;
- int bit, cpu, loops;
+ int bit, loops;
u64 ack, status;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
perf_disable();
status = intel_pmu_get_status();
@@ -1249,14 +1416,13 @@
struct cpu_hw_counters *cpuc;
struct perf_counter *counter;
struct hw_perf_counter *hwc;
- int cpu, idx, handled = 0;
+ int idx, handled = 0;
u64 val;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
if (!test_bit(idx, cpuc->active_mask))
@@ -1299,18 +1465,22 @@
void set_perf_counter_pending(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
}
void perf_counters_lapic_init(void)
{
- if (!x86_pmu_initialized())
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (!x86_pmu.apic || !x86_pmu_initialized())
return;
/*
* Always use NMI for PMU
*/
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
}
static int __kprobes
@@ -1334,7 +1504,9 @@
regs = args->regs;
+#ifdef CONFIG_X86_LOCAL_APIC
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
/*
* Can't rely on the handled return value to say it was our NMI, two
* counters could trigger 'simultaneously' raising two back-to-back NMIs.
@@ -1353,6 +1525,33 @@
.priority = 1
};
+static struct x86_pmu p6_pmu = {
+ .name = "p6",
+ .handle_irq = p6_pmu_handle_irq,
+ .disable_all = p6_pmu_disable_all,
+ .enable_all = p6_pmu_enable_all,
+ .enable = p6_pmu_enable_counter,
+ .disable = p6_pmu_disable_counter,
+ .eventsel = MSR_P6_EVNTSEL0,
+ .perfctr = MSR_P6_PERFCTR0,
+ .event_map = p6_pmu_event_map,
+ .raw_event = p6_pmu_raw_event,
+ .max_events = ARRAY_SIZE(p6_perfmon_event_map),
+ .apic = 1,
+ .max_period = (1ULL << 31) - 1,
+ .version = 0,
+ .num_counters = 2,
+ /*
+ * Counters have 40 bits implemented. However they are designed such
+ * that bits [32-39] are sign extensions of bit 31. As such the
+ * effective width of a counter for P6-like PMU is 32 bits only.
+ *
+ * See IA-32 Intel Architecture Software developer manual Vol 3B
+ */
+ .counter_bits = 32,
+ .counter_mask = (1ULL << 32) - 1,
+};
+
static struct x86_pmu intel_pmu = {
.name = "Intel",
.handle_irq = intel_pmu_handle_irq,
@@ -1365,6 +1564,7 @@
.event_map = intel_pmu_event_map,
.raw_event = intel_pmu_raw_event,
.max_events = ARRAY_SIZE(intel_perfmon_event_map),
+ .apic = 1,
/*
* Intel PMCs cannot be accessed sanely above 32 bit width,
* so we install an artificial 1<<31 period regardless of
@@ -1388,10 +1588,43 @@
.num_counters = 4,
.counter_bits = 48,
.counter_mask = (1ULL << 48) - 1,
+ .apic = 1,
/* use highest bit to detect overflow */
.max_period = (1ULL << 47) - 1,
};
+static int p6_pmu_init(void)
+{
+ switch (boot_cpu_data.x86_model) {
+ case 1:
+ case 3: /* Pentium Pro */
+ case 5:
+ case 6: /* Pentium II */
+ case 7:
+ case 8:
+ case 11: /* Pentium III */
+ break;
+ case 9:
+ case 13:
+ /* Pentium M */
+ break;
+ default:
+ pr_cont("unsupported p6 CPU model %d ",
+ boot_cpu_data.x86_model);
+ return -ENODEV;
+ }
+
+ x86_pmu = p6_pmu;
+
+ if (!cpu_has_apic) {
+ pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+ pr_info("no hardware sampling interrupt available.\n");
+ x86_pmu.apic = 0;
+ }
+
+ return 0;
+}
+
static int intel_pmu_init(void)
{
union cpuid10_edx edx;
@@ -1400,8 +1633,14 @@
unsigned int ebx;
int version;
- if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ /* check for P6 processor family */
+ if (boot_cpu_data.x86 == 6) {
+ return p6_pmu_init();
+ } else {
return -ENODEV;
+ }
+ }
/*
* Check whether the Architectural PerfMon supports
@@ -1561,6 +1800,7 @@
static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
static void
@@ -1576,7 +1816,9 @@
static int backtrace_stack(void *data, char *name)
{
- /* Process all stacks: */
+ per_cpu(in_nmi_frame, smp_processor_id()) =
+ x86_is_stack_id(NMI_STACK, name);
+
return 0;
}
@@ -1584,6 +1826,9 @@
{
struct perf_callchain_entry *entry = data;
+ if (per_cpu(in_nmi_frame, smp_processor_id()))
+ return;
+
if (reliable)
callchain_store(entry, addr);
}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6..e60ed74 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@
wd_ops->rearm(wd, nmi_hz);
return 1;
}
-
-int lapic_watchdog_ok(void)
-{
- return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1..bca5fba 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
#include "dumpstack.h"
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+ return 0;
+}
+
void dump_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp,
const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db59..54b0a32 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
#include "dumpstack.h"
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
- unsigned *usedp, char **idp)
-{
- static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
[DEBUG_STACK - 1] = "#DB",
[NMI_STACK - 1] = "NMI",
[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@
N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
};
+
+int x86_is_stack_id(int id, char *name)
+{
+ return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+ unsigned *usedp, char **idp)
+{
unsigned k;
/*
@@ -61,7 +68,7 @@
if (*usedp & (1U << k))
break;
*usedp |= 1U << k;
- *idp = ids[k];
+ *idp = x86_stack_ids[k];
return (unsigned long *)end;
}
/*
@@ -81,12 +88,13 @@
do {
++j;
end -= EXCEPTION_STKSZ;
- ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+ x86_stack_ids[j][4] = '1' +
+ (j - N_EXCEPTION_STACKS);
} while (stack < end - EXCEPTION_STKSZ);
if (*usedp & (1U << j))
break;
*usedp |= 1U << j;
- *idp = ids[j];
+ *idp = x86_stack_ids[j];
return (unsigned long *)end;
}
#endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index c4ca89d..5cb5725 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 96f7ac0..fe26ba3 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -354,7 +354,7 @@
*/
c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2);
if (c16) {
- for (i = 0; i < sizeof(vendor) && *c16; ++i)
+ for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = *c16++;
vendor[i] = '\0';
} else
@@ -512,7 +512,7 @@
&& end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
- va = efi_ioremap(md->phys_addr, size);
+ va = efi_ioremap(md->phys_addr, size, md->type);
md->virt_addr = (u64) (unsigned long) va;
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 22c3b78..ac0621a 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -98,10 +98,14 @@
early_runtime_code_mapping_set_exec(0);
}
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+ u32 type)
{
unsigned long last_map_pfn;
+ if (type == EFI_MEMORY_MAPPED_IO)
+ return ioremap(phys_addr, size);
+
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8663afb..0d98a01 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -602,7 +602,11 @@
#endif
iret
-.section .cpuinit.data,"wa"
+#ifndef CONFIG_HOTPLUG_CPU
+ __CPUINITDATA
+#else
+ __REFDATA
+#endif
.align 4
ENTRY(initial_code)
