mxc: Change gpt timer code to be more generic by using V2 instead of MX3
Replace mx3_ with v2_ since the register layout is the same for all SoCs using
version 2 of the timer (mx25, mx31, mx37 and now mx51)
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index c1ce51a..714bdef 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -54,14 +54,14 @@
#define MX2_TSTAT_COMP (1 << 0)
/* MX31, MX35, MX25, MXC91231, MX5 */
-#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
-#define MX3_TCTL_CLK_IPG (1 << 6)
-#define MX3_TCTL_FRR (1 << 9)
-#define MX3_IR 0x0c
-#define MX3_TSTAT 0x08
-#define MX3_TSTAT_OF1 (1 << 0)
-#define MX3_TCN 0x24
-#define MX3_TCMP 0x10
+#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_FRR (1 << 9)
+#define V2_IR 0x0c
+#define V2_TSTAT 0x08
+#define V2_TSTAT_OF1 (1 << 0)
+#define V2_TCN 0x24
+#define V2_TCMP 0x10
#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define timer_is_v2() (!timer_is_v1())
@@ -76,7 +76,7 @@
unsigned int tmp;
if (timer_is_v2())
- __raw_writel(0, timer_base + MX3_IR);
+ __raw_writel(0, timer_base + V2_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
@@ -86,7 +86,7 @@
static inline void gpt_irq_enable(void)
{
if (timer_is_v2())
- __raw_writel(1<<0, timer_base + MX3_IR);
+ __raw_writel(1<<0, timer_base + V2_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
timer_base + MXC_TCTL);
@@ -110,9 +110,9 @@
return __raw_readl(timer_base + MX1_2_TCN);
}
-static cycle_t mx3_get_cycles(struct clocksource *cs)
+static cycle_t v2_get_cycles(struct clocksource *cs)
{
- return __raw_readl(timer_base + MX3_TCN);
+ return __raw_readl(timer_base + V2_TCN);
}
static struct clocksource clocksource_mxc = {
@@ -129,7 +129,7 @@
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
- clocksource_mxc.read = mx3_get_cycles;
+ clocksource_mxc.read = v2_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
@@ -153,16 +153,16 @@
-ETIME : 0;
}
-static int mx3_set_next_event(unsigned long evt,
+static int v2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+ tcmp = __raw_readl(timer_base + V2_TCN) + evt;
- __raw_writel(tcmp, timer_base + MX3_TCMP);
+ __raw_writel(tcmp, timer_base + V2_TCMP);
- return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
+ return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
-ETIME : 0;
}
@@ -192,8 +192,8 @@
if (mode != clockevent_mode) {
/* Set event time into far-far future */
if (timer_is_v2())
- __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
- timer_base + MX3_TCMP);
+ __raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
+ timer_base + V2_TCMP);
else
__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
timer_base + MX1_2_TCMP);
@@ -245,7 +245,7 @@
uint32_t tstat;
if (timer_is_v2())
- tstat = __raw_readl(timer_base + MX3_TSTAT);
+ tstat = __raw_readl(timer_base + V2_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -276,7 +276,7 @@
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
- clockevent_mxc.set_next_event = mx3_set_next_event;
+ clockevent_mxc.set_next_event = v2_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
@@ -308,7 +308,7 @@
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;