libertas: convert SNMP_MIB to a direct command
And support setting both long and short retries independently.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index a916bb9..5004d76 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -9,17 +9,6 @@
#define DEFAULT_AD_HOC_CHANNEL 6
#define DEFAULT_AD_HOC_CHANNEL_A 36
-/** IEEE 802.11 oids */
-#define OID_802_11_SSID 0x00008002
-#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
-#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
-#define OID_802_11_RTS_THRESHOLD 0x0000800A
-#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
-#define OID_802_11_SUPPORTED_RATES 0x0000800E
-#define OID_802_11_STATISTICS 0x00008012
-#define OID_802_11_TX_RETRYCOUNT 0x0000801D
-#define OID_802_11D_ENABLE 0x00008020
-
#define CMD_OPTION_WAITFORRSP 0x0002
/** Host command IDs */
@@ -191,6 +180,19 @@
#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
#define CMD_WAKE_METHOD_GPIO 0x0002
+/* Object IDs for CMD_802_11_SNMP_MIB */
+#define SNMP_MIB_OID_BSS_TYPE 0x0000
+#define SNMP_MIB_OID_OP_RATE_SET 0x0001
+#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
+#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
+#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
+#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
+#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
+#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
+#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
+#define SNMP_MIB_OID_11D_ENABLE 0x0009
+#define SNMP_MIB_OID_11H_ENABLE 0x000A
+
/* Define action or option for CMD_BT_ACCESS */
enum cmd_bt_access_opts {
/* The bt commands start at 5 instead of 1 because the old dft commands