.long i386_start_kernel
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e4..92b7703 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@
#ifdef CONFIG_X86_THERMAL_VECTOR
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
#endif
#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad..c664d51 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@
state->mode = paravirt_get_lazy_mode();
}
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b..2a62d84 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
.name = "mfgpt-timer"
};
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f90..d2e56b8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@
nommu:
/* Should not happen anymore */
printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_WARNING "falling back to iommu=soft.\n");
+ "falling back to iommu=soft.\n");
return -1;
}
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 4f9c55f..03801f2 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -60,7 +60,7 @@
"adc %5,%%edx ; "
: "=A" (product), "=r" (tmp1), "=r" (tmp2)
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
__asm__ (
"mul %%rdx ; shrd $32,%%rdx,%%rax"
: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8..a06e8d1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/efi.h>
+#include <linux/dmi.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
@@ -17,7 +18,6 @@
#include <asm/cpu.h>
#ifdef CONFIG_X86_32
-# include <linux/dmi.h>
# include <linux/ctype.h>
# include <linux/mc146818rtc.h>
#else
@@ -249,6 +249,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
},
},
+ { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+ .callback = set_bios_reboot,
+ .ident = "CompuLab SBC-FITPC2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+ },
+ },
{ }
};
@@ -396,6 +404,46 @@
#endif /* CONFIG_X86_32 */
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_CF9) {
+ reboot_type = BOOT_CF9;
+ printk(KERN_INFO "%s series board detected. "
+ "Selecting PCI-method for reboots.\n", d->ident);
+ }
+ return 0;
+}
+
+static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
+ { /* Handle problems with rebooting on Apple MacBook5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBook5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
+ },
+ },
+ { /* Handle problems with rebooting on Apple MacBookPro5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBookPro5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
+ },
+ },
+ { }
+};
+
+static int __init pci_reboot_init(void)
+{
+ dmi_check_system(pci_reboot_dmi_table);
+ return 0;
+}
+core_initcall(pci_reboot_init);
+
static inline void kb_wait(void)
{
int i;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab1..63f32d2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -672,6 +672,19 @@
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
+ {
+ /*
+ * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+ * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * match only DMI_BOARD_NAME and see if there is more bad products
+ * with this vendor.
+ */
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+ },
+ },
#endif
{}
};
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 7501bb1..a26ff61 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -177,7 +177,7 @@
}
/* allocate and build unit_map */
- unit_map_size = num_possible_cpus() * sizeof(int);
+ unit_map_size = nr_cpu_ids * sizeof(int);
unit_map = alloc_bootmem_nopanic(unit_map_size);
if (!unit_map) {
pr_warning("PERCPU: failed to allocate unit_map\n");
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 6e1a368..71f4368 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -275,15 +275,20 @@
* use the TSC value at the transitions to calculate a pretty
* good value for the TSC frequencty.
*/
+static inline int pit_verify_msb(unsigned char val)
+{
+ /* Ignore LSB */
+ inb(0x42);
+ return inb(0x42) == val;
+}
+
static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
int count;
u64 tsc = 0;
for (count = 0; count < 50000; count++) {
- /* Ignore LSB */
- inb(0x42);
- if (inb(0x42) != val)
+ if (!pit_verify_msb(val))
break;
tsc = get_cycles();
}
@@ -336,8 +341,7 @@
* to do that is to just read back the 16-bit counter
* once from the PIT.
*/
- inb(0x42);
- inb(0x42);
+ pit_verify_msb(0);
if (pit_expect_msb(0xff, &tsc, &d1)) {
for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
@@ -348,8 +352,19 @@
* Iterate until the error is less than 500 ppm
*/
delta -= tsc;
- if (d1+d2 < delta >> 11)
- goto success;
+ if (d1+d2 >= delta >> 11)
+ continue;
+
+ /*
+ * Check the PIT one more time to verify that
+ * all TSC reads were stable wrt the PIT.
+ *
+ * This also guarantees serialization of the
+ * last cycle read ('d2') in pit_expect_msb.
+ */
+ if (!pit_verify_msb(0xfe - i))
+ break;
+ goto success;
}
}
printk("Fast TSC calibration failed\n");
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b263423..95a7289 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -441,7 +441,7 @@
ap.ds = __USER_DS;
ap.es = __USER_DS;
ap.fs = __KERNEL_PERCPU;
- ap.gs = 0;
+ ap.gs = __KERNEL_STACK_CANARY;
ap.eflags = 0;
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index b600c84..bbf4fd0 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,11 +112,6 @@
_sdata = .;
DATA_DATA
CONSTRUCTORS
-
-#ifdef CONFIG_X86_64
- /* End of data section */
- _edata = .;
-#endif
} :data
#ifdef CONFIG_X86_32
@@ -156,10 +151,8 @@
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
-#ifdef CONFIG_X86_32
/* End of data section */
_edata = .;
-#endif
}
#ifdef CONFIG_X86_64
@@ -397,8 +390,8 @@
#ifdef CONFIG_X86_32
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#else
/*
* Per-cpu symbols which need to be offset from __per_cpu_load
@@ -411,12 +404,12 @@
/*
* Build-time check on the image size:
*/
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
+. = ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
#endif
#endif /* CONFIG_X86_32 */
@@ -424,7 +417,7 @@
#ifdef CONFIG_KEXEC
#include <asm/kexec.h>
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
+. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big");
#endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4d6f0d2..21f68e0 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -104,6 +104,9 @@
ktime_t remaining;
struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+ if (!ps->pit_timer.period)
+ return 0;
+
/*
* The Counter does not stop when it reaches zero. In
* Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7030b5f..0ef5bb2 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -489,16 +489,20 @@
*
* If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc
* containing more mappings.
+ *
+ * Returns the number of rmap entries before the spte was added or zero if
+ * the spte was not added.
