arch/mips/pci/pci-ddb5074.c

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>

#include <asm/debug.h>

#include <asm/ddb5xxx/ddb5xxx.h>

static struct resource extpci_io_resource = {
	"pci IO space",
	0x1000,			/* leave some room for ISA bus */
	DDB_PCI_IO_SIZE - 1,
	IORESOURCE_IO
};

static struct resource extpci_mem_resource = {
	"pci memory space",
	DDB_PCI_MEM_BASE + 0x00100000,	/* leave 1 MB for RTC */
	DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
	IORESOURCE_MEM
};

extern struct pci_ops ddb5476_ext_pci_ops;

struct pci_controller ddb5476_controller = {
	.pci_ops	= &ddb5476_ext_pci_ops,
	.io_resource	= &extpci_io_resource,
	.mem_resource	= &extpci_mem_resource,
};

#define     PCI_EXT_INTA        8
#define     PCI_EXT_INTB        9
#define     PCI_EXT_INTC        10
#define     PCI_EXT_INTD        11
#define     PCI_EXT_INTE        12

#define     MAX_SLOT_NUM        14

static unsigned char irq_map[MAX_SLOT_NUM] = {
  [ 0] = nile4_to_irq(PCI_EXT_INTE),
  [ 1] = nile4_to_irq(PCI_EXT_INTA),
  [ 2] = nile4_to_irq(PCI_EXT_INTA),
  [ 3] = nile4_to_irq(PCI_EXT_INTB),
  [ 4] = nile4_to_irq(PCI_EXT_INTC),
  [ 5] = nile4_to_irq(NILE4_INT_UART),
  [10] = nile4_to_irq(PCI_EXT_INTE),
  [13] = nile4_to_irq(PCI_EXT_INTE),
};

int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
	return irq_map[slot];
}

/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
	return 0;
}

void __init ddb_pci_reset_bus(void)
{
	u32 temp;

	/*
	 * I am not sure about the "official" procedure, the following
	 * steps work as far as I know:
	 * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
	 * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
	 * The same is true for both PCI channels.
	 */
	temp = ddb_in32(DDB_PCICTRL + 4);
	temp |= 0x80000000;
	ddb_out32(DDB_PCICTRL + 4, temp);
	temp &= ~0xc0000000;
	ddb_out32(DDB_PCICTRL + 4, temp);

}