Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
diff --git a/sound/core/seq/seq_midi_emul.c b/sound/core/seq/seq_midi_emul.c
index d7c4fb8..17b3e6f 100644
--- a/sound/core/seq/seq_midi_emul.c
+++ b/sound/core/seq/seq_midi_emul.c
@@ -71,7 +71,7 @@
* such as GM, GS and XG.
* There modes that this module will run in are:
* Generic MIDI - no interpretation at all, it will just save current values
- * of controlers etc.
+ * of controllers etc.
* GM - You can use all gm_ prefixed elements of chan. Controls, RPN, NRPN,
* SysEx will be interpreded as defined in General Midi.
* GS - You can use all gs_ prefixed elements of chan. Codes for GS will be
@@ -176,7 +176,7 @@
ev->data.control.value);
break;
case SNDRV_SEQ_EVENT_NONREGPARAM:
- /* Break it back into its controler values */
+ /* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_NONREGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@@ -189,7 +189,7 @@
nrpn(ops, drv, chan, chanset);
break;
case SNDRV_SEQ_EVENT_REGPARAM:
- /* Break it back into its controler values */
+ /* Break it back into its controller values */
chan->param_type = SNDRV_MIDI_PARAM_TYPE_REGISTERED;
chan->control[MIDI_CTL_MSB_DATA_ENTRY]
= (ev->data.control.value >> 7) & 0x7f;
@@ -267,7 +267,7 @@
}
/*
- * Do all driver independent operations for this controler and pass
+ * Do all driver independent operations for this controller and pass
* events that need to take place immediately to the driver.
*/
static void
diff --git a/sound/drivers/opl3/opl3_midi.c b/sound/drivers/opl3/opl3_midi.c
index 1b6f227..3557b6e 100644
--- a/sound/drivers/opl3/opl3_midi.c
+++ b/sound/drivers/opl3/opl3_midi.c
@@ -808,7 +808,7 @@
}
/*
- * Deal with a controler type event. This includes all types of
+ * Deal with a controller type event. This includes all types of
* control events, not just the midi controllers
*/
void snd_opl3_control(void *p, int type, struct snd_midi_channel *chan)
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index 4a7367a..c1af28f 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -623,7 +623,7 @@
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
- /* Set DMA controler */
+ /* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
return 0;
@@ -689,7 +689,7 @@
(snd_pcm_format_width(runtime->format) == 16 ? 0x04 : 0x00) |
(snd_pcm_format_unsigned(runtime->format) ? 0x00 : 0x20));
- /* Set DMA controler */
+ /* Set DMA controller */
snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
return 0;
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index 8a61a11..24460a5 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -498,8 +498,8 @@
int i;
spin_lock(&au1000->ac97_lock);
-/* would rather use the interupt than this polling but it works and I can't
-get the interupt driven case to work efficiently */
+/* would rather use the interrupt than this polling but it works and I can't
+get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;
@@ -535,8 +535,8 @@
int i;
spin_lock(&au1000->ac97_lock);
-/* would rather use the interupt than this polling but it works and I can't
-get the interupt driven case to work efficiently */
+/* would rather use the interrupt than this polling but it works and I can't
+get the interrupt driven case to work efficiently */
for (i = 0; i < 0x5000; i++)
if (!(au1000->ac97_ioport->status & AC97C_CP))
break;
diff --git a/sound/pci/au88x0/au88x0.c b/sound/pci/au88x0/au88x0.c
index f70286a..26819e2 100644
--- a/sound/pci/au88x0/au88x0.c
+++ b/sound/pci/au88x0/au88x0.c
@@ -191,7 +191,7 @@
/* Init audio core.
* This must be done before we do request_irq otherwise we can get spurious
- * interupts that we do not handle properly and make a mess of things */
+ * interrupts that we do not handle properly and make a mess of things */
if ((err = vortex_core_init(chip)) != 0) {
printk(KERN_ERR "hw core init failed\n");
goto core_out;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 91651bd..e6a67b5 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -264,7 +264,7 @@
}
/*
- * Power down the audio subsytem pmdown_time msecs after close is called.
+ * Power down the audio subsystem pmdown_time msecs after close is called.
* This is to ensure there are no pops or clicks in between any music tracks
* due to DAPM power cycling.
*/
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index b3193e6..29a546f 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -24,7 +24,7 @@
* o Automatic Mic Bias support
* o Jack insertion power event initiation - e.g. hp insertion will enable
* sinks, dacs, etc
- * o Delayed powerdown of audio susbsytem to reduce pops between a quick
+ * o Delayed powerdown of audio susbsystem to reduce pops between a quick
* device reopen.
*
* Todo:
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 3733118..478369b 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -317,7 +317,7 @@
/*
- * Deal with a controler type event. This includes all types of
+ * Deal with a controller type event. This includes all types of
* control events, not just the midi controllers
*/
void