+ *
*/
-static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
{
struct kvm_mmu_page *sp;
struct kvm_rmap_desc *desc;
unsigned long *rmapp;
- int i;
+ int i, count = 0;
if (!is_rmap_pte(*spte))
- return;
+ return count;
gfn = unalias_gfn(vcpu->kvm, gfn);
sp = page_header(__pa(spte));
sp->gfns[spte - sp->spt] = gfn;
@@ -515,8 +519,10 @@
} else {
rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
- while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+ while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
desc = desc->more;
+ count += RMAP_EXT;
+ }
if (desc->shadow_ptes[RMAP_EXT-1]) {
desc->more = mmu_alloc_rmap_desc(vcpu);
desc = desc->more;
@@ -525,6 +531,7 @@
;
desc->shadow_ptes[i] = spte;
}
+ return count;
}
static void rmap_desc_remove_entry(unsigned long *rmapp,
@@ -754,6 +761,19 @@
return young;
}
+#define RMAP_RECYCLE_THRESHOLD 1000
+
+static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+{
+ unsigned long *rmapp;
+
+ gfn = unalias_gfn(vcpu->kvm, gfn);
+ rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+
+ kvm_unmap_rmapp(vcpu->kvm, rmapp);
+ kvm_flush_remote_tlbs(vcpu->kvm);
+}
+
int kvm_age_hva(struct kvm *kvm, unsigned long hva)
{
return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
@@ -1407,24 +1427,25 @@
*/
void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
{
+ int used_pages;
+
+ used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
+ used_pages = max(0, used_pages);
+
/*
* If we set the number of mmu pages to be smaller be than the
* number of actived pages , we must to free some mmu pages before we
* change the value
*/
- if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) >
- kvm_nr_mmu_pages) {
- int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages
- - kvm->arch.n_free_mmu_pages;
-
- while (n_used_mmu_pages > kvm_nr_mmu_pages) {
+ if (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(kvm, page);
- n_used_mmu_pages--;
+ used_pages--;
}
kvm->arch.n_free_mmu_pages = 0;
}
@@ -1740,6 +1761,7 @@
{
int was_rmapped = 0;
int was_writeble = is_writeble_pte(*shadow_pte);
+ int rmap_count;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
@@ -1781,9 +1803,11 @@
page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
if (!was_rmapped) {
- rmap_add(vcpu, shadow_pte, gfn, largepage);
+ rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
if (!is_rmap_pte(*shadow_pte))
kvm_release_pfn_clean(pfn);
+ if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+ rmap_recycle(vcpu, gfn, largepage);
} else {
if (was_writeble)
kvm_release_pfn_dirty(pfn);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 71510e0..b1f658a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -711,6 +711,7 @@
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
+ svm->asid_generation = 0;
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
@@ -1031,7 +1032,6 @@
svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
}
- svm->vcpu.cpu = svm_data->cpu;
svm->asid_generation = svm_data->asid_generation;
svm->vmcb->control.asid = svm_data->next_asid++;
}
@@ -2300,8 +2300,8 @@
struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
- if (svm->vcpu.cpu != cpu ||
- svm->asid_generation != svm_data->asid_generation)
+ /* FIXME: handle wraparound of asid_generation */
+ if (svm->asid_generation != svm_data->asid_generation)
new_asid(svm, svm_data);
}
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 356a0ce..29f9129 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3157,8 +3157,8 @@
struct vcpu_vmx *vmx = to_vmx(vcpu);
enum emulation_result err = EMULATE_DONE;
- preempt_enable();
local_irq_enable();
+ preempt_enable();
while (!guest_state_valid(vcpu)) {
err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
@@ -3168,7 +3168,7 @@
if (err != EMULATE_DONE) {
kvm_report_emulation_failure(vcpu, "emulation failure");
- return;
+ break;
}
if (signal_pending(current))
@@ -3177,8 +3177,8 @@
schedule();
}
- local_irq_disable();
preempt_disable();
+ local_irq_disable();
vmx->invalid_state_emulation_result = err;
}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fe5474a..3d45290 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -704,11 +704,48 @@
return false;
}
+static bool valid_pat_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
+}
+
+static bool valid_mtrr_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
+}
+
+static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ int i;
+
+ if (!msr_mtrr_valid(msr))
+ return false;
+
+ if (msr == MSR_IA32_CR_PAT) {
+ for (i = 0; i < 8; i++)
+ if (!valid_pat_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ } else if (msr == MSR_MTRRdefType) {
+ if (data & ~0xcff)
+ return false;
+ return valid_mtrr_type(data & 0xff);
+ } else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) {
+ for (i = 0; i < 8 ; i++)
+ if (!valid_mtrr_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ }
+
+ /* variable MTRRs */
+ return valid_mtrr_type(data & 0xff);
+}
+
static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges;
- if (!msr_mtrr_valid(msr))
+ if (!mtrr_valid(vcpu, msr, data))
return 1;
if (msr == MSR_MTRRdefType) {
@@ -1079,14 +1116,13 @@
if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
goto out;
r = -E2BIG;
- if (n < num_msrs_to_save)
+ if (n < msr_list.nmsrs)
goto out;
r = -EFAULT;
if (copy_to_user(user_msr_list->indices, &msrs_to_save,
num_msrs_to_save * sizeof(u32)))
goto out;
- if (copy_to_user(user_msr_list->indices
- + num_msrs_to_save * sizeof(u32),
+ if (copy_to_user(user_msr_list->indices + num_msrs_to_save,
&emulated_msrs,
ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
goto out;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7bc65f0..d677fa9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
*
* So how does the kernel know it's a Guest? We'll see that later, but let's
* just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
/*
* Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
*
* The Guest in our tale is a simple creature: identical to the Host but
* behaving in simplified but equivalent ways. In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
struct lguest_data lguest_data = {
.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@
.syscall_vec = SYSCALL_VECTOR,
};
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
* do a normal hypercall. Each entry in the ring has 5 slots for the hypercall
* arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@
* If we come around to a slot which hasn't been finished, then the table is
* full and we just make the hypercall directly. This has the nice side
* effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
static void async_hcall(unsigned long call, unsigned long arg1,
unsigned long arg2, unsigned long arg3,
unsigned long arg4)
@@ -103,9 +107,11 @@
static unsigned int next_call;
unsigned long flags;
- /* Disable interrupts if not already disabled: we don't want an
+ /*
+ * Disable interrupts if not already disabled: we don't want an
* interrupt handler making a hypercall while we're already doing
- * one! */
+ * one!
+ */
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@
local_irq_restore(flags);
}
-/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall(). This is our first real
+ * optimization trick!
*
* When lazy_mode is set, it means we're allowed to defer all hypercalls and do
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
@@ -136,7 +143,8 @@
* lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
static void lazy_hcall1(unsigned long call,
unsigned long arg1)
{
@@ -146,6 +154,7 @@
async_hcall(call, arg1, 0, 0, 0);
}
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
static void lazy_hcall2(unsigned long call,
unsigned long arg1,
unsigned long arg2)
@@ -181,8 +190,10 @@
}
#endif
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
static void lguest_leave_lazy_mmu_mode(void)
{
kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -208,9 +219,11 @@
* check there before it tries to deliver an interrupt.
*/
-/* save_flags() is expected to return the processor state (ie. "flags"). The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags"). The
* flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag. Our "save_flags()" just returns that. */
+ * about the interrupt flag. Our "save_flags()" just returns that.
+ */
static unsigned long save_fl(void)
{
return lguest_data.irq_enabled;
@@ -222,13 +235,15 @@
lguest_data.irq_enabled = 0;
}
-/* Let's pause a moment. Remember how I said these are called so often?
+/*
+ * Let's pause a moment. Remember how I said these are called so often?
* Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
* break some rules. In particular, these functions are assumed to save their
* own registers if they need to: normal C functions assume they can trash the
* eax register. To use normal C functions, we use
* PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
PV_CALLEE_SAVE_REGS_THUNK(save_fl);
PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
/*:*/
@@ -237,18 +252,18 @@
extern void lg_irq_enable(void);
extern void lg_restore_fl(unsigned long flags);
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt). This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch. One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled. There will then be a page fault as soon as
+ * interrupts are re-enabled.
*
* A better method is to implement soft interrupt disable generally for x86:
* instead of disabling interrupts, we set a flag. If an interrupt does come
* in, we then disable them for real. This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
/*G:034
* The Interrupt Descriptor Table (IDT).
@@ -261,10 +276,12 @@
static void lguest_write_idt_entry(gate_desc *dt,
int entrynum, const gate_desc *g)
{
- /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+ /*
+ * The gate_desc structure is 8 bytes long: we hand it to the Host in
* two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
* around like this; typesafety wasn't a big concern in Linux's early
- * years. */
+ * years.
+ */
u32 *desc = (u32 *)g;
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +289,11 @@
kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
}
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
* time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
static void lguest_load_idt(const struct desc_ptr *desc)
{
unsigned int i;
@@ -305,9 +324,11 @@
kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
* then tell the Host to reload the entire thing. This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
const void *desc, int type)
{
@@ -317,29 +338,36 @@
dt[entrynum].a, dt[entrynum].b);
}
-/* OK, I lied. There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied. There are three "thread local storage" GDT entries which change
* on every context switch (these three entries are how glibc implements
- * __thread variables). So we have a hypercall specifically for this case. */
+ * __thread variables). So we have a hypercall specifically for this case.
+ */
static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
{
- /* There's one problem which normal hardware doesn't have: the Host
+ /*
+ * There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
- * the GS register here: if it's needed it'll be reloaded anyway. */
+ * the GS register here: if it's needed it'll be reloaded anyway.
+ */
lazy_load_gs(0);
lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
}
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
*
* This is the Local Descriptor Table, another weird Intel thingy. Linux only
* uses this for some strange applications like Wine. We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
static void lguest_set_ldt(const void *addr, unsigned entries)
{
}
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
* structure called the Task State Segment. Some comments scattered though the
* kernel code indicate that this used for task switching in ages past, along
* with blood sacrifice and astrology.
@@ -347,19 +375,21 @@
* Now there's nothing interesting in here that we don't get told elsewhere.
* But the native version uses the "ltr" instruction, which makes the Host
* complain to the Guest about a Segmentation Fault and it'll oops. So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
static void lguest_load_tr_desc(void)
{
}
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
* (manufacturer, model, etc) and its features. It was introduced before the
* Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
* As you might imagine, after a decade and a half this treatment, it is now a
* giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
*
* This instruction even it has its own Wikipedia entry. The Wikipedia entry
- * has been translated into 4 languages. I am not making this up!
+ * has been translated into 5 languages. I am not making this up!
*
* We could get funky here and identify ourselves as "GenuineLguest", but
* instead we just use the real "cpuid" instruction. Then I pretty much turned
@@ -371,7 +401,8 @@
* Replacing the cpuid so we can turn features off is great for the kernel, but
* anyone (including userspace) can just use the raw "cpuid" instruction and
* the Host won't even notice since it isn't privileged. So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
@@ -379,38 +410,63 @@
native_cpuid(ax, bx, cx, dx);
switch (function) {
- case 1: /* Basic feature request. */
- /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+ /*
+ * CPUID 0 gives the highest legal CPUID number (and the ID string).
+ * We futureproof our code a little by sticking to known CPUID values.
+ */
+ case 0:
+ if (*ax > 5)
+ *ax = 5;
+ break;
+
+ /*
+ * CPUID 1 is a basic feature request.
+ *
+ * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+ * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+ */
+ case 1:
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
*dx &= 0x07808151;
- /* The Host can do a nice optimization if it knows that the
+ /*
+ * The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
* flush_tlb_user() for both user and kernel mappings unless
- * the Page Global Enable (PGE) feature bit is set. */
+ * the Page Global Enable (PGE) feature bit is set.
+ */
*dx |= 0x00002000;
- /* We also lie, and say we're family id 5. 6 or greater
+ /*
+ * We also lie, and say we're family id 5. 6 or greater
* leads to a rdmsr in early_init_intel which we can't handle.
- * Family ID is returned as bits 8-12 in ax. */
+ * Family ID is returned as bits 8-12 in ax.
+ */
*ax &= 0xFFFFF0FF;
*ax |= 0x00000500;
break;
+ /*
+ * 0x80000000 returns the highest Extended Function, so we futureproof
+ * like we do above by limiting it to known fields.
+ */
case 0x80000000:
- /* Futureproof this a little: if they ask how much extended
- * processor information there is, limit it to known fields. */
if (*ax > 0x80000008)
*ax = 0x80000008;
break;
+
+ /*
+ * PAE systems can mark pages as non-executable. Linux calls this the
+ * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+ * Virus Protection). We just switch turn if off here, since we don't
+ * support it.
+ */
case 0x80000001:
- /* Here we should fix nx cap depending on host. */
- /* For this version of PAE, we just clear NX bit. */
*dx &= ~(1 << 20);
break;
}
}
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
* I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
* it. The Host needs to know when the Guest wants to change them, so we have
* a whole series of functions like read_cr0() and write_cr0().
@@ -425,7 +481,8 @@
* name like "FPUTRAP bit" be a little less cryptic?
*
* We store cr0 locally because the Host never changes it. The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
static unsigned long current_cr0;
static void lguest_write_cr0(unsigned long val)
{
@@ -438,18 +495,22 @@
return current_cr0;
}
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
* to use write_cr0() to do it. This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
static void lguest_clts(void)
{
lazy_hcall1(LHCALL_TS, 0);
current_cr0 &= ~X86_CR0_TS;
}
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
* reads. The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
static unsigned long lguest_read_cr2(void)
{
return lguest_data.cr2;
@@ -458,10 +519,12 @@
/* See lguest_set_pte() below. */
static bool cr3_changed = false;
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
* cr0. Keep a local copy, and tell the Host when it changes. The only
* difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
static void lguest_write_cr3(unsigned long cr3)
{
lguest_data.pgdir = cr3;
@@ -506,7 +569,7 @@
* cr3 ---> +---------+
* | --------->+---------+
* | | | PADDR1 |
- * Top-level | | PADDR2 |
+ * Mid-level | | PADDR2 |
* (PMD) page | | |
* | | Lower-level |
* | | (PTE) page |
@@ -526,21 +589,62 @@
* Index into top Index into second Offset within page
* page directory page pagetable page
*
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages. The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper ]
+ * [ Level ]
+ * [ Entries ]
+ * [(PUD Page)]---> +---------+
+ * | --------->+---------+
+ * | | | PADDR1 |
+ * Mid-level | | PADDR2 |
+ * (PMD) page | | |
+ * | | Lower-level |
+ * | | (PTE) page |
+ * | | | |
+ * .... ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into Index into mid Index into lower Offset within page
+ * top entries directory page pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set. Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages. The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
*/
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space. We set the entry then tell the Host the
- * toplevel and address this corresponds to. The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space. Wetell the Host the toplevel and
+ * address this corresponds to. The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
#ifdef CONFIG_X86_PAE
+ /* PAE needs to hand a 64 bit page table entry, so it uses two args. */
lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
ptep->pte_low, ptep->pte_high);
#else
@@ -548,6 +652,7 @@
#endif
}
+/* This is the "set and update" combo-meal-deal version. */
static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
@@ -555,10 +660,13 @@
lguest_pte_update(mm, addr, ptep);
}
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
* to set a middle-level entry when PAE is activated.
+ *
* Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
#ifdef CONFIG_X86_PAE
static void lguest_set_pud(pud_t *pudp, pud_t pudval)
{
@@ -577,8 +685,7 @@
}
#else
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
native_set_pmd(pmdp, pmdval);
@@ -587,7 +694,8 @@
}
#endif
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
* don't know the top level any more. This is useless for us, since we don't
* know which pagetable is changing or what address, so we just tell the Host
* to forget all of them. Fortunately, this is very rare.
@@ -595,7 +703,8 @@
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
* the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
native_set_pte(ptep, pteval);
@@ -604,6 +713,11 @@
}
#ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry. These
+ * versions ensure we update all 64 bits at once.
+ */
static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
{
native_set_pte_atomic(ptep, pte);
@@ -611,19 +725,21 @@
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
native_pte_clear(mm, addr, ptep);
lguest_pte_update(mm, addr, ptep);
}
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
{
lguest_set_pmd(pmdp, __pmd(0));
}
#endif
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
* a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -632,24 +748,29 @@
* called when a valid entry is written, not when it's removed (ie. marked not
* present). Instead, this is where we come when the Guest wants to remove a
* page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
static void lguest_flush_tlb_single(unsigned long addr)
{
/* Simply set it to zero: if it was not, it will fault back in. */
lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
}
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
* This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
static void lguest_flush_tlb_user(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 0);
}
-/* This is called when the kernel page tables have changed. That's not very
+/*
+ * This is called when the kernel page tables have changed. That's not very
* common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
static void lguest_flush_tlb_kernel(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -686,26 +807,38 @@
.unmask = enable_lguest_irq,
};
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
* interrupt (except 128, which is used for system calls), and then tells the
* Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
static void __init lguest_init_IRQ(void)
{
unsigned int i;
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* Some systems map "vectors" to interrupts weirdly. Lguest has
- * a straightforward 1 to 1 mapping, so force that here. */
+ /* Some systems map "vectors" to interrupts weirdly. Not us! */
__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
if (i != SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
- /* This call is required to set up for 4k stacks, where we have
- * separate stacks for hard and soft interrupts. */
+
+ /*
+ * This call is required to set up for 4k stacks, where we have
+ * separate stacks for hard and soft interrupts.
+ */
irq_ctx_init(smp_processor_id());
}
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
void lguest_setup_irq(unsigned int irq)
{
irq_to_desc_alloc_node(irq, 0);
@@ -724,31 +857,39 @@
return lguest_data.time.tv_sec;
}
-/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
* what speed it runs at, or 0 if it's unusable as a reliable clock source.
* This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
static unsigned long lguest_tsc_khz(void)
{
return lguest_data.tsc_khz;
}
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
- /* Since the time is in two parts (seconds and nanoseconds), we risk
+ /*
+ * Since the time is in two parts (seconds and nanoseconds), we risk
* reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
* and getting 99 and 0. As Linux tends to come apart under the stress
- * of time travel, we must be careful: */
+ * of time travel, we must be careful:
+ */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
- /* This read memory barrier tells the compiler and the CPU that
+ /*
+ * This read memory barrier tells the compiler and the CPU that
* this can't be reordered: we have to complete the above
- * before going on. */
+ * before going on.
+ */
rmb();
/* Now we read the nanoseconds part. */
nsec = lguest_data.time.tv_nsec;
@@ -772,9 +913,11 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
static int lguest_clockevent_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
@@ -824,8 +967,10 @@
.max_delta_ns = LG_CLOCK_MAX_DELTA,
};
-/* This is the Guest timer interrupt handler (hardware interrupt 0). We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0). We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned long flags;
@@ -836,10 +981,12 @@
local_irq_restore(flags);
}
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
* infrastructure. The kernel doesn't expect timer interrupts before this, but
* we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
static void lguest_time_init(void)
{
/* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -863,14 +1010,16 @@
* to work. They're pretty simple.
*/
-/* The Guest needs to tell the Host what stack it expects traps to use. For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use. For
* native hardware, this is part of the Task State Segment mentioned above in
* lguest_load_tr_desc(), but to help hypervisors there's this special call.
*
* We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
* segment), the privilege level (we're privilege level 1, the Host is 0 and
* will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
static void lguest_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
@@ -884,7 +1033,8 @@
/* FIXME: Implement */
}
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
* caught in the cache (that they've all reached real hardware devices). This
* doesn't matter for the Guest which has virtual hardware.
*
@@ -898,11 +1048,13 @@
{
}
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
* we play dumb by ignoring writes and returning 0 for reads. So it's no
* longer Programmable nor Controlling anything, and I don't think 8 lines of
* code qualifies for Advanced. It will also never interrupt anything. It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
#ifdef CONFIG_X86_LOCAL_APIC
static void lguest_apic_write(u32 reg, u32 v)
{
@@ -951,11 +1103,13 @@
kvm_hypercall0(LHCALL_HALT);
}
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
* an argument which says whether this to restart (reboot) the Guest or not.
*
* Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
static void lguest_power_off(void)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -986,8 +1140,10 @@
* nice to move it back to lguest_init. Patch welcome... */
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- /* The Linux bootloader header contains an "e820" memory map: the
- * Launcher populated the first entry with our memory limit. */
+ /*
+ *The Linux bootloader header contains an "e820" memory map: the
+ * Launcher populated the first entry with our memory limit.
+ */
e820_add_region(boot_params.e820_map[0].addr,
boot_params.e820_map[0].size,
boot_params.e820_map[0].type);
@@ -996,16 +1152,17 @@
return "LGUEST";
}
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
* but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
static __init int early_put_chars(u32 vtermno, const char *buf, int count)
{
char scratch[17];
unsigned int len = count;
- /* We use a nul-terminated string, so we have to make a copy. Icky,
- * huh? */
+ /* We use a nul-terminated string, so we make a copy. Icky, huh? */
if (len > sizeof(scratch) - 1)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
@@ -1016,8 +1173,10 @@
return len;
}
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
static void lguest_restart(char *reason)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1044,7 +1203,8 @@
* fit comfortably.
*
* First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
/*G:060 We construct a table from the assembler templates: */
static const struct lguest_insns
@@ -1055,9 +1215,11 @@
[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
};
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
* paravirt.c). If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
unsigned long addr, unsigned len)
{
@@ -1069,8 +1231,7 @@
insn_len = lguest_insns[type].end - lguest_insns[type].start;
- /* Similarly if we can't fit replacement (shouldn't happen, but let's
- * be thorough). */
+ /* Similarly if it can't fit (doesn't happen, but let's be thorough). */
if (len < insn_len)
return paravirt_patch_default(type, clobber, ibuf, addr, len);
@@ -1079,22 +1240,28 @@
return insn_len;
}
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest. The various
* pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
__init void lguest_init(void)
{
- /* We're under lguest, paravirt is enabled, and we're running at
- * privilege level 1, not 0 as normal. */
+ /* We're under lguest. */
pv_info.name = "lguest";
+ /* Paravirt is enabled. */
pv_info.paravirt_enabled = 1;
+ /* We're running at privilege level 1, not 0 as normal. */
pv_info.kernel_rpl = 1;
+ /* Everyone except Xen runs with this set. */
pv_info.shared_kernel_pmd = 1;
- /* We set up all the lguest overrides for sensitive operations. These
- * are detailed with the operations themselves. */
+ /*
+ * We set up all the lguest overrides for sensitive operations. These
+ * are detailed with the operations themselves.
+ */
- /* interrupt-related operations */
+ /* Interrupt-related operations */
pv_irq_ops.init_IRQ = lguest_init_IRQ;
pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1102,11 +1269,11 @@
pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
pv_irq_ops.safe_halt = lguest_safe_halt;
- /* init-time operations */
+ /* Setup operations */
pv_init_ops.memory_setup = lguest_memory_setup;
pv_init_ops.patch = lguest_patch;
- /* Intercepts of various cpu instructions */
+ /* Intercepts of various CPU instructions */
pv_cpu_ops.load_gdt = lguest_load_gdt;
pv_cpu_ops.cpuid = lguest_cpuid;
pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1127,7 +1294,7 @@
pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
pv_cpu_ops.end_context_switch = lguest_end_context_switch;
- /* pagetable management */
+ /* Pagetable management */
pv_mmu_ops.write_cr3 = lguest_write_cr3;
pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1149,54 +1316,71 @@
pv_mmu_ops.pte_update_defer = lguest_pte_update;
#ifdef CONFIG_X86_LOCAL_APIC
- /* apic read/write intercepts */
+ /* APIC read/write intercepts */
set_lguest_basic_apic_ops();
#endif
- /* time operations */
+ /* Time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
pv_time_ops.get_tsc_khz = lguest_tsc_khz;
- /* Now is a good time to look at the implementations of these functions
- * before returning to the rest of lguest_init(). */
+ /*
+ * Now is a good time to look at the implementations of these functions
+ * before returning to the rest of lguest_init().
+ */
- /*G:070 Now we've seen all the paravirt_ops, we return to
+ /*G:070
+ * Now we've seen all the paravirt_ops, we return to
* lguest_init() where the rest of the fairly chaotic boot setup
- * occurs. */
+ * occurs.
+ */
- /* The stack protector is a weird thing where gcc places a canary
+ /*
+ * The stack protector is a weird thing where gcc places a canary
* value on the stack and then checks it on return. This file is
* compiled with -fno-stack-protector it, so we got this far without
* problems. The value of the canary is kept at offset 20 from the
* %gs register, so we need to set that up before calling C functions
- * in other files. */
+ * in other files.
+ */
setup_stack_canary_segment(0);
- /* We could just call load_stack_canary_segment(), but we might as
- * call switch_to_new_gdt() which loads the whole table and sets up
- * the per-cpu segment descriptor register %fs as well. */
+
+ /*
+ * We could just call load_stack_canary_segment(), but we might as well
+ * call switch_to_new_gdt() which loads the whole table and sets up the
+ * per-cpu segment descriptor register %fs as well.
+ */
switch_to_new_gdt(0);
- /* As described in head_32.S, we map the first 128M of memory. */
+ /* We actually boot with all memory mapped, but let's say 128MB. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
- /* The Host<->Guest Switcher lives at the top of our address space, and
+ /*
+ * The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
- * it put the answer in lguest_data.reserve_mem */
+ * it put the answer in lguest_data.reserve_mem
+ */
reserve_top_address(lguest_data.reserve_mem);
- /* If we don't initialize the lock dependency checker now, it crashes
- * paravirt_disable_iospace. */
+ /*
+ * If we don't initialize the lock dependency checker now, it crashes
+ * paravirt_disable_iospace.
+ */
lockdep_init();
- /* The IDE code spends about 3 seconds probing for disks: if we reserve
+ /*
+ * The IDE code spends about 3 seconds probing for disks: if we reserve
* all the I/O ports up front it can't get them and so doesn't probe.
* Other device drivers are similar (but less severe). This cuts the
- * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+ * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+ */
paravirt_disable_iospace();
- /* This is messy CPU setup stuff which the native boot code does before
- * start_kernel, so we have to do, too: */
+ /*
+ * This is messy CPU setup stuff which the native boot code does before
+ * start_kernel, so we have to do, too:
+ */
cpu_detect(&new_cpu_data);
/* head.S usually sets up the first capability word, so do it here. */
new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1213,22 +1397,28 @@
acpi_ht = 0;
#endif
- /* We set the preferred console to "hvc". This is the "hypervisor
+ /*
+ * We set the preferred console to "hvc". This is the "hypervisor
* virtual console" driver written by the PowerPC people, which we also
- * adapted for lguest's use. */
+ * adapted for lguest's use.
+ */
add_preferred_console("hvc", 0, NULL);
/* Register our very early console. */
virtio_cons_early_init(early_put_chars);
- /* Last of all, we set the power management poweroff hook to point to
+ /*
+ * Last of all, we set the power management poweroff hook to point to
* the Guest routine to power off, and the reboot hook to our restart
- * routine. */
+ * routine.
+ */
pm_power_off = lguest_power_off;
machine_ops.restart = lguest_restart;
- /* Now we're set up, call i386_start_kernel() in head32.c and we proceed
- * to boot as normal. It never returns. */
+ /*
+ * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+ * to boot as normal. It never returns.
+ */
i386_start_kernel();
}
/*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe..27eac0f 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
* arch/x86/kernel/head_32.S. It expects a boot header, which is created by
* the bootloader (the Launcher in our case).
*
@@ -21,11 +22,14 @@
* data without remembering to subtract __PAGE_OFFSET!
*
* The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
.section .init.text, "ax", @progbits
ENTRY(lguest_entry)
- /* We make the "initialization" hypercall now to tell the Host about
- * us, and also find out where it put our page tables. */
+ /*
+ * We make the "initialization" hypercall now to tell the Host about
+ * us, and also find out where it put our page tables.
+ */
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %ebx
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
- /* Jumps are relative, and we're running __PAGE_OFFSET too low at the
- * moment. */
+ /* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers. These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers. These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
.text
#define LGUEST_PATCH(name, insns...) \
lgstart_##name: insns; lgend_##name:; \
@@ -48,83 +53,103 @@
LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later). If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later). If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
*
* I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages. First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages. First, the routine to
+ * enable interrupts:
+ */
ENTRY(lg_irq_enable)
- /* The reverse of irq_disable, this sets lguest_data.irq_enabled to
- * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+ /*
+ * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+ * X86_EFLAGS_IF (ie. "Interrupts enabled").
+ */
movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
- /* But now we need to check if the Host wants to know: there might have
+ /*
+ * But now we need to check if the Host wants to know: there might have
* been interrupts waiting to be delivered, in which case it will have
* set lguest_data.irq_pending to X86_EFLAGS_IF. If it's not zero, we
- * jump to send_interrupts, otherwise we're done. */
+ * jump to send_interrupts, otherwise we're done.
+ */
testl $0, lguest_data+LGUEST_DATA_irq_pending
jnz send_interrupts
- /* One cool thing about x86 is that you can do many things without using
+ /*
+ * One cool thing about x86 is that you can do many things without using
* a register. In this case, the normal path hasn't needed to save or
- * restore any registers at all! */
+ * restore any registers at all!
+ */
ret
send_interrupts:
- /* OK, now we need a register: eax is used for the hypercall number,
+ /*
+ * OK, now we need a register: eax is used for the hypercall number,
* which is LHCALL_SEND_INTERRUPTS.
*
* We used not to bother with this pending detection at all, which was
* much simpler. Sooner or later the Host would realize it had to
* send us an interrupt. But that turns out to make performance 7
* times worse on a simple tcp benchmark. So now we do this the hard
- * way. */
+ * way.
+ */
pushl %eax
movl $LHCALL_SEND_INTERRUPTS, %eax
- /* This is a vmcall instruction (same thing that KVM uses). Older
+ /*
+ * This is a vmcall instruction (same thing that KVM uses). Older
* assembler versions might not know the "vmcall" instruction, so we
- * create one manually here. */
+ * create one manually here.
+ */
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+ /* Put eax back the way we found it. */
popl %eax
ret
-/* Finally, the "popf" or "restore flags" routine. The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine. The %eax register holds the
* flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
ENTRY(lg_restore_fl)
/* This is just "lguest_data.irq_enabled = flags;" */
movl %eax, lguest_data+LGUEST_DATA_irq_enabled
- /* Now, if the %eax value has enabled interrupts and
+ /*
+ * Now, if the %eax value has enabled interrupts and
* lguest_data.irq_pending is set, we want to tell the Host so it can
* deliver any outstanding interrupts. Fortunately, both values will
* be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
* instruction will AND them together for us. If both are set, we
- * jump to send_interrupts. */
+ * jump to send_interrupts.
+ */
testl lguest_data+LGUEST_DATA_irq_pending, %eax
jnz send_interrupts
/* Again, the normal path has used no extra registers. Clever, huh? */
ret
+/*:*/
/* These demark the EIP range where host should never deliver interrupts. */
.global lguest_noirq_start
.global lguest_noirq_end
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it. However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it. However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
*
* This turns out to be harmless: the only trap which should happen under Linux
* with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
* regions), which has to be reflected through the Host anyway. If another
* trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last. It's *cool*! It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last. It's *cool*! It's in *assembler*!
*
* The "iret" instruction is used to return from an interrupt or trap. The
* stack looks like this:
@@ -148,15 +173,18 @@
* return to userspace or wherever. Our solution to this is to surround the
* code with lguest_noirq_start: and lguest_noirq_end: labels. We tell the
* Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
ENTRY(lguest_iret)
pushl %eax
movl 12(%esp), %eax
lguest_noirq_start:
- /* Note the %ss: segment prefix here. Normal data accesses use the
+ /*
+ * Note the %ss: segment prefix here. Normal data accesses use the
* "ds" segment, but that will have already been restored for whatever
* we're returning to (such as userspace): we can't trust it. The %ss:
- * prefix makes sure we use the stack segment, which is still valid. */
+ * prefix makes sure we use the stack segment, which is still valid.
+ */
movl %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
popl %eax
iret
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d3563..07c3189 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@
lib-y += memcpy_$(BITS).o
ifeq ($(CONFIG_X86_32),y)
+ obj-y += atomic64_32.o
lib-y += checksum_32.o
lib-y += strstr_32.o
lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 0000000..824fa0b
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,230 @@
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+ u32 low = new;
+ u32 high = new >> 32;
+
+ asm volatile(
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "+A" (old), "+m" (*ptr)
+ : "b" (low), "c" (high)
+ );
+ return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+ return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+EXPORT_SYMBOL(atomic64_cmpxchg);
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return old_val;
+}
+EXPORT_SYMBOL(atomic64_xchg);
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+ atomic64_xchg(ptr, new_val);
+}
+EXPORT_SYMBOL(atomic64_set);
+
+/**
+EXPORT_SYMBOL(atomic64_read);
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, new_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+ new_val = old_val + delta;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return new_val;
+}
+EXPORT_SYMBOL(atomic64_add_return);
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+ return atomic64_add_return(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub_return);
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+ return atomic64_add_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_return);
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+ return atomic64_sub_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_return);
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add_return(delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_add);
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub);
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+ u64 new_val = atomic64_sub_return(delta, ptr);
+
+ return new_val == 0;
+}
+EXPORT_SYMBOL(atomic64_sub_and_test);
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+ atomic64_add(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc);
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+ atomic64_sub(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec);
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_and_test);
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(-1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_and_test);
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+ s64 new_val = atomic64_add_return(delta, ptr);
+
+ return new_val < 0;
+}
+EXPORT_SYMBOL(atomic64_add_negative);
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78..ebeafcc 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
* Zero a page.
* rdi page
*/
- ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
CFI_STARTPROC
movl $4096/8,%ecx
xorl %eax,%eax
rep stosq
ret
CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
ENTRY(clear_page)
CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c11..6ba0f7b 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@
jae bad_to_user
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
CFI_ENDPROC
+ENDPROC(copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(copy_from_user)
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 1440b9c..caa24ac 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -89,16 +89,13 @@
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __rdmsr_on_cpu(&rv);
smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(rdmsr_on_cpus);
@@ -121,16 +118,13 @@
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __wrmsr_on_cpu(&rv);
smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(wrmsr_on_cpus);
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91..1f118d4 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@
if (retval == -ENOMEM && is_global_init(current)) {
up_read(¤t->mm->mmap_sem);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto survive;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff..bfae139 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@
}
static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
/*
* No vm86 mode in 64-bit mode:
@@ -696,7 +697,7 @@
if (!printk_ratelimit())
return;
- printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+ printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->ip, (void *)regs->sp, error_code);
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e..2112ed5 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@
EXPORT_SYMBOL(kunmap);
EXPORT_SYMBOL(kmap_atomic);
EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
void __init set_highmem_pages_init(void)
{
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 47ce9a2..0607119 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/proto.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index b177652..6176fe8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,8 +598,15 @@
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
- /* clear the default setting with node 0 */
- nodes_clear(node_states[N_NORMAL_MEMORY]);
+
+ /*
+ * clear the default setting with node 0
+ * note: don't use nodes_clear here, that is really clearing when
+ * numa support is not compiled in, and later node_set_state
+ * will not set it back.
+ */
+ node_clear_state(0, N_NORMAL_MEMORY);
+
free_area_init_nodes(max_zone_pfns);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index c106f78..dce282f 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -592,9 +592,12 @@
unsigned int level;
pte_t *kpte, old_pte;
- if (cpa->flags & CPA_PAGES_ARRAY)
- address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ address = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
@@ -698,9 +701,12 @@
* No need to redo, when the primary call touched the direct
* mapping already:
*/
- if (cpa->flags & CPA_PAGES_ARRAY)
- vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ vaddr = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
vaddr = cpa->vaddr[cpa->curpage];
else
vaddr = *cpa->vaddr;
@@ -998,12 +1004,15 @@
int _set_memory_wc(unsigned long addr, int numpages)
{
int ret;
+ unsigned long addr_copy = addr;
+
ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
if (!ret) {
- ret = change_page_attr_set(&addr, numpages,
- __pgprot(_PAGE_CACHE_WC), 0);
+ ret = change_page_attr_set_clr(&addr_copy, numpages,
+ __pgprot(_PAGE_CACHE_WC),
+ __pgprot(_PAGE_CACHE_MASK),
+ 0, 0, NULL);
}
return ret;
}
@@ -1120,7 +1129,9 @@
int free_idx;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
goto err_out;
@@ -1133,7 +1144,9 @@
err_out:
free_idx = i;
for (i = 0; i < free_idx; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
@@ -1162,7 +1175,9 @@
return retval;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd..ed34f5e 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@
return pte;
}
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
pgtable_page_dtor(pte);
paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@
}
#if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
{
paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pmd));
}
#if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
{
paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pud));
@@ -329,7 +329,6 @@
printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
(int)-reserve);
__FIXADDR_TOP = -reserve - PAGE_SIZE;
- __VMALLOC_RESERVE += reserve;
#endif
}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9..dbb5381 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@
acpi_numa = -1;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
- for (i = 0; i < MAX_NUMNODES; i++)
- nodes_add[i].start = nodes[i].end = 0;
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ nodes[i].start = nodes[i].end = 0;
+ nodes_add[i].start = nodes_add[i].end = 0;
+ }
remove_all_active_ranges();
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d..89b9a5c 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@
static int force_arch_perfmon;
static int force_cpu_type(const char *str, struct kernel_param *kp)
{
- if (!strcmp(str, "archperfmon")) {
+ if (!strcmp(str, "arch_perfmon")) {
force_arch_perfmon = 1;
printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626d..1014eb4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@
unsigned long flags;
struct resource *root;
int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+ u64 start, end;
+
+ if (bus_has_transparent_bridge(info->bus))
+ max_root_bus_resources -= 3;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@
} else
return AE_OK;
- res = &info->res[info->res_num];
- res->name = info->name;
- res->flags = flags;
- res->start = addr.minimum + addr.translation_offset;
- res->end = res->start + addr.address_length - 1;
- res->child = NULL;
-
- if (bus_has_transparent_bridge(info->bus))
- max_root_bus_resources -= 3;
+ start = addr.minimum + addr.translation_offset;
+ end = start + addr.address_length - 1;
if (info->res_num >= max_root_bus_resources) {
printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s due to _CRS returning more than "
- "%d resource descriptors\n", (unsigned long) res->start,
- (unsigned long) res->end, root->name, info->name,
+ "%d resource descriptors\n", (unsigned long) start,
+ (unsigned long) end, root->name, info->name,
max_root_bus_resources);
- info->res_num++;
return AE_OK;
}
+ res = &info->res[info->res_num];
+ res->name = info->name;
+ res->flags = flags;
+ res->start = start;
+ res->end = end;
+ res->child = NULL;
+
if (insert_resource(root, res)) {
printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@
}
static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- int i;
- u16 class = dev->class >> 8;
-
- if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- dev->subordinate->resource[i] =
- dev->bus->resource[i - 3];
- }
- }
-}
-
-static void
get_current_resources(struct acpi_device *device, int busnum,
int domain, struct pci_bus *bus)
{
@@ -158,8 +144,6 @@
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
- if (info.res_num)
- adjust_transparent_bridge_resources(bus);
return;
@@ -222,8 +206,15 @@
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
- } else
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ } else {
+ bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+ if (bus) {
+ if (pci_probe & PCI_USE__CRS)
+ get_current_resources(device, busnum, domain,
+ bus);
+ bus->subordinate = pci_scan_child_bus(bus);
+ }
+ }
if (!bus)
kfree(sd);
@@ -238,8 +229,6 @@
#endif
}
- if (bus && (pci_probe & PCI_USE__CRS))
- get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a..3ffa10d 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@
int j;
struct pci_root_info *info;
- /* don't go for it if _CRS is used */
- if (pci_probe & PCI_USE__CRS)
+ /* don't go for it if _CRS is used already */
+ if (b->resource[0] != &ioport_resource ||
+ b->resource[1] != &iomem_resource)
return;
/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@
if (i == pci_root_num)
return;
+ printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+ b->number);
+
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 0fb56db..52e62e5 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -35,6 +35,7 @@
#include <asm/pat.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
+#include <asm/io_apic.h>
static int
@@ -227,6 +228,12 @@
pcibios_allocate_resources(1);
e820_reserve_resources_late();
+ /*
+ * Insert the IO APIC resources after PCI initialization has
+ * occured to handle IO APICS that are mapped in on a BAR in
+ * PCI space, but before trying to assign unassigned pci res.
+ */
+ ioapic_insert_resources();
}
/**
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd..a6a198c 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
# __restore_processor_state() restores %gs after S3 resume and so should not
# itself be stack-protected
nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o := $(nostackp)
+CFLAGS_cpu.o := $(nostackp)
obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o